Dimensional Weight Formula II
Mar 18, 2009calculate dimensional weight (below).
View 3 Replies
ADVERTISEMENT
Dimensional Weight Formula
Mar 17, 2009I have attached a sheet that contains a pretty simple formula that helps me figure out the dimensional weight of a shipment. It is just a simple vlookup that returns the proper rate (Column H) depending on DIM Weight and Zone. It works great.
The issue I'm running into is with various exceptions that I need to put into the formula. The criterias that I need to put into the rate formula (Column H) are:
1-If the one of the Length (Column A), Width (Column B), and Height (Column C) is greater than 60 I need to add 7.50 to the the returned lookup value in Column H.
2-The second longest side the Length (Column A), Width (Column B), and Height (Column C) is greater than 30 I need to add 7.50 to the the returned lookup value in Column H.
3-If the grith (2x Column C + 2x Column B) is greater than 130 I need to add 45 to the the returned lookup value in Column H.
I'm working with a few IF formulas but I can't seem to get all of them to work at the same time. Does anyone have any thoughts?
Creating A 2-dimensional Array From A 1-dimensional List
Nov 27, 2008I've been a lurker on this forum for a long while and it's always been able to provide me with lots of excel tips, and for that I am grateful! But this time I have a question that I can't find the answer to here, or anywhere else on the web after a few hours of looking. As a note, I'm not very experienced with Excel, probably somewhere between novice and intermediate.
What I need to create is a 2-dimensional array of data. The vertical (y-axis) are the tools, and the horizontal (x-axis) are the jobs. Where the y-axis and the x-axis intersect, will be the quantity of tools needed for that specific job. There are almost 1500 tools, and 100 jobs.
IF Formula- Comparing Height Vs Weight Standards Of Individuals
Jan 12, 2010i am trying to use the following formula in a cell. it is comparing height vs weight standards of individuals....
View 9 Replies View RelatedBox Weight Average
Feb 14, 2013A
B
C
D
E
9
et Boxes
Gross Weight
Ice Weight
Box Weight
Net Weight
10
Box 1
60
5.5
4.5
50
d10=IF(B10>=1,4.5,0)
[Code] .......
Weight Chart
Aug 31, 2007I am trying to create a weight chart, which works in stones, pounds and ounces. My first query is that each time I enter the weight in for each day, I need it to deduct 1ib 4oz from the weight I enter. At present I have seperate columns for stones, pounds and ounces. However, if I try to do a simple lbs minus 4 it doesn't work, because sometimes the pounds are less than four - so instead of taking the stone column down by one and then deducting the remaining pounds, it just puts the pounds columns to -3 or similar.
Also, I would like my table to work out weight lost over a period of time - so, I have my starting weight at the top and then I want my most recent weight to be taken from the starting weight, leaving weight lost - I can't get this to work either. Is there a way to make it so that the calculation uses the most recent weight entry and does so automatically?
If anyone has any solutions to these queries, I would be very grateful...as I have to caculate this for a number of people and it would be much quicker if it did it all automatically upon entering the most recent weight.
How To Weight An Average
Nov 21, 2008I have some aged data, as follows
325days - $225
20days - $2,725
16days - $27,250
11days - $8,175
Now, if I just take the average number of days ((365 + 20 + 16 + 11) /4) I get 93.0days
However, I want to high value days to carry more weight, than the lower value days.
I gave each set of data a weighted score by dividing the value by the total value, i.e.
$225 / $38,375 = 0.006
$2725 / $38,375 = 0.071
$27,250 / $38375 = 0.710
$8175 / $38375 = 0.213
Automating % Weight Calculation
Mar 16, 2008I have 1 spreadsheet in which I need to calculate the % weight of some numbers. Columns A to G have data I do not need for the calculation.
Column H has the numbers of whose % weight I need to calculate. The problem is that the no. of rows containing the numbers can change from week to week and I am trying to automate the calculation of the % weights.
So I want try to use column G (as a reference) (like go at the bottom of it so I can know how many rows of numbers there are) and then calculate the % weights.
Adding Weight Major And Minor
Sep 15, 2014I have two columns. One with the major weight(pounds and one with minor with ounces. The first column would have a 1 the second 8 for 1 lb 8 ounces which I need to combine to say 1.5 Every way I do it it is coming up with 10.5.
View 5 Replies View RelatedTracking Weight Loss In Excel
Aug 2, 2008How do I track my total weight loss in excel? Here is an example of what I am trying to do.
8/1/2008 228lbs
8/2/2008 225lbs
8/3/2008 223lbs
Total 5lbs
I would like use a formula that would subtract my absolute weight loss total day by day in August. Basically, I want the total "cell" to equate to my total weight loss in August. For Example after 8/3/08 the "total cell" should equate to 5 lbs. What formula do I use to do this?
Calculate The Total Weight Of Any Letter
Oct 18, 2009I cut alphabet letters out of MDF. I need to calculate the total weight of any letter.
I have a program that will give me the area of any shape. In the picture below I have started with the letter “A”. B7 is the over all area. D7 is the small triangle. G7 is the total area minus the triangle D7. H7 is the thickness and I7 is the total volume.
The weight of my MDF I have set at is 850kg cubic meter. That’s set in A3.
I need the total weight of the letter in J7 to be in grams.
The idea is, I put in the areas and set the thickness and it gives me the total weight.
Weight Watchers Points Tracker
Apr 15, 2008I'm trying to make a points calculator and tracker for a diet.
I have the forumla from wikipedia and it calculates the point now I want to record the date, food, meal & Points on a second sheet.
I enter that data in
E1 =Date
E2 = Point (calculated)
E3 = Meal (Breakfast, Lunch, Dinner Etc)
E4 Food (text)
E6 Calories (number)
E7 Saturated Fat (number)
I want to add a button that records this data to another work sheet and clears the inputs I have made.
The following Date should be carried across
E1, E2, E3 & E4 into A2, B2, C2 & D2 (or the next available row)
The following Cells should be cleared (E1, E3, E4, E6 & E7)
Sum And Weight Average Variable Data
Dec 13, 2008Hi there, been using this for a number of years now, but never had to post a question - I guess most things are already answered - but this one is a bit more tricky.
I want to calculate a totals and a weighted average based on months from a data set that has duplicate ID's and variable data (attached example).
I would like to calculate the total tonnes by month and the average grade of those tonnes. Using the 'month ID table' as a reference to the 'Raw Data table'.
Is this possible using if and vlookup functions or will require a higher level of programming knowledge?
VBA Stuff- Weight Watcher Spreadsheet
Nov 4, 2008I have a Weight Watcher spreadsheet. I enter the Calories, Fat and Fiber and I get the # of points for that food. Then I keep put those points into the lower part of the spreadsheet where I track what I eat, and Excel does my simple math for me. What I want to do is keep a list of my foods, and their point value in my spreadsheet. I would like to be able to put the food name in Cell A1, the WW points in BI, and then be able to click a button with a macro that takes those two pieces of data and add them to bottom of my food list. I don't have a food list yet, I would assume I can just put it on sheet 2. I then want to be able to use lists in my cells to choose the food in the future. I need to be reminded how to make "dynamic named ranges. Today, I just need to know how to write the macro to copy and paste those two cells in the first open row at the bottom of my food list.
View 9 Replies View RelatedExponential Weight Volatility Average
Jul 25, 2006to write a function that will exponentially weight a series of returns by a certain decay factor.
I have excel spreadsheets that can do this over several columns, like this
series of returns... rtns squared
2.50% =2.50%*2.50%
3.50% =3.50%*3.50%
5.00% =5.00%*5.00%
1.01% =1.01%*1.01%
0.75% =0.75%*0.75%
4.01% =4.01%*4.01%
-2.78% =-2.78%*-2.78%
Unable To Set Weight Property Of Border Class
Apr 22, 2010I am using the following few lines of code:
Code:
Range("A3:L" & ActiveCell.Offset(1, 0).Row).Select
With Selection
.Borders(xlEdgeLeft).Weight = xlMedium
.Borders(xlEdgeTop).Weight = xlMedium
.Borders(xlEdgeBottom).Weight = xlMedium
.Borders(xlEdgeRight).Weight = xlMedium
.Borders(xlInsideVertical).Weight = xlThin
.Borders(xlInsideHorizontal).Weight = xlThin
End With
However am receiving an error: "Unable to set the Weight Property of the Border Class". The odd thing is, I only receive the error on the following 2 lines:
Code:
.Borders(xlEdgeBottom).Weight = xlMedium
'and
.Borders(xlInsideHorizontal).Weight = xlThin
The sheet is not protected, events are disabled, and the range that gets selected changes dynamically based on the number of rows of data in the table, however in this example cells A3:L15 are selected.
Use One Series To Color Weight Another In Pivot Chart
Jan 19, 2013I have a data set that I'm trying to present in a pivot chart and am wanting to use one series to color code or weight another series in the chart. For instance, let's say I have different product categories and two metrics for each, a profit margin (expressed as a %) and a revenue figure (expressed as $s). I want the height of individual bars to represent the profit margin but have the level of opaqueness represent the revenue figures...ie the more revenue associated with a product the more opaque it becomes.
View 6 Replies View RelatedRunning Total Of Weight Loss & Percentage
Mar 15, 2008I was wanting to put it on a spreadsheet. Probably a pretty easy deal, but I don't know the formula to use. this is what I want: Joes start weight 200 minus week ones weight, then the original 200 minus week 2's weight and so on till week 8. I want to keep a running total of weight lost in pounds as well as percentage.
View 4 Replies View RelatedTo Calculate That Loss Or Gain As A Percentage Of Their Original Weight
May 1, 2009I run a slimming club and would like to use Excel to keep records of members weights, losses, gains etc. What I would like to do is enter their starting weight into a cell then each week when they are weighed enter a loss or gain in an adjacent cell. I would then like Excel to calculate that loss or gain as a percentage of their original weight. Is this possible?
View 11 Replies View RelatedSum Each Order On Another New Coloum Which I Will Create Called Total Weight
Sep 17, 2009Hi Guys,
im really stuck and could use one of your expertise.
i have an excel spreadsheet with 65,000 lines of data
i have 9 Coloums in the the file
Despatch DateCustomerDseqOrderLineItemPost CodeVol m3Gross Kg
13/02/09jason00002029095R055TR4 8QQ0.1099280.3313/02/09jason00002034741R043TR4 8QQ0.31621218.313/02/09jason00002034742R064TR4 8QQ0.8793673213/02/09jason00002034743R045TR4 8QQ0.94863684.9
i need a line here to sum it before the next order starts?
13/02/09jason200002033141A157WD18 7QX0.02832113/02/09jason200002033142A096WD18 7QX1.609288213/02/09jason200002033143A125EJAWD18 7QX0.849646.813/02/09jason200002033144A09JJAWD18 7QX0.13732102.8
im trying to create a formula that will sum each order on another new coloum which i will create called total weight
i need it to search the date then the customer name then the gross kg and total them up as there is multiple orders
Shipping Charge Calculator Based Upon Weight To A Worksheet
Apr 15, 2008I’m trying to add a shipping charge calculator based upon weight to a worksheet. I was trying to do with with VLOOKUP (my first attempted use of this) so I created a second worksheet called ‘Shipping’ which has the weights in column A (Weight) and the corresponding shipping cost in column B (Price). Up to 70 pounds, column A increases in two-pound increments (A2 through A36, 2 through 70 lbs); from 70 through 150 pounds, the increases are in five-pound increments (A36 through A52, 70 through 150 lbs). The total weight to be shipped is derived from SUM(D2:D30), located on the first worksheet called ‘Order’ in cell D32. In cell E32 I have entered this formula: VLOOKUP(D32,Shipping!A2:B52,2).
My problem is if Order!D32 returns something like 4.5, the value for four pounds is the result, while the six-pound charge should be the result. If I round this value up to 5.0, 5.5 or even 5.9, I get the same result.
I know I’m not supposed to guess at what I need to do, but these are my thoughts: 1) I need to modify the VLOOKUP formula to select the next higher value, i.e., so the 6 lb charge is selected for E32 when D32 contains 4.5 lbs, or the 85 lb charge is selected for E32 when D32 contains 82 lbs, 2) I need to add a ROUNDUP function to the SUM formula; this would need to round up to the next even number up to 70 lbs and then in increments of five above 70 lbs. I don’t know if either approach is correct, and in any case, I couldn’t figure out the syntax for either of these.
I’ve attached a sample spreadsheet, Shipping_Charge.xls.
Freight Table - Weight And Zone Lookup Return Cost
Mar 4, 2014I need a courier rate returned based on the zone and weight of the shipment. The rate table has 10 zones (B1:K1) and 12 weight classes (A2:A13)
In the sheet "data & result" I want the cost returned in the yellow cells from looking up the weight (D) and zone (C).
Calculate Players Ranking Based On Their Weight Categories And Attempts Total?
Jan 31, 2014I am trying to calculate players ranking based on their weight categories and attempts total, e.g. Category (50kg, 69kg etc..) Rank should be calculated automatically the highest total value of cat. 50kg is 1st second highest is 2nd etc. However, if tow players or more within the same Category have scored same point ranking will be calculated based on Body Weight less comes first and if both have similar weight calculation will be based on Start # first player comes first etc..
Table:
Start #
Name
Body Weight
Team
Category
Total Point
Rank
1
Player #1
49.2
Team #1
50kg
75
Dimensional Table
Oct 12, 2009i have a problem with my report.
there is a dimensional table:
DIM RESULTSDIM_111.1DIM_111.8DIM_111.2DIM_25.3DIM_25.5DIM_380.2DIM_380.1DIM_380.35
i need to make a new table in wich all "dim" will repeat only once and the results will be the average of the results that belongs to the same "dim"
the times that the "dim" repeats can change and the "dims" could be not only till 3
Macro – Two Dimensional Look Up
Mar 1, 2010The workbook has two sheets. Sheet1 has numbers in column A going down the sheet and dates in row 2 going across the sheet starting in column B. Sheet2 is similar but the column and rows do not line up with sheet1. I would like the macro to look at the numbers in column A and the dates in row 2 on sheet1 and find the same match of number and date in sheet2 and enter the value from sheet2 into the appropriate cell in sheet1.
I understand it can be done in a formula with index and match but I would prefer a macro.
Finding A Value In 2 Dimensional Array?
Jan 15, 2014i have a sheet in template i use in preparing bid packages for electrical installations.it relates to locating in a (building) grid the locations of the motor control (mcp) and power panels (cdp).my desire at this point is to find a way to local a unique value (mcp or cdp) in a 2d grid and then return the column and row names from the same grid. eventually this information will populate a table of all the mcp's and cdp's with their locations.
my sticking point appears to be finding a unique value in a 2d table. this value can be anywhere in the table, not just the first column.
i've tried the lookups and index/match. match fails when i extend the lookup_array beyond the first column.
not sure if this is even possible.
Sorting Variants (two Dimensional)
Feb 6, 2014Is there an easy way to sort variants? I've searched the internet and it seems that sorting works just with ranges
[Code] .....
I have variant M with 20 rows and 4 columns and want to sort the rows according to the fourth row (from the smallest to the largest). I tried analogical things such as:
[Code] ......
which does not work. I do not want to believe that VBA does not have any internal way (function) to solve variants sorting since it should be quite casual thing..
Bi-dimensional Dynamic Range
Jun 13, 2006I've tried the below formula to get a bi-dimensional dynamic range that is defined by the last no blank column and last no blank row, too.
=A1:INDEX(A1:D18,MAX(NOT(ISBLANK($A$1:$D$18))*ROW($A$1:$D$18)),MAX(NOT(ISBLANK($A$1:$D$18))*COLUMN($A$1:$D$18)))
Does any one have a different approach to get this without using the offset function?
Interpolate Two-dimensional Array
Feb 14, 2007With a known X and Y, trying to solve for Z from a table. ie: IF a variable X is defined across a row, another variable Y defined down a column, the data field Z fills in-between. What do I need to use to interpolate for both X and Y to solve for Z?
View 9 Replies View RelatedFunction For 2-dimensional Array
Feb 27, 2007I am trying to write a public function that fills a table for a 2-dimensional array and am having trouble with my named ranges. The x-axis is based on years (range F2:O2) and the y-axis is a q_factor (range E3:E23) so the data range would be (F3:O23. The following outlines my logic:
Public Function bondValue(years As Range, q_factor As Range, z As Double)
Dim nRow As Long, nCol As Long
Dim bondPort As Range
nRow = q_factor.Rows.Count
nCol = years.Columns.Count
sumTau = 0
