I have been trying to get the row number of a cell to be decided by the integer result of a function. My thought was to do something like this .........(D(MATCHxxxxxx))....... With "D" being the column and "MATCHxxxxx" representing some function that results in an integer.
View 3 RepliesI want to have a warning message appear when a particular cell function result is a specific number, probably very simple to achieve.
View 9 Replies View RelatedI have a lots of number arranged in a column. I want to take log of each number (on the base 2) and show the result in the adjacent column. I want this to be in a macro and the results to be displayed all at a time (I dont want to drag the cursor down to get log values for number corresponding to each row).
View 6 Replies View RelatedI get sent a spreadsheet on a daily basis and the naming convention is the date, the format is like DDMMYY.xls. I'm trying to set this as a DIM.
I've scanned other threads and I am trying to incorporate what what I've seen, but because I'm not sure what I'm doing I think I have it slightly wrong. (I've also just thrown in too much code I think).
Can this Formula work? Where if c2<e5 then its value is a number. The formula below is what i tried but it didnt work
=IF((C2<E5);"c5=value=f5")
I would like to look at an array and find the largest number. Once that is found, return the text value that is in column B from that row. For example:
Column....A.......B.........C.....D
....................Apple......5.....1
...................Banana.....2.....3
...................Orange.....2.....7
In this example, I would be looking at the array C1:D3. Because the highest value is 7, I want the text "Orange" to be displayed in a new cell such as A5.
To find the largest number, I am using =Large(C1:D3,1). How do I display its' corresponding text value from column B in a new cell?
How do I change the color of a cell as the result of a logical function?
For example: =IF(A1<A2,A1 is yellow, A2 is yellow).
how to run a macro from an IF function, if the function is true macro 1 runs if the function is false macro 2 runs.
View 2 Replies View RelatedI'm trying to do a formula that references a cell and returns a different result dependant on the number in the cell being referenced.
For example I've said if A1 has a 3 in it then put the word TEST as the result, plus if it has a 4 put the word RESULT.
What I wrote as my formula is as follows-
=IF(A1=3,"TEST")+IF(A1=4,"RESULT")
It works fine when I only use one result but goes wrong when I add two. If I change the words I want to show to numbers it comes up fine but with words it just returns a Value error.
Say I have (cell A1) 10 salespeople and they each sell a (A2) $100/month membership, so I have (A3) $1,000 monthly revenue.
(A4) is an assumption about how many months the average person will stay a member.
So if A4 = 6, (6 month membership assumption) how would I get Excel to output $1,000 (the result from A3) into cells B3 through B8
but then for instance if A4 = 3 (3 month membership assumption) it would only output the the $1,000 result from A3 into cells B3 through B5
So like A1 through A4 of...
10
$100
$1,000
6
would output $1,000 into B3 through B8
but
10
$100
$1,000
3
would output $1,000 only to B3 to B5
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)
second question
I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)
I want to run a macro if the result of an IF function is true.
E.g. cell J55 contains =IF(H55>I55,"Goodbye","")
H55 contains =NOW()
I55 contains =DATE(2012,12,31)
Now by changing the dates etc. it prints Goodbye.... simple enough, but what I want is for it to run a macro that selects a range from the previous year's figures and simply changes the fill colour on the range. The macro for this also works fine.
I have a huge worksheet that contains four character payer code in column D for example: 9081, M897, 0235. I am looking for a function that will show the result in column AD
IF payer code in column D starts with a 9 (9???) - GOVT
IF payer code in column D starts with a 7 (7???) or M (M???) - MNGD
IF payer code in column D starts with a 2 or 0 (zero) – COMM
IF payer code in column D starts with either Z, I, C - PTR
I tried IF function, but it didn’t work for me.
I've created a Database using excel which feeds data to a pivot table I created based on it. My objective is to create a new item in this pivot table (Pivot Table > Formulas > Calculated Item) which calculates the average data for the past 6 months.
The formula I used in order to get a result is this:
=IF(((May+June+July+August+September+October)/6)=0;;(May+June+July+August+September+October)/6)
and the problem is that the answer is 0 when there is no data for all 6 months (for example, there is a customer who hasn't baught anything during the past 6 months), the pivot table displays 0, instead of not showing this customer at all. My goal is for the IF function not to return any data if the result is 0, so that the pivot table doesn't show items with no data.
I also tried:
=IF(((May+June+July+August+September+October)/6)=0;"";(May+June+July+August+September+October)/6)
and also using ;" ";
but these formulas return #VALUE! in the pivot table, given that the Data is "SUM OF Sales" and "" is not a number.
How can I get the formula not to show anything at all?
In addition to this, I was wondering if it is possible to make this formula more automated, so that it calculates the average of the past 6 months, taking into account some type of reference month (rather than having to edit the formula each time a new month is analyzed).
I have a simple/dumb question... How do you "capture" a value that is returned by a custom function.
I have tried searching the forums for this & I know that I should by all rights know how to do this by now... but I just can't figure it out.
Here is a Function that I copied from Ktrasler in this thread:
Week Numbers
Public Function MyWeek(DateArg As Date) As Byte
Const BaseDate = "30/12/2001"
DateArg = CDate(DateArg) - (Weekday(DateArg) - 1)
MyWeek = Int(((DateArg - CDate(BaseDate)) / 7) Mod 52)
If MyWeek = 0 Then MyWeek = 52
End Function
I know how to pass variables to Functions, and tried this one out & it worked splendidly for my needs, but how do I take the value of "MyWeek" and use it in the subroutine that I am calling it from?
How do you use the result of the "Address" function as ranges for other formulas?
I have 2 cells A1 and A2, each containing an "Address" function to find the start cell and end cell of a range.
A1 shows the result "$J$6" and A2 "$AB$6". These are working fine:
A1: =ADDRESS(ROW($A6),MATCH(HLOOKUP('cleaned up'!$I$2,pivot03!$2:$2,1,FALSE),$2:$2,0),1)
A2: =ADDRESS(ROW($A6),MATCH(HLOOKUP('cleaned up'!$I$5,pivot03!$2:$2,1,FALSE),$2:$2,0),1)
I want to get the average of this range using cells A1 and A2, but Excel treats the formula as an error: =Average(A1:A2) shows the error #DIV/0!
Going back one step and putting the formulas within cells A1 and A2 into the average formula doesn't work at all with a colon:.....................
i have the formula "= sum(A1:A10)" in cell A4 & would like to call macro when the value changes. The code i'm using below work's if I manually type in a value, but isn't working with the formula.
Private Sub Worksheet_Change(ByVal Target As Range)
' Checks for cell value change
If Intersect(Target, Range("A4")) Is Nothing Then
Exit Sub
' If cell value change, calls msgbox based on criteria
Else
If Range("E4").Value = "C" And Range("A4").Value > "30" Then
Call MsgBox1
End If
If Range("E4").Value = "F" And Range("A4").Value > "38" Then
Call MsgBox2
End If
End If
End Sub
I want the A4 cell contains the calculation of B4 (but the number gained from the funtion row and if the B1 cell contains the number 10 the K(B1)=K10
[A4]=B(row())*K(B1)
I am trying to acccess a cell value from a seperate worksheet. The cell reference needs to be generated by a seperate formula. In this example
=DSInfo!C28 // provides the correct result i.e the contents of cell C28 on worsheet DSInfo =MATCH(A4,DSInfo!C1:C35,0) //provides the correct row number - in this case 28
However on trying to combine the two =DSInfo!C&MATCH(A4,DSInfo!C1:C35,0) // provides only a formula error. I'm guessing this is a simple syntax error on my part but after hours of trying various ways I'm still having no luck.
I am attempting to get an INDEX function with multiple "IF" statements to return more than one result. Building multiple IF statements. That portion of the below formula works. However, I can only get the INDEX formula to return the first, single result.
Formula:
=IFERROR(INDEX(Func_Area,SMALL(IF(Const_Start<=DATE(YEAR($B$2),MONTH($B$2),DAY($B$2)), IF(Cost_End>=DATE(YEAR($C$2),MONTH($C$2),DAY($C$2)),ROW(Func_Area)-MIN(ROW(Func_Area))+1,"")),ROWS($A$4:A4)))," ")
Func_Area,Const_Start,Cost_End are all Named Ranges on Sheet "Proposed". My intention is to return a list of projects on Sheet Test1 for all projects starting construction after a certain date and completing construction before a certain date. I suspect something in my ROWS fuction or ROW-MIN+1 is wrong.
This formula returns the first result in the first row, but every subsequent row is blank...see attached spreadsheet.
In the attached file I used =MATCH(TRUE,INDEX($B$2:$B$10="",0)) to retrieve the location of the first empty cell.
When using the "Evaluate Formula" tool, it is clear that the position in the array created by the INDEX function is the 6th. Nevertheless, the final outcome is 9, being the last cell in range.
I have this COUNTIFS expression buried in a larger formula:
COUNTIFS(Table[C7],Table[C7]&"",Table[C21],">=1")
and it always returns a value of zero or some positive integer.
I'm now looking for a little "function" that I can wrap around this expression that will:
A) indicate any non-zero result as 1 or TRUE
and
B) indicate any zero result as 0 or FALSE
Something like...
AREYOUNONZERO( (COUNTIFS(Table[C7],Table[C7]&"",Table[C21],">=1") )
I'm sure there's a fairly efficient way to do this... but I'm totally stumped at the moment!
How can I sort two columns of function results using the result value? Excel is trying to sort on the function in the cells rather than the results themselves.
View 9 Replies View RelatedI need some code to search "database" sheet column B:B for value "SearchString" and then either select the cell (0, 86) to the right or count the rows so I can move the the cell in the correct row.
View 14 Replies View RelatedI have a problem with the today Function. It appears that it changes each day. But that isn't what I want! I'd like to have a funtion that puts the current Date in a field when Data is being added in the Row and then having this date static the next day. Here is what I had so far but I have no clue to make the date static:
=IF(C10>0;TODAY();IF(D10>0;TODAY();" "))
in this case it checks for information in field C10 and D10 and if there is information it will add a Date like 2006-03-22. But new day the field will change to 2006-03-23 and that is not what i want. I want it to stay the same when data is put in and the date is being presented.
Name
Day
Total
AlanMon400AlanThur600TomMon200TomWed300JamesMon1000Output4002001000
What function/formula can I use if I want that function to accept 2 criterias and returns me a result. Based on the above example, if the criterias are Alan & MOn, it will return 400 and if the criterias are Tom and Mon, it will return 200 and if the criterias are James and MOn, it will return 1000. Bascially, I want a function that can accepts 2 criterias. I do not want to sum up the total of the rows that are associated with one of the criteria i.e Alan. For Alan, I want 400 instead of 1000
I'm building a real estate payment calculator. I'm using the Payment (=PMT) function in Excel 2003. When I add the information that it asks for in its wizard, I receive the correct numerical figures but with a minus sign in front of it making the result negative, i.e. "-$630.13" instead of "$630.13."
Is this file corrupted or have I put something in incorrectly?
VBA code to use input box result in a Concatenate function.
Sub test()
Dim DistName
DistName = Application.InputBox("Enter District Name")
ActiveCell.FormulaR1C1 = "=CONCATENATE(R[-2]C[1],"" Diabetes Dist"")"
End Sub
I want to replace R[-2]C[1] with the result from the input box.
I'm currently working on a program in which some sort of recursive looping seems logical.
The relevant part of the code I've currently written looks like this:
Sub hello()
Dim Max_stream As Integer
Dim j, jj As Integer
Dim P_sum, P_min As Double
Dim antal_in, antal_ut, rad_in, rad_ut, ut1, ut2 As Integer
Application. ScreenUpdating = False
Max_stream = WorksheetFunction.Max(Worksheets("Data"). Range("B65536").End(xlUp).Value)
For j = 1 To Max_stream
The problem with the code above is the last If, in which the function "rekursivloop" calls itself. I don't know if this type of formulation is correct, but for the cases the If condition is TRUE (ie ut1 <> ""), the function does not return any answer. Does anyone see an error in the logic or have some example for how to write similar recursive loops?