I want to get rid of all these Q's that I already put in many consecutive cells in a column :/
Q2
Q5
Q3
Q10
Q6
Q1
Q7
(...continues)
So I just want to have numbers in these cells. Is there a good way to do that?
I need to change a few hundred cells (one column) where the first letter may be a capital letter to a lowercase letter.
So:
GetAwardfromBid to getAwardFromBid
or
SmallLertter to smallLetter
When I type a single lower case letter into a cell, what formula or conditional formatting should I use to always convert it to a capital letter automatically?
View 9 Replies View RelatedFor the below formula is it possible to replace the B's (column location) with a cell Say Z146 which contains the letter B (or a number if thats easier and someone can tell me the numbers for each column).
When the formula is dragged into the next cell (down) it takes its column reference from Z147 and then my life becomes so much easier.
=IF(INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0))"",INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0)),"")
I have a spreadsheet that monitors whether I have visted a learner in a given month.
I want to have a cell that displays "Yes" if I have visited the learner and entered a V in any of the 31 (July) cells in the row.
I have tried =IF(COUNTIF(g9:g31,"V")>0,"Yes","NO") with no success.
not sure if it i relevant, but the sheet I am using has been formatted as a Table (just to allow alternate light and dark rows).
Is there any way to name cells with same letter but different number?
e.g i need to name the first row A1 to A100.
I have code I am writing where each cell contains 1 of 2 words in in various places of that cell all within column E. I need something to state: If E3 contains "apple" then write "A" in the cell. If E3 contains "Orange" then write "O".
View 2 Replies View Relatedhow to make the cell be with fixed symbol or letter, means that one write 5 only as example then the cell will be 5m ??
View 3 Replies View RelatedI'am trying to add a row of cell that contain a letter befor the number
I need to add-up the numbers and ignore the letter
i need a formula for a sign in sheet for the academy i work at. we have night and day classes of the same sessions, in the planner they are listed as d1, d2 d3 and n1 n2 n3 and so on for each.
so basically im trying to create a formula to quickly ender the d1, d2, d3 ect into the cells on eachpage for the students to sign in for each day it works out to be about 190 calls and 9 diferent classes to you can see why id like to speed this up. problem is i need the number to change not the D and excel want to use the cell allocation.
as you can see from the document i have not attatched, i have created a formula to add in the dates automatically, i would like to do the same with the session numbers or the D numbers, this is one of the shorter courses and has about 190 days
Is there any way of writing a macro so that specific cells are formatted to start with a capital letter and end with a full stop. Can you also write a macro to automatically spell check specific cells?
View 11 Replies View RelatedI have names that look like this:
SmithJohn and i want to seperate into two cells so it looks like
Cell 1: Smith
Cell 2: John
I have 1200 doctor/patient records to input into an excel spreadsheet for import to an online EHR database. I can set up all the normal formulas and formatting but for the life of me not figure out how to create a custom formula to take the first letter of the patient first name and last name and add 6 figures to create a unique patient identifier.
ie. James + Smith+ random 6 figures = JS245318.
In my spreadsheet the first name is under Column 1, Last name Column 3 and the unique number generated in column 4.
Looking for VBA that can change the font size of "•" char(0149) within any string in selected cells.
Also looking to delete the last "•" char(0149) within any string of selected cells.
What would the syntax for these two functions be?
I am working on a spreadsheet for work, and have managed to do everything I need to so far but I need to colour specific letter strings, certain colours within a range of cells (each letter string will only appear once on each sheet)
The strings I will be looking for vary depending on data entered so I will need to cell reference them
The strings that need colouring are in cells with other strings that must stay black (They cannot be separated from other strings due to the nature of the grid)
I need some strings red, some green, and some blue.
These changes should also apply to the whole workbook not just one sheet.
Is there a way to do this with the VBA code.
I am trying to restrict a cell to only be able to input the letter "i" multiple times, almost like a tally sheet, in other words I want the cell to be restriced to one letter, but allow that letter to be entered multiple times.
View 4 Replies View RelatedI want to apply Data Validation to a cell, so that only the following combination of letters and numbers can be entered.
Letter Letter Number Number Number Number Number Number Letter.
e.g AB123456C.
I'm currently doing a survey using an excel workbook that contains multiple questions across multiple worksheets using radio buttons linked to certain cells.
I have around 400 workbooks coming back to me, so what i want to do is take specific values from across many worksheets within each workbook and combine them into a large master table in a seperate workbook.
I've tried using VBA, but not being very proficient at it i've hit a brick wall with that, so i'm hoping that there is an easier way to do it than what i'm currently pursuing.
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.
In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.
CURRENT SHEET
ICODE PRODUCT COMPANY AD1 AD2 AD3 AD4
89PENS ABC STATIONERY CO LLC [code]....
The attached example file may be a better alternative to view this problem.
Worksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g.
AAA blue
BBB orange
AAA round
CCC smelly
AAA elongated
Worksheet 2 I want to show:
A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g.
AAA blue round elongated
BBB orange
CCC smelly
I am having such a difficult time creating a macro that will reduce the 5+hours I have to spend each week manually copying & pasting all of this data. I making an IMMENSE difference in this worker bee's life!
I have a workbook with two sheets (Sheet1 & Sheet2). Sheet1 has license #'s in column A and the state that the license belongs to in column B like this:
COLUMN ACOLUMN B11111Alaska11112Alabama11113Arkansas11114Arkansas
Sheet2 has three columns. Column A has the license #'s, column B has the state that the license belongs to and Columns C shows a line-of-authority tied to that license #.
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty11111AlaskaCasualty11112AlaskaLife11112AlaskaHealth11112
AlabamaProperty11112AlabamaCasualty11113ArkansasLife11113ArkansasHealth11114
ArkansasLife11114ArkansasHealth12345ArizonaProperty
I'm trying to write a macro that will compare the license # and state in Sheet1 to the license # and state in Sheet2. If it matches, append the contents of Column C to the corresponding row in Sheet1.
Here's the thing...Sheet2 contains the entries for all licenses in the company (so this table is HUGE). And there are multiple entries for each state license # (notice how there's two entries above for AK license # 11111 - one for the Property line and one for the Casualty line.
After my macro is run, I want Sheet1 to show all the lines-of-authority on a single line. So if I ran my macro on the above example, after it's run I would have this in Sheet1:
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty Casualty11112AlabamaProperty Casualty11113
ArkansasLife Health11114ArkansasLife Health
how to shift data in a column down multiple rows while in an IF statement. I am assuming you cannot just simply repeat the insert cell formula.
Here is my code - it's ugly but it was working when I just needed it to move down one cell:
lastrow = Range("A2").End(xlDown).Row
For i = 2 To lastrow
Range("B" & i).Select
If Range("B" & i).Value = Range("B" & i).Offset(-1, 1).Value Then
[Code].....
I want my IF function to populate two cells with two values if argument for IF function is found TRUE. Is it possible?
IF(logical_test, [value_if_true], [value_if_false])
value_if_true = return multiple values in mutiple cells (for example put number 8 in cell A2 and number 10 in cell A3 if function is TRUE)
How would I do that? I tried putting IF(logical_test, (A2="8",A3="10"), [value_if_false]) but it is not possbile...
I have attached a test workbook excel 2010 (ignore ref# errors, I've cut the workbook down for uploading purposes) What I would like to do is have a 'Button' on my 'information Sheet' which when clicked would clear certain cells. I have searched the forum but can't find a solution, everyone seems to want to delete rows or columns but I just want to clear certain cells. The workbook will have 11 sheets each named 'caravan 1' through to 'caravan 11' The uploaded test workbook only only has 3 sheets.
On 'caravan 1' (which is slightly different to the other 10) I want to clear the content of cells
B4 & B5
C4, C22 & C41
D4 & D5
E4,E5, E22,E23,E41 &E 42
On all other 'Caravan sheets' I want to clear the contents of cells
D4 & D5
E4, E5, E22, E23, E41 & E42
It would be icing on the cake if it could give a warning such as " are you sure you want to clear these cells" but that isn't really necessary. The worksheets will be password protected, but the cells mentioned above will not be. If it proves too difficult to clear all the cells on all the sheets with one click, then perhaps a simpler solution might be to have a button on each sheet instead
I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:
A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................
I have a column of cells with Customer info and address in each row, that I need to move into multiple columns. ie Cust name, acct #,address, city,state, zip the problem is ALL of the info for each customer is in ONE cell.To be clear, cell B1 has complete name address etc for one customer, B2 has the info for another, B3... on and on. To complicate matters as in the example, there is not a pattern in the lines. the first example shows the info beginning on the 2nd line of the cell, but the 2nd example shows info in the first line. I have tried the text to column fixed width. Didn't work because names and addresses are of varying lengths. Then I tried delimited, but there isn't a common separation between different data. I am using excel 2007. FYI I did go through many many threads and found some that were close to my problem but not close enough to work.
"
JOES TOWING SERVICE [0123451]
123 STREET
CALEDONIA FL 12345
"
"BUBBA / SHOP
ACCURATE AUTO SUPPLY INC [0234567]
21234 HYDRAULIC DR
LOCKWOOD OR 45678
"
Sheet 2 is the problem.
I need to match cells e3:h3 whenver the dates change in in cells c5:c9 and then put there result of cells b5:b9 into the corresponding cells of e5:h9.
Basically what I'm saying is that I want to keep a track of all previous pay amounts from each pay period. So when the next period changes the date it also copies the new pay amount to the corresponding date of the previous pay section.
I have included a sample.
I am using this formula but I don't know how to get it to populate more than one cell.
Here is the formula:
=INDEX(APPROVED!$A$3:$A$1000,MATCH($F$4&$H$1,APPROVED!$D$3:$D$1000&APPROVED!$C$3:$C$1000,0))
It has multiple matches but I can only see the first match in the cell.