I want to know if there is a way to delete an entire row from an array? I have a 2 dimensional array and I want to loop through the elements in the first column and delete an entire row based on some conditions. Since the number of rows are too many usual looping takes a long time so I want to use an array.
View 9 RepliesI have a workbook with about 700 rows and about 40 records on each row. about 2-7 a day of these.
The procedure I currently use a loop for does 2 different things.
1 I collect only a few of the records from the line and place them in a separate sheet .I collect the individual data, identify the ID ( cell F) and then search for the corresponding ID on a nother sheet when I do find it I add the info to the sheet on the last + next row. (I sort later)
2 I collect the entire row and place it on yet a nother sheet.
The whole row has information that is categorised by the content of Cell A (name) so I copy the row and paste it into a separate sheet.
What I would idealy like to do is to copy the entire source sheet into an array once, and then copy the data into each target sheet using a loop to get each record from the array. Using only 1 loop to first read the separate data from the " array row" and place it into the first target sheet (procedure 1) and then switch the workbook and copy the whole "array row" into the target sheet there (procedure 2).
At the moment I read info on 1 row switch to the target sheet and place the information there, then I "copy" the row and switch to the next workbook and paste it there then I go back to the source and do the next row.
Obviously Im no programer and that was the best way of doing what I didnt know how to do better .
Is there a way that a whole row can be stored in an array and then 'copied' onto another row on a nother sheet without reading in the individual cells into separate elements. That would be the worse case scenario but a much faster way of doing what I curently have.
I have an array formula that I need to copy down the entire column. The formula is:
=SUM(IF(IF(K$2>=V3:V5,V3:V5-V2:V4,$K$2-V2:V4+1)>0,IF(K$2>=V3:V5,V3:V5-V2:V4,$K$2-V2:V4+1),0)*W2:W4)
I need the Row values to change, not the "array formula parts" (because I don't know what they really are called). So, as I copy down I need the new formula to read:
=SUM(IF(IF(K$4>=V3:V5,V3:V5-V2:V4,$K$4-V2:V4+1)>0,IF(K$4>=V3:V5,V3:V5-V2:V4,$K$4-V2:V4+1),0)*W2:W4)
The only way I've been able to do that is to rewrite the whole formula in the new row cell.
Passing an entire dimension of an array to a function....
View 13 Replies View RelatedHow would i search the entier worksheet im in, looking at column b only, and delete the entire row if i find the word Date in it.
View 9 Replies View Relatedwhen i delete the entirerow, it shifts the rows up (which is what I want) but it skips that row when it does.
so if I have 2 blank cells together it will delete the 1st and leave the 2nd blank.
Sub ()
Dim myrange As Range
Set myrange = ("a:a")
For Each c In myrange
If c.Value = "" Or c.Value <= 5 Then
c.EntireRow.Delete
End If
Next
End Sub
I have a table with subtotals that I need to find the largest value for the subtotal results and then return the cell contents for the corresponding row.
I have attempted to use the hlookup function, but keep getting a #ref error (probably because I am just not that familiar with the entire formula requirements).
I attempted to nest in the 'largest' function to the lookup function, but have so far been stymied....
I'm working on Outlook 2003 and Word 2000 which are not compatible. I have an
Excel Sheet which are my contacts from Outlook and I want to re-work it to
have only a certain category left.
I need a macro that does
- search a certain column
- deletes the row if it does NOT find a certain condition
Ideal would be a little pop up window to enter which category I want left.
I written one code to delete Entirerow if value match. It's working fine .the code delete all match except one match.!
-------------------------------------------------
Option Compare Text
Sub delete_duplicate()
Cells(Rows.Count, 1).End(xlUp).Select
Range(ActiveCell, Range("A1")).Select
For Each cell In Selection
If cell.Value = "Already updated" Then
cell.EntireRow.Delete
End If
Next
End Sub
-----------------------------------
I'm having some problem with a part of my code that deletes entire columns. With ActiveCell as my reference, I want to delete 'Abs_Diff' Columns to the left hand side of the ActiveCell column, including the ActiveCell column. 'Abs_Diff' is a variable of integer type.
SO if ActiveCell column is "P" and 'Abs_Diff'=2, then delete Columns "O:P"
if ActiveCell column is "P" and 'Abs_Diff'=4, then delete Columns "M:P"
My code is selecting columns incorrectly, maybe due to merged cells in cols A,B,C or something..not sure.
Here is my code:
Code:
'DELETE COLUMNS
Set StartPoint = ActiveCell
For X = 1 To Abs_Diff
StartPoint.EntireColumn.Delete
Set StartPoint = ActiveCell.Offset(0, -1)
Next X
If column B contains the word FALSE, I need to delete that entire row, then I need to repeat this action on 11 sheets out of 14 on one workbook, in one action.
View 6 Replies View RelatedI use the code below to delete the entire row that has the Text "Pc." in it. How can I make this delete the row with "Pc." plus the next row?
Sub PL()
Dim i As Long
For i = Cells(Rows.Count, "A").End(xlUp).Row To 1 Step -1
If InStr(Cells(i, "A").Text, "Pc.") Then
Cells(i, "A").EntireRow.Delete
End If
Next i
End Sub
i have over around 1500 pfolios in Col A, i need macro that will delete entire row which has the highlighted pfolios. Now i tried advanced filter which would work but the date in Col A6 will change every month, so dont want to go down that road, is there alternative option other than advanced filter ..
View 9 Replies View RelatedI am trying to Lookup multiple values (can't be done manually) in one report (Report 2) from another (Report 1).
If the value from Report 1 isn't present in Report 2, I want the entire row the value is found in (From Report 1) deleted.
I've a worksheet containing a list of items some of which need deleting. These are identified from a particular range where users input "y" to notifiy the record can be removed. The code below works just fine if all I do is Clear the cells containing "y". However using: Range(rCell.Address).EntireRow.Delete
the macro stops after deleting the first item. It suddenly believes there aren't any further items to delete and Ends. There are no error messages returned. Entire macros is below.
Sub unreg_report()
Dim rRange As Range, rCell As Range
Set rRange = Range("unreg_list").SpecialCells _
(xlCellTypeConstants, xlTextValues)
For Each rCell In rRange
If rCell = "y" Then
Range(rCell.Address).EntireRow.Delete
End If
Next rCell
End Sub
How to copy the content of cells from an excell->sheet1 to an string array
View 2 Replies View RelatedI have two worksheet. One worksheet (ws1) contains a list of item I want. The other sheet (ws2) contains multiple columns where the header (row 6) is named by item name.
I have the following code which deletes the entire column if the header name is not in the list contained in ws1 :
VB:
Sub delete_col()
Dim wanted As Boolean
Set ws1 = Workbooks("test1").Sheets("aaa")
[Code]....
First of all, this loop does not work properly since deleting the entire column shift them on the left, so when I first analyze column 11, if I delete it and then analyze column 12, the real column 12 now became column 11 and so on...
Secondly, this code is pretty slow. I am pretty sure I don't have to loop through my initial item list everytime I do Instr on a new column.
I have columns
Row 1 is heading..
IF Column C doesn't have data in entire column then delete C D E F
IF Column D doesn't have data in entire column then delete D E F
IF Column E doesn't have data in entire column then delete E F
IF Column F doesn't have data in entire column then delete F
Same way for heading NN's
IF Column G doesn't have data in entire column then delete G H I J K L M N
IF Column H doesn't have data in entire column then delete H I J K L M N
IF Column I doesn't have data in entire column then delete I J K L M N
IF Column J doesn't have data in entire column then delete J K L M N
IF Column K doesn't have data in entire column then delete K L M N
IF Column L doesn't have data in entire column then delete L M N
IF Column M doesn't have data in entire column then delete M N
IF Column N doesn't have data in entire column then delete N
i want to delete entire row if D2:D10000 has a numeric value e.g .111 to 100000.1114
View 4 Replies View Relatedi want to delete entire row if Column C2:C1000 are blank
e.g if range c2:c100 have data then delete the rows C101:C1000
I have fixed headers on row 16, from columns A-AC.
I want to be able to delete the entire column, if the row has a certain string, such as "Chart ID" .
I also want to expand it to include other strings such as "Month" and "Source" . So if it contains any of these words, the columns should be deleted. It should be an exact match (as other headers contain the word "month").
I have table in which against the Column A data values are added in Column B, C and D.
If Column B,C and D cell values is 0, then I want entire row including A to be deleted. How can I do this in VBA?
Note: Column A data begins from Row 15 and below.
Just to avoid confusion. I want row deletion, only when all the three cell on B,C and D is = 0
I have a file with 238 rows and 10 columns (see file attached) Column G include phone numbers, some phone numbers are duplicated.
How can I use a macro (I must do it with a macro) to delete the ENTIRE row if the value in column G is the same in other row?
For example: look at rows 2 and 3 : the value in column G2 and G3 is the same, therefor delete row 3
(and if the value in G4 was also the same, then delete also row 4, and so on..)
I have a problem deleting rows based on a condition, i didn't know how to use offset method.
i'm using a table like this one :
A B C
1 Main design1 FFR0
2 Extra design2 FFR0
3 Main design3 FFR0
4 Extra design4 FFR0
.
.
n Main designn FFR0
I want to delete entire row if "FFR0" in column C exists in a row beginning by "EXTRA" (column A)
I have a worksheet where I have restricted the users from scrolling around beyond a certain range.
Because of that the user is prevented from selecting an entire row.
There are some cases where the user should be able to delete entire row or range of rows.
How can I allow them to select say cells "C17:C35" [they would just hoghlight the range] and hit ctrl+d; which would trigger a macro and the macro in turn would delete all the rows in that selection [rows 17 through 35]?
I know some basic codes for deleting entire rows, but I don't know how to read first and last row of the selection under Target property.
In range A1:A300 I have a lotof words. What I want is to delete entire row if the cell value is Open date
View 3 Replies View RelatedI need to delete entire row of the result of autofiltering i.e. the visible rows only
If I do this manualy it works but if I record this on a macro, it records the absolute cells range I pick, when in fact the result of the filtering is different every time.
Is there a way around this with VBA?
I've Seen Copy paste in this forum but in my case i need to delete the entire row.
Ihave a list of names in column A in certain rows instead of name there is an email address in this case I want to delete the entire row
View 4 Replies View RelatedI have worksheet, whose snapshot is given under (in reality, there are over 2000+ rows in worksheets)
I want a Macro which can perform following function in entire worksheet used range
Only retain the rows where the cell value in current row is identical BOTH in Column B, as well as column D in its immediate previous row
i.e. B14=B13 and ALSO D14=D13 (both condition should be valid, if not Delete entire ROW, i.e. having unique value)
Normally, ppl wish to delete the duplicates, but i want to retain the duplicate as identical data is of two different dates, control in Column O
My Worksheet looks like - [URL]
I can't get this code to work which I want to delete the entire row if the cell in the specified range contains only 3 characters;
Code:
Sub CharCount()
Dim cell As Range
Dim bottomK As Integer
bottomK = Range("D" & Rows.Count).End(xlUp).Row
Dim rng As Range
Set rng = Range("D2:D" & bottomK)
For Each cell In rng
If Len(cell) = 3 Then
EntireRow(bottomK).Delete
End If
Next cell
End Sub