How can I write code to test if a cell is blank? My code is using "isempty" but I keep type mismatch error because my cells are filled with formulas that make the cells blank. It only works if the cells are truly empty with no formulas.
View 8 RepliesI am using a Uderform in order to check if some cells in several columns are higher or lower than values I set in my textboxes.
However, I think I am having a mistake in my code (it runs but doesnt return the correct informations) as I have blank cells in certain columns.
Concretely I am giving 1 point if the criteria is valid (if for example the value in the cell is <= 1) but some of these criteria are 1 when they should be 0.
As I said it runs but I need to add a fix for empty cells / blank cells and if possible N/A error cells in this so that the code gives 0 to the criteria and moves to the next column (next select case)..
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
see attached spreadsheet, if you copy cells from K3 to N92 into A3 to D92, data will be automatically shown up in columns F to I.
But there's a problem, whenever there's a cell contains 0% in col B-D, the corresponding cell in col G-I will be empty which affects the calculation therafter, can anyone help on this?
I need to check wether there is an empty cell in the Selection using the code below insted of using For Each c in the selection
Sub Test()
Range(Range("H3"),Range("H20").End(xlDown)).Select
If IsEmpty (Range(Range("H3"),Range("H20").End(xlDown))) Then
Msgbox "There is Empty Cell"
End If
In need of a formula which checks rows 1 to 10 for empty cell. If all blank then value = true.
View 2 Replies View RelatedI'm not sure why I can't get this to work.
I need to abort the macro if the active cell is empty.
I've tried:
If ActiveCell.Value = "" Then Exit Sub
and
If IsEmpty(ActiveCell) Then Exit Sub
but neither work. I've found other solutions that test for a particular cell (A1 for example), but I need to be able to test the active cell, which may be any cell on the worksheet.
Trying to look at cell I2 to see if it's blank, has the current expiration date of 9/1/2014, or has an earlier expiration date.
I'm entering in K2 the following: IF(I2="","",IF(I2="9/1/2004","OWES","C")) At this point if the cell is blank it will show blank in K2 but if there is a date it always shows C.
I dont know if after you search it will let you enter Xl. I had already search the threads and can't explain with out using XlUp.
Sheets("Input Data"). Range("D6:AO505", Worksheets("Input Data").Range("D510").End(xlUp)).Copy Sheets("Matrix").Range("B52")
But Sometimes there will be no data in the range and this code will copy the row above the array D5:AO5 and paste in the Matrix2 range B52 which is the catalist for a cascade of errors. The only thing I can think of is to use named ranges - But a this stage when the calculations fallover - well a little anoying
I want to add an IF statement to my macro that will run only if a cell on the worksheet is not blank (empty). I know how to use the if statements but can't figure out how to test a cell for contents.
View 4 Replies View RelatedI'm testing to see if a cell has nothing in it, and if that is true then it will execute the code. My problem is that even though the cell is blank the field does have a drop down list (list validation set for that field) below is the code i used, but doesn't work.
If Range("b3").Value = " " Then
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View RelatedI have a problem with finding the right function. My goal is to have the following function...
The cell D1 has the following function: [=IF(B1<=C1;"YES";"NO")] But I would like to have the cell D1 to be left blank, if the cell A1 is blank.
For Excel 2000:
In worksheet A, there is a column of numbers that can be 0 or not zero.
In worksheet B, there is a column of cells that determines if a corresponding cell in worksheet A is zero or not.
'As an example, for cell 'B!C6
=If( 'A!B52=0,"",'A!B52)
The column in worksheet B is used in a chart.
The chart settings are:
Tools | Options | Chart | Active Chart- Plot empty cells as: Not plotted
The chart is not treating "" as EMPTY, and therefore is not presenting correctly.
How would I set the value of cell 'B!C6 to EMPTY (or null, or blank, or whatever Excel calls it) using an IF statement, such that 'B!C6 would evaluate to EMPTY, and be ignored by the chart?
Would this be any different in Excel 2003?
sumif problem but it wont work with a countif or average if.
Column A has various names and Column B has amounts, what I need is to count the number of occurances "John Smith" has an amount in Column B. The previous formula I tried was
=sumif(A:A,"John Smith",B:B) but with either countif or averageif it errors too many arguements.
I wasn't sure if Dcount or an array would be suitable but have not used them before.
Pivot tables I'm sure will be the future with this but haven't got to the foot of that mountain yet.
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors.
Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
I am using a IF(ISNA(Vlookup##,##,##)),"",(Vlookup##,##,##)) function, in order to remove N/A errors. Is there anyway to convert the "" values to back to an empty cell without anything in it (i.e not text "", but empty as it was originally). I find that the file sizes are very large, when using this function, as data (although blank) is stored in each cell (i know this, because if I use cntr+arrow, it sees it as data, and not an empty area). I don't want to manually go through each cell and delete them as there is quite a bit of data (10000 rows , 2 columns, 30 tabs)
View 2 Replies View Relatedwith some basic code. I want to check the activecell, if it's blank then copy the contents from the cell above, if it's not blank, leave it & go down to the next cell & repeat until last row.
View 7 Replies View RelatedLooking forward VBA coding for:
If input is entered into column C (range C2:C100), then row cells for columns D, E ,F, H or I must NOT be blank upon save.
Could be that one or more of these row cells are left blank by mistake.
An error msg pops up upon attempting to save, stops the save and colors each cell yellow that needs info entered into.
Using Excel 2010.
I have a table in excel range B5:M32 with the top two rows containing merged cells (B5:M6). I need to write a macro to copy data from cells B38:C38 into the above table.
I need the macro to first check to see if there is any data already entered i.e. check if the table is empty. If it is empty then paste the cells in the first cell (B7). If the table already has data entered i need to move to the last entry then move down one cell and paste the copied cells.
I have figures out the copying/pasting functions but am struggling with the part to check if the table is empty and moving down the table without using cell references.
I have a number of worksheets, each sheet is set up like a data entry form, at the bottom of which is a command button that takes them to the next worksheet based on a value in a cell. what i want to do is before it takes them to the next worksheet it checks a selection of cells, if any of which are blank it shows an error message and wont allow them to continue, better still the cell that is blank it high lights with a red border.
View 2 Replies View RelatedI have this code here, which run's fine, if I don't include the red line. The red code, should do the following: If the "D" Column and/or the "E" columns k-th cell have no value then it should increase the k by one. If theres a cell in "D" or in "E" (or in both of them) which have a value in it then it should start the "EXECUTING COMMANDS" part.
Code:
...
Dim ws As Worksheet
Set ws = wb.Sheets(1)
...
Do While ws.Range("A" & k).Value ""
[Code]...
But this won't start too after processing the do while line. How this .value command works.
Secondly, I am struggling to find a solution to something that in PHP, Java and javascript is painfully simple! That is - checking to see if an array contains no elements.
In PHP for example, you can do:
PHP Code:
$arr = array();echo empty($arr)."
";echo (sizeof($arr) == 0)."
";
This will produce the following output:
Code:
1
1
But ... I can't seem to find any equivalent of empty or sizeof in VBA.
how to check the column has any contents or not?
View 3 Replies View RelatedI have an if statement as follows:
If IsEmpty(Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)))
Then
i did a select to make sure it was selecting the whole range I want and it works fine:
Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)).Select
Inside my range I can have cells with 0s in them and cells with nothing in them. What I would like my if statement to do is return true ONLY when ALL cells have nothing in them. At the moment, even if I have 0's in some cells, it's returning false.
I need to figure out how to tell if the sheet is empty with the exception of the header row that resides in Row 1. I have looked though the archieves, tried about 10 - 15 possible solutions, only for one thing or another to go wrong.
What this does is, if the data sheet is empty except the header, I need it to report that the user must add data. I have it checking row 1 column 1 but thats the header, and row 2 column 1 may or maynot contain data..
So if row two is empty then report that the sheet is empty, sans the header.
Sheet name = Data
Row 1 has header
Row 2 competely empty?
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
im having a little trouble writing a macro to :
check if a7:t7 is empty, if so delete a6:t7 and change cell colour of a6:t7 to 'no fill'
Column 'N' and 'O' will be used for inputting information and will never be hidden
Column 'E' through 'F' hold information, however the user will have hidden all but one of columns 'E' through 'F' before running macro
Once the user initiates the macro, the program will detect which column in 'E' through 'F' is not hidden
The macro will then start at row one of the unhidden column and loop down looking for the text 'Req' (not including ' )
If the loop finds 'Req' it will search in column 'N' of the same row for any data at all
If it finds data in column 'N' for that particular row, it will check column 'O' of that same row for any data at all
If it finds data in column 'O' also, then all 3 parameters have been met
The loop should continue checking for these 3 items through row 500
If the loop determines that for every 'Req' found in the unhidden row there is data in the corresponding column 'N' and 'O' a message will appear that says 'Checklist Complete"
Upon closing the message box, the file should save and then exit
If the loop determines that for every 'Req' found in the unhidden row, there is not always data present in column 'N' and 'O' the message box should appear and say 'Checklist Incomplete'
In the same message box, it should provide a list under 'Checklist Incomplete' that provides the text found in column 'D' for each row where it failed the test of having 'Req' in the unhidden row and data at all in column 'N' and 'O'
That last part will give the user a tool to see where they might have forgotton to enter data.
I have a spreadsheet that uses IF(C5>J5,(EDATE(C5,12)),(EDATE(J5,12)))__ IF(J9<D9,(D9-$N$1)) where N1 is current date. If C5 and J5 are empty how do I get it to ignore the formula and just leave the other cells blank?
View 3 Replies View Related