Deleting Rows From Sheet 1 When Table On Sheet 2 Does Not Have Data Anymore
Jul 3, 2014
Currently, Im running a button macro. When this button is clicked, the table from "315 Employee Data" will copy the names from column C to "315" sheet B12 onwards.
Now, what i want is when I update the employee data on "315 employee data" sheet, I want "315" sheet to automatically match the names from "315 employee data", delete and add names when I add or remove employees from the column the next time i click on that button again.
After the above is achieved, when i add new employees,run the macro and it displays the updated list of names, I want "315" sheet column A to do automatic numbering.
I have attached the file for your reference.samplesample.xlsm
what I need, but can't seem to string anything together for the final product. What I want to do is search one sheet, in column BQ, for the word Complete. If a cell has that word in it, I want to copy that row, paste it into another sheet, and than go back and delete that row, and continue the search until all rows have been searched. Is there a simple way to do this?
I was thinking of an auto filter, but I'm not sure it'd work how I want it based off of what I've read.
I have 5 pivot tables on 5sheets, all looking at the same source data in sheet 6
On the source data there is a filter on the headers, if you change the filter, is it possible for all 5 pivot tables to update according to the filter?
My starting point is the below, but there probably is a better way but i would want the sourcedata to equal visible rows on the source data sheet headers run A:K and up to row 10000 .
I want to establish a link from my worksheets. Using the conventional link method I was able to link the values from my first worksheet to the second worksheet. My problem is when I delete a particular row. The reference of the second worksheet will have an error #REF! since I deleted those cells. Is there any way that I can link my two worksheets without any error that even if I deleted a particular cell/row the reference is still intact?
The code below works nicely to insert a time stamp in column B when the user selects "Yes" in the corresponding cell in column A. The problem is if I try to delete any rows or clear the contents of the cells I receive a "Run-time Error 13 - Type mismatch." If I delete the contents of the cells one at a time I do not receive the error. What I am trying to do is the user has a list of items to select from in column A. Only if "Yes" is selected I want the time stamp in column B to appear.
Code is below.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
With Target If .Value "Yes" Then Exit Sub
If Not Intersect(Range("A1:A50"), .Cells) Is Nothing Then Application.EnableEvents = False With .Offset(0, 1)
I have a couple of spreadsheets that requires me to copy data from Sheet 1 that matches certain criteria to Sheet 2.
I have tried using posted VB codes that have been written for other people but they dont seem to work (this is probably to do with me not actually knowing what I am doing, as I am not sure what I should be replacing and what I need to be deleting etc out of the pre-written code )
I need to be able to search on column e in Sheet 1 for anything that has just h written in the cell and then copy all the rows that match into Sheet 2. I also would like to ensure that when it is copied it doesnt go in row 2 but maybe 4 or 5 as I have quite allot of headings.
I have a workbook, "Assessment District" with 3 worksheets. In worksheet "Original," I have 252 rows with columns A-V. I want to copy two coloumns "C" (range 6-252) and "N" (range 6-252) from the worksheet, "Original" into a new worksheet titled "Send" in columns A & B. I only want to copy the two columns "C" and "N" for each row, if column Q does not contain "beach town" or "freeway."
For example, row 6 contains beach town, so I wouldn't copy C6 and N6 onto "Send," but row 100 doesn't contain beach town or freeway, so I would copy C100 and N100 into "Send."
This is a workbook that would be updated annually.
I'm not skilled in VBA at all, but want to impress my supervisor where I'm interning.
I want to be able to paste the large amount of data I get each day into the first sheet in my workbook ("data dump" sheet), the data will be formatted in the way i have used in the example workbook.
I then would like to be able to just have to enter 2 values into columns A and B of "1st output" sheet (Label in A, and Item in B), then have it look up the data that corresponds to those 2 values that are both in the same row in the "data dump" sheet, and have it copy and paste all of the relevant data in that row into the row in the "1st output" sheet.
The data I would want excel to find and place for me in the first sheet is highlighted in yellow
As a way of keeping track of this every day, I then need the data from the "1st output" sheet, to be fed into the "2nd output" sheet. This sheet would have all of the peoples' names already in it, but would just need to look in the "1st output" sheet for references to these names. If one of the names pops up, I'd need the date shown in the row of that instance to be placed after their name. This will allow me to keep a log of how many times their name gets flagged up, as well as the dates on which it happens. Again, the data I'd need excel to look up in the "2nd output" sheet is highlighted in yellow.
If there was a way of having the 2nd sheet add new names it finds on the 1st output sheet, that aren't already referenced on the 2nd output sheet in column A, that would be amazingly handy if it could then enter that name into column A and start a new row for them
I've been working on a macro that makes copies of a template sheet based on a table in my Opps sheet. If column B isn't empty, make a copy of the template sheet, rename it to Opps column A, and then hyperlink column A's current A.row to the newly copied and renamed sheet.
I'm not sure what is wrong exactly, it keeps making duplicate Template(x) and stops renaming them, and the hyperlinks are not working. -This is my first go at VBA hyperlinks to internal workbook sheets
I am currently dealing with an excel sheet that I am using to track people that I have contacted over the phone.
I created a drop down box for a column titled "Contacted". Under this drop down I have included: "Yes" - I reached them; "YES/CB" - I reached them, but need to call back; "NO/LVM" - I did not reach them, but I left a voicemail; and "NO/NVM" - I did not reach them and I was unable to leave a voicemail.
My goal is to have several Sheets in this 1 workbook.
Question: How do I get the WHOLE row of data to transferred to a new sheet(s) depending on the selection I make, i.e. "Yes/CB" or "NO/NVM" ??? Make note: I would like the data to disappear from the original sheet when it is transferred to its new home.
What I have is a sheet that is copied periodically from some source sheet, and on this sheet is a table. This sheet is called "Onsite Checklist Template" and it's table is titled "Checklist". I also have another sheet called "Loggers and Initial Notes" which has a tabled titled "Record", and then finally a title sheet call "Proj Details".
To clear this intro up - The sheets, in their order, is: "Proj Details", "Loggers and Initial Notes", "Onsite Checklist Template". The tables: "Record" on "Loggers..." and "Checklist" on "Onsite..."
When the user wants to make a new site visit, he/she fills in the requested date and then selects a button on "Proj...". When this button is selected, it copies the table data on "Record" and puts it on "Checklist", then inserts a new worksheet tab, always in the 3rd position (the title is based on the site visit date in which the user entered), which is a copy of "Onsite...". Now we have another sheet with a table called "Checklist1", and upon another new site visit, there will be another worksheet with "Checklist2", and so on.
On the "Onsite..." worksheet, there is a button on it which also gets copied with the worksheet so that every new worksheet has this copied "Checklist ???" and this button. I'm looking for a macro that, when the button is selected, will bounce the active sheet's table "Checklist ???" off of "Record" and make changes as needed.
"Checklist ???" data range is B11:M20 (the header is on row 10); "Record" data range is B29:Q78 (the header is on row 28); Column headers are titled the same, just that "Record" has 4 extra columns, 3 in the middle and 1 on the end. "Checklist ???" columns 1-12 to "Record" columns 1-7, 10-12, 14-15. The search criteria is the 4th column in both tables ("Trk #").
I need the macro to do the following:If it finds a match, then update "Record" as needed with data from "Checklist ???", changing whatever cell is different in the row that contains the matching "Trk #", so long as the cell on "Checklist ???" is populated (i.e, if a cell on the target row of "Record" has a value, but it's blank on "Checklist ???", then "Record" wins; if it's blank on "Record", but populated on "Checklist ???", the Checklist wins. If both populated but different, then Checklist wins.If a "Trk #" exists on "Checklist ???" but is not on "Record" then add the line to "Record" (the 1st empty row, table size remains)I see no need for any "delete" at this time.
My concerns: The last column on record (column #16) is the filtering column for the worksheet copy event and needs to be left alone (it's formulated to produce a "Yes" or "No")I would like the ability to adjust table sizes if needed without modifying the macroThe table rows on "Checklist ???" will not be changed, deleted, or altered in any way by the macro.
I have a workbook with a sheet per day, each sheet has a variety of 'jobs' as columns and a variety of people and kit as rows. Hours are manually input each day during the month.
Simplified version... These are two separate sheets 'M060114' and 'Tu070114'.
Monday Dig Drive
Dave 4 5
Bill 2 7
Tuesday Dig Drive
Dave 2 7
Bill 8 1
I have a Pivot Table on a separate sheet. This was created using the Wizard (ALT +D +P).
Dig Drive
Dave 6 12
Bill 10 8
So far, lovely.
But when I double-click on a number or right-click and choose 'Show Details' I don't get the sheet names in the newly created information sheet. I get the Row label, column label and a list of the entries.
So if I clicked on 10 above...
Row Column Value
Bill Dig 2
Bill Dig 8
That's fine with just a couple of entries but with about 80 columns and 250 rows spread across a month, therefore 30ish sheets, it's difficult marrying up the 'Show Details' sheet to the actual data.
So after all that, the question. Is there a way of getting the sheet name to appear in the 'Show Details' information sheet?
I have I workbook that contains 2 sheets. The first sheet "Business Objects" is the master list. The second sheet "Gene" contains similar data but is incomplete. There is a unique identifer for both sheets and that is item ID. what I would like to do is look at the Item ID column on sheet1 compare it to SS# on sheet two and copy any rows from sheet1 to the end of the sheet in sheet 2. I have found in my searches on this forum a bit of code that identifies the ones in sheet1 that are not in Sheet2 and highlights them red(which is not neccessary for me, but I am struggling to figure out how to take that and paste it to sheet2.
Is there anyway to run this where the 120 is inserted dynamically. I tried the following but it does not work. Test Delete Row is a named range. It does insert the correct row number, but still does not execute
Dim DelRow As String DelRow = [TestDeleteRow] [DeleteTest].Select Selection.ListObject.ListRows(DelRow).Delete
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
I have a workbook where Sheet A is a Master Order Form. Employees will input the quantities they need in Column C. The sheet will be otherwise protected. Sheet B is a "printable" order form that only contains the rows from Sheet A where the Quantity on Sheet A is not blank and is >=1. This will allow me to print sheet B with no blank rows for the items I don't need.
I found the following formula which claims to be able to do what I want:
I have some data which is copied from our system in the format below, I then need to add only parts of this information to an existing spreadsheet on the network.
This is the information (there could be lots of these entries, but all need to be added to the spreadsheet)
Device ooo.1111111111111111111111555666663333 performance has deteriorated.
increased from average value of 2041 days to 44589 days. warning 2/6/2014 2:38:18 AM aaa-ab-cde00.efghijklmno.ddd.kk
Device ooo.11111111111111111111115556666633356kk performance has deteriorated. increased from average value of 2041 days to 44589 days. warning 2/6/2014 2:38:18 AM *aaa-ab-cde00.efghijklmno.ddd.kk*
I then need part of the above data to be transferred to in Excel in the following column headers (see attachment for layout)
DateTimeHostDeviceLow ValueHigh Value
what is the quickest and easiest way of updating this spreadsheet..... I have to update the spreadsheet every morning and it is very time consuming .
Clients come to the shop and can ask to receive body massage, foot massage or herbs massage for 1 hour, 2 hours or more. Prices vary depending on the number of hours requested by client and option (body massage, foot massage or herbs massage). For example, one hour is more expensive than if they get two hours at once.
At the moment, our secretary has to keep records of who's massaging, what option and number of hours. From that she has to calculate how much each employee must get at the end of the day. Hence, I want to create a document to automate all this by letting her select from drop down menus the name of employee, time massage started, number of hours and the option (body massage, foot massage or herbs massage). It contains two sheets:
SHEET 1: management: see atached image: management.jpg SHEET 2: rates: see atached image: rates.jpg (prices are not real).
In SHEET 1: Management TOTAL in column H is what we charge customer. TOTAL EMPLOYEE in column I is what must be paid to the employee after each massage. TOTAL in column A and B is total price at the end of the day.
In SHEET 2: rates There's 3 options: body massage, Foot massage, Herbs massage. For each options, there are two columns: first column is the price for client and second column is price to pay for employee.......
I have all games saved, each game into it's own sheet (tab), in a workbook. Game 1 is on Sheet1, game 2 is on Sheet2 etc etc
I also have a "Calculations" sheet that I wish to import each game into 1 at a time, and run a macro on it to run a stat tracker.
Is it possible to create a table, that I can type the sheet name "Sheet1" into a cell, it will have that table populate with all the info contained in "Sheet1"?
I have a table with names in column 1 and the date as row 1. The corresponding cells contain the data I want to link to in another sheet and display them by the data/date
Ex,
Name 01-Sep02-Sep03-Sep
bob A1 A1 "blank" joe A2 "blank" A2 steve A3 A3 A3
I want it to display in another sheet with column 1 data and row 1 as date if the data has a match versus that date;
I need to populate data from Access table to sheet1 using Excel/vba. I want to find out the percentage of batches scanned for the date selected for each time slot. There are Time slots in the columns from Q to X. i.e 8:00,9:00,10:00,11:00.....etc.
so I need to find out percentage of batches scanned before the above time slots.. To count total number of batches , we will use count(BatchNo) function in the SQL query. Because of company restrictions, I can't attach the access database but to give u an idea how the database is stored, I copied the data in sheet2 of the attached workbook. We have to find percentage of batches scanned in sheet1.
Is there a way to create a data table where the input cell is not on the same sheet as the table? I've tried using a named range, and can't make that work.
I usually work around the problem by putting my data tables on my assumptions sheet, or creating a new input cell on the data table sheet, and linking the original input cell to it,
I have a sheet in which you enter in new information. I need a macro to copy that information onto another sheet, onto the first empty row, so it does not clear the information that has already been entered. The first sheet is an information entry sheet, and the second is the database, which contains all of the information. I hope this is clear, if you do not understand, I will be happy to rephrase my question!
I have included two screenshots of the excel system. They are named.
I'm going to try to explain this as accurately as possible. This is my first post, and I'm seriously struggling with VBA, but i'm confident that someone out ther will have done this before.
I have a single workbook which has a single datasheet, and further sheets representing different months of the year.
Sheet 1 ("Data") contains the following columns and data:
DateStart MileageEnd MileageBusiness TripBusiness Mileage 01/05/2008013 get 13 02/05/200813260 03/05/200826100 euro 74 04/05/2008100113 adf 13 05/05/20081131130 06/05/20081131130 07/05/20081131238 alex begg1125 08/05/2008123812510 09/05/200812511288 service 37 10/05/2008128812980 11/05/2008129813110 12/05/2008131113780 13/05/2008137814000 14/05/2008140014560 15/05/200814561490.10
I then have a series of Summary sheets which are supposed to summarise the data on this single data sheetl. But this is where I have issues.
Basically, from the list of data above (running from 1st may 2008 - 31st December 2008), I want to pull out, per month all of the trips in that month. So for May (shown above) I need the date, business trip name, and the business mileage where the business trip name <> "".
To compound the issue, the columns that these are moving into are columns 1, 2 and 6 in the summary spreadsheet.
I have used some example code from cpearsons website to give me a list of nonblank cells in the Business Trip column, and this has worked, but I can't pull the other two columns out effectively.
i have a workbook that has a lot of sheets but i need to pull information from the one sheet "Veneer Log" i Need it to make new sheets with the same heading as on the "Veneer Log" (Rows 1 & 2) Sheet but it needs to be filtered by the "Product" Column (H) with a new sheet made for all the diffrent products i.e. Dimensional, Drywall, Corners - Thin V., Accents,..... so each product will have a new sheet with i am hoping someone can help me with this. This log changes Daily and it would be nice to have a sheet with only the same product on it to compare new orders so we can batch run. i hope i have given you enough information so someone can help me with this. i have attached a sample log the real log has about 10 worksheet for diffrent departments but i only need info from the Veneer Log Sheet.
I have a sheet that I want to have a double line border around the outside. Thats easy if there were a set number of rows but in my sheet the number of rows will depend on the size of the rows because of the different amount of information in each cell. So how do I make it print a border around the entire sheet no matter how many rows are in the sheet??
Example, I have a sheet named DATA1, I want to add a new worksheet, copy a certain range from the DATA1 sheet to the new sheet and rename it the same name DATA1 and delete the old DATA1 sheet.
Also, the sheetname will be unknown, the macro must get the sheet name first.
This work is challenging for me, now am doing Comparing the Data between One Sheet to Another Sheet, and Paste into Different Sheet.
I am Manually Comparing the Data between two different sheet, If the Data is matching, or Not matching, those data i have document in other sheet, So i have lots of records available. so manually doing its very difficult, but macro can compare the data. I will give the details of my process and example sheet is attached here....
Data 1.xls == This sheet have multiple tab with data and different order no.(Multiple Tab with thousands of records available) orderNumberModified.xls == Modified data available. (Compare the OrderNumber to Data1.xls)
Now we have to compare the modified.xls and Data1.xls... For modified.xls have ORDERNUMBER available, that Numbers match with all tabs from Data 1.xls sheet.
If ORDERNUMBERS are matching, Need to copy the entire row from modified.xls To AVAILABLE TAB from Comparedata.xls sheet If ORDERNUMBERS is not matching, copy the entire row from modified.xls To NOTAVAILABLE DATA tab from comparedata.xls sheet
