Copy Paste Multiple Criteria Based Rows To New Sheet
May 23, 2008
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5?
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
I have spent a few days searching through forums but cannot find examples that i have been able to successfully adapt ( because they are to complicated for my limited knowledge). I have a workbook with 5 sheets, sheet1 (current), and sheet 4 (archive) are the important ones. I need a macro to
A) copy rows from "current" to "archive" ( to the 1st empty row) if column S of "current" contains "Closed" ( the word is generated by formula).
B) The paste needs to paste special values and number formats ( want to lose formula but not conditional formatting).
C) data sort "archives" based on col A - this puts the newly archived data into correct sequence.Data sort lowest number 1st
D) delete the copied rows from "current".
e) give me a count of how many rows it deleted, (I have a macro to insert rows so will run that manually to recreate the correct number of emtpy rows (with formula and formatting) to bring the current sheet back to usual size.
I tried modifying a macro by RPaulson (based on cells on one sheet to cells on another), to work with entire rows but couldn't get it to work.
Found that paste special uses PasteSpecial xlPasteValues, but , and thats about it.
1) I have a original worhsheet_A which with header rows(1~6) and many columns. 2) In the sheet_A, there are 2 columns (ColumnN & S) which I need to set criteria (value>5). 3) If any row's data which meet the criteria (value >5) with either column N or S, copy all the entired rows to sheet_B following sheet_A sequence. 4) The sheet_B should have the same header row with sheet_A(row1~6).
Btw, is possible create a corn job trigger this macro to run daily 9am to send out the worksheet_B as email, so that the command button can be disregarded.
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014 28/1/2014 28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
I have a workbook with 4 sheets relating to areas and a summary sheet and introduction.
On the introduction sheet I have a dropdown which lists all the available products my company make.
What I want is to be able to select the product from the dropdown and then click a button which will then copy and paste the headers and any rows which relate to the selected product from each of the area sheets and paste it all onto the summary sheet.
I am trying to loop through a column and cut and copy cells containing one of ten or more criteria (text strings) to the next worksheet, which already exists.
The basic loop is set up, and I understand that an array for the multiple criteria is needed but am falling at this hurdle, as well as struggling with the routine to copy the row to the next available row on the next worksheet.
I have omitted to post my effort so far, as it's embarrassingly basic, but can anyone help with the code?
I am working on a project to automate the import of data and fixing the formatting.
The data contains the date in column A and time in column B. The time is in increments of 15 min for each day. The rest of the data is in columns C:F. Some of the dates don't have all of the times within the day (so instead of 96 rows of data per day, there maybe 80 rows). I have a second sheet of just dates and times that has the correct amount of rows for each day. What I need to do is have the rows data that matches in both the date and time column from sheet 1 copied over to the corresponding date and time on sheet 2. Blank data rows on sheet 2 are fine. I have found some stuff on .Find, but the stuff I found was for specific searches.
Sheet 1 7/27/13 12:00 AM 1 2 3 4 7/27/13 12:15 AM 5 6 7 8 7/27/13 01:00 AM 9 10 11 12
Sheet 2 7/27/13 12:00 AM 1 2 3 4 7/27/13 12:15 AM 5 6 7 8 7/27/13 12:30 AM 7/27/13 12:45 AM 7/27/13 01:00 AM 9 10 11 12
I have an example spreadsheet attached which contains 5 sheets. The 1st sheet ("raw data")contains the master data and the other sheets (which are blank at the minute) are the destination sheets.
I'm after a macro that will iterate throught the "raw data" sheet and when it finds the first cell in column B that starts with 'POPRS' it copies and pastes this and the remainder of the row (through to 'H') into the new sheet 'POPRS' and continue to do this for all instances where column B cells start with 'POPRS'. Likewise with the rest of the Grades in this 'Raw Data' sheet.ie Instances of PORAW,PORTP,POPRS etc. Column 'A' must be pasted also
I have a dictionary for which’s words I want to find poem verse pairs as references. I want to add 3 different verse pairs of poems as reference to each word from my wordlist. There are two worksheets: .......
I am very new to Macro programming. I want to set up a macro which will copy data from few cells in a sheet and paste them as "Values" to certain specific locations in another sheet based on criteria. This copy paste needs to be done for about 40 different cells. I want to fix this with a button on the source sheet, so that this process happens when the button is clicked. I am attaching a sample file showing what I need.
I have a macro that would check data in Column A and validate if a particular number is repeating, then for that number go to column B, Take the Values from there go to a new sheet and paste the values in a row.
1. Copy data from original file (I do not want to do anything in the original file) into the spreadsheet (Target worksheet)where the code should run. 2. In sheet 1 of Target Worksheet, there are 2 columns which I need to set criterias on namely Column D and Column L 3. In Column D, I want to specify 3 criterias namely A, B and C 4. In Column L, I want to specify 5 criterias namely London, Frankfurt, New York, Sydney and Tokyo 5. If Criterias in 3 and 4 are met, copy all rows into Sheet 2 of Target Worksheet
I am pulling from odbc into an excel sheet Thier is one column with our Sales Order Numbers.
I would like to have a search box or box pop up asking a user to enter the Sales order number they need. Once they do that it will search thru the list and copy the rows with that Sales Order Number, then paste them to another sheet.
I need help on setting the searching part up and selecting the range to copy....I think I can take it from thier after that.
Basically on the file below whenever there is data in column "type" I want excel to copy the "name" and "account" next to it. The whole file has about 80,000 rows. Spacing is not always one blank row between accounts. I am using excel 2007.
I have tried to write some VBA to copy and paste rows based on the condition in cells A:A in sheet one. So far I have managed to put something together which will paste the first row and insert a new row below but keeps on pasting the same row. But not much else! Not sure I have tried to make it more difficult than what is it.
I would like it to copy a row based on a certain condition ("WRW") in A:A sheet one and paste it to sheet2.
VB: Function DoOne(RowIndex As Integer) As Boolean Dim Key Dim Target
Thank you all so much for this wonderful forum. Today has been a day of going through post after post. I am usually able to solve my problems through reading similar issues. However, just can quite get this one and I think it is rather simple, but frustrating none the less.
Attached is a spreadsheet with a list names in column B. The codes I have tried to write or have copied find one name and paste it to sheet 1. However, I need to find several names and then copy each row to sheet 1.
I've two sheets: "present" and "removed". I would like to have a whole row copied and deleted and existing rows moved up in "present" when I type the word "yes" in column E. The deleted rows are to be pasted into "removed", with two extra pieces of data - date removed and name of person removing it - to be asked in pop up boxes and inserted into col F and G respectively in "removed".
I have multiple .xls sheets in a folder. C:Documents and Settingsu369875DesktopProject stuffTestin Save_ASCompleted History. And need to copy the data in all of them and paste them into a new sheet (one main sheet) in this folder...........