Determine Cell Above Maximum Value Of Row
[TABLE]
item01/11/200702/11/200703/11/2007
a1710
b2611
c359
[/TABLE]
I have the above table. I would like to determine which is the item that has Maximum value on a particular date. example on 2/11/2007, the maximum value is 7, so the result should be item a. How can I achieve this by using a formula.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Determine If Cell Maximum In Range
I have a spreadsheet where I need to check if one cell value is greater than 6 other cell values in the row, then have it enter 1 in another cell if so. For example: C1=5 C2=2 C3=3 C4=2 C5=7 C6=0 C7=4 The largest value is in cell C5, so I would like C6 to show that it is by entering a 1 in there.
View Replies!
View Related
Find The Maximum Value In One Column And Retreive The Name Of Cell In Corresponding Row
I spent couple of hours trying to figure this out, but without success. Please check the attached example. I need a formula that will find the max value (number of views in English anguage) in the column "I" and display the corresponding "Headline" value in the column "B". In the example it is "Headline 5". I can not change position of the columns, i.e. "B" must remain "B" and "I" must remain "I". I experimented with Index and vlookup but to no success. I have outlook 2003.
View Replies!
View Related
Copy/Fill Down Formula To Maximum Row Of Last Cell In Columns
In a worksheet I retrieve data from a SQL query. Now I have to add 5 different calculations per row and each calculation will be stored in a new cell (so 5 columns will be created) I want to do this with a loop macro and calculate this till the last "filled" row. The number of rows differs every month. What loop code should I use and can somebody give me an example of the VBA code. Note that some formulas contains nested If-functions.
View Replies!
View Related
Determine Last Used Row
i need to have this information entered in the row below each time which may or maynot be empty. i need a message box with error handling to ask if the user wants to enter more products or finish and another message box if the entries (which start at cell B4) go past B10 that they have to exit and start a new sheet. I have put the code below and attached the workbook so it may be of use to others Option Explicit Sub Locate(Name As String, Data As Range) Dim rngFind As Range Dim strFirstFind As String With Data Set rngFind = .Find(Name, LookIn:=xlValues, lookat:=xlPart) If Not rngFind Is Nothing Then strFirstFind = rngFind.Address Do If rngFind.Row > 1 Then ListBox1.AddItem rngFind.Value End If....................
View Replies!
View Related
Displaying The Maximum Value For Each Row Of Data
I have some code and it's not quite working. For each row of data in my table (each row of data is contained in columns D:F) I want to display the maximum value in column H, of the same row. For some reason though it is putting it in 21 additional rows down. Sub Winner() Dim lngMax As Long Dim lngRowLast As Long Dim rng As Range Dim rngAll As Range Dim rngRow As Range lngRowLast = Range("D65536").End(xlUp).Row Set rngAll = Range("D2" & lngRowLast) For Each rng In rngAll Set rngRow = Range(rng, rng.Offset(0, 2)) lngMax = Application.WorksheetFunction.Max(rngRow) rng.Offset(0, 4).Value = lngMax Next rng End Sub
View Replies!
View Related
Need To Determine The Last Row In A Range
I am having a bit of amnesia right now, but I know there are some smart cookies out there who can do this in a second or two. I have a certain range in a worksheet (D6:D27). I need to find the first blank row, or the last row with data +1. I would like a worksheet function of some sort that might be used like this =LastRow(D6:D27) The result would be row 10 (the first blank row). I have been searching for the past hour and just can not get anything to work right. I have tried many different suggestions, but I still draw a blank.
View Replies!
View Related
Lookup Maximum Value & Return Corresponding Row
i have a matrix index| a| b| c| 0001 |1| 2| 2.22| ( probably it will be much clear to see the attachment) I need to lookup for the largest number in B2:D2 (in this case 2.22) and return the corresponding header ("C"). I though it would be simple with hlookup() and max() but i can't make it work.
View Replies!
View Related
Determine Row Number Of A Specific Value
I have a worksheet that contains active rows and hidden, inactive rows. On occasion, I would like to unhide an inactive row. I intend to do this by running a macro which will generate an input box to enter the file number of the row in question. I can restore the row, but what I am unable to find a solution for is converting the file number to the row number to be restored. The file numbers reside in column A, so if I input file number 2300, I need the macro to look through column A, find the cell that contains the value 2300, and return (as a string?) the row number that contains that value. From this I can have that row returned to visible status.
View Replies!
View Related
Determine Row Number Of Last Value In Column
Trying to do a simple workbook here, with hopefully no macros/VB script. Essentially, I want a cell to display the row number (-1 to take into account the heading) which has the last value contained in it. The workbook is a list of users that have signed up in 1 month, and is distributed to staff for a particular reason. The cell I'm trying to create is part of a 'stats' section.
View Replies!
View Related
Lookup Maximum & Minimum. Return Corresponding Row
I have searched your forums and thought I had found a sufficient answer but could not get the vba to work. So any help is greatly appreciated. I am trying to determine a max value from a list then put that value in a cell. Next I want to determine how many times and on what day that max value occured. From there take the value and concatenate them adding a "," between them I have attached an example. I would like the values placed in cells F1 and H1 (the other is a min value and when it occurred)
View Replies!
View Related
Determine Row Number For Data Found With Vlookup In Vba
DETERMINING ROW NUMBER FOR DATA FOUND WITH VLOOKUP IN VBA I have a user form with a combobox (called STKCODE) that calls up a vlookup routine to search for this item in a named range on a worksheet and retrieve related data to display on the userform. All this works fine. What I would like to know is how to easily determine the row number on the worksheet, representing the row the data is stored in, if thats at all possible....
View Replies!
View Related
Return Maximum Of Active Cell & Arbitrary Value To Cell
I am looking for VBA that will add the value of the current active cell on the sheet to the value in cell F12. The maximum value of F12 cannot exceed 1000. So if the value in F12 = 950 and 100 is the value in the active cell the maximum value in F12 should show 1000, not 1050. It should do this on the click of a button.
View Replies!
View Related
Maximum Cell Value
In a cell, I would like to limit the maximum upper limit. For instance, in a cell with (=H23*0.06), that value ranges from perhaps 1.48 up to 5.93; however, I would like for the upper limit to stop at 3.33. Would that be conditional formatting? How can I stop the upper limit at 3.33?
View Replies!
View Related
Maximum Characters Per Cell
I have a worksheet that multiple users will be entering in data, this information is then being used to pull into a form located on a sepearte worksheet within the workbook. One of the cells in the input sheet has the potential to have more characters than excel will allow. It is my understanding the maximum number of characters per cell is 1,024. What is the best way to setup my spreadsheet in the event the data contains more than 1,024 characters. The informatino going into the cell are legal descriptions of property so I want to be able to keep the description together in the final document in the other worksheet. Is there a way the user can input the entire decription in one cell, regardless of the character size, then have a formula to take the first 1,024 characters and put them in one cell, followed by another formula to put the next 1,024 characters in the next cell? Then in my main document I would use the concatenate formual to combine these two cells into one.
View Replies!
View Related
Cell Of Maximum Value In Another Column
I have a problem looking up the cell at which a maximum value in a curve is located. I have attached a workbook with an example of my problem (this is scaled down to limit the size of the attachment – my usual string of data is 5000 rows long). Column A is the time and all subsequent columns will contain force values (as shown in columns A and B) which create a similar sharp curve. Ideally I need to be able to lookup the time point (column A) at which the maximum force value occurs for each curve or if this is not possible the row number in which the maximum force value occurs. I would like to be able to do this using a formula rather than a macro if that is possible? I have tried using a number of excels lookup functions and read through the examples on the site but have had no success.
View Replies!
View Related
Determine Cell Value Or N/A
I am working on a spreadsheet where individuals must enter a value between 1 - 4 or n/a. I would like to include a formula for each question where if they enter a value between 1-4, this scores 1 and if they enter n/a this scores 0. Does anyone know a simple formula I could use, I have tried IF formulas but keep getting muddled.
View Replies!
View Related
Finding The Cell Address Of Maximum Value
I have a range of overtime data. I want to list the maximum occurrence of first 10 overtime data ( Like 3200,2950.2300....etc) Thereafter from the results obtained I need to know the cell address of the employee corresponding to the results obtained, i.e XYZ, ABC..... A B Employee Name OT Amount 1. XYZ 3200.00 23. ABC 2950.00 35. WER 2300.00
View Replies!
View Related
Return Cell Address With Maximum Value
I have two columns of numbers in column A & B. In column A I am trying to locate the maximum value and get the cell address of the number next to it in column B. I am currently using this formula to do this ..... =ADDRESS(MATCH(MAX(A1:A4),A1:A4),2,4) It works ok, but if the maximum number is the first value in the column it is returning the last cell address in column B. I am not sure what I am doing wrong.
View Replies!
View Related
How To Determine What Cell Was Selected
Can anyone help me in finding how to write the command in VBA to determine what Cell was selected in a worksheet? The objective is to know what Cell has been selected by double click event to pop up a userform with a calendar from which the user can select the date. I am looking at making it dynamic so I do not select a particular range. Can this be achieved? I guess yes, but how?
View Replies!
View Related
Determine If A Cell Is Bold Or Not
I'm trying to create a VBA module that will update data. However, I need it to skip any updates to data that has been set by the user. For simplicity, the user changes will be bold. I've found the info on the site for a function for counting cells in a range that are bold. But really just need to know how to get format of the cell.
View Replies!
View Related
Offset Cell From Found Maximum In Range
I recently asked how to locate a max value within a variable range using a macro and got the following responses: Get Maximum Value From Graph / Chart, all of which worked great. Dim r As Range Set r = Range("D2", Range("D50")) Range("K1").Value = Application.WorksheetFunction.Max(r) Range("Max1") = Application.WorksheetFunction.Max(ActiveChart.SeriesCollection(1).Values) Start = "D24" Finish = "D163" Range(Start, Finish).Select myrange = Selection.Address Range("Max2") = Application.WorksheetFunction.Max(Selection) Now I would like for a different cell to return the time value located one column to the left of the max value found above. I've tried to adapt other offset formulas that I've found to my purposes and haven't been able to make it work. how to do that using the max value as it is found in any of the above three ways
View Replies!
View Related
Determine Cell Content By Other Cell Contents
I am trying to write an "IF" scenerio. I want to be able to control what is put in a cell based what is placed in another cell. For example. I want to be able to only enter a credit/debit in B1 based by what I type in A1. If any cell in column A is any of these numbers (41,47,48,49,50,51,52,60,61,65,68,63,67,69) then any number entered in a cell in column B can only be a positive number. If any cell in column A is any of these numbers (40,42,43,44,45,46,52,53,55,56,57,64,62,66) then any number entered in a cell in column B must be a negative number. So if A1 is 41 then B1 must be positive (debit). If A4 is 42 then B4 must be negative (credit).
View Replies!
View Related
Determine If Cell Contains Any Text In VBA
I have tried searching for a way for VBA to recognise in VBA if a cell contains any text, but most of my searches respond to specific cases for specific characters in a string Basically, I'm just looking for the correct way to word a string of code that if it detects any text in column B (col 2 ) then it should not do anything, else it should cut the value in col 2 and paste it in col 8
View Replies!
View Related
Dynamically Determine Cell In Which To Apply Value
I've searched the forumn but have found no resolution to my dilema. I'm trying to accomplish the following: I would like to apply an Alternate number to a job that meets a certain criteria. The criteria is based on a Marker, which should be automatically determined based on the count of total jobs that are Estate or Custom. The Alternate number needs to be applied to certain % of the Jobs. What I've done is to get the count of jobs Estate or Custom then based on the count I have applied the Alternate % to determine the actual number of jobs that should have the marker applied. Here is where I need the help. The next step would be be to apply the marker to the number of jobs. I'm not sure how I can accomplish this task. Attached is an excel spreadsheet with an example of what I'm trying to achieve as well as what the end result should look like.
View Replies!
View Related
Vba: Determine If Cell Value Is In A Range
Column A contains a giant list of pathogens, with each often appearing in several ways (with/without species name, various misspellings, etc.) Column B contains truncated versions of maybe 20 or so pathogens that I'm interested in. What I want in column C is for an "X" or something to appear every time the code finds a pathogen of interest (that is, from column B) in the corresponding row of column A. For example:.............
View Replies!
View Related
Determine If Cell Value Is In Number Array
1. In column A i have a list from 1-12 (months in a year) 2. In column B i have the formula that references the corresponding cell in column A in the same row i.e. B1 "=(A1={1;3;5;7;8;10;12})" Problem: This formula works only when the value in column A equals "1"...i need it to work when it equals any of the identified numbers in the set.
View Replies!
View Related
|
TRACKER
