I've got a spreadsheet where i need the user not be able to save the workbook if there is a blank row in a range of task which run from A4-last cell with data entered.
I would like it to say that "the row will be deleted, please amend"
After the check has been completed or varified it saves
I am using the following code to display a range of cells from a single column (A1:A10) in a message box, with each cell value on a seperate line.
View 7 Replies View RelatedCan I display the contents of a range of cells in a message box?
View 4 Replies View RelatedI have a work book with several (couple of hundred) buttons, which when clicked display the contents of a range of cells in a message box as shown below;
View 4 Replies View RelatedI use 2010 and I will try and I need to complete a relatively simple project that I am working on.
I have a range of cells, "D7:Q30". This range has numerical values that are updated automatically (every cell within the range has a numerical value) from an "old value" to a "new value". The refresh rate is not constant, that is the values may change at any time depending on when a value changes I think it is called "pushed" data. Once a value is updated ("new value"), it stays at that value until one of the updates changes its value (and then it becomes the "old value").
I would like a message box to display the following EACH TIME A CELL CHANGES ITS VALUE when the NEW updated value is LESS THAN the OLD value:
"B51, B52, **5, has a changed value from "old value" to "new value".
The ** above in the message box represents the following: If for example cell F23 changes, ** in the message box should be the value that is in cell F5. If Q10 changes, the ** value in the message box should be Q5. It will always be the value in Row5 but have a different column depending on where the change is detected.
B51 is the text value in B51..same for B52 (text) etc...these values change depending on what spreadsheet I have open, but will always be in those cell positions. But the values within the range D7:Q30 are always numeric.
I have searched and trying to manipulate various formulas with no success...
I am entering an AverageIF formula into cell J15
I want to calculate the average of the folllowing ranges cells J5:J8,J10:J13
However, I want the cell J15 to display blank if cell J14=0
On reflection I am unsure an AverageIF formula is even correct.
How can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.
View 5 Replies View Relatedin column A of a spreadsheet a date needs to be entered manually, however i cannot have it so it can be backdated or a weekend. I have seen a message box pop up if you try and enter a date prior to today saying , Please enter todays date , then gives you an option Retry Or Cancel. But im not familiar with this function.
Is it possible to have this if a date is enter and is either a weekend or a date less than today ?
Is it possible to format the message box display? I need to display currency format, how can this be done?
View 3 Replies View RelatedI want to sort the information that will be displayed in a message box just before it's displayed, is this possible. I can't do this in the worksheet because it would conflict with how I have the worksheet sorted already. Here's the last portion of the code that will display what I want in the message box. I want to sort by the... Requested on: " & mpNames.Cells(i, 2).Text & " this column has a date and time in it and I want the sort to use this information to sort the message box.
If .Cells(i, "A").Value = mpTestName Then
mpMessage = mpMessage & mpNames.Cells(i, 1).Value & _
" (Requested on: " & mpNames.Cells(i, 2).Text & ", Leave type: " & mpNames.Cells(i, 3).Value & _
", Start Date on: " & mpNames.Cells(i, 4).Text & ", End Date on: " & mpNames.Cells(i, 5).Text & ")" & vbNewLine & vbNewLine
End If
Next i
If mpMessage "" Then
MsgBox mpMessage, vbOKOnly + vbInformation
Else
MsgBox "Blah Blah Blah Blah Blah Blah Blah Blah", vbOKOnly + vbInformation
End If
End With
End Sub
When the user enters a date (A1), that date is cross-referenced with a database to determine 1 of 3 results, in which the results are displayed in A3 as follows - Date out of range. (value="DOR"), No records exist. (Value="NRE"), Records exist. (Value="RE").
Once the date is entered and the corresponding value determined, I would like to have a ppo-up message appear with options:
Date out of Range.
Message: "Date falls out of range of operating season. Please re-enter." ** I think I can use validation to take care of this. **
Message "Would you like to import data?"
Yes - open external application
No - default A1 to current date and await user input
Records Exist.
Message " x Diamond Records; y Field Records; z Court Records " where x y z are numeric values based on lookup from the referenced database
Message "Proceed to data"
Yes - takes used to next new worksheep
No - default A1 to current date and await user input
How / where do I code this to activate after the user enters a valid date?
I am looking for is VB code to firstly have a message box with an input box on (that bit i can do). The text and number put into the message box is then used to search the table for the information that relates to it.
The ideal would be for the code to find the data and then copy it either to the clipboard or to a section of the workbook.
The tables I am searching can be put into which ever format is easiest. Below is an example table;
A B C D E
1 A.1 Side Road Correctly Left
2 A.2 Hit in Rear Left
3 A.3 No known Police ref
4 A.4 Vandalism
code that would generate the 'Not Found' message
I have a date in HC4, which appears in column 112, so cannot understand why it finds nothing ?
Sub Macro6()
Dim C1 As Range
Application.Goto Reference:="CURRENT"
Selection.Copy
Set C1 = Range(Cells(4, 8), Cells(4, 200)).Find(Range("HC4").Value)
If Not C1 Is Nothing Then
C1.Offset(1, 0).PasteSpecial Paste:=xlPasteValues
Else
MsgBox "Not found"
End If
Range("A1").Select
End Sub
I have been using the GetOpenFileName method and a message box to return the filepath of a file and saving the filepath in a variable called Filepath. This worked just fine.
What I want to be able to do is display the the file path at any time in a message box, but not sure how to do this. I tried displaying the message box in a form and was going to look for some way to call the form, but the form does not return the message.
My code for this is as follows:
Module 1
Sub getfilepath()
Dim filepath As String
filepath = Application.GetOpenFilename(FileFilter:="All Files (*.*), *.*", Title:="Select a file")
UserForm1.Show
End Sub
Userform 1
Private Sub OkButton_Click()
Unload UserForm1
End Sub...........
I am just having a problem where at the end of my macro, the macro is looking for a value in a cell and there is no value at the end of the game for it to paste so I get an error. Instead of getting an error, I would like the macro to display, "You win!", if cell e1 is =1, "You lose!", if cell e1 is =2, and "tie game", if cell e1 is =0.
View 9 Replies View RelatedI'm a novice at VBA and I want a dialog box to display a welcome message once the user opens the excel file (worksheet). I can write the code to display a MsgBox but I can't make it to display the MsgBox once the file is open. I'm learning VBA by trial and error.
View 2 Replies View RelatedI have 4 columns in a worksheet.
A B C D
number type date name
I am using an input box to enter the value of column D. After the value of column D is entered, I want a message box that displays the corresponding data in column A and B. with the vba coding?
creating a .Find code to search a range on a sheet and then display each result seperately in a msgbox. An inputbox will be the value .find searches the range for.
the msgbox needs to be a vbyesno
VB:
'SEARCH CODE
Dim myItem As String, myRNG As Range, NewLoc As String
Dim Found As Range [code].....
I need it to display the message if findstring has been found more than once (i.e Twice)
View 6 Replies View RelatedI need a program for my user form such that it displays an error message.
I have created an user form with employee name ,task and remarks.
I need a program in such a way if an user clicks the "submit" button without entering all the fields in the user form, an "error message" should be displayed.
The submit button has to work only if all the fields are filled by the user.
I have a spreadsheet and a macro that creates a new sheet and enters some data into the sheet. The user gets to make some changes to the created sheet and then prints it out. I was wandering if there was any way to have a message coming up every 10 minutes remindnig the user about the new sheet untill it was printed out and then the warnings would stop. Could anyone sugest a good way to do that?
View 7 Replies View RelatedI want to display a message box to user upon opening a file. When the message box is displayed I want to display two buttons.
Button 1 = “Continue”
Button 2 = “Cancel”
If the user selects button 1 (“Continue”), I want the file to remain open and the message box will close.
If the user selects button 2 (“Cancel”), I want the file to close.
There is one condition that must be met for the “Continue” button. The message contains some disclaimer information. When the message box first appears on the screen, the “Continue” button is disabled. To make the “Continue” button active, I want to add a Check Box to the Message Box with a caption that reads “I agree to the Terms and Conditions”. Once the user places a checkmark in the Check Box, the “Continue” button will become active.
I have a workbook that can open a URL into IE when a project number is entered in an input box.
What I would like to happen is that if the project number entered does not have a URL against it and the value is #N/A, then the message box will display "Project does not exist". However if the number does exist, I want a different message box to be displayed which is a yes/no box.
The code below is what I have tried which works fine if the cell value is #N/A but when it is not it throws an Run-Time error 13: Type mismatch
Code:
Sub SearchPidsMessageBox()
Dim Answer As String
Dim MyNote As String
[Code]....
How do I combine these formulas for one cell?
=IF(H16170,"Check your Entry","")
=IF(I16215,"Check your Entry","")
=IF(J16190,"Check your Entry","")
=IF(K16240,"Check your Entry","")
If any of these four cells are entered incorrectly I just want the message displayed. I put this formula in the cell I want the message displayed:
=IF(H16170,"Check your Entry",IF(I16215,"Check your Entry",IF(J16190,"Check your Entry",IF(K16240,"Check your Entry",""))))
That works except "Check your Entry" is diplayed until all four cells are filled. I don't want the message displayed with a zero value.
I have 4 textboxes that will display the percentages, and i want to create a pop-up message if the 5 textboxes value doesnt add up to 100%.
View 9 Replies View RelatedI m trying to input values of an protected cell and an error dialog will display. my question is how to invoke that error dialog through vba? i have attached that error dialog for your perusal, see .jpg attachment
View 4 Replies View Relatedi have a routine which loops through a range looking for past dates and when it finds one display the result in a message box in my testbook i only use 25 rows but it gets annoying having to click ok for every find....is it possible to collect all results and display them in the message box at one time?
Private Sub Workbook_Open()
Dim Mycell
Dim Rng
Set Rng = Sheets("Sheet1").Range("B1:B25")
For Each Mycell In Rng
If Mycell.Value < Date Then
MsgBox Mycell.Offset(0, -1).Value & " Is Overdue By " & Date - Mycell.Value & " Days, Take Action Now!", vbOKOnly, "Tasks Overdue"
End If
Next Mycell
End Sub
I'm trying to generate a message box when a lookup cell returns the #N/A error value.
The lookup formula (=VLOOKUP(O8,Prod_Lookup,6,FALSE)) is in a "helper column" and returns a value of 0 if there is no entry in the lookup source sheet, but returns a value of #N/A if a non-matching date is entered in the active worksheet.
I have the following, but need some help in getting it work correctly. At present, it doesn't trigger the message box to pop up.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim Prod_Val As Range
Dim note1 As String
Set Prod_Val = Worksheets("C_Data").Range("P8:P7000")
note1 = "Brazer PPM cannot be calculated because the Daily Production Count" & vbLf & _
"has not been entered for this date." & vbLf & vbLf & _
"The Daily Production Count must be entered prior to entering the daily leak data." & vbLf & vbLf & _
"Upon clicking the OK button you will taken to the Production Count sheet to enter the data."
I want to display a comment/note that is always visible however:
*The text in the comment should change "only when" the user of my worksheet "clicks" on a specific cell in the worksheet;
*I do not want that a comment appears/disappears/ changes when the mouse moves over any of the cells
*I do want that the same comment/note is used to display different text when the user clicks on another cell in the worksheet
*I do want that the user can position this comment on his screen where he wants it to be.
I'm trying to add a message box that will appear when you activate a worksheet in a workbook. This is what I have, but it's not working.
Private Sub Workbook_SheetActivate(ByVal Sh As Object)
If Sh. Name = "P2 Forecast" Then
MsgBox "Ensure you have locked your forecast on the Sales Forecast Tab prior to working your P2s"
Else
End If
End Sub