I have an excel document with hundreds of columns. Each column should not be empty; they must have at least one value. Right now I'm applying a filter and going through each column one by one to make sure that it is not empty. How can I perform this check without having to go through each column one by one?
View 6 RepliesI have initiated a spell-check in VBA using:
View 14 Replies View RelatedPrice - Bulk Price - Total price
And i need to calculate the total price (totalprice = (PRICE OR bulkPRICE * 2.5)
If Bulkprice contains a number i need to use that field but if it's empty i need to use Price.
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
I'm trying to change a 15min report into a 1hour report by just adding the numbers of the 4 lines below and then adding them by doing something like
If TimeSerial(4, 0, 0) Then
a = ActiveCell.Value
b = ActiveCell.Offset(1, 0).Value
c = ActiveCell.Offset(2, 0).Value[code]....
the row includes 15 numbers so i already have 15 batches downwards with a offset for each so it would be well endless codes..
the sheet has about 5000 rows so i'm running a loop untill i = 50
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
I would like to count al the rows where in certain columns there are certain values.
For example:
=SUMPRODUCT(--(Bakjes!$C$2:$C$4000="1");--(Bakjes!$G$2:$G$4000="")
This works fine. However, I would like to look in columns N2:W4000 as well if in that specific row value x is present. This gives:
=SUMPRODUCT(--(Bakjes!$C$2:$C$4000="1");--(Bakjes!$G$2:$G$4000="");--(Bakjes!$N$2:$W$4000="x"))
This gives a #value error. Is it not possible to look in multiple columns at one time with sumproduct?
Any formula that can look at the data in multiple columns and check for a match - returning a value such as YES or NO. Below is an example of my sheet.
A
B
C
D
E
F
G
1
Name
Number
Name
Number
Name
Number
Match?
[Code] ..........
Basically the formula would be in Column G and would look at B, D, & F to see if they match or not. In the example above - row two - they all match. So a True, 1, or Text option such as YES would be great. Same as row 3 only you can see they are different.
I have a range varable (say productxrange), is there a way to determin if that range is empty?
View 4 Replies View RelatedRight now I am writing a macro with a defult action if an arry is empty. Unfortunatly the way I wanted to do it will not work becuse it can't recognize the difference between one entry in the array and no entries:
If LBound(array) = UBound(array) Then
This is my basic setup, each piece of equipment will have more than one routine to be performed:
Equipment Type
Make
Model
Serial
Location
To Be Performed
Frequency
Last Performed
Performed By
Next Due Date
R1
[Code] ..........
I want to track changes on "Last Performed" and "Performed By" and, if changed, copy both values to a separate "log" sheet. In total, there could be up to 10 routines for each peice of equipment. That means I would need to track 20 columns for changes. I would like this check to be done on save because that ensures that the user is satisfied with their changes and keeps the log from being flooded. And lastly, it needs stored in the log sheet in a way that I can identify which piece of equipment it was for and which routine was done.
How can determine if a range is empty without looping it till the first value is found? On a 5x5 range a for loop is not that bad but what if its the whole worksheet? Is there a fast way to do this?
View 3 Replies View Relatedif the active cell is formatted as number and I write
x = Cells(Row, Column).Value
and the cell is empty or blank, x will be set to 0.
How can I determine that the cell is blank and not actually 0 ?
This will probably turn out to be a really quick one: I've got some named ranges I'm working with that in of themselves use Offset to automatically expand a list.
View 7 Replies View RelatedI have a problem as I need to present data with different data sources. I'd like the calculations to be as "automatic" as possible. The data consists of countries and regions and their sales pipe. The pivot table doesn't give me all the data that I need to present so I need to add extra columns with calculations and data from other data sources.
The problem I meet is that the 'total row' within each group needs to be reflected in my columns as well (F:G) It works as long as the data I've imported has the same amount of States within each group of Contry but if the number of states differs with the newly imported data - my "manual" columns are wrong.
(A;B;C;D;E;F;G;H)
Country;State; Red; Amber; Green; Quota; Total PV; Coverage;
I've created a Pivot table on the first 5 columns [Country; ...; Risk] (A:E)
The following columns are manually entered based on the pivot (F:H)
Quota (data source from another sheet)
Total PV (a sum of Red; Amber; Green in the Pivot)
Coverage (returns % of TotalPV/Quota)
For each group Quota and Total PV needs to summarize the above data within the group. I've 'hard coded it' today (SUM(F3:F5)) - F3:F5 can as well be F3:F8 or F3:F4 depending on the imported data. I have 8 different Countries (groups) with different amounts of States and 3 different sheets for each Region of countries so I need this summary to be automatic based on what group (Country) it belongs to. How can I make the calculation different so that it's dynamic as well as the Pivot table? Today it's not dynamic and it needs my 'hands on'.
Quota =IF(ISNUMBER(SEARCH("total";A6)); SUM(F3:F5); IF(ISNA(VLOOKUP(B6;Quota!B:F;3; FALSE));" ";
IF(VLOOKUP(B6;Quota!B:F;3; FALSE)=0; " ";(VLOOKUP(B6;Quota!B:F;3; FALSE))))).
If I have several Forms check boxes assigned to the same procedure, is it possible to tell which check box called the procedure?
View 6 Replies View RelatedWorking in Excel 2007. I am using excel for a data log (basically) and want it to format all empty cells in a row yellow if there is data in column A
Basically, If i have a value in A2, I want any empty cell between B2-G2 to be filled in yellow (as an idicator to the inputter that the cell needs to be completed).
there is already conditional formatting on these cells, which i want to maintain for the non-empty cells. I also have "0" as a value, so I couldn't use the basic conditional formatting setting it =0, it highlighted cells with $0.00, which i do not want.
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx
Sheet1.doc
Sheet2.doc
I would like to rows based on multiple column conditions criteria. ie., if the columns N, O, P values are "", then hide the particular row. The logic given in the website here, i tried But, it is not 100% working. It works for a few rows at the start of the database & it works for the rows at the end of the database. In between, for a few rows, even if the column values are "" it does not hide those rows.
View 2 Replies View Related1 workbook, 2 worksheets (or tabs). On tab 1, I want a formula/alert that tells the user if any duplicate values exist in Column A of tab 2
Tab 2, Column A, has Unique ID's (6 digit numeric values)
The user manually inputs the ID's on new rows in Column A
Row 1 is reserved and in use for something else
Row 2 is my header, so cell A2 says "ID"
Row 3-623 currently contain unique ID's
When the user inputs a new ID into cell A624, then they return to Tab 1, I want my formula/alert on Tab 1 to tell the user that they have duplicates in Column A of tab 2. I know the Conditional Formatting, but if the user copies in 100 new values, they won't necessarily see the highlighted cells. My tab 1 is my "checks and balances" and the last place the user is suppposed to look to ensure that they haven't created any duplicate ID's. If the user sees a warning message that says duplicates exist, then I'll tell them that they need to look at column A (for cells that have been conditionally highlighted).
One issue that I'm running into with the conditional highlighting is that I want cells A3:A1048576 to already have the conditional formatting - this way when the user inserts a value into Cell A624, then A625, etc they conditional formatting is already there. Right now with data in cells A3:A623, cells A624:A1048576 are all highlighted with the Red/Bold Red Font (which is okay I guess), but ideally it would be nice to not count 2+ empty cells as duplicates and I'll have to have my formula on Tab 1 not include the blank cells.
I DO NOT want to use the Remove Duplicates feature of Excel 2010. If I remove them I could be removing data in columns B, C, D, etc that belong to the Unique ID. I just need the user to be told in Tab 1 that they DO have duplicates and I'll train the user how to research this and fix it.
The reason I want to look for duplicates in the entire Column A is because the list of Unique ID's will grow over time.
I have a table in excel range B5:M32 with the top two rows containing merged cells (B5:M6). I need to write a macro to copy data from cells B38:C38 into the above table.
I need the macro to first check to see if there is any data already entered i.e. check if the table is empty. If it is empty then paste the cells in the first cell (B7). If the table already has data entered i need to move to the last entry then move down one cell and paste the copied cells.
I have figures out the copying/pasting functions but am struggling with the part to check if the table is empty and moving down the table without using cell references.
I have a number of worksheets, each sheet is set up like a data entry form, at the bottom of which is a command button that takes them to the next worksheet based on a value in a cell. what i want to do is before it takes them to the next worksheet it checks a selection of cells, if any of which are blank it shows an error message and wont allow them to continue, better still the cell that is blank it high lights with a red border.
View 2 Replies View RelatedI have this code here, which run's fine, if I don't include the red line. The red code, should do the following: If the "D" Column and/or the "E" columns k-th cell have no value then it should increase the k by one. If theres a cell in "D" or in "E" (or in both of them) which have a value in it then it should start the "EXECUTING COMMANDS" part.
Code:
...
Dim ws As Worksheet
Set ws = wb.Sheets(1)
...
Do While ws.Range("A" & k).Value ""
[Code]...
But this won't start too after processing the do while line. How this .value command works.
Secondly, I am struggling to find a solution to something that in PHP, Java and javascript is painfully simple! That is - checking to see if an array contains no elements.
In PHP for example, you can do:
PHP Code:
$arr = array();echo empty($arr)."
";echo (sizeof($arr) == 0)."
";
This will produce the following output:
Code:
1
1
But ... I can't seem to find any equivalent of empty or sizeof in VBA.
see attached spreadsheet, if you copy cells from K3 to N92 into A3 to D92, data will be automatically shown up in columns F to I.
But there's a problem, whenever there's a cell contains 0% in col B-D, the corresponding cell in col G-I will be empty which affects the calculation therafter, can anyone help on this?
I need to check wether there is an empty cell in the Selection using the code below insted of using For Each c in the selection
Sub Test()
Range(Range("H3"),Range("H20").End(xlDown)).Select
If IsEmpty (Range(Range("H3"),Range("H20").End(xlDown))) Then
Msgbox "There is Empty Cell"
End If
how to check the column has any contents or not?
View 3 Replies View RelatedHow can I write code to test if a cell is blank? My code is using "isempty" but I keep type mismatch error because my cells are filled with formulas that make the cells blank. It only works if the cells are truly empty with no formulas.
View 8 Replies View RelatedIn need of a formula which checks rows 1 to 10 for empty cell. If all blank then value = true.
View 2 Replies View RelatedI'm not sure why I can't get this to work.
I need to abort the macro if the active cell is empty.
I've tried:
If ActiveCell.Value = "" Then Exit Sub
and
If IsEmpty(ActiveCell) Then Exit Sub
but neither work. I've found other solutions that test for a particular cell (A1 for example), but I need to be able to test the active cell, which may be any cell on the worksheet.