Move Range Selection By Two Columns
Nov 19, 2009
I have a spreadsheet with data organized into columns in sets of two - the first column is an X value (Pixel number) and the second column is the Y value (pixel density). I'm trying to make a macro that will select the first set of columns, chart it, move the chart to the next sheet, then select the next two columns of data, chart them and move the chart to the next sheet etc. I've gotten as far as having it make the chart and move it, but I can't seem to make it select the next set of columns - I've been trying different things for a couple days now.
Code:
View 4 Replies
ADVERTISEMENT
May 16, 2014
The first line of the code chooses the columns to select; all columns until there is no value. From there I need to have it sort those columns based on row 1. The problem is that the columns chosen are variable. It could be columns I:N (as shown below) or column G:Z or any other combination. (The code below was recorded if that matters at all.)
View 2 Replies
View Related
Mar 18, 2014
For a specific equation to work I need to know the distance whenever the acceleration is maximum.
The last part is a piece of cake, using MAX I get the desired results.
However, returning the distance is difficult.
What I'd like to do is return the value of the cell to the right of the maximum acceleration.
Using
=ADDRESS(MATCH(MAX(K2:K754);K2:K754;0);COLUMN(K2:K754))
I got the address of MAX, but that's about as far as I get.
View 9 Replies
View Related
Jun 7, 2012
I have a userform with a dropdown box, a refedit and an accept button.
The user selects an item from the drop down box and then selects where on the sheet they want to place the item. I am wondering how to move the selected box in my Userform once the user has selected an entry from the drop down list. This is so that they dont actually have to click in the refedit box after selecting from the drop down box.
View 3 Replies
View Related
May 30, 2014
I have a excel file to keep track of sales pipeline. What I am looking for, is an automated utility or code that will allow excel to automatically move entire rows once a task is completed and can be moved to another sheet. In Prospects sheet I have a column for " Stage" and here you have to select from a drop down menu, either "Prospect", "Contacted" "quoted" "WON" "LOST" What I would like, is that once you have selected one of the sales stage, the entire row or entry, will be automatically moved to the right tab from the "prospects" to a new sheet according to each stage.
SalesPipeline.xlsx
View 2 Replies
View Related
Feb 15, 2010
I found this code on Ozgrid to sort all columns of a worksheet that were continuous with no gaps or spaces that works well:
Sub CopyToA()
Do While ActiveCell <> ""
Range(ActiveCell, ActiveCell.End(xlDown)).Cut Destination:=Range("a65535").End(xlUp).Offset(1, 0)
ActiveCell.Offset(0, 1).Select
Loop
End Sub
However, I've tried to manipulate the code myself to 1) find all columns that aren't empty then 2) sort each column individually (WITHOUT expanding the sort to other columns) and 3) combining all the numbers into one seperate column. There are many posts concerning sorting but not one that addressed this particular situation.
View 2 Replies
View Related
Feb 2, 2008
I am trying to write a macro that will take data from column A and use it as a column header in column C, and then take the corresponding data in column B and list it under the column header in column C. When the value in column A changes it will move on to column D and then list the corresponding data from column B underneath it in column D until all of the data in the 2 columns is spread across the worksheet. Example:..............
View 2 Replies
View Related
Dec 18, 2013
Column A is numbered 1 -100 successively Column B thru D contains data that goes with the assigned number in column A. I need to be able to move rows of data in column B through D to a different set of rows all at the same time (not one cell at a time) without disturbing the set numbers in column A. And with that, have all the other rows of data automatically adjust accordingly(not to be deleted or replaced).
View 1 Replies
View Related
Jan 31, 2013
I have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
View 2 Replies
View Related
Aug 8, 2013
I have two strings in two cells, both are dynamic values. I need to plot the values of any of the column that changed in the third cell either the two cells change its values.
View 5 Replies
View Related
Aug 11, 2013
I need a way to move every 7 rows into columns.
So rows 1-7 become columns 1-7, rows 8-14 into columns 1-7 etc.
View 3 Replies
View Related
Nov 18, 2009
In the attached worksheet I am trying to create a range from
C4 to C12 (all the Officer Roles) and move it to Column E same Range
and
G4 to G12 (all the Officer Names) and move it to Column H same Range
I would need to do this for the entire worksheet. i.e. move all the Officer Roles over 2 columns and the Officer Names over 1 column.
I tried to piece meal it together from code I found here, but I am getting a "wend without while" error.
View 6 Replies
View Related
Feb 22, 2010
I've used the macro recorder to copy a cut and paste routine, but it won't play back correctly. Here's the macro I recorded:
View 7 Replies
View Related
Sep 22, 2012
I have data that I want to move to columns:
-----A
1 Apples
2 Bananas
3 Oranges
4 Watermelon
5 Grapes
6 Kiwi
It should move every two rows to columns, like so:
-----A------------B
1 Apples-------Bananas
2 Oranges -----Watermelon
3 Grapes-------Kiwi
4
View 3 Replies
View Related
Jan 28, 2014
Date
Product
Pass
Fail
Repair
Group Product 1
P
F
R
Group Product 2
P
F
R
Group Product 3
[code]....
I currently have raw data in Sheet 2
On sheet 1 would like to get the summary of the data as posted in the picture... unfortunately there are "groups" in the raw data and I need them separated and conformed to get an accurate picture.
View 1 Replies
View Related
Mar 13, 2009
I started a project where I want to export data from Access (only 2 columns but # of rows vary every day). When the data that is copied to the first tab is a week old and is a Tuesday I want to copy and paste these values in the next tab.
View 9 Replies
View Related
Feb 20, 2014
I have a big table with a lot of data in it. I basically want to get rid of all of the empty cells, so that all the data that is there for the one person is all next to each other.
All the people's names are in a row for themselves so the empty cells would have to move to the left.
View 3 Replies
View Related
Jan 7, 2008
how to write the following in a macro. The task is to have the macro compare both the SSN, amount, and date...if they match go to next row. If Mysoft side exists without a match on the OMNI side, then range for that A-D will be cut and moved to Mysoft Only worksheet and the cells below will be moved up....same holds true for the OMNI side.
View 9 Replies
View Related
Aug 22, 2009
I have a set of data that has a store number in cell A1, the store name in B1 and then the store address in C1, C2, and C3. This pattern repeats for all ~300 stores. I am trying to get all of the store data on one row per store.
I have a set of data that looks like this:
View 6 Replies
View Related
Dec 3, 2009
I have a report that I need to reformat where part of the information is moved from rows to columns.
The report is broken up into "sections" as follows: Each “section” is a series of multiple rows and is broken down as follows:
ROW 1: Contains data (in a single cell) about a Sales rep, which includes (1) rep number & (2) rep name
NEXT ROW(s): Contains data information about an invoice(s), which includes date, invoice number, client name, trans ID, etc. The invoice data can be one row up to as many as 500 rows
LAST ROW: Contains the Rep Subtotal
I need to spit out a report that contains the invoice data only (the middle part of the “section”). I don't want "ROW 1" or "LAST ROW" of each section in the output. For each invoice row, I need to include the rep number and the rep name for each invoice. As noted, the rep number and name is always listed in the row preceding the invoice data. The format is always a 6-digit code followed by the name. So I need to split the data into two pieces.
View 12 Replies
View Related
Mar 26, 2013
is there anyway to arrange pivot table columns without manipulating the field list items?
in other words, in older versions of excel, you could just right click the column and select move left, or move right
View 2 Replies
View Related
Jan 21, 2009
I need to move a portion of info over 4 columns. I need to do this after a certain criteria is met.
A B C D E
1 Mem# Mem Name Sta Area
2 123C Joe Smith G bev
3 4 Wine 4.95 6
4 5 wine 5.95 6
5 2 food 6.95 5
6 124G Fred Choi C Bev
7 4 Wine 4.95 6
8 5 wine 5.95 6
9 2 food 6.95 5
A3, B3,c3,d3 need to shift over 4 clmns then when nxt member #(a6) is met rows below need to shift over 4 clmns until nxt mem #, so on and so forth. Please Help. New to the macro scene.
View 10 Replies
View Related
Aug 16, 2008
We have to copy from lot of Java webpages
1. Data of single column 3 rows of data to First blank cell in 'C' column (say C6)
2. Then Transpose it across to the same row into 3 columns (from same C6 to d6 & e6)
Here I tried some VBA but needs how to put it across....
View 4 Replies
View Related
Jul 22, 2006
I'm creating a mailing list by pasting text into a spreadsheet, then spending hours cutting and pasting the company name into column c, address into column d, city into e...and so on. Then move down 5 rows and do it again.
I'm not sure where to start, I recorded several macros but none have worked.
View 8 Replies
View Related
May 1, 2008
I have 2 large rows of data next to each other imported from a different programme. Some of the cells in these 2 rows consist of values, some consist of words. I only want to cut the cells with values in these rows and paste them in a new row, called TXid. I have written VB code that cuts all the data in the rows and pastes them onto the new row. Now I would like to cut only the values in the row. How do I select only the values in the cell?
Cells.Select
Cells.EntireColumn.AutoFit
Range("I1").Select
ActiveCell.FormulaR1C1 = "TXid"
Range("G3").Select
Do
If ActiveCell = IsNumber = True Then
Selection.Cut Selection.Offset(0, 2)
End If
ActiveCell.Offset(1, 0).Select
Loop Until ActiveCell = ""
Range("H3").Select
Do
If ActiveCell = Isnumber = True Then
Selection.Cut Selection.Offset(0, 1)
Loop Until ActiveCell = ""
The ActiveCell = Isnumber = true is not working the way I want it to.
View 9 Replies
View Related
Sep 10, 2009
Hi I have a process in which I have to create a selection without bias. There are 9 categories in this selection process. The 1st and 2nd category already have code and they work differently from the rest. For the 3rd through the 8th categories I have to choose one from the 3rd category, then one from the 4th, etc. After the 8th category I start back at the 3rd and go to the 4th, ect. It ends when cell A1 reaches 30%.
Its a little difficult to explain but the process is simple enough to understand once you see it. I have attached an example of the process. I have also started the code and left explanations within the code.
View 14 Replies
View Related
Sep 20, 2009
I am trying to find the sum value of a range, specified by two variables.
ie. what is the total spend in 2007 for Hong Kong?
I think I have (with the help of Andy Pope) resolved how to distinguish the correct figures which I wish to summate using with the following
View 7 Replies
View Related
Aug 30, 2008
I have a worksheet that lists the months of the year on row 3 from columns C through N.
What I am trying to do is to be able to select the month I want from a drop down list or combobox and then hide the remaining columns based on the selection. For example if JAN is selected the months FEB through to DEC would be hidden.
View 9 Replies
View Related
Aug 16, 2014
I want to create a chart where I have 5 clustered columns, repeating 4 times(weeks). Each column(total invoices entered per user) has a error rate, which I would like to display as a line graph with markers. In other works, first column has its own line, second column has its own line etc. this spans the 4 weeks. When I create the chart now, ALL 5 the line markers are placed in the same one column. I can not move the line marker to sit on top of the column it is associated with.
View 2 Replies
View Related
May 18, 2013
So, I have a column with data on rows as follows below. I need to arrange the data below in such a way that I have on first column the company name, second column the contact person and so on depending on what data is found (tel, e-mail, website).
The data is on rows and I have separated each company/group of data with a row between them. There are in total aprox 200 companies/groups of data that I need to arrange as explained above.
I have tried with transpose but I have to manually do it 200 times. I have tried with an indirect formula but the companies/groups of data do no have same amount of info/rows e.g. some lack the phone number or other data.
if there is a method to save the time and not arrange them manually.
Actinote
Contact: Toine Kets
Managing Director
Str. Tache Ionescu 3, Et. 5, Apt. 10
[Code]....
View 7 Replies
View Related
