I want to get the dynamic sum of a column after a change in the auto filter. In the attached excel after filtering the column 1 and column 2, i want to add all the values of column 3. This should happen dynamically.
For E.g. : Column 1 =0
Column 2 =a (Refer to the attached excel sheet.)
Then Total should return 200 (i.e. Sum of column 3 after the filtering).
I am trying to do a dynamic formatting where only first row of each unique value should have font color black & rest of the values of same should have white font color. This would happen for each unique value in row D.
My code is working fine when each value has same number of rows (Row D)
But when each value has different number of rows then code is giving some weird results.
I have attached file with sample values & code which works fine with equal rows of each values.
macro for dynamic filter formatting.xlsm
In my 2003 workbook I have a number of sheets.
The 'Details' sheet has, among other data, the 'year' that the workbook refers to. From this, the beginning and end dates of each quarter appear in Cells F2:F10 in the 'Details' Sheet in the format dd/mm/yyyy.
In the 'Management' Sheet I have four buttons - Q1, Q2, Q3 and Q4. I want to attach code to apply a custom autofilter to each button so that clicking on one of the buttons will show only data from that quarter.
Using the macro recorder the following code is generated when applying a custom AutoFilter for Quarter One:
Sub QuarterOne
Selection.AutoFilter Field:=3, Criteria1:=">=01/01/2009", Operator:=xlAnd , Criteria2:="
I'm working on an excel sheet to display technical problems in an office. I want to use a filter in order to not display problems that were resolved (by applying a filter to show only "0" on the "problem duration" column that displays "hours problem was up after solved" and "0" if not solved) as the point is to display only non-resolved issues.
I wanted this filter to be re-applied constantly, meaning once I fill the time and date it's solved and the formula calculates the time it was up, this row will automatically vanish due to the filter applied.
I found this thread on your site Refresh Autofilter Automatically from the resolved problems so we need to remove the filters once in awhile. With this after the filter is removed, you cannot setup a new filter at all (it just doesn't seem to allow you, erasing it after it is being applied). I need to not only be able to setup a new filter, but also that this new filter will be reapplied automatically all the time (temporary disable of a filter is also an option, but I do not know whether it's possible).
I do have Excel 2007 on Vista, but I also need this to work on Excel 2003 with XP.
I have a worksheet set up with code to have it Autofilter. My criteria is that if it has 0's in column d then it gets hidden.
This sheet is automatically filled in from information on another sheet.
Is there anyway that when the information is changed that the AutoFilter will automatically refresh itself?
Is it possible to change those AutoFilter drop-down arrows that are active? As it is now they are hard to spot which is in use.
View 5 Replies View RelatedI read your reply to the thread below, and used your Worksheet_Calculate routine from it. It only works for the first sheet in my workbook. I have multiple sheets in the workbook, and when I run the routine on an activesheet other than the first sheet in the workbook, it doesnt work.
Is there a way to get this routine to work on a worksheet other than the first one in the book?
I'm trying to use " autofilter". I put the code as
Worksheet_Change(ByVal Target As Excel. Range)
so it'll update by itself. My criteria are on row 5 and all my data is below row 7. Row 7 contains the headers.
This all works fine for text-fields. My question is if someone can get it working with numbered fields?
I am wanting vba to loop though a range basically till the last row of the column however within the loop the row gets inserted and the lr which is pre defined does not change. I want to be able to change my lr within the loop, maybe reset it or something...or may be alternative..
I tried using a method where it will loop through a each cell in col however that takes too much times....because it is going through each column...
Code:
lr = Cells(Rows.Count,
Code:
iCol).End(xlUp).Row
For y = 1 To lr
Cells(y, iCol).Select
If ActiveCell.value "" Then
[Code]....
There is POLICY statement that determine an what ACTION should be applied to a paticular building given a score for "LIFE" & "RISK" which results in varing policies A-D. (The Policy intervention points differs slightly for varing types of building. This excel sheet works just fine, and provides the correct guidance for our engineers by suggesting Policy A-D on input of tbuilding type and LIfe/Risk score. However the Policy is a guide, and they do need to apply a level of judgement with the data close to intervention points.
My Question,
I would like to provide further graphical representation to aid decision making. I have a graph plots the X Axis ( LIFE) 0-100, and y Axis (risk) 0-5 and show the , but what i need to be able to do is dynamically adjust the position where the x&y axis cross, so showing visually the intervention point when different building types are selected.
I'm trying to change my code below to count blank cells between a given point "c11" and the next non-blank cell to set a validation list in all the cells inbetween I think this is what I want to do because right now if I insert a row in the middle of the hardcoded range I get an error.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim Add As String, Size As String, Sch As String
If Not rTarget Is Nothing Then
If Not Intersect(Target, rTarget) Is Nothing Then
Macro1
End If
End If
With Range("c11:c52").Validation
.Delete
.Add Type:=xlValidateList, AlertStyle:=xlValidAlertStop, Operator:= _
xlBetween, Formula1:="=MaterialList"
.IgnoreBlank = True................
Im sure this is a very common problem. I tried searching for it but I havent found anything that solves this for me. Here is the code Im using:
View 3 Replies View RelatedWhen i record a macro with an autofilter, the default setting is always "equals". Is there any VBA code or anything to be able to change so that my macro will search in a "contains" setting.
View 9 Replies View RelatedI have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
I can select the top cell in column "F" after filtering by multiple columns using VBA and arrays, but now want to I want to use the top cell in column "F" to search for all other equipment that uses this item.
E.g. remove filter, and reapply autofilter to column "F" based on selected cell as per below VBA
Note: Row 1 contains command buttons and row 2 Headers.
I can set the autofilter, change it, remove all using Macros. What I need to know how to do is reset a filtered column to ALL while leaving all other filters on.
View 2 Replies View RelatedI have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
I would like to replace the blue bit of this Dynamic Named Range (DNR) with an INDIRECT formula in order to modify the starting point for the DNR: =OFFSET(DATA!$C$60,0,0,20,1). Unfortunately, I can’t seem to get my INDIRECT formula to work in order to use it to replace the blue bit above: INDIRECT("'"DATA"'!&ADDRESS(MATCH('SHEET1'!AC8,DATA_Date,0)+22,3)"). The orange bit of the formula above returns a value of 60, therefore the ADDRESS formula should return $C$60, that can then feed into the INDIRECT and act as the equivalent of DATA!$C$60. But it doesn’t.
View 2 Replies View RelatedI have a question on the above but can't seem to find a solution. There are two ways that I can find for dealing with dynamic lists via data validation:-
1) Offset and match, cavet being the data must be sorted a-z
2) Have lists for each potential selection
Is there any way to get around 1 without having to do 2? E.g. Got two columns of data, unsorted, and a list from which the user can choose from. The user chooses from the list in first cell, in the second cell require the dynamic list to return all the values accordingly?
I have a dynamic table which is linked to a couple of charts. The table must remain dynamic.
I needed to add two new columns to the table, "Focus Area" and "Category". I need a drop down list in the "Category" column to be dependent on the item selected from a drop down menu in "Focus Area".
I can get the first row of the dynamic table to do this.... however; subsequent rows all lock the drop down list in the "Category" column to the same choices regardless of what is chosen in the "Focus Area" list.
Is there a way to make dynamic drop downs within a dynamic table?
auto filter options in excel. For some reason it is only sorting up to row 140.
View 14 Replies View Related I have a situation that I cannot get my hands on. I have a set of Project Numbers in my Column A. (Will Try to post an example).
I need that everytime I change a number in my Column B that it will change all the numbers, in my column B, based on the matching Text in my Column A.
Demo1.xlsm
i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies View RelatedSay you have a long list of data, and you go to Data menu --> Filter --> AutoFilter
And then you want to use the Custom AutoFilter. Here's a screenshot:
[url]
Is there any way to do MORE than two autofilters?
I have a list of item numbers in a column which is Autofiltered. I can go to the autofilter drop down and then to custom and select two item numbers to allow through the filter, however I have about ten item numbers that I want to allow through the filter.
View 10 Replies View RelatedIs it possible to have multiple instances of autofilter on a single worksheet? The two autofilters should not be related to each other and are on different sets of data (in different rows as well as columns but in the same worksheet).
View 2 Replies View RelatedI have a situation - where I have a table and a "eSubtotal" cell that basically shows the subtotal value when Autofilter is ON and a SUMIFS calculated value when Autofilter is OFF. I have written this in the Selection change event of the sheet.
For this purpose, I have perform a regular check of AutoFilterMode = true or false and based on this result, I change the formula in the cell, eSubtotal.
Now the challenge is, I don't want to apply SUBTOTAL formula when AutoFilter is ON but there is no filter in any of the columns. I want to keep the SUMIFS just like that in this case.
So far, no good luck..
The following the code from the macro recorder. Is there a better way to execute this task in proper VBA code?
How do you add an [If...Then] critieria when 0 or 0.00 are not found, then continue to search for the next criteria, Non-Blanks?
I have 2 more questions within this .....
When I run the following code, it just returns records that matches "Commonwealth" and not a single record with "State". What am I doing wrong?