I've included the code I'm using to calculate the net weight depending on which option button is selected. I use a flag ("VLAG") to know whether it's the first time the button is pressed. All variables are DIMmed at initialization (different sub).
By using other flags, I can see the code runs perfectly, but the tare weight ("TARRA") is not incremented each time the button is pressed. The formula I'm using to increment is
I am having trouble defining a variable in a For loop. When I run the loop the first time everything seems to work fine, but when the loop goes back through the second time it carries its previous value with it. Here in lies the problem if the variable is supposed to be empty (not assigned a value). So, for example: 'Variable' in the code below may or may not be given a value depending on the conditions in the For i loop. If it is given a value then 'Variable' will still have that value on the next pass through the For j loop. And if none of the conditions are met for the If statement in the For i loop the second time through the For j loop, it should be an empty variable, but instead the code is reading it as having a value (from the previous pass through the For j loop).
[Code] .....
I have tried using:
[Code] .....
After the For j line, and instead of using:
[Code] ....
I tried using:
[Code] ....
and I've tried:
[Code] .....
I get an Object error with either line I use. I just want to be able to reset the variables each time through the For j loop so in the case of an empty variable, it doesn't try to calculate based on the previous value.
Is there a way to reset all numeric variables to zero during a procedure (e.g. at the end of a loop), without having to manually set them all to zero within the code?
View 3 Replies View RelatedIs tere a way to reset all public variables in a module. I have a number of sub routines withing the same module and need to carry a variable from one to another so I have decalared tham as public variables.
This works fine except for an instance when I expect the variable to be empty (because nothing has yet been assigned to it) when in fact it contains the value that was assigned to last time another sub was run. So I suppose what I need is a way to reset all the variables in the module when a particular sub ends
I want to make it possible to refresh a particular sheet on clicking a button. i can create the button and even assign the macro. but the code for macro, to refresh i don't know how to generate the code.
View 6 Replies View RelatedI have a workbook including several sheets.
I'd like to hide all worksheets and in the excel there is only one visible sheet which is Navigation Page. I want to add several buttons on this sheet and each button will be clicked to call the other sheets.
For example, there is a sheet called Sales_Approval_Form and I'd like to add a button on navigation page called Sales Approval Form and when the user clicks the button the sheet will be open for entering data.
I have two buttons in my excel ("Fund Set up" & "Broker Set up") sheet1. so what i need is when i click the button named as "Fund set up" a input box should appear as "Enter the volume" and the user has to input the volume..For ex, user has entered the volume as 2. After that a line of data should be populated automatically from col A2 to col E2 as below.
Similarly if i click the "Broker set up" button the same action should happen but the activity should be populated as "Broker set up".
S.No Date Activity No.of Req Type of Action
1 21/01/2014 Fund set up 2 Input
2 21/01/2014 Broker set up 4 Input
So whenever i click any of this two buttons a input box should appear to get the volume and once the volume is entered by the user an entry should be populated as above in a new line.
What command should I use if I want to activate sheet1 by clicking a coomandbutton1 on sheet2?
View 5 Replies View RelatedI have master data in sheet1 with 4 headings (EmpNo.; Name; Grade; Status) and i put a push button beside it. what i want to happen is that, if i push the button, all data with a value of "Inactive" in sheet1 will be COPIED to sheet2 with the heading but only the EmpNo and Name will be transfered to sheet2.
View 9 Replies View RelatedI'm just finishing a project that is a collection of three calculators, each of which returns data based on a series of user-supplied variables. All the mechanics are working [thanks in part to replies to previous posts], but there is one more thing I'd like to add:
Does anyone have a way to clear the contents of another cell [actually several] cells via another cell? As the most complex calculator requires eight variables to be entered, I'd like to provide a quick way [a button?] to "clear" or "reset" the calculator - basically wipe all unlocked cells. I should note that all of the cells in question already have Data Validation of one type or another.
A coworker has come to me asking for a way to indicate on a sheet whether or not any autofilters are applied, and a button to reset all the filters. The second part is easy, and I've got a CommandButton with the following code to do it:
View 6 Replies View RelatedI want to add a secondary function to these buttons; this is a necessary function for every order, so I want to make it necessary to click one of the buttons for every order. One way to do this would be to leave the button unchecked.
How could the button be set to leave itself unchecked after being clicked on?
I have a Lookup that updates name from a list.
D2 =IF(LOOKUP($A$2,B:B,C:C)=",",LOOKUP($A$2,B:B,C:C)) - this Works fine
Say A2=3
C1= Name1
C2= Name2
C3= Name3
Also a macros that if D2 is typed over you can re-insert the LookUp.
Sub Reset()
For Each ce In Range("D12) 'Company
'If IsEmpty(ce) Then
ce.FormulaR1C1 = "=IF(LOOKUP(R2C1,C[-2],C[-1])=",",LOOKUP(R2C1,C[-2],C[-1]))"
ce.Font.ColorIndex = 11
'End If
Next
End Sub
The Weird thing is that in stead of putting the value from the LookUp it paste the formula
=IF(LOOKUP(R2C1,C[-2],C[-1])=",",LOOKUP(R2C1,C[-2],C[-1])) like it was text
I have used the reset on a number of numeric equations no problem, but not on a LookUp one. I've tried changing the format of the cell, but not successfully.
I have a spreadsheet with 4 combo boxes and 2 cells that I need reset to a specific value when a button is clicked (the top value for the combo boxes, the function [today()] for one cell, and a specific date for the other). I figured I would put the function and the specific date in seperate hidden cells and the button would link to them, but whatever way gets the job done will work. I know I'll need to code this in VB, but as well as I know excel i've never played with basic before.
View 3 Replies View Relatedhow can i define, in vba that after click on button in sheet1, it looks at value in cell B1 in this sheet and move my cursor exactly on this value in sheet2 where i have data in range (B4:C6000).
View 2 Replies View RelatedI would like to make a userform where additional textboxes (and labels) can be added to the form by clicking a command button. Is this possible to do?
For example, a userform which has:
Contractor 1: (TextBox)
and underneath this have a command button which when clicked will add another text box e.g.
Contractor 2: (TextBox)
I'm new to vba so haven't got a clue how to go about making this userform or even if it is possible.
I can't find a way to reset/clear the textbox in order to enter new data
View 2 Replies View RelatedI have a problem on auto-sorting my data after clicking the "x" or "Close" button on DataForm. Im creating a command button that trigger a macro to open an autofill DataForm. I want a code that everytime i ADD or EDIT using the DataForm, it will automatically sort the Column A after clicking the "x" or "Close" button. Below is the code of my macro:
Code:
Sub OpenForm()
Sheets("DATA").Select
ActiveSheet.ShowDataForm
End Sub
My query is regarding internet explorer 6 automation via code in VBA (Excel 2003). I'm trying to open a page on clicking a button in main page.
I'm able to open both parent and child pages via VBA, but now want to automate events (like radio btn click etc) in child page.
below is my initial code -
'========
Sub ListLinks()
Dim IeApp As InternetExplorer
Dim sURL As String
Dim IeDoc As Object
Dim i As Long
'Create new instance of IE
Set IeApp = New InternetExplorer
I have a pivot table with over 4000 entries and about 12 columns which i filter to get the info i want.
Unfortunately with so many rows and columns in the table, if i do a macro that gets each filter back to 'show all' its really slow.
Doing this manually using the "Show all" option in the filter takes a fraction of a second, so surely there must be a way to do this more quickly in VBA?
i can't understand why manually it takes no time at all, but automating it through recording a macro takes forever.
I'm having a problem creating a Reset All command button that will remove user entered unlocked cell values from an entire workbook save for one specific worksheet. So for example, I have five tabs labeled as "DTF", "Week 1", "Week 2", "Week 3" and "Week 4". I want one single command button (placed in the "DTF" worksheet) to remove all of the unlocked cell values from "Week 1" to "Week 4".
View 9 Replies View RelatedI have never written or used a macro before and I have a simple macro task to complete:
I have Column L (L4:L10) of seven scroll bars that move according to number changes in column F (F4:F10). I want to create a form control command button that resets the changes on the scroll bars according to static column of numbers in Column E (E4:E10).
I don't know if it matters, but I'll add that I plan to add a second button that does the same thing with a different column of data. I assume I'll simply replicate whatever procedure I use in the first button - is this okay?
I have 4 combo boxes with selectable options and several cells for inputting data into. I'm looking to create a reset button that returns combo box values back to the first one in the list and clears all cells at the same time. I've figured out the cell reset as follows;
View 3 Replies View RelatedI have a worksheet where I created a button for the user to click on when they want to generate the chart, but when the button is pushed, it goes to my code in the VBA editor and gives me the error I've attached below. I have no idea what that means and none of my code seems to be highlighted.
View 3 Replies View RelatedI have a spreadsheet with 32 worksheet, I want to write a macro to "save the work, save as.. in a specific location and with a specific name and then reseting all data in specific cells.
View 14 Replies View RelatedUnzip Code - Works without Variables, Breaks with Variables.... This has been driving me bananas...
I have the
Can a Function give two or more output variables. e.g.
Sub a()
x = 5
result = Y(x)
End Sub
Function Y (x As Integer) As Integer
Dim B
B = ... * x
Y = ... * B
this will give back Y as a result. But if I want to get 2 or more output variables (let's say I need to get also B into sub) from one function, how should I do that?
I need this because function works with large matrix and I want to extract some values appeared in between.
I have a lot of text in a cell and I want to create a Hyperlink using only 2 or 3 words and not the whole text. Unfortunately, it seems as though the hyperlink can only be from the cell itself. Is it possible with Excel to create a Hyperlink from a section of text in a cell, and NOT from the cell itself?
View 4 Replies View RelatedI'm trying to make a code so that when optionbutton1 is checked, it allows you to right click to select a cell, then right click on a different cell and select that cell as well as the previous cell, etc. Here's What I have so far.
[Code] .....
I would like to run a macro by clicking a cell. I don't want a toolbar button/menu item and Hyperlinks don't work. Can this be done?
More info: My macro selects the current row in Sheet A and moves it (cut & Paste) to Sheet B in the workbook. The macro then goes back to Sheet A and deletes the now blank row.