Check If A Table Is Empty Using VB
Feb 8, 2009
I have a table in excel range B5:M32 with the top two rows containing merged cells (B5:M6). I need to write a macro to copy data from cells B38:C38 into the above table.
I need the macro to first check to see if there is any data already entered i.e. check if the table is empty. If it is empty then paste the cells in the first cell (B7). If the table already has data entered i need to move to the last entry then move down one cell and paste the copied cells.
I have figures out the copying/pasting functions but am struggling with the part to check if the table is empty and moving down the table without using cell references.
View 3 Replies
ADVERTISEMENT
Aug 10, 2012
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
View 1 Replies
View Related
Mar 25, 2014
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx
Sheet1.doc
Sheet2.doc
View 2 Replies
View Related
Jun 14, 2009
I have a number of worksheets, each sheet is set up like a data entry form, at the bottom of which is a command button that takes them to the next worksheet based on a value in a cell. what i want to do is before it takes them to the next worksheet it checks a selection of cells, if any of which are blank it shows an error message and wont allow them to continue, better still the cell that is blank it high lights with a red border.
View 2 Replies
View Related
Aug 22, 2012
I have this code here, which run's fine, if I don't include the red line. The red code, should do the following: If the "D" Column and/or the "E" columns k-th cell have no value then it should increase the k by one. If theres a cell in "D" or in "E" (or in both of them) which have a value in it then it should start the "EXECUTING COMMANDS" part.
Code:
...
Dim ws As Worksheet
Set ws = wb.Sheets(1)
...
Do While ws.Range("A" & k).Value ""
[Code]...
But this won't start too after processing the do while line. How this .value command works.
View 7 Replies
View Related
Mar 1, 2014
Secondly, I am struggling to find a solution to something that in PHP, Java and javascript is painfully simple! That is - checking to see if an array contains no elements.
In PHP for example, you can do:
PHP Code:
$arr = array();echo empty($arr)."
";echo (sizeof($arr) == 0)."
";
This will produce the following output:
Code:
1
1
But ... I can't seem to find any equivalent of empty or sizeof in VBA.
View 4 Replies
View Related
Dec 7, 2006
see attached spreadsheet, if you copy cells from K3 to N92 into A3 to D92, data will be automatically shown up in columns F to I.
But there's a problem, whenever there's a cell contains 0% in col B-D, the corresponding cell in col G-I will be empty which affects the calculation therafter, can anyone help on this?
View 3 Replies
View Related
Feb 21, 2007
I need to check wether there is an empty cell in the Selection using the code below insted of using For Each c in the selection
Sub Test()
Range(Range("H3"),Range("H20").End(xlDown)).Select
If IsEmpty (Range(Range("H3"),Range("H20").End(xlDown))) Then
Msgbox "There is Empty Cell"
End If
View 3 Replies
View Related
Jan 22, 2008
how to check the column has any contents or not?
View 3 Replies
View Related
Jun 9, 2014
How can I write code to test if a cell is blank? My code is using "isempty" but I keep type mismatch error because my cells are filled with formulas that make the cells blank. It only works if the cells are truly empty with no formulas.
View 8 Replies
View Related
Jul 22, 2012
In need of a formula which checks rows 1 to 10 for empty cell. If all blank then value = true.
View 2 Replies
View Related
Jun 14, 2014
I'm not sure why I can't get this to work.
I need to abort the macro if the active cell is empty.
I've tried:
If ActiveCell.Value = "" Then Exit Sub
and
If IsEmpty(ActiveCell) Then Exit Sub
but neither work. I've found other solutions that test for a particular cell (A1 for example), but I need to be able to test the active cell, which may be any cell on the worksheet.
View 9 Replies
View Related
Jul 10, 2014
Trying to look at cell I2 to see if it's blank, has the current expiration date of 9/1/2014, or has an earlier expiration date.
I'm entering in K2 the following: IF(I2="","",IF(I2="9/1/2004","OWES","C")) At this point if the cell is blank it will show blank in K2 but if there is a date it always shows C.
View 3 Replies
View Related
Nov 3, 2008
I have an if statement as follows:
If IsEmpty(Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)))
Then
i did a select to make sure it was selecting the whole range I want and it works fine:
Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)).Select
Inside my range I can have cells with 0s in them and cells with nothing in them. What I would like my if statement to do is return true ONLY when ALL cells have nothing in them. At the moment, even if I have 0's in some cells, it's returning false.
View 9 Replies
View Related
Nov 10, 2006
I need to figure out how to tell if the sheet is empty with the exception of the header row that resides in Row 1. I have looked though the archieves, tried about 10 - 15 possible solutions, only for one thing or another to go wrong.
What this does is, if the data sheet is empty except the header, I need it to report that the user must add data. I have it checking row 1 column 1 but thats the header, and row 2 column 1 may or maynot contain data..
So if row two is empty then report that the sheet is empty, sans the header.
Sheet name = Data
Row 1 has header
Row 2 competely empty?
View 5 Replies
View Related
May 19, 2007
I dont know if after you search it will let you enter Xl. I had already search the threads and can't explain with out using XlUp.
Sheets("Input Data"). Range("D6:AO505", Worksheets("Input Data").Range("D510").End(xlUp)).Copy Sheets("Matrix").Range("B52")
But Sometimes there will be no data in the range and this code will copy the row above the array D5:AO5 and paste in the Matrix2 range B52 which is the catalist for a cascade of errors. The only thing I can think of is to use named ranges - But a this stage when the calculations fallover - well a little anoying
View 6 Replies
View Related
Jul 25, 2012
im having a little trouble writing a macro to :
check if a7:t7 is empty, if so delete a6:t7 and change cell colour of a6:t7 to 'no fill'
View 2 Replies
View Related
Jun 27, 2014
Column 'N' and 'O' will be used for inputting information and will never be hidden
Column 'E' through 'F' hold information, however the user will have hidden all but one of columns 'E' through 'F' before running macro
Once the user initiates the macro, the program will detect which column in 'E' through 'F' is not hidden
The macro will then start at row one of the unhidden column and loop down looking for the text 'Req' (not including ' )
If the loop finds 'Req' it will search in column 'N' of the same row for any data at all
If it finds data in column 'N' for that particular row, it will check column 'O' of that same row for any data at all
If it finds data in column 'O' also, then all 3 parameters have been met
The loop should continue checking for these 3 items through row 500
If the loop determines that for every 'Req' found in the unhidden row there is data in the corresponding column 'N' and 'O' a message will appear that says 'Checklist Complete"
Upon closing the message box, the file should save and then exit
If the loop determines that for every 'Req' found in the unhidden row, there is not always data present in column 'N' and 'O' the message box should appear and say 'Checklist Incomplete'
In the same message box, it should provide a list under 'Checklist Incomplete' that provides the text found in column 'D' for each row where it failed the test of having 'Req' in the unhidden row and data at all in column 'N' and 'O'
That last part will give the user a tool to see where they might have forgotton to enter data.
View 3 Replies
View Related
Dec 5, 2008
I have a spreadsheet that uses IF(C5>J5,(EDATE(C5,12)),(EDATE(J5,12)))__ IF(J9<D9,(D9-$N$1)) where N1 is current date. If C5 and J5 are empty how do I get it to ignore the formula and just leave the other cells blank?
View 3 Replies
View Related
Aug 13, 2008
The application reads in a file, whcih can have various formats. To check which format it's in, I plan to look for certain empty fields/ cells. I can successfully detect a group of empty cells by explicitly testing each one, but when I put them all in a range and test that, the check fails. So far I've reduced the problem to the following example code.
Sub check_clear()
Range("g1:g8").clear
If IsEmpty(Range("a1")) Then
Range("g2") = "A1 empty"
End If
If IsEmpty(Range("b1")) Then
Range("g3") = "B1 empty"
End If
If IsEmpty(Range("c1")) Then
Range("g4") = "C1 empty"
End If
If IsEmpty(Range("d1")) Then
Range("g5") = "D1 empty"
End If..............
The result is that each individual cell check results in the relevant "XX empty" message. However, the test that the range of multiple cells is empty never produces a result. I'd really like to understand the underlying reason - as well as find out how to perform an isEmpty test on a range. I'm looking more for guidance and insight than a canned solution
View 3 Replies
View Related
Jul 18, 2014
I've got a list and I need to check if the adjacent cells for a column are empty or not, and if both are empty then format to a certain color. I have a solution but don't know how to implement it into a format fit for conditional formatting.
I have this in the new rule section of conditional formatting
=IF(AND(ISBLANK(OFFSET(I4,0,-1)),(ISBLANK(OFFSET(I4,0,1))),(ISBLANK(I4)=FALSE)),TRUE,FALSE)
If conditional formatting would allow it I would simply change I4 to the entire range, I am very much confused as to how to format this cell to work with conditional formatting. (I4 is the first cell in the list)
Something else is that if I change I4 to I5 or something then moves all the highlighted cells around, and to top it off the first few cells which should obviously be highlighted aren't, even though the rest of the cells which should be highlighted are.
View 7 Replies
View Related
Aug 3, 2012
I am using a Uderform in order to check if some cells in several columns are higher or lower than values I set in my textboxes.
However, I think I am having a mistake in my code (it runs but doesnt return the correct informations) as I have blank cells in certain columns.
Concretely I am giving 1 point if the criteria is valid (if for example the value in the cell is <= 1) but some of these criteria are 1 when they should be 0.
As I said it runs but I need to add a fix for empty cells / blank cells and if possible N/A error cells in this so that the code gives 0 to the criteria and moves to the next column (next select case)..
View 2 Replies
View Related
Oct 23, 2013
I have an excel document with hundreds of columns. Each column should not be empty; they must have at least one value. Right now I'm applying a filter and going through each column one by one to make sure that it is not empty. How can I perform this check without having to go through each column one by one?
View 6 Replies
View Related
May 25, 2012
I have this table and I want to delete all the table rows that are empty. The problem comes in when I am trying to delete the "Table Row" and not the excel entire row. There is data next to my table and I don't wanna mess it up.
This is the code I managed to put togeter
Code:
Sub Delete_Empty_Rows_Table()
Dim i As Variant
Dim varWorkbook As Workbook
For Each i In varWorkbook
Set i = ListObjects.ListRows.Count
[code].....
View 3 Replies
View Related
Jan 28, 2014
I am writing regarding the Pivot table creation with data which contains empty rows.
Recently, I work on a project with a data which contains empty rows. I will attach the file for sample to see what sort of data contains my sheet.
As you can see the data is divided according to some criteria, and it is constantly updated by users. sometimes a new criteria is added at the end of the sheet, that is why I need to create a pivot table, to be able to just changing Source, to update the table and manipulate table in order to get desired results, but I can't remove these empty rows rom the data as far as some unexperienced users have to fill the information and it is more comfortable to have the data separated from each other for them.
However, when creating the Pivot table on this type of data, the pivot table will include the blanks Row Labels there.
View 4 Replies
View Related
Feb 16, 2009
In my Pivot table I have 3 fields in the "header - section" of each row
There is also the possibilty in the Page section to choose between subjects (eg physics, chemistry, biology etc) When all rows are displayed there are 68 in total
When I choose Physics there are about 30 customers that have a value in 1 of the rows. Excel shows 30 rows, but I would like all 68 row to be shown, because these are the values that are important to me. I have tried a lot of settings in the pivot table but can't find the correct 1.
What happens a lot is the the rows are "multiplied", meaning that the 1st row header has every combination of the 2nd and 3rd and so one. Which setting is needed to get what I want?
View 4 Replies
View Related
Mar 19, 2014
It works to add a new row to an existing table and adding data. This doesn't work for me because i need the tables to stay a certain number of rows, probably about 10. I need it to add data to the first blank row of the table instead.
View 1 Replies
View Related
Jun 9, 2014
No matter what I do the data entered into the UserForm always goes to the next row that isnt formatted as a table instead of into the the next empty row within the table.
I have tried:
Code:
With Sheet2.Range("B1").EntireColumn
NextRow = .Find(What:="*", _
After:=.Cells(1), _
LookIn:=xlFormulas, _
Lookat:=xlPart, _
SearchDirection:=xlPrevious, _
MatchCase:=False).Row + 1
End With
and
Code:
Private Sub CommandButton1_Click()
Dim LastRow As Long
Dim i As Integer, response As Integer
With Sheet1
LastRow = .Cells(.Rows.Count, "B").End(xlUp).Row + 1
[Code] .......
and
Code:
Dim LastRow as LongLastRow = Cells.Find("*",SearchOrder:=xlByRows,SearchDirection:=xlPrevious).Row
and
Code:
Private Sub CommandButton1_Click()
Dim LastRow As Object
Set LastRow = Sheet1.Range("a65536").End(xlUp)
View 1 Replies
View Related
Sep 2, 2006
I am using a Pivot Table to sort, combine, and sum data. After this is complete I want to copy the pivot table and paste it (values only) to another worksheet and use the data again. The problem is the pivot table does not fill in all the blanks and leaves empty rows. The there a way to force the pivot table to fill in the labels?
View 6 Replies
View Related
Jul 6, 2009
I got a cell value and I want to check if it exists in another table. Problem is the second table splits the value and moves the last 2 chars on the right into the next column like this :
4112JJPV
4112JJ PV
Ive tried using vlookup with a LEFT(cell1,6)
and a RIGHT(cell1,2) in place of other values but im having no luck.
I need to check for the first 6 characters then if the next column the value is equal to the last 2 character on the right I would like a True value returned.
I eve tried IF(AND(COUNTIF( but im just getting errors ect
View 8 Replies
View Related
