Macro To "go To" Specific Cell In A Different Sheet
I have a seriew of drop-down combon boxes that ultimately "drill-down" to a resulting sheet & cell reference in cell F7. Based on the criteria selected in these drop-downs the resulting sheet & cell reference (cell F7) will change. I am looking for help with a macro that, when run, will take me to the sheet & cell referenced in cell F7. When I do a goto function it always remember the last place I went to and never goes to the latest data in cell F7.
View Complete Thread with Replies
Related Forum Messages:
Macro To Copy To Specific Sheet Depending On Cell Value
This is the code I have:
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
1) How do I set this up so that if the cell Z1 reads 1, it will paste the data to the "January" Sheet, if Z1 reads 2, it will paste to "February" Sheet, if Z1 is 3 it will paste to "March"......
Macro To Copy Specific Cells From Row From Source & Stop When Next Row Cell = Specific Value
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
Macro Showing Only A Specific Sheet
Writing a macro that when runned will show only two specific sheets in a work book. If i run macro 1 the sheet "xxx" and "start" should be the only visible sheets in the work book. If i run macro 2 after having runned macro 1 sheet "yyy" and "start" should be the only sheets appearing.
Assigning Macro/Module To Specific Sheet
I have a workbook that has 2 similar worksheets. One called "Wood Shafts" and the other called "Iron Shafts" I have the macros worked out for the sheet called "Wood Shafts" and I just realised I need to apply similar Macros to the sheet called "Iron Shafts" (same functions but different values from different columns). Some how I need the code to be able to tell the difference between the two sheets. I am at a loss.
Disallow Specific Format Of Sheet Name From Macro
The below piece of code is from a macro that creates a summary sheet based upon the name of the worksheet. My problem is as follows: I have another macro which copies the summary sheet and renames it in the format dd-mm-yy and I want to exclude this from the macro that constructs the summary sheet. How do I modify line 4 to capture the exclusion of all sheets with format ##-##-##? Note: The current line is my poor attempt at doing it.
If (A$ = "Template") Then Goto 10
If (A$ = "Create New Sheet") Then Goto 10
If (A$ = "Summary") Then Goto 10
If (A$ = Like "00-00-00") Then Goto 10
' Process the current sheet
Range("A" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C15"
Range("B" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C16"
Range("C" + Format(j)).FormulaR1C1 = ""
Range("D" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C18"
Range("E" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C19"
Range("F" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C20"
Range("G" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C21"
Range("H" + Format(j)).FormulaR1C1 = "='" + A$ + "'!R4C22"
j = j + 1
10 Next i
Macro To Go To Specific Sheet Upon Choosing Option
Im looking to create a macro that goes to a specific sheet on my workbook upon selecting an option. Example being I open the spreadsheet and a list of options come up such as:
Upon selecting one of those names you are transferred to the sheet named "BRIAN", "JOHN", "JAMES" etc etc etc
Macro For Filtering Spread Sheet By Date And Specific Person
I am fairly new to macros and I am currently working on a project where I would like to create a 2 buttons which will filter by date and by owner. The spread sheet I have is fairly large and is added to weekly.
I have two objectives that I am trying to reach:
First I need to filter for all past due task items from the Thursday of the week I am working in back and for a specific person (owner) by the finish date
Second I need to filter for upcoming tasks one week out for a specific person (owner). The objective of this is so that on any given day a user can find any upcoming tasks that are due one week out.
If this is not an option. My thought was to create an input box where the user can input the date and the information on the spread sheet will pull all past due items or upcoming tasks. These two items need to pull seperatly not together.
I know I can create a macro by autofiltering by columns however I am trying to avoid having to go in and change the date each week.
Start date is column E
Finish date is column F
Owner is column L
Macro To Copy Specific Data From One Sheet And Paste Into Two Sheets
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
Find Specific Cell, Copy Row And Paste Into New Sheet
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim i As Long
Copying Specific Cell Ranges From A Worksheet Multiple Times To A New Sheet
I have a workbook with multiple worksheets. Each worksheet corresponds to a certain store fixture estimate. Ont these sheets I have a specific cell where you can input how many fixtures of that type are to be used.
On that sheet also, is a range of cells (ex. Range("A65:F3340")) that needs to be copied to a new summations sheet of total hours to build the project.
If sheet 1 has 1 fixture - the macro should copy the range of cells only once.
Sheet 2 has 4 fixtures - tha macro should copy the same range four times appending each set of data tot eh end of the previous, And so on for each fixture sheet.
List Files & Cell Values With Specific Sheet Names From ListBox
I have this script (below, Krishnakumar orignally provided this script).
I'm trying to edit it to add cell values from cells C16 and E16 along with the worksheet name it displays in listbox2. So lets say worksheet "rollover" is the sheet being displayed in the listbox2.
I would like for it to look something like this:
rollover TT:'data from cell C16' TA:'data from cell E16'
Public FilePath As String
Public dic As Object
Public oWB As String
Public oWS As String
Public aWS As Worksheet
Private Sub CommandButton1_Click()
Dim i As Long, wb As Workbook, n As Long
For i = 0 To .ListCount - 1
If .Selected(i) = True Then
oWS = .list(i)
Set wb = Workbooks.Open(FilePath & oWB, UpdateLinks:=0)
Cell Value To Run A Specific Macro
I have several macros that email a specific section of a workbook when I run it - I have an icon (image) per section. I want to be able to run a macro that calls one of these section specific macros based on a choice from a drop down list.
It would work this way:
- From the drop down in cell E11 I choose "New Jersey"
- I would then click on the email image next to the cell (next to E11)
- that macro would call the macro that emails the "new Jersey" section.
I realize there might be a much better way, easier even. However, I already have the other macros written out and would just want to add this step.
Macro To Delete Specific Cell Content
I am having some trouble writing a macro to delete cell content. I know which cells I want to clear, but I can't seem to get the macro to do it.
I also want to have something in the macro that inserts data into the lines that I am trying to clear. I want cell A67 to say "Payment" and cell A71 to say "Total."This is the code I am using:
Dim i As Integer
For i = 67 To 71
If Range("A" & i).Value = "--" Then
Range("A" & i).Delete
Macro To Find A Specific Word And Insert Cell
I have a large spreadsheet with about 18000 rows or data and about 60 columns. I need to a macro to find a specific word in a column like "charge" and anytime that word is found in the column to insert a blank cell in front of it.
Currently the sheet looks like this:Fee AChargeFeeChargeFee AChargeFeeChargeFee AChargeFee AChargeNeed to get it to look like this: (so I can sort and subtotal)Fee AChargeFee AChargeFee AChargeFee ACharge
a macro to the for whichever column I choose.
Macro To Capture Data From A Specific Cell Upon Selection Changes
I'm trying to do is definetly simple to a lot of you, but I'm struggling on how to get started. I attached a workbook that clearly shows my work! I'm almost there but not quiet. Basically the user will be able to make a slection that will be used to lookup values from a different sheet. Each selection triggers a ranking number at the bottom (red pattern) in the worksheet. Now I would like to capture all scenarios and display the ranking.
Macro: Paste Cell From Specific Files To 1 General File
i have about 80 files that all have the same structure. I also have a general excel file that I need to fill with values from each of the 80 files. I'd like to use a macro that can be applied to each of the 80 files at a time (or at the same time, if that's possible) so I can copy the cells (only the text, not the formula) I need from each individual file to the general sheet.
each file is:
I need to copy the "123" to a cell in the general sheet, "456" to a different cell in the general sheet and so on (to be able to choose which cell in the general sheet I am copying to).
Macro Button To Change Background Color Of Specific Cell
My boss wants a spreadsheet that has multiple buttons on it that will change the background color of a specific cell to four different colors. Example:
Text written in Cell B3, Button in Cell A3 that will change the Background color of Cell B3 to either Green, Yellow, Red or Blue.
There will be a lot of buttons on this worksheet following the same format as above. I don't want to change the value of what is in the cell, just the background color.
Macro Create A Hyper Link Once Data Is Entered Into Specific Cell
Is it possible to have a macro create a hyper link once data is entered into specific cell, i have a multi sheet work book used as a stock card system.
Each stock item has its own worksheet and the product code is entered in to cell E3
(which in turn has a macro in it to change the sheet name to match the product code).
the macro also inserts a row of info into row 5 of another sheet used as a summary sheet ( CONTROL.SHEET or SHEET 4) using copy and paste link.
i need a macro to generate a hyperlink in cell D4 of the control sheet between the row info and the matching product code sheet ( the product code is displayed in cell E4 of the control sheet.
I only input one item at a time and then manually cut and insert the row info into the stock list on control sheet. so every time i input a new item, the row info is always in row 5 of the control sheet.
Minus Number From Cell And Result In Specific Cell And Specific Column
I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)
I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)
That Takes From Manual Sheet The Number In Specific Column And Multiply It By The Percentage In Sheet
I'm trying to create a formula that takes from "Manual" Sheet the number from colume G2 and multiply it by the percentage in sheet "AllocationRule".
My formula currently is =Manual!$G$2*AllocationRule!$B5.
What needs to happen is that the total number in "Manual" needs to be distributed evenly in 4 rows by the percentages allocated in "AllocationRule".
Right now I can't copy my formula over to the sheet because the "AllocationRule" should stop at B5 and not go further and the G2 from "Manual" should not change for the percentage allocation but should change to the next row for the next month.
And then after I've done the calculation I want the LOB in "AllocationRule" to be displayed in the LOB in "H1913_H1914" but I'm not sure what formula to use.
Macro To Find Required Data Than Copy/paste In Specific Cell Address
I want to copy some data from internet and paste it in to worksheet location Range A1:A30. the data look like following information.
LocationKuwaitP.O.Box:4819 SafatAddress:ShuwaikhTel:-22253580Fax:-24343645Category:CONSTRUCTION COMPANIES
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
Macro-Copy&Paste Fixed Data Ranges Into Last Empty Cell Of Specific Column
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MAIN DATA (columns A-D)
Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN)
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Macro To Link Cell To Sheet & Cell Stated By User
I have a macro that inputs a sheet and cell from the user. when the macro tries to make a formula it outputs =data!'AE3'. I need it to output =data!AE3
Dim Sheet As String
Sheet = InputBox("Take Data from where?")
Dim startcell As String
startcell = InputBox("Start Cell?")
ActiveCell.FormulaR1C1 = "=" & Sheet & "!" & startcell & ""
Macro To Run When A Cell Changes On Different Sheet
I am tring to write a macro that will hide certain columns on sheet2 based on the value of cell a1 of sheet1. I have been able to get it to work when the input cell is in the same sheet. What I need for example is if someone enters 1 into cell a1 on sheet1 then on sheet2 the macro will hide column c to f. If they then enter 2 into cell a1 of sheet1 then sheet2 will unhide column c to f and hide column g to J.
Macro: Copy Cell To Another Sheet
I dont now, but the code for copy info between sheets dont work
Sheets("SalGrpLibro"). Cells(1, 5).value = Sheets("Formato Permanentes").Cells(2, 2).value
and show error Range property. and this code is ok but is so many lines
Macro: Insert Sheet & Name As Cell Text
I have a workbook with single sheet called Fronpage. I want to insert a new sheet and rename the sheet based on the character value user specified in R1C1 in the Frontpage, and also would like the new sheet to be the last sheet in the workbook. I have tried to use DDE, and also Macro recording to do it. It didnt work out. Can anyone have any code to do it ?
Specific Cell To Run A Specific Formula
let say in cell A6 i have a list
I can pick one of these. If i pick Cash then i want a specific cell to run a specific formula. depending on the item chosen.
So in cell A6 is the list.
in cell B6 an amount will be place and in C6 another amount will be place. the number for c6 will range from a -number to a +number.
But D6 looks to see if B6 meet the requirements for MTT, SnG or Cash depending on which item was selected from the list. and uses the formula below with $c$3 changing from to either $D$3 or $F$3 and comparing the values for the chosen item. the formula changes would look this
=IF(ISBLANK(C6),IF(B6>$C$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
=IF(ISBLANK(C6),IF(B6>$D$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
=IF(ISBLANK(C6),IF(B6>$F$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
Macro - Rename Only & Sheet... & Tabs With Last 8 Characters From Cell
I pull an excel sheet from a database each day that gives me sales data for different products sold. The way the spreadsheet comes from the system, the first tab is named "Document Map" and lists all of the products, and each product then has its own tab but they're generically named (Sheet1, Sheet2, etc.). The name of the product is always in cell T8, but the name itself is only the last 8 characters of that cell.
What I'm hoping to accomplish with a macro is two things:
1) Retrieve the last 8 characters from T8 in each tab, and name the tab with those characters (same effect as the formula "=right(T8,8)").
2) Ensure that this only occurs on tabs with the word "Sheet" in the beginning. Depending on the day, there could be any number of products and they each get their own tab, so I was hoping to be able to get the macro to only work on sheets where the first 5 characters are "Sheet" regardless of the number after that.
Reference Cell On Non Activate Sheet Macro Code
I have a UDF in Cell Sheet1!A1 that inputs some ranges from Sheet1 and calculates a number. Then I have a sub that calculates the value of this function with Evaluate(Sheet1!A1.formula). However, this only works when I am in Sheet1. Otherwise, I get the wrong calculation. How can I avoid this? I will post the code in the open source forum as it otherwise is quite good and automatically resizes array functions to their proper size.
VBA Add New Sheet With A Specific Name
The problem is step happens multiple times, and the default sheet name increments (Sheet1, Sheet5, etc) each time.
Current code looks something like this:
Sheets("Sheet5").Name = "Fancy New Sheet"
Is there some way to
Sheets.Add Name = "Fancy New Sheet"
Or define a variable that grabs whatever the name of the new sheet is, then renames it to something specific?
Link To A Specific Sheet
how I can use a hyperlink to access a particular sheet of another workbook? for eg, I have 2 workbooks, A and B.' A ' has a set of 15 hyperlinks. When I click the first link in 'A' it should open sheet 1 in 'B' and when i click link 2 it should open 'sheet 2' in 'B'. How can I do that?
Macro - Repeat Macro A Specific Number Of Times
I have created a macro that copies the outcome of a specific calculation (that is driven by random numbers) and pastes it (as values) into a seperate table. It then recalculates the sheet, copies the new outcome and pastes it into the same table at a row beneath the previous one.
However, I would like to be able to determine how many times this loop is repeated (i.e. how many rows of outcomes will be generated) without having to change the macro each time. Is this possible? Maybe by just linking it to a cell where the number of outcomes/repeats is specified.
Removing A Specific Sheet From A Loop
I have got an Excel program that retrieves colunms of data from a Database using MS Query on the first sheet of the workbook. I then have some code that abstracts the data from from the first sheet into each seperate sheet depending on the number value in the Family Groups column. This is all done using a loop.
This all worked fine until I tried to insert another sheet which contains a couple of columns of static values which I dont wish to be affected by the VBA loop. when I now run the code it overwrites the contents of this sheet.
May question is how can I put some code into my loop to prevent it from updating this sheet in the work book?
Run All The Sheets Of The Workbook Except Specific Sheet
I have a workwook with multiple sheets. One of the sheet name is "ABC".
I have a macro which does a particular task. I want that when the macro is run, it should run on all the sheets of the workbook except sheet "ABC".
Here is whar I have tried:
For Each ws In ActiveWorkbook.Worksheets
If ws.Name ActiveSheet.Name Then
Search In Sheet In A Specific Column
I have been working on a spreadsheet with 3 sheets and have done everything except the last function which I just can't work out.
Data is entered on the first sheet in a list with an item number, description, dates etc and then finally, if they are a certain type of item, a variation, a 'variation number' in a column.
The next sheet is then called 'variations' and here starts my problem. I want to have a formula that picks up if a variation number has been entered on sheet one in the 'variation number' column and if so, add that item into this sheet, in order.
So to summarise, I need sheet 2 to search on sheet 1 in a specific column for numbers 1-30(ish) for a series of items.
I then need sheet 2 to list each of these in order, copying over each item that goes with the number from sheet 1 in the same format.