I have the onerous task of dividing up a series of steps in one cell into multiple cells. I tried the text to columns utility, but it only delimits once, not multiple times. Below is a data example:

"1) Load App 2) Login using Administrator Access details . 3) Click on icon 'Admin' on the right hand side of page. 4) click on subcategory 'Administration'"

"1) Load App 2) Login using Administrator Access details . 3) Click on icon 'Admin' on the right hand side of page. 4) Click on subcategory 'Administration' . 5) Click on any Organization name from 'Organization' section in the list. Or click on 'Add Organization' icon in section 'Organization' . 6) Validate field 'Parent Organization' in 'New Organization' or 'Edit Organization' form" "1) Load Documoto. 2) Login using Administrator Access details . 3) Click on icon 'Admin' on the right hand side of page. 4) Click on subcategory 'Administration' . 5) Click on any Organization name from 'Organization' section in the list. Or click on 'Add Organization' icon in section 'Organization' . 6) Validate field 'Tenant ERP Accessible' in 'New Organization' or 'Edit Organization' form"

1) Load App 2) Login using Administrator Access details . 3) Click on icon 'Admin' on the right hand side of page. 4) Click on subcategory 'Administration' . 5) Click on any Organization name from 'Organization' section in the list. Or click on 'Add Organization' icon in section 'Organization' . 6) Validate field 'DMZ license key expiration period ' by click on checkbox or by 'Uncheck' checkbox"

I was hoping that my formula would give me the count number based on the Maximum time (latest time) and the Name field...My result is a 0 instead of 62 (the correct answer).

Suppose I have the following plan number (24) and I wan't to spread it across 12 columns, as evenly as possible but with respect to rounding. Easy enough.. Each column receives 2...

Or say the figure was 24.6 and i wanted to round to 2 places... Easy enough... Each column receives 2.05...

Or say the figure was 24.7 and i wanted to round to 2 places... Easy enough... Each column receives 2.05... But one would be 2.06!

How about the number is 1 and say, the rounding is 0.1? Ten of the columns would be .1 while two others (arbitrarily) would be 0.

I have a large worksheet that I need to make into a quarter of what it is now. Each of the numbers is just inputted, so I was thinking there is a way to divide it all by four.

I need to divide the numbers on sheet 1 column D. This column contains numbers and blank cells so I need to divide by the actual number of cells that contain only numbers. I will be referencing the divided numbers on sheet 2 in a monthly summary format.

I am working an Excell sheet. It have many cells with formula like sum of a range of cells etc.

I wanted to divide a range of cells with the given cell (which is inturn having a formula for sum of a range of cells.) want i wanted is to divide a range of cell values with a given cell whose value (number) is obtained through a formula.

when i do

=100*(v65)/v20 for T65 cell and copy the formula for T66-T106 cell range

it is calculating for T66=100*(v66)/v21 and T67=100*(v67)/v22 ........T106=100*(v106)/v61

what I want is all the cells T66=100*(v66)/v20 ... T106=100*(v106)/v20.

I have dollar amounts that I need to distribute amongst varying numbers of columns and not have have the total distributed be over or under the original amount by any number of cents. When I simply divide the dollar amount by the number of columns, the total of those columns can sometimes be more or less than the original dollar amount by a few cents.

e.g. Dollar # of A B C All Columns Amount Columns Total -------------------------------------------------------------------- $25.05 2 $12.53 $12.53 $25.06 $11.47 3 $ 3.82 $ 3.82 $ 3.82 $11.46 $25.05 divided into 2 columns gives $12.53 in Column A and $12.53 in Column B. Total of Columns A and B is $25.06. Over by a penny.

$11.47 divided into 3 columns gives $3.82 in Columns A through C. Total of Columns A through C is $41.46. Under by a penny.

I know I could simply always add or take away the pennies from one column, but I would prefer the process to be random or formulated in such a way that the Column to which the extra pennies are added to or taken away from differs in order to be "fair to each column".

I have started to use excel again because I need to create a spreadsheet for maintenance hours done on a vessel. The problem I have right now is, how to set a rule to allow only certain multiple of a particular number to appear. For example,

I have a initial cell value where I have to manually insert the total number of hours that have gone by in the vessel. Let us say that this value is 500 hours.

In another cell which is labeled, "Last Completed", it would have to read at how many hours this job was last completed.

I also have another cell which gives you the time interval before the job is performed again. This value is 250.

So if the current number of hours is 500, the last completed date should be 250. (assuming Maintenance was done at 0 hours and 250 hours).

How do I make it so that the "Last Completed" cell would read 250 until I hit 750 hours which at that point should read 500 Hours.

I am using Excel 2003 and have a spreadsheet that lists 1521 fonts. I am using VBA and looping through the list of font names in column 1 and want to put an example of the font in column 2. I am trapping for error 1004 and using Resume Next. This works fine for 480 lines and then it just stops working. No error message or anything. The only thing I could think of is there might be a maximum number of fonts allowed per spreadsheete, but I would have though I would get an error.

I tried to Google this question but cannot find the answer. What is the maximum number of worksheets that Excel can hide within a workbook? I have a macro which hides all worksheets with the exception of the active worksheet and it has never failed. But this morning I had started working on a workbook containing many sheets and when I ran my HideSheets macro a maximum of 14 sheets hides every time. Is it my code (see below)?

how to make vb Scroll Bar “Max” number to be equal to the next empty cell in column A in Sheet25. For example when A5000 cell is empty in Sheet25 then in Property of Scroll Bar Max setting would be 5000 and scroll bar must be at the position of max number.

I've got a table where I want excel to generate the next number. With the following table excel must generate an invoice number (column B). I've got the formula to work correctly until a payment is done as shown in B12,B13 and B14. I need a formula to lookup the maximum invoice number (SC1-0007) and in cell B15 the serial number SC1-0008 must be shown. [URL]

The content of Cell A1 looks like this attccggttaattcccccaaaattt (only a,t,g,c -nucleotides). I want to know the max times C occurs in this cell and the position from the start. like that a, t, g.

here the answer is 5 times and distance is 13 from start.

selecting a range under a condition. I'd like to write a macro to find the maximum value for a certain ID. The number of ID rows (left column) is unknown so can't say range("A1:A5"). Then have the ID and max number shifted to another column. Maybe use 'rows.count' ?

I have two columns of data with a minimum value in the first column and a maximum value in the second column. What I'm trying to get is an indicator in a third column which tells me if a whole number falls at or between the minimum and maximum values. Here is a sample of my data:

I have a table and I want to find out the what is max number for Apple sold on Monday.

FruitsQtyDaysApple20SaturdayApple50SundayApple100MondayApple500MondayApple20 MondayMango50MondayBanana640FridayMango30FridayGet MAX ForApples on Monday500

i really frustrated to my excel file already . every time when i open it and it will appear a error box '' some text formatting may have changed in this file because the maximum number of font was exceeded'' .

My spreadsheet contains a tasklist. It is generally sorted by priority (number); each row also contains a task ID ("T0100"). When I add a new task I need to know the last used task ID so I can assign the next one.

I've tried various built in functions but each expects numbers.

How can I insert in a cell (or display in a msgbox) the maximum text value?

For example, Given the data below I'd like to have show "T0888".

I'm working on a project for my company. We make plastic tanks and for quality control we want to start recording the thickness of the tanks in different areas/zones of each tank.

Attached to this message is an Excel sheet that I've been working on. From "Sheet 1", it records inputted thicknesses into WorkSheet "1098". On the top of "1098", it shows all of the recordings, and just below that are the "10 Most Recent Entries".

Right below the "10 Most Recent Entries", there are formulas to calculate the Min and Max Values. Whenever a new entry is recorded, the selected cells for the Min and Max formulas change. Is there a way to force the cells to always stay the same?

I need a formula to give me a MIN or MAX value only if there is a number greater than 0 in the cell AND not alphabetical letters (as some cells do contain). I need it to return the value for that cell across about ten sheets--I have that part figured out (I think). But I keep getting a #Ref error.