# Delete Entire Row If Cell Greater Than Or Equal To 1?

Jul 12, 2012i have table of values if any value in the coulomb G and I greater than or equal to 1 the entire row must be deleted how can i do this ?

View 4 Repliesi have table of values if any value in the coulomb G and I greater than or equal to 1 the entire row must be deleted how can i do this ?

View 4 RepliesADVERTISEMENT

I need an easy code that searches all of column A and deletes the entire row if the cell has the value "-". It needs to find the last row of data using something like LastRow = Range("A" & Rows.Count).End(xlUp).Row

View 4 Replies View RelatedStarting in cell F3, if Column F is greater than or equal to zero, delete the entire row and continue deleting rows until Column A has contents in it. Then go to Column F in that same row that had contents in Column A, if the contents in that row of Column F are greater than or equal to zero, delete the entire row and continue deleting rows until Column A has contents in it. Persist with this pattern until every row in Column F has been checked.

View 4 Replies View RelatedI need automatically deleting of whole row based on cell value, if value of cell which is in h:mm format, is less than or equal to 2:00 (h:mm)

So far I got.

Code:

Sub FillDownFormula()

Code:

Range("L2").Formula = "=RC[-3]-RC[-2]"

Range("L3").Select

Columns("l:l").Select

Selection.NumberFormat = "h:mm"

Dim rng As Range

[Code] .........

I am using cell V7 to input the formula but I want cell V7 to tell me if the number in U7 is greater than or equal to the individual #'s in cells U7-U40 and I would like it to put a 1,2,3 in the cells of V7-V40 for the three highest numbers in order of largest to smallest if is this possible?

View 3 Replies View Related1. jump to any cell > 100000

or

2. write a formula to check entire range of sheet for any one cell over this amount... maybe returning TRUE if so, FALSE if not?

The code below is an attempt to delete all rows where the cell in column A is not equal to the value of B1. B1 is text if that somehow makes a difference.

Dim n As Long, lastrow As Long

lastrow = Range("A65536").End(xlUp).Row

For n = lastrow To 1 Step -1

If Cells(n, 1) <> Range("B1") Then Cells(n, 1).EntireRow.Delete

Next n

Do I need to specify that B1 will always be the cell to reference (ie $B$1). Edit: Just had an epiphany, I also need it to stop after Row 3. I have some headers and such that I don't want removed.

I have a cell, M87. The score in M87 can be less than 13 or greater than 25. I need a formula within M94 which refers to M87, and outputs depending on the the following criteria. If M87 is less than 13 then output as D. If M87 is 14, 15, 16, or 17 then output as C. If M87 is 18, 19, 20, 21, 22, 23 or 24 then output as B. If M87 is greater than 24 then output as A.

View 3 Replies View RelatedIf A7 is equal to and greater than 95% than B7 is equal to "A". If A7 is equal to 91% but less than 94.99% than B7 is equal to "B"...

View 4 Replies View RelatedI'm trying to sum all values greater than 5,000,00 and less than or equal to 10,000,000. I have this formula:

Code:

=SUMIFS(B6:B1359,B6:B1359,">"&L2,B6:B1359,"=

I am looking for a function like MATCH if the match type were set to -1. However my data is sorted in ascending order. I am mining data from a Pivot Table, and it has dates across the top. Of course the pivot table will have the data sorted in ascending order from left to right. I want to find the first date that is greater than today. With weekends and holidays I can't just use TODAY()+1. Is there a function that can do what I am asking? Also I do not want to change the pivot table itself.

View 9 Replies View RelatedI need a formula that looks at the total in H40 and if the number is between 32 and 40 I need it to return the number then if the number exceds forty I need to multiply the overage by 1.5 and add it to the 8 for a total of 11.

I think it would be something like:

SUMIf(H40>"32",

I am creating my first Userform and having some problems. I take the data supplied by the userform and try to match it as closely as possible to a row of information. Currently I am using four cells to autofilter my spreadsheet data. Two of the cells I am looking for a exact match. The other two cells I am looking for the number that has been input or anything greater than it. Here is the code I have come up with...

View 9 Replies View RelatedHow can I count the number of cells in a range that contain values that are greater than or equal to zero?

View 2 Replies View Relatedi'm trying to create a markscheme progress sheet.

You take a childs actual age in months and years (ie 9.8 for 9years and 8months). They then, in theory, should be at that age level for reading and spelling.

I have the age in B4, the reading in C4 and the spelling in D4. If i use CF to say i want C4 to be red if it's less than B4, Amber if it's the same and green if it's over, as soon as i okay it, C4 goes amber, because it's equal to B4, which is blank. I can get the colours to work, i just can't figure out what to put to turn the amber off when cell B4 is empty.

I've tried as many combinations as my little amount of excel knowledge can cope with.

I have start date(Column A) and an end date(Column B) in two columns and I have found out the difference between them in column C in hh:mm:ss format. I want to find out how many cases are greater than 2 Hrs but less than or equal to 4 Hrs.

View 9 Replies View RelatedI would like to have a complete column compared with its immediate next values and delete the values whose difference is more dhan 5.Im new to VB programming.

D

12.90

13.34

19.90

26.90

21.55

If dis is my set of data how should i use range values?

Need a formula for counting how many consecutive cells where the value is gretaer than or equal to +1

For example 1,

J18 = 7

K18 = 9

L18 = 3

M18 = 2

N18 = 8

O18 = 1

P18 = 8

Q18 = -17

In the above example the result would be 7

Example 2:

J12 = -22

K12 = 9

L12 = 4

In the above example the result would be 0 since the 1st value was -22

I am revising a spreadsheet to automate some cells and size cable for my job. I am currently using the VLOOKUP command to search a table for the proper ampacity and return a cable size based on the minimum circuit amps. The problem however is the VLOOKUP command searches for a number equal to or less than my circuit amps and returns this cable size. I need it to return a size equal to or greater than the minimum circuit amps. How do I get it to lookup something equal to or greater than the minimum amount?

View 9 Replies View RelatedI have a sheet in Excel 2004 for Mac that is a patient list with over 2000 patients. I need a rule that will compare values (patient IDs and responsible party ID) in two adjacent cells, if the values are different, to delete the entire row. The goal is to get rid of patients (rows) that are not the responsible party (responsible party ID).

View 3 Replies View RelatedI want to display a warning pop up message when the following cells (Cell A1:A10) is greater and equal to 3.

I would like some code in VBA

In my Excel spreadsheet I enter todays date in a single cell (A2), then I list various dates that jobs come into shop in other cells (A8:A108). I have cells ( F8:F108) where I have been manually entering an asterik (*) for those jobs equal to or greater than five days old in cell (A2). Is there a formula that can do the math for me? I've tried Excel help but to no avail.

View 3 Replies View RelatedI would like to create a VBA code where it will delete the entire column if the cell value is equal to value in D2

For example:

Sub Delete_Columns()

Dim rng As Range, cell As Range, del As Range

Set rng = Intersect(Range("G2:S43"), ActiveSheet.UsedRange)

For Each cell In rng

If (cell.Value) = D2 _

Then

If del Is Nothing Then

Set del = cell

Else: Set del = Union(del, cell)

End If

End If

Next cell

On Error Resume Next

del.EntireColumn.Delete

End Sub

======

But I think this line is wrong but I am not sure how to fix it - If (cell.Value) = D2 _

I have what may be a math question as much as an Excel question. See my attached spreadsheet example in which I grow the denominator of a ratio by a fixed percentage until it equals or exceeds the numerator. This results in the denominator being grown X number of times.

View 2 Replies View RelatedI have a file with 238 rows and 10 columns (see file attached) Column G include phone numbers, some phone numbers are duplicated.

How can I use a macro (I must do it with a macro) to delete the ENTIRE row if the value in column G is the same in other row?

For example: look at rows 2 and 3 : the value in column G2 and G3 is the same, therefor delete row 3

(and if the value in G4 was also the same, then delete also row 4, and so on..)

I can't get this code to work which I want to delete the entire row if the cell in the specified range contains only 3 characters;

Code:

Sub CharCount()

Dim cell As Range

Dim bottomK As Integer

bottomK = Range("D" & Rows.Count).End(xlUp).Row

Dim rng As Range

Set rng = Range("D2:D" & bottomK)

For Each cell In rng

If Len(cell) = 3 Then

EntireRow(bottomK).Delete

End If

Next cell

End Sub

VBA codes in filtering blanks.

Here is a screenshot, and what i want to do is to delete the entire row that has a blank cell. In which here, the 5th row, 7th row and 9th row.

Looking to write a macro to delete an entire row if the word GROWTH is found in any cell under Column C.

View 9 Replies View RelatedI have a row range 5:20004. In that row range column R may have 'QLD' in the cell.

I am trying to delete all rows within that range that have QLD in column R or delete the row if R <> 'NSW' (would be a better way just in case there is something other than QLD)

to do this on opening the file automatically.

I need to write a macro that will search column A and find the word hospital or HOSPITAL and if found delete the entire row. The code I have below will do this ONLY if hospital or HOSPITAL is the only word in the cell. However in my column A there are numerous words in each cell i.e Saint Mary's Hospital.

Sub KillRows()

Dim rngNew As Range

Dim rngDelete As Range

Dim aCell As Range

Dim lastrow As Long

Set rngDelete = Nothing

Set rngNew = Worksheets("Sheet1").Range("A1", Range("A65536").End(xlUp))

rngNew.Select

For Each aCell In Selection

Select Case aCell.Value...........

Copyrights 2005-15 www.BigResource.com, All rights reserved