I need a courier rate returned based on the zone and weight of the shipment. The rate table has 10 zones (B1:K1) and 12 weight classes (A2:A13)
In the sheet "data & result" I want the cost returned in the yellow cells from looking up the weight (D) and zone (C).
I would like a lookup that takes multiple criteria and that is not an array formula! Unfortunately I decided to use array formulae and my spreadsheet went to over 45mb!! Not good. I've searched the forum for an answer to my questions but couldn't find any! I've attached a spreadsheet as an example. The examples I am using have {Sum(IF)} formulae in it (array) and I would like to change those to others that will not increase the file size so much and will not take too long to calculate.
Basically, I would like a lookup that will return me the Amount Paid and Full Cost based on the person's name and the date. the data and the results table are both on separate sheets. It would be nice to bring that file's size back down to less than 4mb!!
My aim is to return a value from a table (Price of models) using a two way lookup method.
E.g. The code is CA45-AI, I'm looking for a formula to match the first 2 letters 'CA' to the TYPE RANGE (cell range) so excel knows to return a value from the CA row.. then, match the number '45' (from the CA45-AI (cell b3), so in the end.. excel returns the value (price) '90'.
Another example, Cell B5 is RA34-AI, so excel should return a value of 80 from the Price Of Models (cell range).
I am trying to return a value from table below (column 4) based on values in the 1st 3 columns. I have data with the 1st 3 columns but need to lookup each and return the 4th so I have tried some formula's with if and vlookup statements but keep getting lost....
View 9 Replies View Relatedthe formular that i have in the attached file is returing all the customer numbers
Is it possible to return only one value of each
the data is in the "data" sheet and the formulars are in sheet1
I have been assigned a task of finding the lowest cost of four possible solutions however I have quite an extensive list of items to work with. To make this easier, I need to be able to find the lowest cost in my row (which is not sorted by lowest to highest value) and return the column heading associated with that lowest cost.
View 2 Replies View RelatedI'm struggling with match, index and lookup functions. I have a formula in column D that calculates the percentage of answers against the total score for that category. The way it calculates enables me to delete rows if they are not needed and still provide a total count and a percentage score.
Now the percentage is returned from a dynamic data set, I want to plot the percentages on a spider/radar chart. Instead of manually creating the chart or using a pivot, I wanted to lookup the percentages (column D) against the category (Column A) in question and plot so the chart updates as the user changes the answers.
Pivot_example.jpg
Regarding the attached pivot table screen shot, I would like to be able to add total revenue and cost for each product and overall to this pivot table. IOW, instead of just showing the net amount of 3,200 for all blenders, I would like it to show Revenue of 12,500, Cost of (9,300), and the net amount of 3,200 for all blenders (i.e., for Boise and Chicago combined), in addition to the totals for each of the two plants. Also would like to see total revenue, cost, and net for all products and plants combined at the bottom. Can this be done?
I'm building a freight calculator and am considering some professional consulting options, but before I do that I wanted to see if I could overcome this one problem. If I can, I think I might be able to complete the calculator myself.
Here's my conundrum:
A potential customer enters "80802" for zip code and "Solomon" for store.
StoreLocation_________ City_______ State_____ Zip______ Distance
Solomon__________ Arapahoe _______CO ____ 80802_____ 270
Garden City_______ Arapahoe_______ CO _____80802_____ 143
The formula (or series of formulas) I'm looking for would then refer to the following hidden sheet and return Arapahoe, CO and a distance of 270 miles from Solomon.
Looking for a formula for total cost based on a list of hours for each employee and a table of rates for each employee.
Please see attached file : Formula.xlsx
General accrual spreadsheets. I'm looking for an accrual spreadsheet where I can estimate freight and also for our gas, electric and water usage which is tracking usage down to the day.
View 2 Replies View RelatedI want to create an Excel sheet that calculates the charges of a freight based on predefined parameters.
I got 3 service types as shown below, two freight types and 12 different destinations both NT and SA have 6 different destinations:
I want Excel to do the following:
If Road and Carton and to NT-Country and weight is 7 then 7*1.000089 is the result
1 to 15
>15
Service
Type
NT
METRO
0.337284
0.337284
[Code] .......
I am trying to perform a lookup (vlookup) function in a cell in excel and wish to have the range as a variable, so that I can adjust which column the lookup function refers to.
View 4 Replies View RelatedIn a financial environment we have a calculator which uses iteration to allow for a cost being added to loan amount where the cost is based on the total loan amount. Iteration is set to 100 iterations with max change .001
On one PC the first time the calculator is opened it gives a particular (incorrect) result. If the input cells are cleared and the data re-entered, it gives the correct result. This only happens on one particular PC. Is there some other setting , other than the iteration setting, that would cause this?
I am trying to use lookup function to lookup for data in another table (we call it table A). Unfortunately, whenever the code is not in the table A, Excel will return the data from the previous row.... is there any possible way to prevent this... in another word, if the code does not exist in the table A, I want Excel to return 0 or some other figures.
View 9 Replies View RelatedI have data that change in BG22:BG4000, trying to do a average, but it take all the empty data and put it in, how can I have a averaga only of numbers above 1?
View 11 Replies View RelatedI have a large number of events listed with date and time of the event, but the time of the events a listed in central time.....I need them to be listed in eastern time.IE 3:00pm Needsto read 4:00pm. I have tried to add 1 to the cell, but that does not work(=C2+1) it reads 3:00pm?
is there a way to add an hour to the cell?
I have a spreadsheet that has Zip Codes by Service Days, and then I have another Spreadsheet Zip Code Ranges and the Zone they fall in. I want find the Zip Code associated within that Zone for the Zip Code. I listed some data below.
Zip Code Spreadsheet
State Destination Zip Service Days
NY 12095 2
Zone Chart
From Zip
To Zip
Zones
[Code].....
I'm trying to see if you can look up multi columns for a number and when it finds it return back to one column and return that data?
I am trying to sort out territories for a state I work on; the territories are divided up by zip codes.
i.e.
A B C D
territory 1 12345 54321 11222
territory 2 22222 33333
territory 3 44444 55555
and what I want is to say put a formula in cell B3 on Sheet 1 pointing to cell C3 that has zip code 33333. I want it to then take that and look in Sheet 2 and search A1:D3 and when it finds 33333, return "territory 2" back to cell B3 on Sheet 1.
I've got a CSV file that has been sent to me where each entry has a vehicle reports in with certain metrics. Included in these metrics are the time the metric is reported. The problem I am having is that the time is delivered in UTC date/time (in Column A). Column B has an "offset" to show how many hours difference there are between the UTC time and the local time for that particular vehicle.
Problem 1 - My initial thought was to use "Text to Columns" with space as the delimiter, thinking I could just run a simple subtraction formula once completed. The problem here is that if an entry is recorded after 7pm local time, the UTC time moves into the next day, and the simple subtraction formula will not take that into account.
Problem 2 - Even if there was a workaround, it seems that the numbers in the "Offset" column don't work well with time calculations because they are not a time (it's -5, -6, -7, or -8).
I receive from my broker in the States a financial report that shows transaction dates in American EST. As I'm in Australia this is somewhat annoying. Is there a way, perhaps adding an extra column, that converts this time to Australian Eastern Standard Time?
View 4 Replies View Related I have a zone matrix I'm working on. How can I have a formula match the state and return the numeric value assigned to the state?
Say I enter WA in cell "G5" and in column A I have the states and column B has the numeric value assigned. I need to to match and return the value.
So if "OR" is entered the returned value is "1"
StateZone
WA1
OR1
ID1
[Code]....
I would like to add something to my workbook which, when called, gives you current time in Tokyo, Australia, USA, London, Europe (for example).
I am trying to work out what would be best.
Would it be possible to create this on the Status bar?
Alternatively, i guess a Userform shown as modeless (but i am not sure if the controls holding the times will update.
Need running clock in Excel... in A1 I have put running clock which is taking current system time. However, I want to add running clocks for EST in B1 - CST in C1 and PST in D1.
VB code I used to display current system running clock
Global clockOn As Boolean
Sub runClock()
Range("A1").Value = Now()
If clockOn = True Then
[Code] ......
Attached File : Time.xlsm
I need to place a lookup table in a work book and I'm not sure how to do it.Below is what I specifically need in my workbook.
c. The workbook will need a lookup table that will lookup the tuition, clothing
and entertainment figures depending on the selection of college, and will
ensure that only the colleges on the list are selectable. That is, the
worksheet will not allow the user to enter another college not in the list.
The lookup list must be on a worksheet by itself at the end of the workbook.
I am attempting to do a search on a 2 dimensional table, based on Product Code/Month. Is there a function, addin or a macro that will allow me to do this? All I can come up with is a messy combination of VLOOKUP/HLOOKUP/COLUMN.
View 2 Replies View RelatedI have this Spreadsheet that has different country, Is it possible that it will auto convert the time into PHT Time (GMT +8) which is in Column A.
For example:
Its 3PM (Cell G1) in Bhutan. I want it to be converted in GMT +8
So therefore the time for GMT+8 will be 5PM and will be shown in Cell A1.
Also there will be an automated identifier in Column B that will identify if that time is for morning shift or night shift.
The morning shift is 12PM til 8PM
While the night shift is 8PM til 11AM.
I get a file every day that contains online orders for a client. They have made the state and country fields on the order form free text, so sometimes the State field has CA, sometimes California, sometimes even Cal or Cali. Oregon may be represented as OR, Oregon, or Ore (and one time even Orygon.)
The country field may have US, USA, United States and sometimes United States of America.
Well, they need this data imported to their system with the states fully spelled out: Oregon, California. And the country spelled out as well: United States, Canada.
Right now I have a lookup tables worksheet that I just have a macro run a vlookup on. But I'd like to know if there is a way I could just put it all in the code, without the external tables.
i.e. some code that, in English, would basically say, "If the value of any cell in column K is among these values, replace it with those values, otherwise just leave it as it is". Could I do that while containing the two sets of values right in the code rather than on a worksheet?
I really just want to replace the standard abbreviated state/country codes with the full text, and if the value does contain Cali or Ore, let them manually make the change. Hopefully that will finally nudge them to just make the online order form utilize a drop-down list of states and countries, rather than free text.
A
B
C
D
E
9
et Boxes
Gross Weight
Ice Weight
Box Weight
Net Weight
10
Box 1
60
5.5
4.5
50
d10=IF(B10>=1,4.5,0)
[Code] .......
I am trying to create a weight chart, which works in stones, pounds and ounces. My first query is that each time I enter the weight in for each day, I need it to deduct 1ib 4oz from the weight I enter. At present I have seperate columns for stones, pounds and ounces. However, if I try to do a simple lbs minus 4 it doesn't work, because sometimes the pounds are less than four - so instead of taking the stone column down by one and then deducting the remaining pounds, it just puts the pounds columns to -3 or similar.
Also, I would like my table to work out weight lost over a period of time - so, I have my starting weight at the top and then I want my most recent weight to be taken from the starting weight, leaving weight lost - I can't get this to work either. Is there a way to make it so that the calculation uses the most recent weight entry and does so automatically?
If anyone has any solutions to these queries, I would be very grateful...as I have to caculate this for a number of people and it would be much quicker if it did it all automatically upon entering the most recent weight.