I have table in which against the Column A data values are added in Column B, C and D.
If Column B,C and D cell values is 0, then I want entire row including A to be deleted. How can I do this in VBA?
Note: Column A data begins from Row 15 and below.
Just to avoid confusion. I want row deletion, only when all the three cell on B,C and D is = 0
I have a problem deleting rows based on a condition, i didn't know how to use offset method.
i'm using a table like this one :
A B C
1 Main design1 FFR0
2 Extra design2 FFR0
3 Main design3 FFR0
4 Extra design4 FFR0
.
.
n Main designn FFR0
I want to delete entire row if "FFR0" in column C exists in a row beginning by "EXTRA" (column A)
I'm working on Outlook 2003 and Word 2000 which are not compatible. I have an
Excel Sheet which are my contacts from Outlook and I want to re-work it to
have only a certain category left.
I need a macro that does
- search a certain column
- deletes the row if it does NOT find a certain condition
Ideal would be a little pop up window to enter which category I want left.
I have a worksheet where I have restricted the users from scrolling around beyond a certain range.
Because of that the user is prevented from selecting an entire row.
There are some cases where the user should be able to delete entire row or range of rows.
How can I allow them to select say cells "C17:C35" [they would just hoghlight the range] and hit ctrl+d; which would trigger a macro and the macro in turn would delete all the rows in that selection [rows 17 through 35]?
I know some basic codes for deleting entire rows, but I don't know how to read first and last row of the selection under Target property.
Ihave a list of names in column A in certain rows instead of name there is an email address in this case I want to delete the entire row
View 4 Replies View RelatedSimple code that can delete entire row if certain criteria is met in a single cell
Example
I have a bank statement where under a first column (DATA TYPE), the cell could contain either "DATA" or "TOTAL"
How can I delete the rows contain the word "TOTAL" assuming the column is already sorted.
I have got a vacancy tracker spreadsheet and I need it to move an entire row from the 'Open' to the 'Closed' sheet based on the status in column K, i.e. 'Closed +', 'Closed -', and 'Closed + Achieve'. Once this has been done I want it to delete the entire row in the 'Open' sheet. At the moment it just cuts the entire row and then it is left blank and when I delete it manually the macro stops working completely.
Also I can only get it to move 'Closed +' and 'Closed -' and seem not to be able to add a command to move 'Closed + Achieve' rows.
This is what I have got so far:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Columns("K")) Is Nothing Then Exit Sub
Application.EnableEvents = False
If Target.Value = "Closed +" Then
[Code] .......
I used this macro to find the duplicates in column B:
Sub KryDups()
ScreenUpdating = False
FirstItem = ActiveCell.Value
SecondItem = ActiveCell. Offset(1, 0).Value
Offsetcount = 1
Do While ActiveCell <> ""
If FirstItem = SecondItem Then
ActiveCell.Offset(Offsetcount, 0).Interior.Color = RGB(255, 0, 0)
Offsetcount = Offsetcount + 1
SecondItem = ActiveCell.Offset(Offsetcount, 0).Value
Else
ActiveCell.Offset(Offsetcount, 0).Select
FirstItem = ActiveCell.Value
SecondItem = ActiveCell.Offset(1, 0).Value
Offsetcount = 1
End If
Loop
ScreenUpdating = True
End Sub
The duplucate cells are now red in color. (RGB(255, 0, 0)). How do I now code VB to delete the rows in column B where the cell color is red? Here is some of the code that I tried:................
I know it can delete entire rows based on the value of single cell, I just don't know how to do it. So what I need is a macro that will delete an entire row if the value in a particular column = 0.
More details: ....
I want to delete a row in excel based on a condition.
The condition is as follows:
I have few rows in the excel where the columns 7,12,13,23 are same and column 24 in one row has some number and in some other row the column 24 is blank with orange color filled(the colorindex for orange is 44).
In this case I want the row with orange color filled in column 24 to be deleted.
i have an issue i need to delete entire row if a condition is met, i need syntax if possible to delete if a cell word "begins with" a certain letter ...in this case...letter A
column is "O"
must search threw entire row
Is it posibile to make a macro that automaticaly delete rows based ona a condition. Condition is to delete rows that have B column value "" or zero. For example:....
View 12 Replies View RelatedI want to be able to delete certain rows based on multiple criteria. If data in the row does not meat the crieteira, it shud be deleted. I have attached the excel file sample in which I want to keep the highlighed rows and detele the rest. Its base on Origin city and Destination city combination. Eg: If Origin city="A" and Destination City = "B", I want to keep the row. Like wise for all highlighted rows. but if the Origin City = "B" and Destination City = "U" I want to delete the row.
View 9 Replies View Relatedi have a set of data as below and wish to delete ENTIRE ROW if cell is the same but keep the first entry when code comes to it..ie in the data set below excel would keep first row and delete 2nd,3rd,5th, 6,7,8 and then go to next unique identifier which would be AU0000LIFHB3 this would not be deleted as it is unique the would proceed to AU300GPTC011. this process would then stop when no data was available
AU300AUS1019
AU300AUS1019
AU300AUS1019
AU0000LIFHB3
AU300AUS1019
AU300AUS1019
AU300AUS1019
AU300AUS1019
AU300AUS1050
AU300GPTC011
AU300GPTC011
AU300GPTC011
AU300GPTC011
AU300INTE018
AU0000LIFHB3
0
AU300SUNQ027
complete this coding?
Sub DeleteBlankRowInColumnA()
'this macro scrolls down Column A if the cell is empty the row is deleted.
Dim A As Integer
A = 0
Do Until A = 142
If Range(0, "a1") = 0 Then
Selection.Delete shift:=xlUp
End If
Loop
End Sub
I have an Excel spreadsheet that is given to me weekly, but I'd like to remove repetitive and empty rows before presenting it to someone. It is set up like this:
Row 1, A1, contains the word Project.
Row 2 is blank
Row 3 is blank
Row 4 is blank
Row 5, A5, contains the word Organization.
Row 6 is blank
Row 7, A7, contains a 6-digit number starting with 3.
Row 8 is blank
(all of the above starts over again (loops) approximately 30 times)
The final row contains the phrase "Grand Total"
*Row 5 is repetitive and is not required. I'd like to delete it.
I have too many empty columns. Getting rid of them (and Row 5) would greatly shorten my spreadsheet.
I am aiming for:
Project
301111
Project
301112
Project
301110
(Repeat until finished)
Grand Total:
I have a worksheet with part numbers, and I want to delete all the rows with part numbers matching a part number in another workbook (I could import the list into the part number workbook in a new sheet if it makes it easier). The part numbers in the other worksheet would be in column A.
View 5 Replies View RelatedI would like to Use my Excel VBA program to search each row in a csv document for a name (located in a cell ) if the name exists then I would like to delete the entire row.
Whenever I try to do the above in excel, even when I save in csv format the file formating or something gets changed and the file which has to be procesed through another program then process incorectly.
Is there a way to do what I need while retaining the formating which must obviously be changed when the file is opened in excel?
Having book1 and book2 (that is closed). Is there a way that if I erase a value "X" in book 1, update book2 (without open it) deleting the complete row/rows where the value X is found?
View 4 Replies View RelatedI am sure this is a very simple questions. I am using the below code to work on the worksheets on a workbook called "MF BANK EXPOSURE SUMMARY.xls" so far the code that I am using is:
Sub Commandbutton2()
Dim iCol As Long
Dim Isheet As Long
Dim Item As Worksheet
Set MFBANK = Workbooks("MF BANK EXPOSURE SUMMARY.xls")
For Each Item In MFBANK.Worksheets
With Item. Range("A1:T65536")
For iCol = .Column + .Columns.Count - 1 To 1 Step -1
If IsEmpty(.Cells(65536, iCol)) And IsEmpty(.Cells(1, iCol)) Then
If .Cells(65536, iCol).End(xlUp).Row = 1 Then .Columns(iCol).Delete
End If
Next iCol
End With
Next Item
End Sub
I would like to extend the code so that it works on the worksheets of two workbooks at the same time the one being the "MF BANK EXPOSURE SUMMARY.xls" and the other being "MF CP EXPOSURE SUMMARY.xls" .
Using conditional formatting is it possible shade an entire row when a cell is = to 0. I am currently creating a spreadsheet for a small amount of inventory. I am manually editing the amount of product available.
What I want to happen is when I replace them number with the text ‘Sold Out’ I want then entire row to automatically grey that row out. Is it possible to make this happen using conditional formatting?
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I have some data in column A I want to delete the entire row if the cell hasn't the character @
View 5 Replies View RelatedHow would i search the entier worksheet im in, looking at column b only, and delete the entire row if i find the word Date in it.
View 9 Replies View Relatedwhen i delete the entirerow, it shifts the rows up (which is what I want) but it skips that row when it does.
so if I have 2 blank cells together it will delete the 1st and leave the 2nd blank.
Sub ()
Dim myrange As Range
Set myrange = ("a:a")
For Each c In myrange
If c.Value = "" Or c.Value <= 5 Then
c.EntireRow.Delete
End If
Next
End Sub
I written one code to delete Entirerow if value match. It's working fine .the code delete all match except one match.!
-------------------------------------------------
Option Compare Text
Sub delete_duplicate()
Cells(Rows.Count, 1).End(xlUp).Select
Range(ActiveCell, Range("A1")).Select
For Each cell In Selection
If cell.Value = "Already updated" Then
cell.EntireRow.Delete
End If
Next
End Sub
-----------------------------------
I'm having some problem with a part of my code that deletes entire columns. With ActiveCell as my reference, I want to delete 'Abs_Diff' Columns to the left hand side of the ActiveCell column, including the ActiveCell column. 'Abs_Diff' is a variable of integer type.
SO if ActiveCell column is "P" and 'Abs_Diff'=2, then delete Columns "O:P"
if ActiveCell column is "P" and 'Abs_Diff'=4, then delete Columns "M:P"
My code is selecting columns incorrectly, maybe due to merged cells in cols A,B,C or something..not sure.
Here is my code:
Code:
'DELETE COLUMNS
Set StartPoint = ActiveCell
For X = 1 To Abs_Diff
StartPoint.EntireColumn.Delete
Set StartPoint = ActiveCell.Offset(0, -1)
Next X
If column B contains the word FALSE, I need to delete that entire row, then I need to repeat this action on 11 sheets out of 14 on one workbook, in one action.
View 6 Replies View RelatedI use the code below to delete the entire row that has the Text "Pc." in it. How can I make this delete the row with "Pc." plus the next row?
Sub PL()
Dim i As Long
For i = Cells(Rows.Count, "A").End(xlUp).Row To 1 Step -1
If InStr(Cells(i, "A").Text, "Pc.") Then
Cells(i, "A").EntireRow.Delete
End If
Next i
End Sub
i have over around 1500 pfolios in Col A, i need macro that will delete entire row which has the highlighted pfolios. Now i tried advanced filter which would work but the date in Col A6 will change every month, so dont want to go down that road, is there alternative option other than advanced filter ..
View 9 Replies View Related