Run Macro In Specific Sheet Range?
Jun 16, 2014
I have my template workbook with sheet tab as following:
Summary/Report/Contact 1/Contact 2/Contact 3/Contact 4/Contact 5/Note/
And I have one macro to run and only want to run in the specific sheet as below:
Summary/Report/Contact 1/Contact 2/Contact 3/Contact 4/Contact 5/Note/
The sheet name for contact 1 to 5 is varies means it can be change to any name based on different job. How should I write my macro in order to do that with one macro?
View 5 Replies
ADVERTISEMENT
Jan 20, 2009
I would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.
View 8 Replies
View Related
Apr 2, 2009
How do I change this macro to refer to the current sheet name instead of "FullScreen (2)"?
View 4 Replies
View Related
Mar 4, 2008
I am attempting to populate a ComboBox ( named "SRnumber2") on a userform (named "UpdateSR"), but have hit a brick wall. The following testing code was working but now it is not:
Private Sub UpdateSR_Initialize() 'This section of code initializes the drop-down boxes.
'Add list entries to SR Number combo box. The value of each
'entry matches the existing SR Information spreadsheet entries in column "A"
Sheets("SR Information").Select
SRnumber.ColumnCount = 1
SRnumber.RowSource = "A2:A200"
SRnumber.BoundColumn = 0 ...........
View 9 Replies
View Related
Apr 15, 2014
I'm trying to add some code so that it only runs on the specific sheet or a range of specific sheets - but this list might change in the future) as a worksheet event... When I have been doing this in the past, I have been copying the code to each of the individual sheets but this now seems to be incorrect.
This time, though, I have created the code on one sheet (with a Private Sub Worksheet_Calculate() event) which launches a macro in a separate module - my logic being to have as little code as possible in each of the sheets for copying, pasting, editing purposes, and centralise the main code in the module. However, I've noticed that this code is actually being run on all the sheets - even those I do not want it to run on. I thought, while developing this code, that it would only run on the one sheet it had been added to (e.g. right click the worksheet name, view code).
View 7 Replies
View Related
Sep 7, 2009
Writing a macro that when runned will show only two specific sheets in a work book. If i run macro 1 the sheet "xxx" and "start" should be the only visible sheets in the work book. If i run macro 2 after having runned macro 1 sheet "yyy" and "start" should be the only sheets appearing.
View 9 Replies
View Related
Jul 19, 2014
All, can I protect my worksheet while at the same time allow users to unhide a specific range of cells?
I'm hiding cell range FA:FK, but based on certain conditions I want to allow the user to unhide the cells but I do not want the user to be able to unhide any other hidden ranges. if there is a way to do this without using VBA. If it cannot be done with VBA
View 1 Replies
View Related
Mar 5, 2014
I am using the below macro to delete row:
HTML Code:Â
Sub REMOVE()
ActiveSheet.Unprotect Password:="P@ssw0rd!"
Set Rng = ActiveCell
ActiveCell.EntireRow.Delete
ActiveSheet.Protect Password:="P@ssw0rd!"
End Sub
However I would like not to apply that macro when I am in the row 12:26! btw, I am running my script by pressing CTRL+D.
Last thing would it also be possible to "extend" the exception to another range ? (name manager -> row 84:276 called "NEXT") if possible to define two name manager for the exception to implement to the existing macro.
View 1 Replies
View Related
Oct 16, 2007
Im looking to create a macro that goes to a specific sheet on my workbook upon selecting an option. Example being I open the spreadsheet and a list of options come up such as:
BRIAN
JOHN
JAMES
PAUL
STEVEN
Upon selecting one of those names you are transferred to the sheet named "BRIAN", "JOHN", "JAMES" etc etc etc
View 4 Replies
View Related
May 27, 2009
I have a workbook that has 2 similar worksheets. One called "Wood Shafts" and the other called "Iron Shafts" I have the macros worked out for the sheet called "Wood Shafts" and I just realised I need to apply similar Macros to the sheet called "Iron Shafts" (same functions but different values from different columns). Some how I need the code to be able to tell the difference between the two sheets. I am at a loss.
View 4 Replies
View Related
Jun 30, 2007
The below piece of code is from a macro that creates a summary sheet based upon the name of the worksheet. My problem is as follows: I have another macro which copies the summary sheet and renames it in the format dd-mm-yy and I want to exclude this from the macro that constructs the summary sheet. How do I modify line 4 to capture the exclusion of all sheets with format ##-##-##? Note: The current line is my poor attempt at doing it.
If (A$ = "Template") Then Goto 10
If (A$ = "Create New Sheet") Then Goto 10
If (A$ = "Summary") Then Goto 10
If (A$ = Like "00-00-00") Then Goto 10
' Process the current sheet
Range("A" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C15"
Range("B" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C16"
Range("C" + Format(j)).FormulaR1C1 = ""
Range("D" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C18"
Range("E" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C19"
Range("F" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C20"
Range("G" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C21"
Range("H" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C22"
j = j + 1
10 Next i
View 10 Replies
View Related
May 28, 2013
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
View 9 Replies
View Related
Jun 19, 2014
I have data that is on a separate .txt file (the source file) that resembles this;
A
B
C
D
E
F
1
Case
District
Pct
Division
Level1
Level2
2
305035
0
20
72
[Code] ..........
Using VBA from within the destination workbook, I would like to use an input box that allows the user to request/specify what numerical number (0 through 55) in Column B of the txt file (the source file) will be used to determine what data to copy to the destination file. The cells to copy to the destination file would be from Column A through Column G of the source file onto Sheet1, E2 of the destination file.
Column B of the Source file will only contain numbers. However there will be numerous identical numbers in Column B. All of which will need to be copied onto the destination workbook.
From the sample above, if the user were to enter '15' in the input box, the desired result on the destination sheet beginning at E2 would look like this;
E
F
G
H
I
J
1
Case
District
Pct
Division
Level1
Level2
2
502046
15
1
3
[Code] ............
View 9 Replies
View Related
May 6, 2014
I have a workbook named as "DCR_Summary". In the sheet "FX", I want to get the sum of a specific column from two different workbooks named as "WNCR REPORT" and "DCCR-REPORT". The name of the column is "FXCOLL". The summation should start in row 7 all the way down where data is available. The good thing is that, my sum range will always starts at row 7 in both files but the bad thing is that the position of column "FXCOLL" is changing every day. The expected result is shown in the attached "DCR_Summary". It should pick at the same time the Sheet names where the summation came from. Sheet names is also changing and sometimes the FXCOLL is nil, hence, 0 value can be returned.
View 5 Replies
View Related
Aug 28, 2009
I have two workbook having 8 worksheet each. Every day I need to copy data from previous day worksheet and paste it on new workbook with same sheet name.
For example :-
Workbook1 is having sheet named aa, gg, tk .....
Workbook2 is having sheet named as same as Workbook 1
Now, I want macro to copy data from Workbook1, sheetname 'aa' and paste the same in workbook2 in sheet name 'aa' and likewise
View 6 Replies
View Related
Nov 13, 2013
I am trying to print one of the Sheets in my Workbook by looking at a specific cell that can have one of the sheet names.
View 7 Replies
View Related
Nov 19, 2009
I have a excel sheet which is completely formula driven and no macros in that.
I want to macro which can save that excel sheet to a specific location.
View 9 Replies
View Related
Jul 28, 2006
This is the code I have:
Sub Auto_Open()
Sheets("Data").Select
Range("A2:E32").Select
Selection.Copy
Sheets("May").Select
ActiveWindow.SmallScroll Down:=-9
Range("A2").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A1").Select
Sheets("Data").Select
Range("A1").Select
ActiveSheet.Paste
Range("A1").Select
Sheets("Sheet1").Select
Range("A2:E32").Select
Selection.ClearContents
Range("A1").Select
End Sub
1) How do I set this up so that if the cell Z1 reads 1, it will paste the data to the "January" Sheet, if Z1 reads 2, it will paste to "February" Sheet, if Z1 is 3 it will paste to "March"......
View 9 Replies
View Related
Apr 27, 2014
Looking to code a loop to go to sheets whose names begin with "day" and a number and clear a specific range. How would i code this without affecting the other sheets in the book?
View 3 Replies
View Related
Dec 2, 2009
I have a workbook with 2 worksheets, Sheet1 & Sheet2.
Sheet1 has a list of products on it, with a code, pack size and cost.
Sheet2 has got 8 columns in it.
The first column will be A , B , C
The second will be D, E, F
Third will be G, H, I
Going right through to column 8 which will be V, W X
In the second column in each on I will be have a (sell by date) So B, E, H, through to W will have sell by dates in them.
What I am looking for is a macro that will give me a list of short sell by dates when I click the button. So if today’s date is 02/12/09 when the button is clicked it will give me a list of all the product that have lets say a month sell by date left, I would like to be able to change the month to anything I want, just in case I want to do a longer check on the sell by date.
When it finds a short date I would like it to check against the code, so in the first column the code will be in A, it will match that code up against the code in Sheet1 and give me a list of the Code, and the Product from sheet1 and the sell by date that’s in Sheet2. The problem I have is when data is put into the second column on sheet2 which is D.E.F, I would want it just to check that column and not the A,B,C from column 1.
View 14 Replies
View Related
Jul 12, 2014
I currently had to start from scratch as my formula kept raising the debug screen. I know the answer is simple but I cant figure out what it is. I have column A, rows 9 through 1000 with data. I want to delete the entire row of any "x" value present in column A rows 9 through 1000. I am new to VBA. So simple is good.
View 2 Replies
View Related
Aug 1, 2007
I'm working on an assignment that pulls information for different countries and I'd like to know how to go about placing the charts on a specific area. Any help would be greatly appreciated!
The concept:
With each click of a country, the country's information will be pulled from a 'data dump' that I created in the same file. The map and flag are also shown. Some of that information is just using lookups, or a combination of lookups and code, and the hardest part are the GRAPHS - which I'm having a really hard time placing and adjusting accordingly.
The problem:
As of now the charts are automatically filled as the user clicks a new country, but all of the charts are placed in weird locations, but I'd like for them to be placed in the specified ranges above.
I would like charts in the following ranges:
A20:B30 (Immigrant Group)
D20:E30 (Ethinc Group)
F20:G30 (Languages)
F13:G19 (Religion)
D10:E17 (Age structure)
This is the major part of my project that I need to complete. Any help would be greatly appreciated, PLEASE. =)
Right now I have ranges that aren't accurate, but regardless of how I try to show my range, the function does not work:
Sub CreateCharts()
Dim counter As Integer, chartname As String, xvals As String, offset As Integer, Range As String
'Delete all charts
Dim oc As ChartObject
For Each oc In ActiveWorkbook.ActiveSheet.ChartObjects
oc.Delete
Next oc
View 6 Replies
View Related
Mar 24, 2009
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
View 3 Replies
View Related
Dec 15, 2006
I am fairly new to macros and I am currently working on a project where I would like to create a 2 buttons which will filter by date and by owner. The spread sheet I have is fairly large and is added to weekly.
I have two objectives that I am trying to reach:
First I need to filter for all past due task items from the Thursday of the week I am working in back and for a specific person (owner) by the finish date
Second I need to filter for upcoming tasks one week out for a specific person (owner). The objective of this is so that on any given day a user can find any upcoming tasks that are due one week out.
If this is not an option. My thought was to create an input box where the user can input the date and the information on the spread sheet will pull all past due items or upcoming tasks. These two items need to pull seperatly not together.
I know I can create a macro by autofiltering by columns however I am trying to avoid having to go in and change the date each week.
Start date is column E
Finish date is column F
Owner is column L
View 10 Replies
View Related
Jun 10, 2014
I have the following macro to autohide some rows with no data, however its remove rows starting from column A.
[Code] .....
How do i fix this to only hide the rows in the range (H4:V50)?
View 5 Replies
View Related
Nov 20, 2008
Is there a way to use goal seek in VBA that won't trigger a full model calculation?
I would like to (somehow) perform goal seek, but only recalculate range("A1:B50") say on a single worksheet (where both the input value and the final calculated value is included in that range), as opposed to calculating the whole model inbetween each iteration.
Also, all dependencies between the input value and the final calculated result are contained in that range.
View 5 Replies
View Related
Sep 13, 2010
I need a macro that will look for a specific text string in the tab names of the workbook and replace it with a new specified text string (leaving the rest of the existing tab names). In other words, a simple find/replace but applied to all tab names in the workbook rather than cells. Ideally, I'd like it to pop up something and ask for the text to find and the text to replace it with, so I don't have to edit the macro itself each time I want to use it, but editing the macro each time is fine. Either way will be wonderful.
View 9 Replies
View Related
Dec 30, 2011
how to work macros or VBA
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date
Column D = loan# A
Column E = loan# B
Column F = status
Column H = followup needed
(Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows:
Column G&H = Merged cells where due date will need to go
Column I&J = Merged cells where loan# A will need to go
Column K&L = Merged cells where loan# B will need to go
Column M thru S = Merged cells where followup needed will need to go
View 9 Replies
View Related
Mar 26, 2014
I have recorded the below macro and I am not very happy with it. enhance the macro and add the following:
I need to copy the range "ROW" and past it below the range "MENU". Also the range "ROW" (ROW = copy of 3 line with some cells merged) is hidden.
I need to unhide and hide back the rang ROW. Right know I have to leave the range appearing otherwise my macro doesn't work.
HTML Code:Â
Sub ADD()
' ActiveWindow.LargeScroll Down:=2
Range("ROW").Select
Range("ROW").Activate
Application.CutCopyMode = False
Selection.Copy
' ActiveWindow.LargeScroll Down:=-2
Rows("7:7").Select
Selection.Insert Shift:=xlDown
Range("A7:A9").Select
End Sub
View 1 Replies
View Related
Jun 30, 2014
I need a macro, or a formula that can identify if the words in the Words Column (Column A) is contained in Title Column (Column B). If it is, It displays as "Yes". If not, display as "No".
Case is not sensitive.
Words
Title
Displayed?
Christmas
Coworker has chronic hiccups
Yes
Excel
I Love Excel
Yes
Cartman
I Like Turtles
No
Ninja
Oh Christmas Tree
Yes
Tiger
Case of the Mondays
No
Chronic
Cute Monkeys
No
View 4 Replies
View Related
