I have a workbook with 2 worksheets, A and B. Sheet A contains source data and sheet B a pivot table of this data. I want my user to click on a cell within the pivot table,click a button that runs a macro to find the instance of this value within Sheet A. I did record a macro but it did not work.
View 3 Replies
How to find the column based on my active cell...if my active cell is in A1 then it pops up saying your in column A.
View 3 Replies View RelatedI would like to find a text string in a document, move the information in the cell to the right of this to another cell (say A1).
View 8 Replies View RelatedI would like to create macro, where it would on macro run copy text from active cell and find that value in another sheet (in column H) and select that cell.
What I did is this:
I am trying to loop through column A and I want to store in an array where I find "App" within the cell value. I am trying to find "App" but will store the whole cell value in the array. I could not figure out the Find method, so I tried the MID function but am having no luck.
Here is my code:
Code:
Sub Arraytest()
Dim arr As Variant, lastrow As Long, i As Long, f As Long, l As Long
f = 0
lastrow = Sheets("Sheet1").Range("A" & Rows.Count).End(xlUp).Row
ReDim arr(1 To 1, 1 To lastrow)
[Code] .....
I frequently review DAT files. These DAT files use a variety of characters as delimiters. I'm trying to devise a macro that will perform a text-to-column operation, using the content of a specified cell as the delimiter.
Here's my code, which uses - (ASCII 0254) as a delimiter:
Code:
With Sheet1
Range("A1", ActiveCell.End(xlDown)).Select
Do
[Code]....
Instead of having the delimiter hard-coded, I'd like my macro to use whatever character I enter into Sheet3.Range("i5") as a delimiter. That way, I can easily change my delimiter character as necessary.
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies View RelatedI have some dynamic named ranges in sheet1, and in sheet2 I have data validation dropdown list which has the names of all the DNR's in it.
What I want it to do (in sheet3, no less) is for the user to be able to pick a named range from the dropdown list, and have a particular column in sheet3 then display that entire named range.
I have made a 'data' worksheet which is the source for the data validation in sheet2. Each item in the list identically matches the name of each of the named ranges. I was hoping to be able to use some form of =INDIRECT but alas, no such luck.
So it's almost like a copy and paste function I'm after, where:
If you pick "Schedule_From" out of the DD-list, then DNR 'Schedule_From' is what is pasted in Column B in Sheet3.
DON'T want to use a PivotTable.
I am just learning to use VBA and this may be the most simple task ever, but I can't figure it out. I've searched for all of the keywords I can think of, but can't find a solution...
I have a list of names in a sheet. Other columns in this sheet contain data like amount charged, amount paid, etc. This sheet must be manually updated (because the other program won't export the information I need) periodically to ensure proper billing/payment application in the original software (all transactions are handled by other people that I don't trust).
I sort the list so that the all names that are the same (ie John Doe) are together.
A short example list looks like this:
Jeremy Apple
John Doe
John Doe
John Doe
Jimmy Kravitz
Jimmy Kravitz
In updating my sheet, I set up a macro that will input todays date in one of the columns for all occurences of that name (so, every row that contains John Doe in column B, column V will have todays date in it).
Currently, in order for my macro to work properly, I have to manually make the activecell the first occurrence of 'John Doe'. When I'm ready to update 'Jimmy Kravitz', I have to select the first occurrence of 'Jimmy Kravitz' and so on.
Here's my question - Is there a way to use a VBA macro to find the first occurrence of 'John Doe' (and automatically 'know' which name I am updating)? Basically, I need a macro that will take the information that is in the cell in column B in the active row, find the first row that has that same name, and make that cell (column B) the active cell...
I have a list of items in cells b2 to z2. I want to display the contents of those cells in b2 dependent on what the active cell is. For example if the active cell is in column b I want a2 to show b2. If the active cell is in column C I want A2 to show C2, etc.
View 3 Replies View RelatedI need to find a specific text in column D of sheet2 of my worksheet and copy that row to sheet1 to the last blank cell in column B. The macro should continue to search for the next text and copy rows only if there is active cells in the range column A : C of sheet2. I need a VBA code to do this.
View 5 Replies View RelatedIf i have a range say E12:O12 and want to find the last cell before blank, lets say it finds m12 as the cell with the value before blank. then with m12 it needs to determine weather row 11 in the same column has Text either "S" or "F" if "S" then m12 = t if "F" then m12 offset(1,-1) = t. And just to make things more difficult i need the range E12:O12 to step 2 as well until it gets to E208:O208 .Noting that row 11 never changes and will always have either an "S" Or an "F"
and also t = time()
I thought this was a pretty simple formula but I am having difficulty creating it. I am attaching a little test spreadsheet. Sheet 1 is where the data will be entered. The Reimbursed column has a drop down choice of yes or no. The next 2 columns are the cost of registration and the cost of accommodations. On sheet 2 is where I would like the formulas. So in cell A4 I would like a formula that says if B3 on sheet 1 is Yes populate this cell with the contents of Cell C3 only, B4 of sheet 2 would then be B3 if A3 on sheet 3 is Yes and so on with the Not reinbursed if sheet 1 the Reimbursed column is no.
View 3 Replies View RelatedI am just learning VBA. I need to move to a cell location that is named in a range. As follows:
The cell "Sheet2!A1" has a formula that results in "Sheet1!B3". I would like my VBA code to read that cell and select Sheet1!B3. When using something like:
Application.GoTo Range("Sheet2!A1")
I end up of course at Sheet!2A1. I want to end up at Sheet1!B3 or wherever the cell reads at the time the code is read and operated on.
I have a range of amounts in Sheet 1 from F7:Q13 and im using the find method to search for the active and non active values in the cell. Which means that if there's a value in the cell it will transfer the value in Sheet 2, if nothing is found in the cell the cells in Sheet 2 will return as nothing or null.
I think the problem lies on the FindWhat variable. Im getting a compiled error which im not sure what is it.
I've attached the spreadsheet so you get a better idea of the problem that i encountered.
I use the Index/Match formula to find the last active cell in a column quite effectively.
I'm wondering though how to adapt it to find the second last active cell?
EX: Last active cell formula:
Data:
a 10
b 11
c 0
d 12
I would like to be able to Click a Cell or Button to enable me to go from the 'VIN ENTRY' worksheet to the 'Date Completed' worksheet and then be able to enter the Date in the Correct cell cooresponding to the last 6 digits of the VIN. I have included the File
WorkSheet 'Date Completed
ENTER Last 6 Digits of VIN:K43070Click
Here to Enter Date Completed
WorkSheet 'Date Completed
Colum A Column B...................
I have a code which looks at sheet2, useing a date value, and returns the Vent value and the Tanker value to sheet1. Because of the file size I have pasted a small section of Sheet2 in the hopes you can see what I am doing. As can be seen my code is not going to work with Offset as soon as the Data fills further down the sheet(every 2 weeks). I need a way to reference the active cells column name (it is a named range) or header name. Both are the same. That is the header name is the same as the name of the range. there is a way to perhaps find the first cell of the column,which I guess would work,but have reached a stale mate with what I've tried so far.
Vent 01Vent 02Vent 03Vent 04
Date3/06/063/06/06n1/06/06
Tanker8248824617606
WhoJ AshJ AshEmptyHarry
Date
Tanker
Who
Private Sub DueCommandButton_Click()
Dim strRecordID As Range
Dim rngData As Range
Dim Vents2 As Range, Tanker_Result As Range
Dim wsheet1 As Worksheet, wsheet2 As Worksheet
Dim Column_Name As Range
Dim ActiveCell As Range
Set wsheet1 = Worksheets("Sheet1")
Set wsheet2 = Worksheets("Sheet2")....................
I am having problems getting a VBA search function to work... this is the code I am currently using with very little success:
Sub FindApp()
Selection.Copy
Sheets("Applications").Select
Cells.Find(What:="ADT32109", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False).Activate
End Sub
What I am trying to achieve is to copy the contents of the active cell in the first sheet and find it within another sheet but I am unable to get the What:= section of the code to take the value of the copied cell.
Search a worksheet for a user defined text string, and have excell return the contents of a predetermined column in the same row in which the text string was found.
A prepopulated worksheet has the text "gold" entered in cell T278.
1. user searches for "yellow_metal"
2. Excell finds "yellow_metal" in row 278, say in cell A278.
3. Excell then goes to predetermined column (programed as part of macro or VB), say "T", and returns the text contents of the cell in that column, T278 in this example.
4. Excell returns "gold"
I've got a code that does what I want it to do, but I have to select the start point manually becuase it's position varies on different documents. It's usually around row 650 out of 1200, but the cell I want to start the macro at always contains the word ELECTRONIC. What I would like to do is modify my code so that it finds that cell itself and then runs the rest of the code. I'm not very good with VBA, but I've tried a few things like Dim LR-2 and using that but I get error messages about duplicates.
Here's my code
HTML Sub Macro1()
'
' Macro1 Macro
' SALES ORDER FORMAT
'
'
I have a list of names in coloum D of a worksheet called "Trial", I have another worksheets called "Usage" with this list. I need a macro which can search the name written in Trial worksheet in Usage and worksheet, and activate the found results in usage worksheet.
I cannot use vlookup formulae here as "trial" sheet only has last names, which "usage" sheet has full names.
I need to write a macro for find a value in all sheets in current workbook. The problem is put like this: I have to write a ID (for DVD archiving) in a column but testing that generated value is unique in entire workbook (I have multiple sheets, organized by movie genre). I can use find method and testing for value <> Nothing but it always said that the value is present (the current cell value); there is any method to omit selected cell value? I think "After:=" parameter can do this but I don't figure out how to handle with it...
View 4 Replies View RelatedOn Sheet2 I have a table where I want M2 to do the following:
1.) Look at cell A2 where the name "John" is and B2 where the name "smith" is.
2.) Look at sheet1 and look in B2 and C2 for "John" and "smith"
3.) Once it matches the name, place the contents of sheet1, cell I2 into sheet2, cell M2.
So in short, match the name on sheet2 to the name on sheet1 and return the number in I2 to M2 on sheet2.
Maybe combining the persons name in to one column would make it easier?
I want to have a macro that will look at a few cells say A1 & A2 and then use the contents of the cells say 1Q07 & 2Q07 respectively to do a find and replace find 1Q07 and replace it with 2Q07. I want it to use the contents of the cell and not just the text because the contents of the cell will change each time used. I tride to do it here but I dont have it yet. It doesnt seem to pass the value to the variable and the variable doesnt seem to do the find and replace.
Private Sub Update_Click()
Application. ScreenUpdating = False
Dim quarter As String
quarter = CStr(txtquarter.Text)
txtquarter.Text = CStr(quarter)
Sheets("Income Statement").Select
Dim oneq As Single
Dim twoq As Single
Dim threeq As Single
Dim fourq As Single
Dim fiveq As Single
oneq = ActiveSheet.Range("A2").Value
twoq = oneq - 1
threeq = twoq - 1
fourq = oneq - 4
fiveq = oneq - 5
Need to find the first cell above the active cell containing any sort of variable (integer, string value, cell fill colour, named range, etc...).
For example, a column contains multiple integer values between 1 and 10. I would like the macro to "locate" a specified value, say 3. Ideally the macro will select the first cell matching this criteria, located above the active cell. Once located, the resulting cell will be added to a range to be copy-pasted to a new worksheet.
I am planning to use this code for various applications in a workbook I am creating. At present the code will be used to locate string values, and cell fill colours. It is also likely this will extend to other types of variables in the future.
I've found information relating to the find function, but nothing specifically to find the first result above the active cell.
I have 2 columns of data
column A = weeks (A2:A50) i.e. P1W1, P1W2, P1W3....P12W4 etc
column B = headcount (B2:B50) i.e. 5, 7, 5...10 etc
Essentially my criteria is "looking for last week and give me headcount" i.e. my lookup criteria is P7W5 ....however if P7W5 has no data, i want the lookup to go up or offset to the row above (it may be one to 4 rows above)....
I want to use one button with a macro attached to it to locate data on a different worksheet. So I highlight the "activecell" I want to find on the other spreadsheet then click on the button and it goes to the correct spreadsheet and filters for the data I want (relevant to the activecell).
View 6 Replies View RelatedI have data arranged in cells A1 to Z1 as Name1, Amount1, Name2, Amount2, Name3, Amount3, etc. Is there a formula that can determine the name that corresponds to the maximum amount in the row?
View 7 Replies View RelatedI have a worksheet where columns C, F, I, L, O record scores within a league. Each row records a persons score in that league and there are two rows per person recording their score and their handicap score. So Person A would be on rows 3, 4, Person B on 5, 6 etc. The persons name is recorded in Column B.
What I would like to do is to have a cell(s) elsewhere in the worksheet which show the highest score in that league and display that score and the name of the person who achieved it. This ideally would need to be done for the highest score and the highest handicap score.
For the life of me I can't even begin to work out how to do that or even know if it is possible in Excel.
So to clarify, lets say the highest score is in cell L7 and the highest handicap score was in M3. The cell(s) containing this formula should then show the name in B7 and the score in L7 and below it the name in B3 and the score in M3.
