I have a spreadsheet where I need to check if one cell value is greater than 6 other cell values in the row, then have it enter 1 in another cell if so.
For example: C1=5 C2=2 C3=3 C4=2 C5=7 C6=0 C7=4
The largest value is in cell C5, so I would like C6 to show that it is by entering a 1 in there.
I have been trying to determine the maximum/minimum value and additional count from a variable range which then I can use to subtract the first data of the range; I have been able to do that for a fixed range but not a variable one.
I have Column A with random positive numbers.
I have Column B with random negative numbers.
I have Column C with random numbers.
I have Column D with random numbers.
I have Column E with random 0’s and 1’s.
I have a set of 1600 cells of numerical data on each of the columns and there will be times when the random 0’s and 1’s from Column D will have appear repeatedly before changing to the opposite number, fx, I will get 7 nr. 1s before I get a 0 (zero).
I have been able to obtain the values in 2 cells within a fixed range:
If the last 8 cells in Column D have been “1” then I do:
F1=MAX(A1:A8)
G1=INDEX(C1:C8;MATCH(9.99999999999999E+307;C1:C8)) ---(Which provides the first number of the range in Column C after Column D has changed from 0 in D9 to 1 in D8)
H1=(F1-G1)
If the next 3 cells in Column D have been “0” then I do:
F9=MIN(B9:B11)
G9=INDEX(C9:C11;MATCH(9.99999999999999E+307;C9:C11)) ---(Which provides the first number of this range after Column D has changed from 1 in D12 to 0 in D11)
H9=(G1-F1)
Additional to this, the COUNT has also been challenging since I want to obtain in Column I, the COUNT of repeated 1’s from each range of 1’s in Column D; and also in Column J the same but for 0’s.
Fx:I18 (size of the range of 1’s originated from D1:D8)
J93 (size of the range of 0’s which consist to be the next range before 1’s were originated)
I12X (size of the range of 1’s which consist to be the next range before changed to 0’s)
However, that only works for a fixed range and continuous updates are made.
Book1.xlsx
[TABLE]
item01/11/200702/11/200703/11/2007
a1710
b2611
c359
[/TABLE]
I have the above table. I would like to determine which is the item that has Maximum value on a particular date. example on 2/11/2007, the maximum value is 7, so the result should be item a. How can I achieve this by using a formula.
I have two columns of data with a minimum value in the first column and a maximum value in the second column. What I'm trying to get is an indicator in a third column which tells me if a whole number falls at or between the minimum and maximum values. Here is a sample of my data:
A1 B1 C1
0 0.1 TRUE
0.2 0.5 FALSE
0.6 0.8 FALSE
0.9 1.2 TRUE
1.3 1.6 FALSE
1.7 2.0 TRUE
I recently asked how to locate a max value within a variable range using a macro and got the following responses: Get Maximum Value From Graph / Chart, all of which worked great.
Dim r As Range
Set r = Range("D2", Range("D50"))
Range("K1").Value = Application.WorksheetFunction.Max(r)
Range("Max1") = Application.WorksheetFunction.Max(ActiveChart.SeriesCollection(1).Values)
Start = "D24"
Finish = "D163"
Range(Start, Finish).Select
myrange = Selection.Address
Range("Max2") = Application.WorksheetFunction.Max(Selection)
Now I would like for a different cell to return the time value located one column to the left of the max value found above. I've tried to adapt other offset formulas that I've found to my purposes and haven't been able to make it work. how to do that using the max value as it is found in any of the above three ways
Column A contains a giant list of pathogens, with each often appearing in several ways (with/without species name, various misspellings, etc.) Column B contains truncated versions of maybe 20 or so pathogens that I'm interested in. What I want in column C is for an "X" or something to appear every time the code finds a pathogen of interest (that is, from column B) in the corresponding row of column A. For example:.............
View 4 Replies View RelatedI have a large collection of datasets, sorted/grouped by rows. I need to perform some calculations against these SETS (Ave, Low, Median, etc.).
The number of member in each SET is variable (1 to NN), the number of SET Members is included in the data. Example:
Code:
3 Data Sets:
Row Set Members Price Ave
1 A 4 $1.00
2 A 4 $1.25
3 A 4 $1.50
4 A 4 $1.75
5 B 1 $4.00
6 C 3 $10.45
7 C 3 $14.50
8 C 3 $17.75
how to compute the AVE value for each SET above?
I am thinking if I can determine the FIRST Row number for each set, add the MemberQty as an ~offset to determine the LAST Row, then use an Indirect reference to compute the ave, something like:
=AVERAGE(INDIRECT("D"&A1&":D"&A1+C1)) The SET's Ave value should be added to EACH row in each SET.
I am struggling trying to point a formula like this to the First Row of the NEXT set.
I am trying to make a spreadsheet for bank reconiliation. I found this formula, =if( countif($B1:$B$1000,D1),D1)=0,D1,"") but there are two open parathese and three close. What needs to be corrected?
View 3 Replies View RelatedFrom A1:A500, I have data with different numerical values. I want to be able to use a corresponding column and rows (example: B1:B500) where I can enter formula where maximum values where be reported. This I would like to change with a simple change of a single cell value (example: C1). So, If C1 has a value of 10, it will be used from every b cell to create a maximum value that would use a range going back only 10 cells for A.
View 9 Replies View RelatedI am trying to get the maximum from a range of text cells. The data in the cells consist of
00001
00003
00014
00028
00007
etc.
the formula I am using is:
=MAX(VALUE(Interface!E2:E20))
the answer that is returned is 15 and it should be 28. Any ideas on how I can fix this?
I am trying to sum 44,582 cells in a column, the values in all of them are either 0 or 1, but I always get a value of 0.
It works when I bring this right down to 1000 or 1500 cells but it can't seem to sum the entire range.
This is Excel 2004 for Mac OSX Version 11.3.5
How to lookup for greater than a given particular value in a list of data? Suppose the value to find is in cell C17 & the column to be looked for is F, in the attached sheet. Now the data range is from F8:L27. If the value in C17 is not present in Column L, then the value greater than the specifed value should be searched in Column L. I have tried using VLOOKUP, but cannot find for a range of values.
View 2 Replies View RelatedI was hoping that my formula would give me the count number based on the Maximum time (latest time) and the Name field...My result is a 0 instead of 62 (the correct answer).
=SUM((Download!$H$2:$H$10=A4)*(Download!$D$2:$D$10=MAX(IF(Download!$H$2:$H$10=$A4,Download!$D$2:$D$1 0)))*Download!$I$2:$I$10)
Would a Index/Match/MAX function be more efficient?
I have used max and min function to display minimum and maximum time value; however, it is not displaying the correct time value from the list. I think there is a better formula to achieve this. From the sample data displayed below, minimum time value should be 11:30PM and maximum time value should be 6:30AM
See sample data below:
4/1/2013 11:45 PM
4/1/2013 11:30 PM
4/2/2013 6:30 AM
4/2/2013 6:15 AM
4/2/2013 6:00 AM
4/2/2013 5:45 AM
[Code]....
I hope the title makes sense. I have a spreadsheet that I'm trying to use to calculate volumes of liquid. For each liquid there is a minimum and maximum amount that can be included in a vial, and a checkbox to indicate if it should be included or not. What I'm having trouble with is some logic (other than a million if= statements) to determine the amount of each needed.
If only a few are selected, using the max value for each is fine as it is below the volume of the vial, so I want to use the max. But if enough are selected, the max for each would exceed the volume of the vial, and I want to pick a percentage of each component's range until we get a volume that will fit in the vial (ie, it figures out that 84% of the max for each will fit, but knows never to drop below the min).
I have the two buttons on userform "viewer" that try to push the listbox past it min and max range. resulting in a error. Could it be that if listbox is at min it set the button to hidden.
View 4 Replies View RelatedIs there a formula to count gaps? If you see the sheet below, I want to count maximum gaps in range A1:J12 and put that count in column L.
******** ******************** ************************************************************************>Microsoft Excel - Book2___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutL12=ABCDEFGHIJKL1X XX XXX 22X X X 33 X X 64X X 85X X X X 26 X X 47 X X 48 X X 59 X X 610 1011 X X X X X 112X 9Sheet1 [HtmlMaker 2.42]
To see the formula in the cells just click on the cells hyperlink or click the Name box. DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I am now working on an excel spreadsheet which will automatically update every day so that one row will be added on the top of the sheet everyday.i.e.
A1 Date Price
A2 (New row added,date) (New row added,price)
A3 16/1/2013 5.5
A4 15/1/2013 5.6
A5 14/1/2013 5.45
... ...
Assuming that I am looking for maximum value of the column "Price", since max() cannot be applied to variable range, is there other method I could useto look for the most updated maximum value of column "price"?
selecting a range under a condition. I'd like to write a macro to find the maximum value for a certain ID. The number of ID rows (left column) is unknown so can't say range("A1:A5"). Then have the ID and max number shifted to another column. Maybe use 'rows.count' ?
Eg.
4009 5
4009 9
4009 8
4009 4
4005 7
4005 3
4005 9
3008 10
3008 11
Is there a easy way to calculate the MAX or MIN of column B dates to column A items that have say many different dates in column B? see attached excel file to show what I am looking for. How to calculate the MIN value in column "B" of the items in column "A" with formula in column "C"...
View 2 Replies View RelatedI am looking for a way of finding the maximum value in column H for each row in a pre- filtered range using VBA.
For example, the result of of filtermacro1 may return several records derived from a database of several hundred records. In the example below, the name of the person is in column C, followed by their H column value.
Audrey Perkins, .5
Marc Bloomberg, 2.0
Matt Phillips, .5
Paul Pachson, 2.0
However, the H column value may not be the maximum value for the rows above, as there are other records for Audrey, Marc, Matt & Paul in the database.
If the names are matched to the max value in column H for each record it should read
Audrey Perkins, 1.0
Marc Bloomberg, 3.5
Matt Phillips, .5
Paul Pachson, 6.5
How would I query only the names in a pre-filtered range and obtain the highest value in column H for each ? These values then need to be copied to H7 in a sheet called Detention Register.
I use code as below to find max or min data row, data is in not integer, but match doesn't work, I got error 1004, "Match function's properties can't be accessd".
Sub SelectMaxMin(ByVal vSheet As Worksheet)
Dim i As Integer, oRange As Range, iRowMax As Integer, iRowMin As Integer
For i = 4 To 23
Set oRange = vSheet.Range(Chr(64 + i) & 6 & ":" & Chr(64 + i) & 82)
iRowMax = WorksheetFunction.Match(WorksheetFunction.Max(oRange), oRange) + 5
iRowMin = WorksheetFunction.Match(WorksheetFunction.Min(oRange), oRange) + 5
vSheet.Cells(iRowMax, i).Interior.ColorIndex = 40
vSheet.Cells(iRowMin, i).Interior.ColorIndex = 35
Next
Set oRange = Nothing
End Sub
Look in Column E and find the MAX value. Once you find the MAX value, (let's say E27) display the date that's in C27. I bet this is really easy but I've been screwing around with it for over a half hour and can't get the correct result.
View 2 Replies View RelatedI have two columns of data. The first column is the 'type' and the second column is the 'value'. I need to find the maximum 'value' for each individual 'type'
The 'types' are not necessarily next to each other and the data cannot be sorted to do so.
Example:
type value
A 15
B 6
A 21
C 7
B 13
I need to be able to say the MAX for 'A' is 21, the MAX for 'B' is 13 and the MAX for 'C' is 7.
I am having a bit of amnesia right now, but I know there are some smart cookies out there who can do this in a second or two.
I have a certain range in a worksheet (D6:D27). I need to find the first blank row, or the last row with data +1. I would like a worksheet function of some sort that might be used like this
=LastRow(D6:D27)
The result would be row 10 (the first blank row).
I have been searching for the past hour and just can not get anything to work right. I have tried many different suggestions, but I still draw a blank.
I have an Excel Worksheet with 80,000 lines on it. The Columns are arranged thus:
Col A
Col B
Col C
Col D
Col E
Col F
Code
Description
Cost
Rate
Mobile
0.13
1234
Australia Mobile
0.12
Not Mobile
[Code] ........
I am looking for an Excel Formula that will look up Australia & Mobile and then return the highest value of the range of cells it finds that meets that criteria and enters that value in the Rate column next to mobile (F3).
Then I just want a variant of the same formula that will look up Australia but exclude Mobile and then return the highest value of the range of cells it finds that meets that criteria and enters that value in the Rate column next to Not mobile (F4).
What is wrong with this formula
=MAX(ADDRESS(VALUE(D2),1),1 & ":" & ADDRESS(VALUE(D1),1))
when D2 is 2, D1 is 6 and
=ADDRESS(VALUE(D2),1),1 returns $A$2
How to decide the two range object variant represent the same range? Plz check the following code, How to decide Rng4 and Rng5 is or not the same range?
Sub IsTheSameRange()
With ActiveSheet
LastRow = .Cells(65536, "B").End(xlUp).Row
Set Rng1 = .Range(.Cells(3, "K"), .Cells(LastRow, "K"))
Set Rng2 = .Range(.Cells(3, "AE"), .Cells(LastRow, "AE"))
Set Rng3 = .Range(.Cells(3, "BQ"), .Cells(LastRow, "BQ"))
Set Rng = Application.Union(Rng1, Rng2, Rng3)
Set Rng4 = Rng.SpecialCells(xlCellTypeFormulas, 23)
Set WhlRng = .Range("A3:DR" & LastRow)
Set Rng5 = WhlRng.SpecialCells(xlCellTypeFormulas, 23)
End With
End Sub
I have a range varable (say productxrange), is there a way to determin if that range is empty?
View 4 Replies View RelatedI have a spreadsheet with two columns - column A contains dates and column B has the corresponding data (always numbers). The data is not uniform (i.e there may be lots of entries in any given day and none over the next few). The data is always sorted in chronological order.
I want to set up a summary table to show the min, mean, median, max for each week. I have set up an array to calculate the mean, but I am having trouble working out a good way of gettting the others short of having a set of columns that manually define each cell...for instance =min(b3:b27) or =min(b28:b30).