Delete Entire Row Based On Specific Value?
Jul 18, 2012Ihave a list of names in column A in certain rows instead of name there is an email address in this case I want to delete the entire row
View 4 RepliesIhave a list of names in column A in certain rows instead of name there is an email address in this case I want to delete the entire row
View 4 RepliesI have table in which against the Column A data values are added in Column B, C and D.
If Column B,C and D cell values is 0, then I want entire row including A to be deleted. How can I do this in VBA?
Note: Column A data begins from Row 15 and below.
Just to avoid confusion. I want row deletion, only when all the three cell on B,C and D is = 0
I have a problem deleting rows based on a condition, i didn't know how to use offset method.
i'm using a table like this one :
A B C
1 Main design1 FFR0
2 Extra design2 FFR0
3 Main design3 FFR0
4 Extra design4 FFR0
.
.
n Main designn FFR0
I want to delete entire row if "FFR0" in column C exists in a row beginning by "EXTRA" (column A)
I have a worksheet where I have restricted the users from scrolling around beyond a certain range.
Because of that the user is prevented from selecting an entire row.
There are some cases where the user should be able to delete entire row or range of rows.
How can I allow them to select say cells "C17:C35" [they would just hoghlight the range] and hit ctrl+d; which would trigger a macro and the macro in turn would delete all the rows in that selection [rows 17 through 35]?
I know some basic codes for deleting entire rows, but I don't know how to read first and last row of the selection under Target property.
Simple code that can delete entire row if certain criteria is met in a single cell
Example
I have a bank statement where under a first column (DATA TYPE), the cell could contain either "DATA" or "TOTAL"
How can I delete the rows contain the word "TOTAL" assuming the column is already sorted.
I have got a vacancy tracker spreadsheet and I need it to move an entire row from the 'Open' to the 'Closed' sheet based on the status in column K, i.e. 'Closed +', 'Closed -', and 'Closed + Achieve'. Once this has been done I want it to delete the entire row in the 'Open' sheet. At the moment it just cuts the entire row and then it is left blank and when I delete it manually the macro stops working completely.
Also I can only get it to move 'Closed +' and 'Closed -' and seem not to be able to add a command to move 'Closed + Achieve' rows.
This is what I have got so far:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Columns("K")) Is Nothing Then Exit Sub
Application.EnableEvents = False
If Target.Value = "Closed +" Then
[Code] .......
I used this macro to find the duplicates in column B:
Sub KryDups()
ScreenUpdating = False
FirstItem = ActiveCell.Value
SecondItem = ActiveCell. Offset(1, 0).Value
Offsetcount = 1
Do While ActiveCell <> ""
If FirstItem = SecondItem Then
ActiveCell.Offset(Offsetcount, 0).Interior.Color = RGB(255, 0, 0)
Offsetcount = Offsetcount + 1
SecondItem = ActiveCell.Offset(Offsetcount, 0).Value
Else
ActiveCell.Offset(Offsetcount, 0).Select
FirstItem = ActiveCell.Value
SecondItem = ActiveCell.Offset(1, 0).Value
Offsetcount = 1
End If
Loop
ScreenUpdating = True
End Sub
The duplucate cells are now red in color. (RGB(255, 0, 0)). How do I now code VB to delete the rows in column B where the cell color is red? Here is some of the code that I tried:................
I have been trying to find a way of formatting an entire row based on the contents of cells in each column. However i come unstuck when trying to make the column dynamic. Below is an example:
Month
2010
2011
2012
[Code]....
The idea is that i say current year is 2011 and all rows where C contains an a will turn green. What i would like to achieve is that when i change current year to say 2012 the conditional formatting adjusts so that it looks at D instead of C.
I know it can delete entire rows based on the value of single cell, I just don't know how to do it. So what I need is a macro that will delete an entire row if the value in a particular column = 0.
More details: ....
Each week I run a report that produces over 2,000 rows. I have to manually go through and delete things, by the time I am done, there may only be 320 rows left. I would apply a recorded macro, but the report is not consistent each week. There may be more or fewer rows depending on the week.
I would like to be able to run a macro that looks in column B for a specific value and if it contains that specific value, I would like the cells to the right of it to have their contents cleared.
Next, in column C, I have...
Employee2's Name
Employee2's Number
SPACE
[Code]....
I would like to be able to delete the rows, starting from Employee 2 to just before the second SUB TOTAL.
So, all I would have left in column C is
SUB TOTAL
SPACE
How would i search the entier worksheet im in, looking at column b only, and delete the entire row if i find the word Date in it.
View 9 Replies View Relatedwhen i delete the entirerow, it shifts the rows up (which is what I want) but it skips that row when it does.
so if I have 2 blank cells together it will delete the 1st and leave the 2nd blank.
Sub ()
Dim myrange As Range
Set myrange = ("a:a")
For Each c In myrange
If c.Value = "" Or c.Value <= 5 Then
c.EntireRow.Delete
End If
Next
End Sub
I plucked a macro off an old post from here (as I always do), but I'm having trouble tweaking it.
VB:
Sub completedtest()
Dim c As Range
Dim rngG As Range
For Each c In Intersect(ActiveSheet.UsedRange, Columns("i"))
[Code] ....
As it currently stands, the macro selects the entire row of rows containing the letter Y in column I. All I need to change is, I want to simply select columns B through I, rather than the entire row.
I've been tasked with developing a macro that will generate schedules. For background, we're taking a QuickBooks Customer file and exporting it to be picked up by the macro. I've got that part working, but now I need to delete various rows based on certain criteria.
The spreadsheet has a field for Job Status which we use to define whether an account is under contract (2 in QuickBooks), or some other status. Basically what I need to do is delete the entire row of data where JobStatus (Column R) is anything but 2.
I'm working on Outlook 2003 and Word 2000 which are not compatible. I have an
Excel Sheet which are my contacts from Outlook and I want to re-work it to
have only a certain category left.
I need a macro that does
- search a certain column
- deletes the row if it does NOT find a certain condition
Ideal would be a little pop up window to enter which category I want left.
I written one code to delete Entirerow if value match. It's working fine .the code delete all match except one match.!
-------------------------------------------------
Option Compare Text
Sub delete_duplicate()
Cells(Rows.Count, 1).End(xlUp).Select
Range(ActiveCell, Range("A1")).Select
For Each cell In Selection
If cell.Value = "Already updated" Then
cell.EntireRow.Delete
End If
Next
End Sub
-----------------------------------
I'm having some problem with a part of my code that deletes entire columns. With ActiveCell as my reference, I want to delete 'Abs_Diff' Columns to the left hand side of the ActiveCell column, including the ActiveCell column. 'Abs_Diff' is a variable of integer type.
SO if ActiveCell column is "P" and 'Abs_Diff'=2, then delete Columns "O:P"
if ActiveCell column is "P" and 'Abs_Diff'=4, then delete Columns "M:P"
My code is selecting columns incorrectly, maybe due to merged cells in cols A,B,C or something..not sure.
Here is my code:
Code:
'DELETE COLUMNS
Set StartPoint = ActiveCell
For X = 1 To Abs_Diff
StartPoint.EntireColumn.Delete
Set StartPoint = ActiveCell.Offset(0, -1)
Next X
If column B contains the word FALSE, I need to delete that entire row, then I need to repeat this action on 11 sheets out of 14 on one workbook, in one action.
View 6 Replies View RelatedI use the code below to delete the entire row that has the Text "Pc." in it. How can I make this delete the row with "Pc." plus the next row?
Sub PL()
Dim i As Long
For i = Cells(Rows.Count, "A").End(xlUp).Row To 1 Step -1
If InStr(Cells(i, "A").Text, "Pc.") Then
Cells(i, "A").EntireRow.Delete
End If
Next i
End Sub
i have over around 1500 pfolios in Col A, i need macro that will delete entire row which has the highlighted pfolios. Now i tried advanced filter which would work but the date in Col A6 will change every month, so dont want to go down that road, is there alternative option other than advanced filter ..
View 9 Replies View RelatedI am trying to Lookup multiple values (can't be done manually) in one report (Report 2) from another (Report 1).
If the value from Report 1 isn't present in Report 2, I want the entire row the value is found in (From Report 1) deleted.
I want to know if there is a way to delete an entire row from an array? I have a 2 dimensional array and I want to loop through the elements in the first column and delete an entire row based on some conditions. Since the number of rows are too many usual looping takes a long time so I want to use an array.
View 9 Replies View RelatedI've a worksheet containing a list of items some of which need deleting. These are identified from a particular range where users input "y" to notifiy the record can be removed. The code below works just fine if all I do is Clear the cells containing "y". However using: Range(rCell.Address).EntireRow.Delete
the macro stops after deleting the first item. It suddenly believes there aren't any further items to delete and Ends. There are no error messages returned. Entire macros is below.
Sub unreg_report()
Dim rRange As Range, rCell As Range
Set rRange = Range("unreg_list").SpecialCells _
(xlCellTypeConstants, xlTextValues)
For Each rCell In rRange
If rCell = "y" Then
Range(rCell.Address).EntireRow.Delete
End If
Next rCell
End Sub
I'm trying to copy entire row from sheet "source" to sheet "output".
Condition: If cell or cells in range (E7: lastcoll, lastrow) value is "A" then copy entire row.
Find the excel template in attachment.
My problem is that my macro is copying particular row, as many times as many "A" finds.
I want to copy entire row just once doesn't matter how many cells with "A" are in particular row.
VB:
'function to find last column a change letter of column to number
Private Function ColLetter(LastCol)
ColLetter = Split(Cells(1, LastCol).Address, "$")(1)
End Function
[Code] .....
copyROW.xlsm
I tried to writer my code myself but I have a long way to go. Here is what I must do for my case:
I want a macro to find the row that include a specific text (For example "SMSC") in a range (A1:A100) then copy this entire row below the cell which has the value "OTHERS". That is, if there are 10 pieces of "SMSC" so these rows including "SMSC" should be listed below the cell "OTHERS"
The following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I also need it to look in column "C" in the ("FY09 SOF") file and pull the entire row if it finds the word "Payroll".
For some reason it will pull everything needed except the "Payroll" rows. What am I doing wrong?
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False..........................
Code that will highlight a entire row when a cell from a column has a value of 0. It will check all the cell from Column C1:C100 and check all the cells that contains a 0 value. Need to highlight the entire row that contains this cell value and fill it in orange color.
View 9 Replies View RelatedCurrently I am using the Kickbutt VBA Find Function of Aaron, but I would like to have something that works more efficiently. What I currently do is (assuming all possible values for Column J are A - F):
Find_Range("A", Columns("J"), MatchCase:=True).EntireRow.Delete
Find_Range("B", Columns("J"), MatchCase:=True).EntireRow.Delete
Find_Range("C", Columns("J"), MatchCase:=True).EntireRow.Delete
Find_Range("D", Columns("J"), MatchCase:=True).EntireRow.Delete
Find_Range("E", Columns("J"), MatchCase:=True).EntireRow.Delete
although I just want some code that says: delete all rows except those that have "F" as content in Column J. I already tried something like:
Range("1:65536").Select
For Each cl In Range("J:J")
If cl.Text = "A" Or cl.Text = "B" Or cl.Text = "C" Or cl.Text = "D" Or cl.Text = "E" Then
Rows(cl.Row).Delete
End If
Next
but it also takes much to long. The major problem I think, is that the number of records is variable so I search the entire worksheet...
I have two worksheet. One worksheet (ws1) contains a list of item I want. The other sheet (ws2) contains multiple columns where the header (row 6) is named by item name.
I have the following code which deletes the entire column if the header name is not in the list contained in ws1 :
VB:
Sub delete_col()
Dim wanted As Boolean
Set ws1 = Workbooks("test1").Sheets("aaa")
[Code]....
First of all, this loop does not work properly since deleting the entire column shift them on the left, so when I first analyze column 11, if I delete it and then analyze column 12, the real column 12 now became column 11 and so on...
Secondly, this code is pretty slow. I am pretty sure I don't have to loop through my initial item list everytime I do Instr on a new column.
I have columns
Row 1 is heading..
IF Column C doesn't have data in entire column then delete C D E F
IF Column D doesn't have data in entire column then delete D E F
IF Column E doesn't have data in entire column then delete E F
IF Column F doesn't have data in entire column then delete F
Same way for heading NN's
IF Column G doesn't have data in entire column then delete G H I J K L M N
IF Column H doesn't have data in entire column then delete H I J K L M N
IF Column I doesn't have data in entire column then delete I J K L M N
IF Column J doesn't have data in entire column then delete J K L M N
IF Column K doesn't have data in entire column then delete K L M N
IF Column L doesn't have data in entire column then delete L M N
IF Column M doesn't have data in entire column then delete M N
IF Column N doesn't have data in entire column then delete N