Delete Rows But Save Info Based On Three Different Criteria
Aug 13, 2012
I want to delete the rows if they do not equal "TL" based on certain criteria, but save the info
then delete the rows if they do not equal "Fedex" based on certain criteria, but save the info
then delete the rows if they do not equal "LTL" based on certain criteria
After the information has been filtered it is supposed to load to a template giving monthly information for each of the above, but this is not working
If Load = "LTL" Then
Selection.Sort key1:=Range("F1"), order1:=xlDescending, Header:=xlYes
For x = 2 To TotalRows
If Cells(x, 6).Value > 10000 And Cells(x, 1).Value = "FEDX" Then
I am pretty sure that my problem lies within the parenthesis where it says Rows("2:" & x-1).Delete. Am I supposed to put something else there since I am deleting rows based on three different loads?
I have a sheet with say 1000+ rows that is a QA report of possible mistakes found in a employee rostering tool.
The report finds all occurrences where the staff member only has one coffee break rather than the two they are entitled to. However, on days where they have training, or other half day commitments, on of the coffee breaks is not entered into out tool. This means we are getting a whole lot of entries that we do not require(i.e. one coffee break error).
The tool uses icons but the cells do have a single unique character under each icon type. For example, the coffee break cells have a "T" and training cells have a "&" underneath the icon (without quotes). The staff members day is separated into 15 minute blocks and each block occupies a cell in a column. This means each staff members day spans many columns in a row (i.e. C=8am, D=8:15am, E=8:30am etc...).
What I have been trying to accomplish is to create a macro in VB code that will locate any row with both a "T and a "&" and delete it. This will eliminate occurrences that we are aware of and leave only genuine errors. There are other combination's that I would like to include also such as: "T" "[" "T" "#" "T" "@" "T" "]"
The first row is headers and the first two columns contain team names and staff names which I am trying to exclude (because names contains "T"'s ).
I have spent many hours now looking for example code on Google, this forum and other forums, however most of the examples I have found are looking for two criteria within a column or specific criteria that is not suitable to my application (i.e. values <> certain numbers etc...).
I am a pharmacist that runs reports and I need to sort and exclude data
It is in Excel 2003 format
I run a report that includes a patients name in one column, the medications name in another column and if the medication was withdrawn, wasted, returned or restocked in another column. Withdrawn, wasted, returned or restocked are treated as different functions and each have their own row entry. Patient and medication name are the same in all situations
I need a macro that will look at the patients name and medication name, see if it is the same and delete all rows that have a withdrawal with an associated wasted, returned or restocked.
few macros/vba that delete rows based on criteria in a cell.
I'm after something a little different. I have a workbook with sheets called Raw Data1, Raw Data2,Raw Data3, Raw Data4 and Raw Data5 and Menu.
There is a column of data in each of the sheets which has a column header of 'Location', however the column where this is located will vary from sheet to sheet. For example in Raw Data1, this is column 'J' and on Raw Data2 it will be column 'M', ( I'm not at work and can't remember the specific column positions for all sheets re: 'Location').
Is it possible to have on the 'Menu' sheet, say in cell B5 a value of 'Locationa' and have rows be deleted in each of the Raw Data that do not match the value in B5?
This sheet has A:K columns and 1:3212 rows. There are 'page headers' that are in the text file that I want to delete (the text file was exported from an AS400 program). The first row that starts the page header has SA341 in column 1. Each page header has 5 rows. I used this code from one of the other threads on deleting rows, but I obviously do not understand the code as it deleted all rows that contained SA341. Sub DeleteRows() Column_To_Check = 1 Start_Row = 1 End_Row = ActiveSheet. Cells(Rows.Count, Column_To_Check).End(xlUp).Row MsgBox End_Row Search_String = "SA341" For Row_Counter = End_Row To Start_Row Step -1 If ActiveSheet.Cells(Row_Counter, Column_To_Check).Value < SA341 > Search_String Then ActiveSheet.Rows(Row_Counter).Delete
A macro is required to identify rows within a selection e.g. entire column A, that share the same value, then delete appropriate rows depending on the values in another column. The attached example details the requirements.
I have a Macro that I use daily on a spreadsheet I get with raw line-item transaction data on it. Basically, it deletes columns I don't need to look at, applies column headers, deletes certain rows that I don't need to look at, applies an auto-filter and filters to the first group of data I need to look at, and puts a subtotal on a couple of columns at the top so I can see totals on filtered results.
I need an additional function in this Macro. At some point in the middle of the actions above, I need to evaluate all rows and delete those that are 'opposites' based on a couple of criteria. Basically, I need to delete any transactions that have been refunded in their entirety, because for my purposes those are zeroed out and I don't want to see them....
Each week I run a report that produces over 2,000 rows. I have to manually go through and delete things, by the time I am done, there may only be 320 rows left. I would apply a recorded macro, but the report is not consistent each week. There may be more or fewer rows depending on the week.
I would like to be able to run a macro that looks in column B for a specific value and if it contains that specific value, I would like the cells to the right of it to have their contents cleared.
Next, in column C, I have...
Employee2's Name Employee2's Number SPACE
I would like to be able to delete the rows, starting from Employee 2 to just before the second SUB TOTAL.
I have a column that has different SIC codes in it (00045, 00046, etc). I would like to set up a macro or filter that would take cells in this column and delete each row that contains a certain code that I don't want.
Example, I want to delete all the rows with SIC codes that have 00345, 00873, 00145, etc in a particular cell. I would like a macro that would look at each cell in the column and delete the rows that I don't want.
I have a workbook with a single worksheet that has about 2000 rows, columns A, B, C, D, E & F Cells in colums A, B, C, E & F all have very different information in them, nothing is similar in any of those columns that I can base a criteria on. Cells in column D however will have 1 of about 18 possibilities in them
What I want to do is have another workbook with 18 worksheets, each worksheet named 1 of the 18 possibilities, and somehow magically pull the data from the first workbook and insert it into the correct worksheet in the second workbook, leaving the data in the first workbook intact.
I update the first workbook several times a day, adding and deleting from it so would need to update as it goes, or be able to run the update as and when needed.
My skills are limited to simple formulas inserted into cells and dragging them down!
I'm using excel 2003. I would like to select and copy rows of data within a worksheet of a workbook and then paste those rows into a newly created excel workbook. That is the easy part. The complication is that I would like the macro to select the rows based on a particular string value that will be impossible to specify in a fixed way (i.e., it will change from project to project). Let's say the variable that distinguishes the rows is location, so some are from Tokyo, some New York, and some from Paris. Using vba, how can one 'splice' the data into (in this case, three) seperate workbooks based on the string/values of another variable?
I am familiar with auto-filter, but in this case, I really do need to create seperate workbooks, rather than apply calculations to a selection of the data.
I have a worksheet in which I have sorted the data based in date and numbering (column I and E). I would like to create 2 macros for following actions:
1- all rows with the value "TOM" in column C will have to be deleted.
2- all rows with a value of 601 or 602 in column E, will have to be moved to the bottom of the sheet after the last row with data. The rows that have been moved will have to be sorted based in date (column I) and numbering (column E).
delete rows if two conditions are met .THe sample data looks as shown below:
I need to check for a given resource where the allocation hours are highest against which project , and then delete the rest of the rows for that resource records.If the Allocation hours are the same , then the priority column should be considered the highest priority should be included and the rest to be deleted.And if the priority is also the same then need just one record to remain rest of the rows to be deleted.I have priority of business area ranging from
I have the following table, which starts in Column A, row 2. I would like to have a macro, that deletes some rows after certain criteria. If Column F = SO normal and Column E = aa, bb, cc, dd, ee, ff then delete the whole row.
I have an excel 2007 file, which is quite big: ~10mb. There are situated plenty of columns with coordinates. I would like to transcribe it, modify those data, but it will take me ages. I'm not acquainted with macros, but I heard that people can do with them everything using computers' abilities. I'll abridge my whole problem.
I give you a sample of that file, so please open it. In the file you can see two 'columns'. Every column has two other columns called x and y. As you are thinking now these two columns are containing arguments (in x column) and their values (in column y). Every third column is empty. In attached file you see, that arguments are repeating and values are increasing by one. Sometimes there is an argument without repeats, and sometimes there are only two repeating arguments.
What I wanted to do is delete those repeating arguments leaving arguments with the highest and the lowest value. Example: Please look at range A230:B232. There are three repeating arguments and for this case I should delete row 231 from columns A&B and then move cells up to join separated columns. There are also not repeating arguments, which I need to double. If there will be only two repeating arguments I would like leave them. In the end I should have a clear view for all those coordinates.
i have several student ID results that have conditional formatting in place. I'd like to KEEP the following data but delete/hide everything else:
1) Filter out purple rows 2) WITH filtered rows: KEEP any scoreA that's 100% or less than 85% 3) Look at Score A and Score B - KEEP if the difference is greater/less than 5% 4) If a student took testB but didnt take testA, KEEP.
I have some data from A1 to A65536, there are few blank rows in between. i want to delete all the rows below the word "test" in that range. that is the word "Test" appears in A37686 that row and all the below Rows till the last row should be deleted.