I am trying to make a spreadsheet for bank reconiliation. I found this formula, =if( countif($B1:$B$1000,D1),D1)=0,D1,"") but there are two open parathese and three close. What needs to be corrected?
View 3 Replies
Before my workbook is open the following code is run, which asks the user to enter the password. Depending on the password Range("name").Value takes values from the worksheet "Data" from table "M4:M20". The list of passwords is in the table "L4:L20". My code seems to be not optimal (too long). Does anybody know how to optimize this code?
Sub GoodMorning()
On Error Goto Error
'Prompt the user for a password and unhide the worksheet if correct
Select Case InputBox("Please enter the password", _
"Enter Password")
Case Is = ""
Call HideSheets
MsgBox "Sorry, that password is incorrect! Please contact the administrator.", _ ............
I require a row of details to be copied to another worksheet by typing in a unique ID using a macro so Sheet 1 is a data base of items (every item have a unique code like 1001, 1002 etc) and sheet 2 has a table, and next to the table is a cell, which i need to work like a search engine.
i need to be able to type the unique id in a cell, in sheet 2, then click an Add command Button. This button then finds the unique id in sheet 1, and copies all the items details in the same row, into sheet 2 in the table, then i require the search engine to be cleared for the next item to be added. (Assumed Experience:Below Average, I know few formulas and know very basic macros)
I am attempting an If Or formula and keep retuning a #Value error, I can't for the life of me figure out why.
This is the formula that I have written.
=IF(OR(H44,H45,H46,H47,H48)="Other:","True","False")
Cells H44,I44,J44 have been merged into one cell (H44), and the same for 45,46,47,and 48 - Could this affect the Formula?
Im trying to write a formula that will check if a name that I have in column A also appears in column B and if it does I want it to return a value for example TRUE in column C.
I'm currently doing a survey and I have all employees in column A (600persons) and then column B I enter thos that have taken the survey. So If an employees name exist in column B he/she has done the survey and then they I get the value "TRUE" or "1" or something else. So in this way I can easily see who has and who hasn't done the survey. I've been trying with VLOOK and so on but I can not get it right? Maybe I need VBA?
I have the following data set:
1
Test
2
Testing
3
Test 3
4
Test
Exists on line 1
5
Test 5
6
Test 6
7
Testing
Exists on line 2
So basically I'd like to know if there is a duplicate line item what line item the duplicate actually exists on. Is there an easy way to do this with a formula?
I have a database of 6 digit numbers in one column(let's say column A). I would like to put in a 6 digit number in a cell (b1)and have another cell (c1) give me a response as to whether that number exists in the database (Exists or Doesn't Exist).
View 2 Replies View RelatedI'm sure this will be an easy question, but I've been searching for awhile and can't seem to find an answer. I'm trying to write code in VBA that will check if a directory within c:documents and settings...my documents exists, and then save a file to that directory. The problem is, I'm having trouble finding the my documents directory. Is there some object or property that I could use to find the my documents path? Note that the worksheet that I'll be working with is in a separate directory, and therefore neither activeworkbook.path nor thisworkbook.path would be an option.
View 3 Replies View RelatedI have programmed an Excel file that removes all the standard commandbars from Excel and then opens a custom commandbar, I built, with limited functionality ( Named "Limited"). When I open this file on another computer, since that custom commandbar does not exist in that copy of Excel no Limited commandbar shows. So I created a macro that builds the custom commandbar when a file is opened. What I want is when the file is opened on subsequent times that it checks to see if that commandbar already exists. If it does, it skips the macro which builds this custom commandbar for the first time. It then disables the standard Excel commandbars (code written already) and enables the "Limited" commandbar (code aleardy written).
View 2 Replies View RelatedI have two columns of data with a minimum value in the first column and a maximum value in the second column. What I'm trying to get is an indicator in a third column which tells me if a whole number falls at or between the minimum and maximum values. Here is a sample of my data:
A1 B1 C1
0 0.1 TRUE
0.2 0.5 FALSE
0.6 0.8 FALSE
0.9 1.2 TRUE
1.3 1.6 FALSE
1.7 2.0 TRUE
If the data entered in Column "I" starting from row4, exists in range "X4:X12" then "Pend for audit" should appear in Column "R" of the corresponding row.
below is the coding Iam using.
Code:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim StateName As String
Dim CName As String
Set Cells_Changed = Target(1, 1)
[Code]...
This is a conditional formatting problem I have not been able to resolve:
I have a range, say A1:N30
Each cell contains a text/number combination.
I would like to highlight each cell on a specific row if the vale exists within the row above - the issue is that the cell values are not in the same columns.
I have attached a sample workbook with the desired output.
Conditional formatting.xlsx
I am trying to set up a conditional formatting which will look at the cell contents and check if the value exists in a range.
The range to compare will be over multiple columns and multiple rows.
I am trying to create a macro that will look in Column B for the word "RPLCASE." Whenever "RPLCASE" appears in Column B, the cells in that particular row will move over (Right) one space. I am simply trying to align the data from a file that I FTP'd from Net Term to Excel. You can see how the data should look in the 2nd example.
14-Feb-08JERRPLCASE671150536:116:56RPLCASE78308147:077:54RPLCASE89431228:228:57RPLCASE910592289:159:59RPLCASE10114732310:0010:48RPLCASE1112146811:4511:58RPLCASE12136563612:0612:56RPLCASE13144122113:0313:58RPLCASE14154642314:0114:23**********--------------TOTALS4632228LDLPKGPIK671361126:046:58PKGPIK781461247:007:56PKGPIK8963598:168:55PKGPIK9101591309:019:59PKGPIK101115113910:0010:54PKGPIK1112968711:3211:59PKGPIK121319916012:0012:59PKGPIK131412310313:0013:59PKGPIK141518716414:0014:59PKGPIK15161119715:0015:54PKGPIK16173316:3016:31**********--------------TOTALS13741178
Column A contains a giant list of pathogens, with each often appearing in several ways (with/without species name, various misspellings, etc.) Column B contains truncated versions of maybe 20 or so pathogens that I'm interested in. What I want in column C is for an "X" or something to appear every time the code finds a pathogen of interest (that is, from column B) in the corresponding row of column A. For example:.............
View 4 Replies View RelatedI have a large collection of datasets, sorted/grouped by rows. I need to perform some calculations against these SETS (Ave, Low, Median, etc.).
The number of member in each SET is variable (1 to NN), the number of SET Members is included in the data. Example:
Code:
3 Data Sets:
Row Set Members Price Ave
1 A 4 $1.00
2 A 4 $1.25
3 A 4 $1.50
4 A 4 $1.75
5 B 1 $4.00
6 C 3 $10.45
7 C 3 $14.50
8 C 3 $17.75
how to compute the AVE value for each SET above?
I am thinking if I can determine the FIRST Row number for each set, add the MemberQty as an ~offset to determine the LAST Row, then use an Indirect reference to compute the ave, something like:
=AVERAGE(INDIRECT("D"&A1&":D"&A1+C1)) The SET's Ave value should be added to EACH row in each SET.
I am struggling trying to point a formula like this to the First Row of the NEXT set.
I have a spreadsheet where I need to check if one cell value is greater than 6 other cell values in the row, then have it enter 1 in another cell if so.
For example: C1=5 C2=2 C3=3 C4=2 C5=7 C6=0 C7=4
The largest value is in cell C5, so I would like C6 to show that it is by entering a 1 in there.
I have 2 sets of data in my excel spreadsheet.
Column A has a bunch of numbers and some duplicates
Column B has the same numbers but lots more and no duplicates
Column C describes what column B number does
All I want is for my formula to return the value in C when A#=b#:b#. The if statement, that I can't figure out how to get it to work right is this. =IF(A2=B2:B1021,C2:C1021)
This is fine if the 1st value is true (meaning a2=b2), the problem is the IF statement returns the 1st value in the array(I think) which in this case is false. An example of the array is below, the result of my formula is always false unless i change B2 to equal A2.
00E200002-Way Mir
00E200012-Way Mir
00E200022-Way Mir
00E200032-Way Mir
00E000E22-Way Mir
I have a form, when I fill in the order no, I want it to look if the value exists in a range and then notify me with a msgbox. Here is my code - it doesn't work no matter what I insert into the textbox it tells me that it exist.
View 11 Replies View RelatedBasically, if a cell value exists in a list on another worksheet then move to next row. If the cell value does NOT exist then look at columns J, K, L and M and see if a specific value exists in each. If any of these cells contain this criteria then copy the row and add it to the bottom of a growing list on another sheet. Here is what I have so far.
Sub OrdersHeld()
Application.ScreenUpdating = False
Dim x As Double
Dim ws As Worksheet
Dim numberofrows As Double
[Code] ......
Hi all, this might sound really easy but I have a Named Range in excel 2003.
Now I'd like to write a VBA code to check if this range exists before carrying on futher computations.
How I can confirm whether a particular value exists in a range. i.e.
ABCD11Yes/No22
Does the Number 4 exist in the range
A1:A8?334455667788
Is there a way to check if a named range exists before I run a piece of code? I created a new file that has need for all the old file's ranges plus a couple more, and I want to use the same macro for both. So on the first file I just want to say, if these other named ranges are there, go ahead and do his other thing.
View 6 Replies View RelatedI need to summarize some information from a different worksheet. Worksheet A(WS-A) is the summary and worksheet B (WS-B) is the source of information. On WS-B I have a range of values under the title "Materials" which I use to put together an estimate. This range has about 25 rows and not all of them are populated depending on the needs of the particular job.
If it matters, the Materials cells are populated by a drop down "list" from yet another worksheet. On the summary (WS-A) I want to show only the cells from WS-B that have a value in them so that if, within the Materials worksheet, there are only 6 rows that have data in them...only those 6 rows are shown on the summary worksheet.
I'm looking to use the value from a series of dropdowns (made via data validation lists).
Cell AM5 is a dropdown of named ranges made form a seperate sheet
Cell AO5 is a dropdown that uses '=INDIRECT(AM5) to lookup the values in the named range.
I need cell AO5's value to be used to filter rows in the current worksheet. The current problem is when i use the first dropdown in AM5 it still displays the last value, untill i use the dropdown to select a new one. This value typically will not be found and i do not want my code to execute in these cases.
How can i find if a named range exists in a sheet using VBA?
E.g.: I have a named range called test that houses 4 numbers in four cells. Using
Code:
Dim rtest As Range
Set rtest = Worksheets("sheet1").Range("test")
.
.
.
.
rFoundCell = _
Cells.Find(What:=rtest, After:=Range("a1"), LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:= _
xlByRows, SearchDirection:=xlNext, MatchCase:=False)
Won't work. Run - time error 91 occurs.
If there are any cells highlighted in red (using the conditional formatting in excel 2003), I want a message box to pop up when they go to save saying something along the lines of, "Hey buddy, you really need to deal with this."
suppress range name already exists when coping out workbook. I’m coping the selected worksheet out to another workbook…sometimes I get a message that a range name already exists and do I want to rename or not?. I always want to say no (don’t rename)…?
Application. ScreenUpdating = False
On Error Resume Next
Dim wb As Workbook
Dim ws As Worksheet
Set ws = ActiveSheet
Set wb = Application.Workbooks.Open("\03-serverdatadatabasemarterialListingsArchive.xls")
If Err.Number <> 0 Then
MsgBox Err.Description & "help"
Else
'ws.Copy After:=wb.Sheets(wb.Sheets.Count)
ws.Move After:=wb.Sheets(wb.Sheets.Count)
wb.Save
wb.Close
'ActiveWindow.SelectedSheets.Delete
End If
Application.ScreenUpdating = True
MsgBox "Worksheet has been Archived..."
I'm trying to check if a named range "ActiveCells" exists before deleting it in VBA but can't seem to get the syntax right, I have tried: If Range("Activecells") Is Nothing Then Resume Next Else: ActiveWorkbook.Names("ActiveCells").Delete
AND
If ActiveWorkbook.Names("Activecells") Is Nothing Then Resume Next Else: ActiveWorkbook.Names("ActiveCells").Delete
Can anyone point me in the right direction? I have tried searching but I can only find threads about checking for named objects or about using the toolbars to add/delete named ranges.
I am having a bit of amnesia right now, but I know there are some smart cookies out there who can do this in a second or two.
I have a certain range in a worksheet (D6:D27). I need to find the first blank row, or the last row with data +1. I would like a worksheet function of some sort that might be used like this
=LastRow(D6:D27)
The result would be row 10 (the first blank row).
I have been searching for the past hour and just can not get anything to work right. I have tried many different suggestions, but I still draw a blank.
