After running advanced filtering through VBA like that:
[Code] ........
Excel returns a couple of rows which fit the Criteria. How to display these rows in a textbox in the userform? (all I've managed to display in it is one cell).
I'm trying to compare 2 worksheets with the same headers(NAME, ADDRESS, CONTACT NO...). What codes should I use that when there is a duplicated row in worksheet A and worksheet B, it will be deleted and when there are 2 names with different addresses and/or contact no, the whole row in file A will be obtained. Output should also be in another worksheet. It goes like this.
worksheet A
NAME ADDRESS CONTACT NO
JOE ABC 123
MIL XYZ 567
NIK LMN 234
NED QRS 456
[Code]...
So the output should be:
worksheet C
NAME ADDRESS CONTACT NO
JOE ABC 123
MIL XYZ 567
NIK LMN 234
NED QRS 456
JIM JKL 345
SAM FGH 789
Is this possible in vba?
Basically every month I keep a track of my sales in a spreadsheet.
I've attached a sample file : Discrepancy Form.xlsx‎
Sometimes I don't get paid correctly. So rather then filling everything in manually, I want to simply put a "Y" (for yes, there's a discrepancy) or "N" (for no, there's no discrepancy" next to worksheet "Sales" but then have it display the values in worksheet "Discrepancy."
I want A1:A400 to display in B1.
View 6 Replies View RelatedI have a bit of code that fills textfields etc in a Userform. The data is being pulled from the spreadsheet but in this case the TIME is displayed weirdly.
It shows as 0,46875 and should show 11:15:00 as in the spreadsheet.
the line that reads this value is
Code:
.STime.Value = Cells(ActiveCell.Row, "V").Value
Is there any wayt to set the ControlSource of a textbox on a form to display the largest value within column A?
View 4 Replies View RelatedThe below code compares the Data in a Field that must be set and collect the duplicate Values in a second Worksheet.
The thing I want it to copy the rows, when a duplicate is found in Col A. editing the code below:
Original Sheet:
"A" "B" "C" "D"
Teil1A11000
Teil1B21001
[Code]....
I want to display the value of the next row or previous row when click Next/Previous button. For example when I click next, report number will be = 789, category = valid, issue = mobile, then reference = reference 3. What code to use?
Refer to the attached file for screenshots : Sample.xlsx‎
A particular textbox in myuserform requires a displayed format of 000.000. I would like the user to enter a no less, and no more, than 6 digits. On tab, the textbox displays that value in the preferred format.
eg. enter 123456, TAB, results in textbox display of 123.456
I have tried ...
Code:
[Private Sub freq_AfterUpdate()
freq = Format(freq, "000.000")
End Sub
But this results in 123456.000
i want textbox 108 to display the last entry from column A on worksheet MainSheet when textbox 6 is changed.
Private Sub TextBox6_Change()
Dim ws As Worksheet
Set ws = Worksheets("MainSheet")
Lr = Cells(Rows.Count, "A").End(xlUp).Row
UserForm1.TextBox108.Text = ws.Range("A2:A" & Lr).Value
End Sub
I have a spreadsheet with 2 columns, 'A' is the property number and street name, and 'B' is the year the work is going to be done on the property.
I have a form with a textbox and command buttons, now what I want to do is allow the users to enter property number and street in textbox1 and click commandbutton1 to search. If it finds a match I want a small message to come up and say either the year the work will be done (column B) or 'no match found'.
I have a cell containing a address. I have used alt-enter to separate lines of the address. I have a userform that contains a textbox which which loads the cell containing the address. The problem is once the useform is loaded the address in the textbox is all on the same line and contains a funny looking back the front P character where I have used alt-enter in the cell to make a new line. This ones got me knackered.
View 2 Replies View Relatedit is possible to populate a textbox (Userform_Initialize) with a predetermined range from a worksheet ("range" meaning " multiple cells"). I know you can set the ControlSource to populate the textbox using ONE CELL, but I don't know a way to do this with a range of data.
I've tried using the Value and Text properties, but no luck. I'm hoping to have the Userform Textbox populate automatically with a set of data when the Userform is opened. The data will always be 2 columns wide, but could be anywhere from 1 to 50 rows long. I've considered naming this dynamic range and then populate the textbox (somehow) with the named range. Can't figure it out and beginning to wonder if it is possible using VBA.
I have a userform for entering a sales invoice onto a spreadsheet, it obviously has a textbox each for the net value(textboxnet), gst tax(textboxgst) and total value(textboxtotal). How do I get the total amount textbox (textboxtotal) to automatically sum up as I enter the net (textboxnet) and gst (textboxgst) amounts?
View 4 Replies View RelatedI am confronting a problem with a ListBox that displays Item by the selection of a ComboBox in the same Userform.
All works like this in the column “A” from my data sheet I have a list of names and in the column J I have a list of years.
What my UserForm1 dose is to select the year column with the ComboBox and display in the ListBox the corresponding name from this year selection. Until there all work fine.
Now I have to display in the TextBoxes form the Userform2 all data form my (data sheet) and this dose not work properly.
What happens is that when I select and Item in my listBox.Userform1, Usrform2 kind of display Items from another person.
I will also attach an example on this thread for a better view of my problem.
When I enter a number, say 2456 in this textbox why does it display "$2.45" instead of "$2,456". I've tried fiddling with the ###'s and .'s but it just gets worse.
[Code] ....
I have two sheets. sheet2 is a lookup table. sheet1 is information sheet. i have created a userform where a user inputs data into 3 textboxes and clicks a button. i have the code for transferring the data from the textboxes into row after the last used row on sheet1, columns a,b,c. in columns d and e i have vlookup code that takes the value in column c and performs the lookup function to return values found in sheet2. this all works fine.
I am trying to display the vlookup results in a 4th textbox on my userform.
If I use this code:
[Code] ......
I receive a type mismatch error
if i use THIS code:
[Code] ..........
if works fine!?! what gives?
I am trying to display the results that i get in excel sheet in a userform using textboxes; I need to round off the digits in these textboxes so as to display 2 digits after decimal point! I would like to have the code to solve this problem!
View 4 Replies View RelatedVBACode for Calendar to display in Userform textboxWhat code so I use in order to have a userform1 calendar linked to a worksheet cell and then have the worksheet cell data displayed in another userform2 textbox?
View 2 Replies View RelatedI have a worksheet that I will enter in an age and gender ($B$5 and $B$6 respectively). Based upon these two criteria, I would like to display text in column H(Lower Limit) and I(Upper Limit), showing the norms for their health metrics, a few are below:
Metrics
Measured
Lower Limit
Upper Limit
Total Cholesterol
200
120
200
HDL
40
35
80
Glucose
90
90
130
So, as the user enters in the age in B5 and the Gender in B6 the VBA or formula would populate the cells with the appropriate data. I can get it to work with 1 condition using vlookup. Was thinking VBA might be useful there with the two criteria, just not sure how to code it.
I am new to VBA macros and trying to create display the searched items in the TEXT boxes for e.g
I have the data in one sheet as below.
Messgae CodeProgram NameError Description
asdsasdsqwewe
w987oiuhad2343
789ARU100Praveen Code
789ujiikluiooqwe
[Code]...
i have created one text box so that user enter the data to search by giving Message code. My concern is
From the example,
If the user enter 789 in the text box, and click on te search button( On user form) then it should dynamically create displays 2 occurance in each text box.i.e if the 789 found in 1 col then it should create 4 test boxesto display Program name data and 4 text boxes to display Error Description side by side. if not text boxes if will be if we display in lables also.
I want the users to store time only in some of the textboxes in a form so I have used control tip text for those textboxes. But i want to write vba code for displaying the error message if the users don't enter time in hh:mm:ss in those textboxes.
View 7 Replies View RelatedI want some code on how to fetch data from an Excel Database and display it on respective textbox.
Like I have these coloum name in excel sheet; Emp Id
Name
DOB
Dept
Reporting to
Transport req.
I want to have VBA code to fetch it on txtbx1, txybx2 and so on.
I have made a userform where I calculate how long time an operation takes. If the time fe.g. is 25 hours and 24 minutes then I get the result 1:24. I have attached my userform as it looks now. If you write 540 in the bar and 550 in volume and press "Beregn" then "Norm tid + 10%" will write 1:24 and not 25:24. Is it possible to have the Userform to write 25:24 or 1day and 1 hour and 24minutes?
View 2 Replies View RelatedI have a UserForm that Dead Head Miles will be entered into one text box. The Trip Miles will be entered into the second text box I would like for the user form to show the answer after the first entries are made something like this:
1)Dead Head Miles 20 +
2) Trip Miles 500
----times---$2.00
3)Projected Rate $1040 --show this after the DH and Trip is entered and Multiplied by $2.00
I have a sheet as shown in the picture below. If the cells in Column N has some values that are the result of some calculations. How ever if there are more than one of it, the entire row has to be deleted.
Eg:The value in Column N 816.323 has 3 rows below each other.Only one has to be there.There can be upto 10 values one after other in this way.
I tried to write a progrma by using loops and cehcking if ther is value in the cell,go to cell below and if there is value,delete the row in a loop of 10 times.But it didnt work
I've got spreadsheet I use to control the inventory of my user equipment; who has it, what is it, where is it, etc.
I'd like to "lock" multiple consecutive cells of each row so that they never seperate. This is because they need to be together. However, periodically, I need to move, sort, or rearrange the sheet.
Is there a way I can "idiot proof" this so that these cells never come unlocked from each other?
There is no vba involved (primarily because I don't know how), and no other scripting either.
I have a list of projects in several rows and at the column "K" is the status of the project, according to the status of the projects if the status is completed I want cut this entire rows and paste to another sheet calls Projects_Completed by using a macro
I've been tasked with developing a macro that will generate schedules. For background, we're taking a QuickBooks Customer file and exporting it to be picked up by the macro. I've got that part working, but now I need to delete various rows based on certain criteria.
The spreadsheet has a field for Job Status which we use to define whether an account is under contract (2 in QuickBooks), or some other status. Basically what I need to do is delete the entire row of data where JobStatus (Column R) is anything but 2.
I came across this code that selects (and extends) cells between the active cell and the next cell with data.
Is it possible to modify this so that it selects the entire Rows ?
Code:
Sub Test()
If Selection.Select "" Then
Range(Selection, Selection.End(xlDown)).Select
Range(Selection, Selection.End(xlToRight)).Select
Else
Range(Selection, Selection.End(xlToRight)).Select
End If
End Sub