Copy Multiple Rows From One Book To Another Based On Info In Cell D
Aug 19, 2009
I have a workbook with a single worksheet that has about 2000 rows, columns A, B, C, D, E & F
Cells in colums A, B, C, E & F all have very different information in them, nothing is similar in any of those columns that I can base a criteria on. Cells in column D however will have 1 of about 18 possibilities in them
What I want to do is have another workbook with 18 worksheets, each worksheet named 1 of the 18 possibilities, and somehow magically pull the data from the first workbook and insert it into the correct worksheet in the second workbook, leaving the data in the first workbook intact.
I update the first workbook several times a day, adding and deleting from it so would need to update as it goes, or be able to run the update as and when needed.
My skills are limited to simple formulas inserted into cells and dragging them down!
I'm trying to copy rows from one workbook that is exported from access to multiple worksheets in multiple workbooks. I used a macro I found here from JBeaucaire that will copy the data for me but it over writes the information I have in rows 1-3 and also the rows below, 28-35.
Is there a way to copy the data without loosing the information in the first three rows and the rows below where the data goes?
I have eight sheets that have lists of questions in, which I want to copy across to a results sheet if the answer to a question is 'Yes'. Each question takes up rows B:H inclusive, and I would want to copy them to rows B:H in the results sheet. The "Yes" value will be found in column F of each row.
How can I set up a macro to copy the entire rows (without formatting) into a results sheet properly? I've tried every solution I can find but always hit a roadblock somewhere.
Ideally I would like to have a 'populate' button on the results sheet that would find every question that was answered 'yes' across the eight survey sheets and import them into results sheet.
My company has an excel file that has our new customer's information (colum A & B are first & last name;Column C is customer email; Colum D is cutomer phone, ect...)
once that information has been entered we have another excel file that will load all of a customer's information, and then be pasted into a welcome letter into MS Word for their confirmation & emailed to them
The problem I'm running into, Is that I do not know how to populate my nex excel sheet with the info I want only from a specific line.
I would like to enter a line / row number (for example '6') and than have excel go to that file & copy/paste the name, phone, email, company name, ect. into my new excel sheet
I have one that works already, but the previous owner PW protected it & hid his formulas/macros, so I'm in a dead end now...
I have an invoicing spreadsheet, what I want is to have a main working page and then tabs after separated by vendor, but save myself a bunch of manual work in the future.
I want to be able to work in the main tab and the other tabs automatically update with the new info.
So I want the macro to search the text in the first column and if it finds "AIM Land Services Ltd." then I want it to populate the appropriate tab, in this case "AIM", with all the respective information after it ie: A-O. But I dont want it to select any other vendors/ info.
This is what I have:
Sub MoveData() For Each cell In Range("A1:A1") ' Where to look for the date If cell.Value = "AIM Land Services Ltd." Then ' The date Range("A5:O350").Select ' What is the range to copy Selection.Copy ' Copy it Sheets("Invoice_Log").Select ' Select the Sheet it applies to Range("A5").Select ' Where to paste the data
At job, Mac OSX and Address Book 4.0.6 with contact info including in many cases emails. I'd like to get it of there, into Excel to manipulate, and ultimately into a FileWrecker Pro database. How to export 1087 entries from Address Book including only selective data fields is the question, and I know that's "slightly" OT, but I do want to import into Excel, so I hope that vindicates me! If not, and you can point me to a good MacForum, I'll settle.
I am trying to loop through a column and cut and copy cells containing one of ten or more criteria (text strings) to the next worksheet, which already exists.
The basic loop is set up, and I understand that an array for the multiple criteria is needed but am falling at this hurdle, as well as struggling with the routine to copy the row to the next available row on the next worksheet.
I have omitted to post my effort so far, as it's embarrassingly basic, but can anyone help with the code?
I have a column that has different SIC codes in it (00045, 00046, etc). I would like to set up a macro or filter that would take cells in this column and delete each row that contains a certain code that I don't want.
Example, I want to delete all the rows with SIC codes that have 00345, 00873, 00145, etc in a particular cell. I would like a macro that would look at each cell in the column and delete the rows that I don't want.
I want to delete the rows if they do not equal "TL" based on certain criteria, but save the info then delete the rows if they do not equal "Fedex" based on certain criteria, but save the info then delete the rows if they do not equal "LTL" based on certain criteria
After the information has been filtered it is supposed to load to a template giving monthly information for each of the above, but this is not working
VB: If Load = "LTL" Then Range("A2").Select Selection.Sort key1:=Range("F1"), order1:=xlDescending, Header:=xlYes For x = 2 To TotalRows If Cells(x, 6).Value > 10000 And Cells(x, 1).Value = "FEDX" Then
[Code] ....
I am pretty sure that my problem lies within the parenthesis where it says Rows("2:" & x-1).Delete. Am I supposed to put something else there since I am deleting rows based on three different loads?
I am trying to get a list which counts info based on multiple conditions but I can find no way round this one point
I have a sheet which has all the games played in a particular division and the time that each goal was scored and I am trying to break down the following
What I want is a list that has a column that has the result of how many times when team A were playing at home was a goal scored between the 45th and 65th minute
column A = Home Team B=Away Team C= Time of First goal D=Time of Second goal E=Time of Third etc
I have a countifs in place for counting the home team and counting if the first goal was scored in under 10 minutes (this is simple as obviously all the first goals are in column C) but what I want to do is be able to have a count of how many times a goal was scored between x number of minutes eg between 40-50.
My problem comes when trying to count the goal times as some matches will have no goals and the cells will be blank and others will have multiple cells filled and the figure I want could be in any column and I also only want it to count only the amount of games a goal was scored between those times so if a game had 3 goals scored in between that time I only want it to count 1.
The sheet has a lot more columns but this is the main sticking point.
I have multiple sheets with the same format.(all columns have same format) in column "A" i have a value lets say "B1-1".
What I need to do is to copy from all sheets the rows containing in column "A" the same criteria("B1-1") to a new sheet and skip the rows that have a blank cell in Column "A".
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5?
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
I'm using excel 2003. I would like to select and copy rows of data within a worksheet of a workbook and then paste those rows into a newly created excel workbook. That is the easy part. The complication is that I would like the macro to select the rows based on a particular string value that will be impossible to specify in a fixed way (i.e., it will change from project to project). Let's say the variable that distinguishes the rows is location, so some are from Tokyo, some New York, and some from Paris. Using vba, how can one 'splice' the data into (in this case, three) seperate workbooks based on the string/values of another variable?
I am familiar with auto-filter, but in this case, I really do need to create seperate workbooks, rather than apply calculations to a selection of the data.
Problem-1) i want to round off the digit in the same cell i,e. Formula in F12 should be included in D12.
Problem-2) i have entered a sample account.in this i want to post the data entered in day book into their respective sheets of jaya and supervision automatically.
I would like to know if there is a way to copy a spreadsheet and paste it into a new tab on another spreadsheet. We currently download 2 lots of spreadsheets from SAP and would like to create another spreadsheet to act as a 'central' preadsheet. What I would like to happen is that the data from the 2 downloaded spreadsheets will be automatically pasted into 2 new tabs on the central spreadsheet, then run some formatting macros (which I can do fine).
WS "Activities" has a list of dates in col B (Inputted as 02/01/2012, 04/01/2012, 01/02/2012 etc.) (Formated as 02-Jan-2012, 01-Feb-2012 etc.)
WS "MonthReport" is where the rows are being pasted Currently the code will paste rows based on the search string in MonthReport("B1") So - If I type 02/01/2012 in B1 it copies all the rows where that is the date.
What I need it to do is be able to search for "January" and then return all the rows where the date is between 01/01/2012 and 31/01/2012. (Or all of Feb, Mar etc dependant on what is in MonthReport("B1")
Private Sub CommandButton1_Click() Dim LSearchRow As Long Dim LCopyToRow As Long
I have a list of items with a quantity in the final column. I need the rows to be copied the same number of times as the quantity displayed so that instead of having 1 row with a quantity of 5, it copies this row a further 4 times so that there are 5 rows. how this can be achieved other than manually as is currently the case? I've attached an extract so that you can see what I am working with. Column H holds the quantity (obviously) and ideally should be reset to 1 when the item is copied the relevant number of times.
I am making a workbook for our 4H horse shows. I want to be able to list the kids on the first page and check off (x in the cell) which classes they will be entering and then have the program move their info to each of the specific class worksheets where we will record the results. I'd like to move rows A thru E to each applicable class sheet. I've attached the workbook.
For Column A-I would like to create a macro that will copy the info from cell A1 and paste in in A2. This will continue all the way to the last row containing info which will vary. So after the first copy/paste, it well go to A3 and copy paste onto A4, A5 will copy and paste onto A6 etc.
For Column B- The same only it will copy the contents of B2 and paste it on B1, B4 copy/paste to B3 all the way until the last row of data.
I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
a macro button on my excel sheet that should do the following.
i have a range (Ex: E3:E46) which is being continuously filled, i need to transfer the information to another sheet depending on column "E", (Ex: if "E3" = "A" paste row to sheet2 if = "B" paste row to sheet3) and so on each row could have another string in column "E".
after the paste is done it should clear the range making place for new entries, that should also be copied finding the next empty cell (it shouldn't delete the old entries)
I have a worksheet that contains 15 instances of a repeated table over 700 rows. Each table is 45 rows in size and is housed in between the natural page breaks in the spreadsheet.
These tables are populated from data form another worksheet but may not all be used (8 out of the 15 may be used but will always start from table 1 and there will be no missed tables).
In the very top right of the table is a cell value that is only displayed if the table is in use, so will be blank if not used.
Code that will hide multiple rows (45) based on a cell value being blank.
I have some VB code, courtesy of OzGrid and Davc4, that works well to delete duplicate rows based on criteria in Column A of the active worksheet (albeit a bit slow on large files).
How do I modify the code below to evaluate duplicate data in Columns A through D? .....
Currently I have it setup to copy rows to a sheet "Report" based on a single cell value. But now I need the same thing but have it copy the rows based on 2 cells values to sheet "Report". So for example I wanted to copy and paste each row in my workbook that contain values in Columns N:N that contain the value "Test" and in columns AB:AB that contain "1".
Sub copyagain() Application.ScreenUpdating = False Dim sh As Worksheet, findThis As String, fAdr As String, fLoc As Range findThis = "1"
