Delete Rows Based On Criteria On Another Sheet?
Nov 21, 2012
few macros/vba that delete rows based on criteria in a cell.
I'm after something a little different. I have a workbook with sheets called Raw Data1, Raw Data2,Raw Data3, Raw Data4 and Raw Data5 and Menu.
There is a column of data in each of the sheets which has a column header of 'Location', however the column where this is located will vary from sheet to sheet. For example in Raw Data1, this is column 'J' and on Raw Data2 it will be column 'M', ( I'm not at work and can't remember the specific column positions for all sheets re: 'Location').
Is it possible to have on the 'Menu' sheet, say in cell B5 a value of 'Locationa' and have rows be deleted in each of the Raw Data that do not match the value in B5?
View 4 Replies
ADVERTISEMENT
May 4, 2009
I have some data from A1 to A65536, there are few blank rows in between. i want to delete all the rows below the word "test" in that range. that is the word "Test" appears in A37686 that row and all the below Rows till the last row should be deleted.
View 9 Replies
View Related
Sep 24, 2009
I have a sheet with say 1000+ rows that is a QA report of possible mistakes found in a employee rostering tool.
The report finds all occurrences where the staff member only has one coffee break rather than the two they are entitled to. However, on days where they have training, or other half day commitments, on of the coffee breaks is not entered into out tool. This means we are getting a whole lot of entries that we do not require(i.e. one coffee break error).
The tool uses icons but the cells do have a single unique character under each icon type. For example, the coffee break cells have a "T" and training cells have a "&" underneath the icon (without quotes). The staff members day is separated into 15 minute blocks and each block occupies a cell in a column. This means each staff members day spans many columns in a row (i.e. C=8am, D=8:15am, E=8:30am etc...).
What I have been trying to accomplish is to create a macro in VB code that will locate any row with both a "T and a "&" and delete it. This will eliminate occurrences that we are aware of and leave only genuine errors. There are other combination's that I would like to include also such as:
"T" "["
"T" "#"
"T" "@"
"T" "]"
The first row is headers and the first two columns contain team names and staff names which I am trying to exclude (because names contains "T"'s ).
I have spent many hours now looking for example code on Google, this forum and other forums, however most of the examples I have found are looking for two criteria within a column or specific criteria that is not suitable to my application (i.e. values <> certain numbers etc...).
View 8 Replies
View Related
Jan 23, 2010
I had a raw data sheet in which i need to prepare a statement just like the attached worksheet.
My requirement is to delete all those rows in the department column except the department which starts with "C" Just like "CNN" & "CNN-IN".
Rows with data containing the words starting with "CNN" should not be deleted .The rows can contain words with "CNN" or "CNN*"(here * denotes anything after the word CNN)
I had just formatted the whole worksheet for easy reference.Actually the raw data is extracted from other program which is very clumsy & irregular.
The department column might be in any column.
View 14 Replies
View Related
Nov 30, 2006
Is there a vba code that can delete the entire row based on two criterias? If a row has a location of Canada and is a female, then delete the entire row.
Name Location Gender
Alan Mexico Male
Dick USA Male
Sharon Canada Female <-- This will be deleted if based on criteria
Mike Canada Male
View 3 Replies
View Related
Jul 19, 2007
I am a pharmacist that runs reports and I need to sort and exclude data
It is in Excel 2003 format
I run a report that includes a patients name in one column, the medications name in another column and if the medication was withdrawn, wasted, returned or restocked in another column. Withdrawn, wasted, returned or restocked are treated as different functions and each have their own row entry. Patient and medication name are the same in all situations
I need a macro that will look at the patients name and medication name, see if it is the same and delete all rows that have a withdrawal with an associated wasted, returned or restocked.
View 9 Replies
View Related
Aug 24, 2009
I am trying to figure out how to have some VBA look down Column 1 and where the Cell's string value = "GRANDTOTAL", to DELETE that ROW and ALL ROWS below.
Can anyone help me out in writing the Visual Basic code?
View 8 Replies
View Related
Mar 5, 2008
This sheet has A:K columns and 1:3212 rows. There are 'page headers' that are in the text file that I want to delete (the text file was exported from an AS400 program). The first row that starts the page header has SA341 in column 1. Each page header has 5 rows. I used this code from one of the other threads on deleting rows, but I obviously do not understand the code as it deleted all rows that contained SA341.
Sub DeleteRows()
Column_To_Check = 1
Start_Row = 1
End_Row = ActiveSheet. Cells(Rows.Count, Column_To_Check).End(xlUp).Row
MsgBox End_Row
Search_String = "SA341"
For Row_Counter = End_Row To Start_Row Step -1
If ActiveSheet.Cells(Row_Counter, Column_To_Check).Value < SA341 > Search_String Then
ActiveSheet.Rows(Row_Counter).Delete
End If
Next Row_Counter
End Sub
View 9 Replies
View Related
Aug 13, 2012
I want to delete the rows if they do not equal "TL" based on certain criteria, but save the info
then delete the rows if they do not equal "Fedex" based on certain criteria, but save the info
then delete the rows if they do not equal "LTL" based on certain criteria
After the information has been filtered it is supposed to load to a template giving monthly information for each of the above, but this is not working
VB:
If Load = "LTL" Then
Range("A2").Select
Selection.Sort key1:=Range("F1"), order1:=xlDescending, Header:=xlYes
For x = 2 To TotalRows
If Cells(x, 6).Value > 10000 And Cells(x, 1).Value = "FEDX" Then
[Code] ....
I am pretty sure that my problem lies within the parenthesis where it says Rows("2:" & x-1).Delete. Am I supposed to put something else there since I am deleting rows based on three different loads?
View 6 Replies
View Related
Jul 10, 2014
A macro is required to identify rows within a selection e.g. entire column A, that share the same value, then delete appropriate rows depending on the values in another column. The attached example details the requirements.
Extract Rec1.xlsx
View 6 Replies
View Related
Apr 9, 2009
I need a macro to delete old data from a large selection of data, in order to keep the size down.
What I want this macro to do is
Check all rows from 5 downwards.
If A5 (date) is less than cell $B$1 AND B5 is not equal to C5 then delete the whole row.
Continue until reaching the bottom.
View 9 Replies
View Related
Feb 29, 2008
I have a Macro that I use daily on a spreadsheet I get with raw line-item transaction data on it. Basically, it deletes columns I don't need to look at, applies column headers, deletes certain rows that I don't need to look at, applies an auto-filter and filters to the first group of data I need to look at, and puts a subtotal on a couple of columns at the top so I can see totals on filtered results.
I need an additional function in this Macro. At some point in the middle of the actions above, I need to evaluate all rows and delete those that are 'opposites' based on a couple of criteria. Basically, I need to delete any transactions that have been refunded in their entirety, because for my purposes those are zeroed out and I don't want to see them....
View 4 Replies
View Related
Nov 29, 2011
I have a sheet of data. The data starts in row 4 and can be variable in length. I want to delete rows that do not meet a specific criteria, for example a location, Leeds, which is in column "i" of the table. I have written the below but it seems to delete data from row 1 rather than row 4 and repeat down each row
Code below
Sub deleterows()
Dim i As Integer
Dim intCounter As Integer
Dim strLocation() As String
p = Range(Cells(4, 6), Cells(4, 6).End(xlDown)).count
[Code] ..........
View 3 Replies
View Related
Feb 28, 2014
I am trying to adapt a macro which deletes all rows in Worksheet 1 where the date in column K differs from a date in Worksheet 2. The date in Worksheet 2 will change each day.
I think the macro below could be used, but don't understand how to replace the "Value = ":70:" with a reference to the master date in Worksheet 2.
Sub test() Dim lr As Long, i As Long lr = Range("A1").End(xlDown).Row
For i = lr To 1 Step -1 If Cells(lr, 1).Value = ":70:" Then
Cells(lr, 1).EntireRow.Delete End If lr = lr - 1 Next i End Sub
View 2 Replies
View Related
May 7, 2012
Each week I run a report that produces over 2,000 rows. I have to manually go through and delete things, by the time I am done, there may only be 320 rows left. I would apply a recorded macro, but the report is not consistent each week. There may be more or fewer rows depending on the week.
I would like to be able to run a macro that looks in column B for a specific value and if it contains that specific value, I would like the cells to the right of it to have their contents cleared.
Next, in column C, I have...
Employee2's Name
Employee2's Number
SPACE
[Code]....
I would like to be able to delete the rows, starting from Employee 2 to just before the second SUB TOTAL.
So, all I would have left in column C is
SUB TOTAL
SPACE
View 9 Replies
View Related
Apr 21, 2007
I have some VB code, courtesy of OzGrid and Davc4, that works well to delete duplicate rows based on criteria in Column A of the active worksheet (albeit a bit slow on large files).
How do I modify the code below to evaluate duplicate data in Columns A through D? .....
View 7 Replies
View Related
Jun 6, 2007
I'm trying to use VBA code to delete certain rows based on a couple of criteria as follows:
1) If column header is "TERMINAL NAME" and the cell value in that column is "BONDDESK", I need the entire row deleted.
2) Similiarly, if the column header is "PRODUCT TYPE" and the cell value in that column is "CORP", that entire row needs deleted as well.
The information is coming from another source, so the columns may change from day to day, i.e, "TERMINAL NAME" may be in Column L one day but in Column O another day.....
View 6 Replies
View Related
Dec 21, 2013
How can I extract rows from one sheet into another, based on certain criteria?
View 1 Replies
View Related
May 23, 2008
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5?
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
View 14 Replies
View Related
Jan 17, 2007
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
View 5 Replies
View Related
Apr 15, 2008
I have spent a few days searching through forums but cannot find examples that i have been able to successfully adapt ( because they are to complicated for my limited knowledge). I have a workbook with 5 sheets, sheet1 (current), and sheet 4 (archive) are the important ones. I need a macro to
A) copy rows from "current" to "archive" ( to the 1st empty row) if column S of "current" contains "Closed" ( the word is generated by formula).
B) The paste needs to paste special values and number formats ( want to lose formula but not conditional formatting).
C) data sort "archives" based on col A - this puts the newly archived data into correct sequence.Data sort lowest number 1st
D) delete the copied rows from "current".
e) give me a count of how many rows it deleted, (I have a macro to insert rows so will run that manually to recreate the correct number of emtpy rows (with formula and formatting) to bring the current sheet back to usual size.
I tried modifying a macro by RPaulson (based on cells on one sheet to cells on another), to work with entire rows but couldn't get it to work.
Found that paste special uses PasteSpecial xlPasteValues, but , and thats about it.
View 6 Replies
View Related
Aug 28, 2007
I have a worksheet in which I have sorted the data based in date and numbering (column I and E). I would like to create 2 macros for following actions:
1- all rows with the value "TOM" in column C will have to be deleted.
2- all rows with a value of 601 or 602 in column E, will have to be moved to the bottom of the sheet after the last row with data. The rows that have been moved will have to be sorted based in date (column I) and numbering (column E).
View 2 Replies
View Related
Jul 31, 2014
delete rows if two conditions are met .THe sample data looks as shown below:
I need to check for a given resource where the allocation hours are highest against which project , and then delete the rest of the rows for that resource records.If the Allocation hours are the same , then the priority column should be considered the highest priority should be included and the rest to be deleted.And if the priority is also the same then need just one record to remain rest of the rows to be deleted.I have priority of business area ranging from
Resource NameResource IDProject NameBusiness areapriorityAllocation hours
Lavanya 123243 MarketingSales 145
Lavanya 123243 Sales Sales 1150
Mukund 5678 Re engineeringRetail 210
Mukund 5678 StreamliningGeneric 990
Mukund 5678 documnentationDocumentation 850
View 5 Replies
View Related
Oct 3, 2013
I have rows like below in Column A. I wish to cycle till row 700 and delete rows where Right(A2(,1)="X") and also Rows where there is a blank Cell.
5
22X3
65
260X
70X5
8X66
873X
2206
059X
088X
90X8
2283
7606
View 6 Replies
View Related
Jul 20, 2009
I have the following table, which starts in Column A, row 2. I would like to have a macro, that deletes some rows after certain criteria.
If Column F = SO normal and
Column E = aa, bb, cc, dd, ee, ff then delete the whole row.
GeoRgn refSub Rgn refCountry Country 2GroupENNR3NxaaSO claim-inENNR3NxbbSO claim-inENNR3Nx222SO claim-inENNR3Nx222SO claim-inENNR3Nx222SO claim-inENNR3Nx222SO claim-inENNR3NxaaSO normalENNR3NxbbSO normalENNR3NxccSO normalENNR3NxddSO normalENNR3NxeeSO normalENNR3NxffSO normalENNR3Nx111SO normalENNR3Nx111SO normalENNR3Nx111SO normalENNR3Nx222SO normal
View 9 Replies
View Related
Dec 9, 2007
I have an excel 2007 file, which is quite big: ~10mb. There are situated plenty of columns with coordinates. I would like to transcribe it, modify those data, but it will take me ages. I'm not acquainted with macros, but I heard that people can do with them everything using computers' abilities. I'll abridge my whole problem.
I give you a sample of that file, so please open it. In the file you can see two 'columns'. Every column has two other columns called x and y. As you are thinking now these two columns are containing arguments (in x column) and their values (in column y). Every third column is empty. In attached file you see, that arguments are repeating and values are increasing by one. Sometimes there is an argument without repeats, and sometimes there are only two repeating arguments.
What I wanted to do is delete those repeating arguments leaving arguments with the highest and the lowest value. Example: Please look at range A230:B232. There are three repeating arguments and for this case I should delete row 231 from columns A&B and then move cells up to join separated columns. There are also not repeating arguments, which I need to double. If there will be only two repeating arguments I would like leave them. In the end I should have a clear view for all those coordinates.
View 8 Replies
View Related
Sep 8, 2009
i have several student ID results that have conditional formatting in place. I'd like to KEEP the following data but delete/hide everything else:
1) Filter out purple rows
2) WITH filtered rows: KEEP any scoreA that's 100% or less than 85%
3) Look at Score A and Score B - KEEP if the difference is greater/less than 5%
4) If a student took testB but didnt take testA, KEEP.
View 2 Replies
View Related
Dec 15, 2012
I am looking for a macro to delete rows that DO NOT contain criteria. But what I could achieve so far is deleting all rows except the first word ie ACC here. My code so far is as follows
[Code] ..........
View 12 Replies
View Related
Feb 2, 2009
I would like a macro that scrolls through each row and deletes it if it contains the word "Account" in column B.
View 5 Replies
View Related
Feb 14, 2009
I simply want to delete the last 10 rows containing date from a worksheet. No criteria other than they contain data anywhere in the row.
View 4 Replies
View Related
