Disallow Specific Format Of Sheet Name From Macro
Jun 30, 2007
The below piece of code is from a macro that creates a summary sheet based upon the name of the worksheet. My problem is as follows: I have another macro which copies the summary sheet and renames it in the format dd-mm-yy and I want to exclude this from the macro that constructs the summary sheet. How do I modify line 4 to capture the exclusion of all sheets with format ##-##-##? Note: The current line is my poor attempt at doing it.
If (A$ = "Template") Then Goto 10
If (A$ = "Create New Sheet") Then Goto 10
If (A$ = "Summary") Then Goto 10
If (A$ = Like "00-00-00") Then Goto 10
' Process the current sheet
Range("A" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C15"
Range("B" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C16"
Range("C" + Format(j)).FormulaR1C1 = ""
Range("D" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C18"
Range("E" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C19"
Range("F" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C20"
Range("G" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C21"
Range("H" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C22"
j = j + 1
10 Next i
View 10 Replies
ADVERTISEMENT
Mar 25, 2013
So I have this worksheet full of formulas that I do not want users to accidentally delete. Now, I know I can use the standard "Protect Sheet" option to not trigger any accidental changes but I would like an additional safety check (since management users will have access to unlock the sheet) via a macro to prompt the user with a message box (with Yes / No options) which essentially asks the user if they are sure they want to delete a cell if the "Delete" button is chosen? If the answer is No, nothing will happen. But if the answer is Yes, it will delete the contents in the cell.
View 1 Replies
View Related
Apr 2, 2009
How do I change this macro to refer to the current sheet name instead of "FullScreen (2)"?
View 4 Replies
View Related
Jun 7, 2006
I am trying help protect a project from all my colleagues that have a version of password breaker that is actually an add-in. I have already managed to disable or grey-out all of the other commandbar options that I don't want them to have access to during their use of the model but can't figure out how to disallow them from accessing the "Add-ins" option from the "Tools" menu. I can, of course, disable the entire tools menu but don't want to do that yet.
View 9 Replies
View Related
Apr 15, 2014
I'm trying to add some code so that it only runs on the specific sheet or a range of specific sheets - but this list might change in the future) as a worksheet event... When I have been doing this in the past, I have been copying the code to each of the individual sheets but this now seems to be incorrect.
This time, though, I have created the code on one sheet (with a Private Sub Worksheet_Calculate() event) which launches a macro in a separate module - my logic being to have as little code as possible in each of the sheets for copying, pasting, editing purposes, and centralise the main code in the module. However, I've noticed that this code is actually being run on all the sheets - even those I do not want it to run on. I thought, while developing this code, that it would only run on the one sheet it had been added to (e.g. right click the worksheet name, view code).
View 7 Replies
View Related
Jun 16, 2014
I have my template workbook with sheet tab as following:
Summary/Report/Contact 1/Contact 2/Contact 3/Contact 4/Contact 5/Note/
And I have one macro to run and only want to run in the specific sheet as below:
Summary/Report/Contact 1/Contact 2/Contact 3/Contact 4/Contact 5/Note/
The sheet name for contact 1 to 5 is varies means it can be change to any name based on different job. How should I write my macro in order to do that with one macro?
View 5 Replies
View Related
Sep 7, 2009
Writing a macro that when runned will show only two specific sheets in a work book. If i run macro 1 the sheet "xxx" and "start" should be the only visible sheets in the work book. If i run macro 2 after having runned macro 1 sheet "yyy" and "start" should be the only sheets appearing.
View 9 Replies
View Related
Dec 13, 2009
Is there a way to disallow users from using fromulas in a spreadsheet? I have an issue in which users are using formulas to concat data as a shortcut to typing in data but they are constantly referencing the incorrect cells.
View 6 Replies
View Related
Feb 23, 2010
x = InputBox("Please Enter the Loan Amount:")
If x < 0 Then MsgBox ("please enter a loan amount greater than 0.")
but then how do I bring up the input box again until it is filled in correctly?
I tried Do until a few times but made a mess of it, I also need to disallow alphabetic and symbol characters.
View 9 Replies
View Related
Feb 23, 2009
I import a raw data file from our phone system into sheet 'imported', I then want to display the data on sheet 'formatted' how I have displayed it for the purposes of this example. I had a solution to this but the formatting out of the phone system has changed.So I need it to list the agents names, and then the corresponding time for each activity. The activities are listed on B3:I3.
View 2 Replies
View Related
Oct 16, 2007
Im looking to create a macro that goes to a specific sheet on my workbook upon selecting an option. Example being I open the spreadsheet and a list of options come up such as:
BRIAN
JOHN
JAMES
PAUL
STEVEN
Upon selecting one of those names you are transferred to the sheet named "BRIAN", "JOHN", "JAMES" etc etc etc
View 4 Replies
View Related
May 27, 2009
I have a workbook that has 2 similar worksheets. One called "Wood Shafts" and the other called "Iron Shafts" I have the macros worked out for the sheet called "Wood Shafts" and I just realised I need to apply similar Macros to the sheet called "Iron Shafts" (same functions but different values from different columns). Some how I need the code to be able to tell the difference between the two sheets. I am at a loss.
View 4 Replies
View Related
Apr 4, 2013
Is there a way to format cells to where - when you type in a certain person's first name, it will insert something entirely different?
This has seemed to have happened on a computer at work.
In Excel, when I type in "Martha" then tab, or otherwise leave that cell, Martha changes to "Cool"
If I type in anyone elses name - it stays that name. But if I type in "Martha" .. it changes to "Cool" with the bullet and the word Cool.
View 6 Replies
View Related
May 6, 2014
I have a workbook named as "DCR_Summary". In the sheet "FX", I want to get the sum of a specific column from two different workbooks named as "WNCR REPORT" and "DCCR-REPORT". The name of the column is "FXCOLL". The summation should start in row 7 all the way down where data is available. The good thing is that, my sum range will always starts at row 7 in both files but the bad thing is that the position of column "FXCOLL" is changing every day. The expected result is shown in the attached "DCR_Summary". It should pick at the same time the Sheet names where the summation came from. Sheet names is also changing and sometimes the FXCOLL is nil, hence, 0 value can be returned.
View 5 Replies
View Related
Aug 28, 2009
I have two workbook having 8 worksheet each. Every day I need to copy data from previous day worksheet and paste it on new workbook with same sheet name.
For example :-
Workbook1 is having sheet named aa, gg, tk .....
Workbook2 is having sheet named as same as Workbook 1
Now, I want macro to copy data from Workbook1, sheetname 'aa' and paste the same in workbook2 in sheet name 'aa' and likewise
View 6 Replies
View Related
Nov 13, 2013
I am trying to print one of the Sheets in my Workbook by looking at a specific cell that can have one of the sheet names.
View 7 Replies
View Related
Nov 19, 2009
I have a excel sheet which is completely formula driven and no macros in that.
I want to macro which can save that excel sheet to a specific location.
View 9 Replies
View Related
Jul 28, 2006
This is the code I have:
Sub Auto_Open()
Sheets("Data").Select
Range("A2:E32").Select
Selection.Copy
Sheets("May").Select
ActiveWindow.SmallScroll Down:=-9
Range("A2").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A1").Select
Sheets("Data").Select
Range("A1").Select
ActiveSheet.Paste
Range("A1").Select
Sheets("Sheet1").Select
Range("A2:E32").Select
Selection.ClearContents
Range("A1").Select
End Sub
1) How do I set this up so that if the cell Z1 reads 1, it will paste the data to the "January" Sheet, if Z1 reads 2, it will paste to "February" Sheet, if Z1 is 3 it will paste to "March"......
View 9 Replies
View Related
Apr 27, 2013
A
B
C
D
[Code]....
There are four sheets (labeled A,B,C)
Depending on the contents in cells in Columns A and B (which have 1000+ rows), I want to change the background color of a referenced cell elsewhere:
For each row (lets say from 2-1000)
1. If "A" cell is blank -- referenced cell (address in columns C & D) should be colorless -- (as in Row 2 --- cell Z5 in Sheet "C" should be colorless)
2. If "A" cell has text AND "B" cell is blank, reference cell should be colored BLUE -- (as in Row 3 --- Cell F3 in Sheet "C" should be BLUE)
3. If both "A" and "B" cells have text, reference cell should be colored YELLOW -- (as in Row 4 --- Cell C5 in Sheet "B" should be YELLOW)
While I could do this with a conditional format in every referenced cell, it would take too long to enter them.
View 7 Replies
View Related
Mar 24, 2009
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
View 3 Replies
View Related
Dec 15, 2006
I am fairly new to macros and I am currently working on a project where I would like to create a 2 buttons which will filter by date and by owner. The spread sheet I have is fairly large and is added to weekly.
I have two objectives that I am trying to reach:
First I need to filter for all past due task items from the Thursday of the week I am working in back and for a specific person (owner) by the finish date
Second I need to filter for upcoming tasks one week out for a specific person (owner). The objective of this is so that on any given day a user can find any upcoming tasks that are due one week out.
If this is not an option. My thought was to create an input box where the user can input the date and the information on the spread sheet will pull all past due items or upcoming tasks. These two items need to pull seperatly not together.
I know I can create a macro by autofiltering by columns however I am trying to avoid having to go in and change the date each week.
Start date is column E
Finish date is column F
Owner is column L
View 10 Replies
View Related
Sep 13, 2010
I need a macro that will look for a specific text string in the tab names of the workbook and replace it with a new specified text string (leaving the rest of the existing tab names). In other words, a simple find/replace but applied to all tab names in the workbook rather than cells. Ideally, I'd like it to pop up something and ask for the text to find and the text to replace it with, so I don't have to edit the macro itself each time I want to use it, but editing the macro each time is fine. Either way will be wonderful.
View 9 Replies
View Related
Dec 30, 2011
how to work macros or VBA
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date
Column D = loan# A
Column E = loan# B
Column F = status
Column H = followup needed
(Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows:
Column G&H = Merged cells where due date will need to go
Column I&J = Merged cells where loan# A will need to go
Column K&L = Merged cells where loan# B will need to go
Column M thru S = Merged cells where followup needed will need to go
View 9 Replies
View Related
Sep 14, 2007
I'll get straight to the point: How can I change this text format from 474556788 to 0-47455678-8 (dash added after 0 and before the last number). I need to apply this to around 5000 rows (can't do that manualy). I want it to be int his format:
474556788 to 047-455678-8
Tks Auto Merged Post;474556788 to 047-455678-8 (This is the wanted format)
View 10 Replies
View Related
Jan 24, 2010
I'm trying to format my email generated of excel sheet to have an HTML formal before they are sent out using MS Outlook.
I have googled, searched your forums and also tried to figure out a solution with the existing helps on the internet. I need help on how to format emails genarated out of my excel sheet. I know a bit of HTML syntax but a newbie to VBA. I'm guessing the formatting has to be done in the Emailbody text function in my code.
I'm also trying to understand the logic behind the code and also learning excel vba bit by bit at the minute.
View 10 Replies
View Related
Feb 23, 2014
I have data in 2 different workbooks, and I need to transfer all data in 'Jx_ex1' to sheet1 in the 'template' workbook, and all data in 'Gr_ex1' to sheet2 in 'template' workbook. All data should be transferred to the same cell numbers, from A1 to Y5000. I actually have loads of workbooks to transfer to the template but if I have an example with the two then im sure I can work out how to modify it. All files will be in the same folder.
View 8 Replies
View Related
Jan 14, 2009
I have a seriew of drop-down combon boxes that ultimately "drill-down" to a resulting sheet & cell reference in cell F7. Based on the criteria selected in these drop-downs the resulting sheet & cell reference (cell F7) will change. I am looking for help with a macro that, when run, will take me to the sheet & cell referenced in cell F7. When I do a goto function it always remember the last place I went to and never goes to the latest data in cell F7.
View 9 Replies
View Related
Nov 7, 2008
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
View 9 Replies
View Related
Oct 26, 2012
Every month, I have an import a report to a spreadsheet. At my column A, it supposed to be a date format.
For some reasons, I have a combination of a few cells of date format and a few cells of general format with no order at all.
What I need is: Search in the A column, if date format leave it , if not change from general to date format.
View 2 Replies
View Related
Jul 16, 2009
I am using Data Validation on some fields to create a drop down list from a named range! These fields however allow you to enter values that are not in the list.
Is there a way to make the cell have to be an entry from the data validation list?
View 6 Replies
View Related
