# Dividing Entire Range By A Number

Jul 10, 2006

I have a large worksheet that I need to make into a quarter of what it is now. Each of the numbers is just inputted, so I was thinking there is a way to divide it all by four.

## Dividing Number With Hours And Minutes?

Feb 10, 2014

Cell A1 contains 2, B1=220077:23

In C1 I created a function = (2*1000)/B1, I get error. I want the answer 2000/220077h23m = 0.009087713

## Dividing A Number By 12 With Respect To Rounding

May 23, 2007

Suppose I have the following plan number (24) and I wan't to spread it across 12 columns, as evenly as possible but with respect to rounding.
Easy enough.. Each column receives 2...

Or say the figure was 24.6 and i wanted to round to 2 places...
Easy enough... Each column receives 2.05...

Or say the figure was 24.7 and i wanted to round to 2 places...
Easy enough... Each column receives 2.05... But one would be 2.06!

How about the number is 1 and say, the rounding is 0.1?
Ten of the columns would be .1 while two others (arbitrarily) would be 0.

## Dividing Number And Setting Maximum In Cells

Nov 2, 2013

I am dividing the number. I have for example 20 hours(A1) which have to be divided into 8h + the rest.

So, 8(B2)+8(B3)+4(B4) hours. I have tried few things, but I can only divide it by 8 and it doesn't go anywhere from that.

## Dividing Number Of Steps In One Cell Into Multiple Cells?

Aug 15, 2014

I have the onerous task of dividing up a series of steps in one cell into multiple cells. I tried the text to columns utility, but it only delimits once, not multiple times. Below is a data example:

3) Click on icon 'Admin' on the right hand side of page.

3) Click on icon 'Admin' on the right hand side of page.
4) Click on subcategory 'Administration' .
5) Click on any Organization name from 'Organization' section in the list.
Or click on 'Add Organization' icon in section 'Organization' .
6) Validate field 'Parent Organization' in 'New Organization' or 'Edit Organization' form"
3) Click on icon 'Admin' on the right hand side of page.
4) Click on subcategory 'Administration' .
5) Click on any Organization name from 'Organization' section in the list.
Or click on 'Add Organization' icon in section 'Organization' .
6) Validate field 'Tenant ERP Accessible' in 'New Organization' or 'Edit Organization' form"

3) Click on icon 'Admin' on the right hand side of page.
4) Click on subcategory 'Administration' .
5) Click on any Organization name from 'Organization' section in the list.
Or click on 'Add Organization' icon in section 'Organization' .
6) Validate field 'DMZ license key expiration period ' by click on checkbox or by 'Uncheck' checkbox"

I need to put each step into it's own cell.

## Excel 2010 :: Dividing Numbers By Number Of Cell They Are Found In?

Feb 13, 2012

I am using excel 2007 or 2010.

I need to divide the numbers on sheet 1 column D. This column contains numbers and blank cells so I need to divide by the actual number of cells that contain only numbers. I will be referencing the divided numbers on sheet 2 in a monthly summary format.

## Dividing Range Of Cells With Given Cell Having Formula?

Sep 3, 2012

I am working an Excell sheet. It have many cells with formula like sum of a range of cells etc.

I wanted to divide a range of cells with the given cell (which is inturn having a formula for sum of a range of cells.) want i wanted is to divide a range of cell values with a given cell whose value (number) is obtained through a formula.

when i do

=100*(v65)/v20 for T65 cell and copy the formula for T66-T106 cell range

it is calculating for T66=100*(v66)/v21 and T67=100*(v67)/v22 ........T106=100*(v106)/v61

what I want is all the cells T66=100*(v66)/v20 ... T106=100*(v106)/v20.

## Showing Current Page Number And Total Page Number In Entire Workbook?

Nov 14, 2013

In my header I am trying to show the current page number and the total number of pages in the workbook. So if I have 10 pages in my workbook, page 5 would read "5 of 10".

I have this in my header "&[Page] of &[Pages]". All worksheets with 1 page read "1 of 1" and worksheets with 2 pages read "1 of 2" on the first page and "2 of 2" on the second page.

## Select Range In Entire Column To Fit Range From Another

Mar 26, 2013

i want information on my "Intra-op tab" to automatically populate on my "Tissue" tab. In Column "A" of my intra-op tab i enter case id's, 1 per row, and i would enter a date received under column "D". On my "Tissue" tab, i also enter those case id's under column "A" but i would have multiple rows of the same number. I want that whenever i type a specific case id on my "Tissue" tab, it will automatically fill in the date in column "T", the date that coincides with the case id in column "D" of my "Intra-op Kit" tab.

## SUMIF Last (3) Entries In A Range Rather Than Entire Range

Sep 14, 2013

I'm looking to build a football data sheet on matches played with a column that adds up the last 3 match goals for the team in that row. I've only managed to get as far as adding up all goals for a team in a static date range using SUMIF. I imagine this is more complex and requires some kind of changing sum range that's relative to the cell I'm in.

I'm intermediate at best so any array formulas and VB script would preferred to be avoided if possible.

in the watered down example below, I'd like to add up all home team goals for Hereford in the last 3 matches, therefore excluding the game on the 10th (row 1) giving a total of 5. I'd like this formula to copy down from a13 to future matches and therefore update. So the next week's match will add goals for hereford from e13,e11,e8 but exclude e2, e5. Yes you've guessed it... I'm trying to work out recent team form to predict match outcomes for financial gain...

## Find A Number And Return Entire Row In Another Worksheet?

Feb 20, 2012

I have a worksheet with about 20 columns of info. First of which is a primary key. Call it "Job Number." I would like to create a macro that runs down the list of primary keys searching for a specific Job Number I ask for in the new worksheet, in A1. It then copies and pastes the entire row where it found that job number into the new worksheet starting at row 6.

## Page Number Sheets When Printing Entire Workbook

Aug 21, 2007

I am trying to find a way to print an "entire workbook", but have each of the sheets paged as a group separate from the rest. One workbook typically has up to 20 sheets, with each sheet up to roughly 8 pages. I need each sheet set to show page 1 of 8 or page 5 of 8, not page 22 of 53. Counting and typing in the total number of pages in each sheet's footer is too cumbersome. Also, printing each sheet individually has also been cumbersome when printing to PDF. Are there any other ways to have the "&[Pages]" function only reflect the number of pages within the sheet instead of in the entire workbook?

## Adding Comma As Delimiter Before Number In Cell For Entire Worksheet?

Oct 7, 2011

I do receive invoices from my vendors. They send me an invoice in PDF formate. I am using able2extract software to conver the PDF to excel. It is working great but most of the times my vendors enters the items/Case in the description field. Like the example below:

"Bajri Rotla 11 oz.(24)"

I would like to place a "," in between the last character and begining of the first number. In the above case it will be after "a" (in Rotla) and before "1" in (11). If I can do this then I can apply texttocolumn from excel and use "," as delimiter and separate item name from size and case/Pack. Then can use another "Texttocolumn" and separate size and case/pack. If there is a VBA code that can be written for this it would make my life a whole lot easier.

Following are 3 images that I have copied from actual data.

1. Original PDF invoice data that I receive from my Vendor

2. Image of the excel file before formating. This is the format from "Able2Extract" (3rd party software that I use to convert PDF to excel. Works great!!

3. Converted Excel data sheet. This is the way I want to format the data.

## VBA To Copy Range Of Row Rather Than Entire Row

Feb 16, 2014

This part of my code will copy the entire row to another worksheet within the same workbook.

I now need to modify it so that it only copies columns C through G of the row ... not the entire row. how to modify this section of the code?

Just FYI ... "Bdate" and "Edate" come from an entry made into an Input box. (mm.dd.yy) --- ie. 12/18/13 ..... 12/28/13

[Code] .....

## Range.Resize To An Entire Row?

Apr 29, 2009

Range.Resize to an entire row? I have a range variable:

## Copy Range ISO Entire Row

Feb 15, 2010

I have below macro button code, when i click on any row and enter button, entire row gets copied and paste in other sheet. Can we ammend this formula so that it should not copy entire row, instead it should copy range from row A to row Q only as i need to utilise other coloums which should not get copied to other sheet.

Private Sub CommandButton1_Click()
ActiveCell.EntireRow.Copy
Sheets("FWD Mary Ann").Range("A65536").End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues
ActiveCell.EntireRow.Activate
End Sub

## Counting Number Of Times Specific Month Appears In Entire Column?

Aug 22, 2014

I am trying to create a graph that is conditional on two different columns. The first column is a date column, the second column has various categories. I want to show how many times each category appears per month. This database is continually added to so I wanted the formula to reflect the entire column range.

For example, let say I have 5 categories (Grapes, Apples, Peach, Pear, Banana). Column A would show a date (in a M/D/Y format) and Column B would list the fruit type. I want to show how many Grapes were input in January, February, March, etc. and then move on to show how many apples in each month, and so on.

## Offset Function Not Capturing Entire Range

Feb 9, 2014

My worksheet has 1096 rows of data including headers. I am trying to create dynamic named ranges using the OFFSET function but when I check to see if they are capturing the entire range I see they are not.

Here is my formula:

OFFSET(SiteTrac!\$FA\$1,0,0,COUNTA(SiteTrac!\$FA:\$FA),1)
OR
OFFSET(SiteTrac!\$FA\$1,0,0,COUNTA(SiteTrac!\$FA:\$FA)-1,1)
OR
OFFSET(SiteTrac!\$FA\$1,0,0,COUNTA(SiteTrac!\$FA:\$FA)-1)
OR
OFFSET(SiteTrac!\$FA\$1,0,0,COUNTA(SiteTrac!\$FA:\$FA))

I have tried all four but every time it continues to stop on row 409. I have tried to name different columns and they all stop short too.

## Stop Inserting Entire Row, Only Insert Range

Mar 24, 2009

Right now, the code below is inserting an entire row when it pastes the values in I only want the values to be inserted in Range (A:AJ).

## Create Range For Entire Column From A Cell?

Jan 7, 2014

I have this code:

Modules --> Module1:

Code:
Function Find(strSearch As String) As Range
Dim aCell As Range
Set aCell = ActiveSheet.Rows(1).Find(What:=strSearch, LookIn:=xlValues, _

[Code]....

I've walked this through the debugger. The Find function is finding the "Applicable" column fine (column 2). But how do I convert the aCell object to a range so that Intersect will be true, and will uppercase the cell value that was updated? If I were hardcoding this, I would return Range("B:B").

## Sumif Entire Row Based On Dates Within Range

May 13, 2014

B
C
D
E
F
G
H
I
J
K
L
M
N

2
Rep Names
9/1/2013
10/1/2014
11/1/2014

[Code] ......

Above Sheet name = Monthly Modified Targets
Below sheet name = Sales Stats Comparison

D
E

2
Date Format: MM/DD/YYYY

3
3/1/2014
5/31/2014

What I am attempting to do is to sum up the rows of the reps names based on the dates within the range.

So in this example above
Name1 = 0
Name2 = 55
Name3 = 25
Name4 = 0

when you change the date range it would change the totals.

The results of the example will be placed in
"Sales Stats Comparison" Range K11:K67

I have tried a few different options using index / sumifs / Match (date)

I just can't seem to pull more than one result and it does not sum up all the values in the row based on the date range.

## Catch An Error And Reset The Entire Code To The Very Beginning And Skip That Entire Entry

Jun 5, 2008

I want to catch an error and reset the entire code to the very beginning and skip that entire entry. When I use "Next fieldSheetName" I get "Next without For," error 1004. Searches tell me I have an open block somewhere, but that's not true. Removing that statement (and having the loop iterate as normal) has no error at all.

Dim employeeName As String
Dim fieldMax, x, y As Byte ' Counters mostly
Dim workedHours, fieldSheetName As Integer

fieldMax = 204 ' Row number to stop on in the field time sheet
row = 4 ' Row specification for field time sheet. Begin at row 4 to ignore headers
' and start on the first name. This should not be changed!
Col = 3 ' Start at column 3 then increase by one to start going to next time entry

' RESET HERE!
For fieldSheetName = 4 To fieldMax Step 8 ' This is our MAIN loop. It iterates from 0 to fieldMax, which is 204...........

## How To Select An Entire Range Of Non-Contiguous Cells In A Column

Aug 19, 2009

I recently found this code for selecting a whole column of non continuous cells.

ActiveSheet.Range("a1",ActiveSheet.Range("a65536").End(xlUp)).Select
How can I change the "a1" & "a65536" so it can work and be activecell instead?

## TWo Way Cross Reference Formula Works But Not Across Entire Data Range

May 21, 2009

I have attached a sample of the issue. The formula is found in cell B49. If I enter a gravity of 2.76 or higher in cell B47 I get #N/A in cell B49. Why will it not read any farther over than 2.75. I have been starring at this for awhile now. I might look pretty dumb after someone else looks at it.

## VBA Macro - Copying Entire Row From Selected Cell (within Pre-defined Range)

Jun 21, 2014

I am looking to run two separate macros. I have a project plan and I am looking to be able to select a button whereby on-click, a new row is created within a selected cell. However if the cell clicked is outside of a pre-determined range, then the task is automatically entered at the bottom of the plan. I would like for the copied row to go ABOVE the selected cell and have all of the same formatting as the row below (not the top - as is default in Excel).

The second is going to be very similar but will copy a task category (like a header item) and the first task (row) found below. It will also be copied from below and be inserted above the selected cell.Both macros will clear certain cells, whilst maintaining the contents of others, with formula contained. I.E. Columns C,D,E,H,I,J will be cleared.

## Copy Entire Row By Range &amp; Suppress 'Cannot Edit Links' Message

Jun 25, 2008

I have 10 workbooks which have various calculations and have several links to each other. We use Excel 2003.

For each of these files, I have the following code in the Auto_Open module
Range Range(“TodayComp”) is a date taken form a link in another spreadsheet. It is on Column 3, but the row changes every day as more rows are inserted before it

This sub looks at Range(“TodayComp”) and checks the date on the cell directly above.

If say Range(“TodayComp”) is 6/25/2008, and the cell above is 6/22/2008, it will insert three rows right above Range(“TodayComp”). These rows need to be copied with formulas from the current row above Range(“TodayComp”)

Issue One:
The following code works (it copies the rows), but it takes forever to run, as you can see in bold, I copy and paste each cell, instead of the entire row.
Is there a way to copy and paste the entire row? Remember that I have only a named range to refer to, no cell address as it changes every time.

Public Sub Auto_open()
Update_Dates()
End Sub

Public Sub Update_Dates()
Dim tdy, prev As Date
Dim index, i, j, yr, no_inserts As Integer

Sheets("Comparison Computation").Activate

## Selecting Entire Date Range To Be Lookup Based On Start And End Dates

Mar 6, 2013

I have an excel sheet where I would like a user to enter a start date and end date(say Feb 1, 2013 to Feb 28,2013). And these dates will be able to change to whatever month the user wishes to look up in a specific date range(column A has 365+ dates). This post is closely related to [URL]... but I cannot figure out how to get it to work from my case.

So working off the same worksheet, I have the beginning date in AC35 and the end date in AC36 in which the user enters. I would like the dates that fall in this entire month, including the beginning and ending dates to be referenced when looking for the specific day that contains a value I have in S35.

In other words, I have data in columns A through N. The dates are in column A and S35 is a value obtained from using Max(L185:L526) where L185:L185 is manually selected each time I want a different month. I don't want this to be a manual process of scrolling down the spreadsheet to get the next month.

## Dividing A Time Value

Jan 29, 2009

Need to divide a cell containing a time value (hrs:mins:secs). My timesheets calculates the number of hours on a job and I want to divide this total by the number of components made.

## Dividing And Returning Different Value Than Zero

Jun 24, 2014

How to do the following?

When dividing two cells and the answer is zero then I want to return a different value. I've tried the following with no luck:

=IF(ISERR(\$D20),"*",\$G20/\$G\$22*100)

or

=IF(\$H19,\$G19/\$G\$22*100,"-")

=if a1/b1 = 0 then "*", else return actual value

(N)(%)
64 13
82 16
82 16
2 0 --> change this to * or -
264 52
13 3
507(total)

## Dividing Numbers Evenly

Apr 6, 2009

I have a total at the bottom of my spreadsheet and I want to distribute that total equaly to the missing columns for each month and each product highlighted in green in the spreadsheet. What formula do I need to use to be able to do that?

At the end I want the numbers in each month to total the total at the bottom.