Check For Value In Multiple Columns

Nov 26, 2007

I would like to count al the rows where in certain columns there are certain values.

For example:

This works fine. However, I would like to look in columns N2:W4000 as well if in that specific row value x is present. This gives:


This gives a #value error. Is it not possible to look in multiple columns at one time with sumproduct?

View 9 Replies


Formula To Look At Data In Multiple Columns And Check For A Match

Nov 15, 2012

Any formula that can look at the data in multiple columns and check for a match - returning a value such as YES or NO. Below is an example of my sheet.



[Code] ..........

Basically the formula would be in Column G and would look at B, D, & F to see if they match or not. In the example above - row two - they all match. So a True, 1, or Text option such as YES would be great. Same as row 3 only you can see they are different.

View 5 Replies View Related

Determine That Multiple Columns Are Empty Or Full Without Doing Manual Check?

Oct 23, 2013

I have an excel document with hundreds of columns. Each column should not be empty; they must have at least one value. Right now I'm applying a filter and going through each column one by one to make sure that it is not empty. How can I perform this check without having to go through each column one by one?

View 6 Replies View Related

Check Data For Changes In Multiple Columns And If Changed Copy To Another Sheet

Mar 8, 2014

This is my basic setup, each piece of equipment will have more than one routine to be performed:

Equipment Type

To Be Performed
Last Performed
Performed By
Next Due Date

[Code] ..........

I want to track changes on "Last Performed" and "Performed By" and, if changed, copy both values to a separate "log" sheet. In total, there could be up to 10 routines for each peice of equipment. That means I would need to track 20 columns for changes. I would like this check to be done on save because that ensures that the user is satisfied with their changes and keeps the log from being flooded. And lastly, it needs stored in the log sheet in a way that I can identify which piece of equipment it was for and which routine was done.

View 1 Replies View Related

Check If Columns Are Grouped (VBA)

Dec 5, 2008

How can I check (using VBA) if 2 columns (F and G) are already grouped.

View 7 Replies View Related

Check If Data Is The Same In 2 Columns

Jun 14, 2009

I'm trying to check if data in column u is in column g if so highliglt the
Cell row in column G

Sub Macro1()
With Selection.Interior
.Pattern = xlNone
.TintAndShade = 0
.PatternTintAndShade = 0
End With

rlc = LastCell(ActiveSheet).Address(False, False)
lr = ActiveCell.Row
lc = ActiveCell.Column.............

View 9 Replies View Related

Check 4 Different Columns That Have Dimensions

Nov 16, 2009

I have a worksheet with many dimensions and I would like to have a formula or macro to do the following: I need to check 4 different columns that have dimensions and calculate the best combinations in order to fit within the least amount of 96 inch boards.

View 9 Replies View Related

Check Relation Between Columns

Nov 29, 2006

I want to check relations between 2 columns.

1 2
1 3
1 4
4 1
4 5
4 3
2 1
2 3

In case that I have relation 1->2, I what to check do I have relation 2->1.

Could you propose me a formula or script to make this check.

View 3 Replies View Related

Check Columns For Blanks

Aug 22, 2007

Is there a way that when looking at selected cells you can check their formatting?

I am trying to write some vba code to check for blank spaces in a number of columns (doing it one column at a time at the moment).

However, the current code im using messes up as at the bottom of the data there is a Total: column which is formatted in blue. Total: is only in the A column so the code I have won't work for other columns when no data is in them..

If Selection.Cells.Row > 6 Then ' there's some data in the sheet since we didn't hit the header row - now look for blank currency cells next to occupied lessee prospect cell
While Selection.Cells.Row > 6
If Selection.Value = "" Then ' there's a blank entry in the sheet - add error to 'passed' string
passed = "Blank spaces in ACC column " & Selection.Cells.Column & Selection.Cells.Row & " - please correct." & vbCrLf
End If
Selection.Cells.Offset(-1, 0).Select
End If

If there isnt any data at all up to the header row but blank rows between the header and the bottom total (blue) row it doesnt work.. how can i get around this? I thought perhaps checking that it isn't blank OR the total row somehow by checking the color (ie formatting)?

View 9 Replies View Related

Check Two Columns At The Same Time And Return The Value In The 3rd

Aug 6, 2009

Is there a good way to check two columns at the same time and return the value in the 3rd?


12 0.07 8
12 0.37 10
12 0.82 12
12 1.30 15
12 3.90 22
12 8.00 28
12 15.00 35

I look for 12 in the first column with vlookup but I need to also look for a figure in the 2nd column which is greater than my figure. So say I want 12 & 6.0 I would want the formula result to be 28 because the nearest larger number in the table column 2 is 8.00.

View 2 Replies View Related

Counting Columns Of Check Boxes

Jul 25, 2008

I am using Excel 2007 on Windows XP. I have written up a questionnaire that allows the user to simply check boxes in the cells. My problem is coming up with a formula to count the number of boxes have been checked. I tried several count formulas without any luck. I think one of the problems is that when I highlight the cells with these check boxes it doesn't actually show in data in the fx line.

View 9 Replies View Related

Match Columns To Check If Condition Met

Aug 29, 2007

If you open the attachment.. then you will see that Column A has all the names and Column B has it's Value.. likewise.. Column D has all the names and Column C has it's values...I'm trying to first match the names from Column A to Column D and then see if Column B matches to Column C..

View 8 Replies View Related

Excel Macro To Check Order Of Columns?

Apr 12, 2014

As an part of QA activity

1. first I export data and directly paste in the "RAWDATA" Sheet.
2.There are 50 columns and each has header like Clientname,date,Id,campaign,websitename,frequecncy etc.
3.Exported data does not have same order when I paste data in excel I check manually if orders are in correct or not?which takes my long time to review/manually check

Using macro or something else to review the order and if any discrepancy then raise error? Need Excel to check order of columns ?

View 1 Replies View Related

Userform VBA To Check 2 Columns (A And B) For Duplicate Entries

Apr 23, 2014

I have a userform that I use for data entry with lots of combo boxes, list boxes and text boxes

One thing i haven't cracked yet is to check for duplicates against two matching fields

If a user (for example) enters 'SAB' (which will be stored in column A) and then 'UK' (which will be stored in column B) and there is already an exact match for both, then I need to inform the user that a matching record already exists

The following is OK: (the dots below are meant to illustrate spaces between the columns!!)

BUT, if a user then tries to enter:


I need my userform to register a duplicate entry.

My sub routine is detailed below : .....

View 3 Replies View Related

Check To See If Dates Match In Two Separate Columns?

Apr 6, 2013

what i am trying to do is look at an entire column, and see if that same date exists in the other Activity tab, if the dates match, then show the activity

here is the formula i am using, =IF($A9=Activity!$A2,Activity!$B2,"No Activity")

my problem is that i am only able to isolate one of the cells,, how do i check the entire column?

in other words, if i select two weeks, those two weeks of activity will show, if i select all weeks, all of the weeks activity will show, right now i can only get one of the weeks

my data looks like the following

1st tab
1/8/2013 - 1/14/2013
1/29/2013 - 2/4/2013
1/22/2013 - 1/28/2013


View 3 Replies View Related

Check To See If Cell Address Is Within Columns Of A Range

Nov 12, 2013

I have a named range BGl (G1:R1). I would like to see if a cell address ($U$6) is within the columns of that range. I need a function to give me a true or false based on changing cell addresses.

View 5 Replies View Related

Check To Match Columns Separate Sheets

Mar 20, 2007

I have a column on sheet 1 which contains 200 lines with a unique number in each row (account codes). I have another sheet (sheet 2) which contains the same column. sometimes an extra row for an extra account code is added to the col in sheet 1. I need to make sure that the col I have in sheet 2 always has exactly the same as the col in sheet one, where the same account code should never be repeated. I am currently trying to setup a sheet where I keep all the checks and controls.

View 7 Replies View Related

Cross Check Two Different Columns And Output Common Entries?

Jul 12, 2012

So I have two columns, in column a, i have a list of zip codes and in column b i have a larger list of zip codes. is it possible to find what zip codes in column a appear in column b, and then output those zips?

View 1 Replies View Related

Excel 2010 :: Unable To Use VBA Check Box With Protected Sheet / Columns?

Jul 9, 2014

I need to make a excel costing model to calculate various products prices. I am using Excel 2010.

I have many products and do not need all of them displaying at the same time, therefor I inserted a Checkbox (ActiveX Control) that hides my columns that I do not need. I did that by inserting the following and it works fine :


The problem is I now need to lock certain cells so that they can remain fixed and the recipe cannot change.

Once locked my checkbox no longer works and I get the following error :

"Run-time error '1004': Unable to set hidden property of the range class"...

View 1 Replies View Related

Check If Cell Is Multiple Of Another

Nov 18, 2008

I want to check if the value of a cell is the multiple of another

for example cell A1 is 6
and cell B1 is 2

This is valid because 2*3=6 but if cell A1 was 5 then it should display that its not valid!

View 2 Replies View Related

Countif (check The Data For The Following Conditions, If It Meets The Crirteria Then Place A 1 In Columns)

Aug 22, 2009

the traditional count if statement doesnt return what I need. I have an array of values that need to be checked.

Column: A B C D E
Data: .25 .49 .18 (Criteria 1 Result) (Criteria 2 Result)

What I need to do is check the data for the following conditions and if it meets the crirteria I need excel to place a 1 in column D or E.

Criteria 1
If any of the coulmn data contains a value less than .5 I need a 1 placed in column D

Criteria 2
If any of the column data contains a value greater than .5 but less than 1.0, I need a 1 placed in Column E. I tried using an IF/ Count If statement, but cant seem to get it to return the result I need.

View 5 Replies View Related

Nested If's Or How To Check Multiple Conditions In A Row

Jul 14, 2009

I have the data in this form


The output should check two conditions. If all three columns are "Y" then it should return value "Y". If any two columns are "Y" then it should return value "Y". or else it should return "N". Then the output should look like this.... The output column is colored in Red..........

View 5 Replies View Related

Inserting Multiple Check Boxes

Feb 22, 2010

Is there a way to a mass insert of Check Boxes without the cell link all being the same cell? I have a huge list of items that I want to put a check box next to each one. This way when my warehouse people check it off in the sheet one of the columns will read "Available".

Problem is when I put the first box in and cell link it to E4, and then copy and paste it, all the boxes toggle based on one another. Otherwise I have to put in 584 check boxes. Solutions or other recommendations are gladly welcome.

Also, is "True/False" the only available "response" when using Check boxes? (I Know I can write an equation based on the true false, but I am just curious)

View 3 Replies View Related

Range Check Across Multiple Sheets?

Feb 7, 2012

If I want to check a range of cells how would I modify this to do that?

Single Cell (working):


Range (not working):


View 2 Replies View Related

How To Check Multiple Cells Have Same String

Jul 9, 2013

I want to check if cells C1, D1 and E1 contain the same name. For example if the cells all contain the 'Joe Bloggs' (or whatever the name variable happens to be) then cell F1 should say "Yes", else "No".

View 1 Replies View Related

Check Multiple Conditions In Loop

Oct 22, 2009

I want to vary a for next loop, depending on the value of a variable (y). Is there a way of doing this without repeating code as in the example?

If y = 1 Then
For x = 1 To 100
' lengthy code changes Cells(x,1) characteristics
Next x
ElseIf y = 2 Then
For x = 101 To 200
'lengthy code changes Cells(x,1) characteristics
Next x
ElseIf y = 3 Then
For x = 201 To 300
'lengthy code changes Cells(x,1) characteristics
Next x
End If

View 9 Replies View Related

VBA Code. Check Multiple Conditions

Jul 22, 2007

I want to create a user form in excel that auto calcs the discount depending on customer type and no. of books purchased. There are two types of customerís one individual and the other schools, library etc. The discounts are below

More than 50 books - 30%
25 - 49 - 20%
15 - 24 - 15%
5 - 14 - 10%
<5 - 5%

>25 - 25%
5 - 24 - 15%
<5 - 0%

I have created a form with option and text boxes to capture data but am really struggling with this as in my head I understand a set calculation will need to take place once relevant conditions are met but am really struggling to put it into code (yes I am new to this).

View 2 Replies View Related

Excel 2007 :: Automatically Transfer Columns From One Worksheet To Another In Multiple Columns?

May 4, 2013

I would like to take the data from worksheet1 and put into worksheet2 but limit the length of a list (the real spread sheet has over 100 rows and i would like them in 4 sets of 25 versus the example I provided). Is there an array or macro that would make this work (keeping the formatting)..

Excel 2007


View 9 Replies View Related

How To Combine Multiple Columns Into Long List Of Results In 2 Final Columns

Oct 15, 2013

I have a need to combine multiple columns into a long list of results in 2 final columns. Here is my example...

Current layout with varying number of data points per row...

ColumnA | ColumnB | ColumnC | ColumnD | etc...
example1 | Test1 | Test2 | Test3 | Test4
example2 | Option1 | Option2
example3 | Number1 | Number2 | Number3 | Number4 | Number5

Desired Result

ColumnA | ColumnB
example1 | Test1
example1 | Test2
example1 | Test3
example1 | Test4
example2 | Option1
example2 | Option2
example3 | Number1
example3 | Number2

and so on and on and on until all rows have been filled in down the file...

Is this possible?

View 4 Replies View Related

Vlookup Using Multiple Criteria To Check Values

Jan 15, 2014

Have spent ages on this to no avail. Need the attached sheet to verfiy the values in the "Reconciliation" are correct when referencing the "Prices" sheet. I need column F (Reconciliation sheet) to lookup the "Code" in column B in the "Prices" sheet and then further look up the "Payment Frequency" (column D in the Reconciliation sheet) in the "Prices" sheet to verify that the price is correct.

Due to slight decimal point issues, if the value has a greater than 0.02 difference then display "ERROR" otherwise 0.

View 6 Replies View Related

Copyrights 2005-15, All rights reserved