Essentially I have a sheet of names. This is just my master database. Other sheets get names from this sheet. The names are alphabetized. When I add a new name, the names are resorted on other sheets, but the data assocaiated with those names does not move.
Example:
Sheet1:
Jane Doe
John Doe
Add
Jimmy Doe
Therefore:..............
I'm looking to pull names from a database to a particular sheet based on what info is displayed in the database. I have six names listed in the database with a league type and position. I have three different tabs at the bottom for where the info is supposed to pull depending on the player type.
For example, I want all six players to pull to the 'Mixed' tab and populate the appropriate area based on their position. Next I'd like the 3 players with 'AL' for their league type to populate only on the AL tab and likewise for the players with 'NL' for the NL tab. Not only do I need the players to pull to the appropriate tab but i also want them to populate in the right position within that tab.
I have successfully loaded a combo box lookup in one cell referencing a column in another worksheet. While the drop down is pulling in all the names listed, there are duplicates in the data set. I want the drop down to only pull unique names. Is there a way I can do this and still use the combo box feature.
View 3 Replies View RelatedI have a spreadsheet with data of customer orders. I am looking for a way to pull the customers who have placed an order between January and August, but did NOT place an order in September (in order to reach out to those customers who have stopped ordering).
I can't post attachments for some reason, so this is a description of how the sheet looks.
Column:
A - Delivery Date (MM/DD/YYYY)
B - Month (MM) --> formula created to pull month from column A. For example 2/12/2013 returns "2"
C - First Name
D - Last Name
I need to find a way to create a list of customers, without duplicates, who placed an order previous to Sept, but not in Sept. So, pull unique names from column C and D that have an entry in column B of 1-8, but NOT 9.
I have a list of names in column A these names repeat themselves a lot and I don't know how many there are.
now I want to make a list of the names in column c starting at C2 that looks down row A finds names and puts them in column C one after the other.
I just started playing with creating my own macros. I've written a macro to pull all the names of the worksheets in a workbook, now what I want to do is write a piece of code that will pull data from a cell in those worksheets.
So for instance I have all my worksheet names in cell A1 to A10, I want to pull the data from cell E1 from every worksheet in A1 to A10. Can someone help me with a sample code to work with. I'm still reading Power Progamming haven't gotten so far yet.
is it possible to set up a form (or any method) that would let me input a name (from my workbook) that would then "pull" up details about that name. I am thinking of making a staff holiday planner. This would have a column of names, holiday entitlement,days brought forward etc and columns that have a year (daily) calendar.
View 2 Replies View RelatedIs there a way that I can click on a link in a worksheet that is linked to a data list in in another sheet and display the results in a text box on the original sheet containing the link.
For example ...
I have a table with multiple rows for some employees and single rows for others. Each employee has a unique identifier.
Employee IDT1T2T3T4123Net salesmarket assetsmarginsspeed to market123Net salesturnover per quarterProfitOn time delivery112Net salesmarket assetsmarginsspeed to market180No. of ordersturnover per quarterProfitOn time delivery180unit salesturnover per quartermarginsspeed to market98No. of ordersmarket assetsmarginsturnover per quarter
Is there a way in which I can restructure the data so that the multiple rows for any single employee are added into subsequent columns in one single row? e.g.
Employee IDT1T2T3T4T1bT2bT3bT4b123Net salesmarket assetsmarginsspeed to marketNet salesturnover per quarterProfitOn time delivery112Net salesmarket assetsmarginsspeed to market180No. of ordersturnover per quarterProfitOn time deliveryunit salesturnover per quartermarginsspeed to market98No. of ordersmarket assetsmarginsturnover per quarter
The table has approximately 15000 rows & c. 30 columns in the original format. I can use basic excel, but I've never dipped into macros or anything very complicated...
I am trying to do a multiple compare.
First I have a table that has these headings with data..
Name, Level, Req1, Req2, Req3, Req4
Bob, 2, 423, 506, 649, 798
Fred, 4, 601, 799, 1023, 1547
In another section I have..
name Drop down, level drop down. with the 4 Req.
Basically, when you select Fred and 4, I want to to display 601, 799, 1023, and 1547 in the columns to the left of where you do the selection. (which is not in the same place as that table at the top of this question.
I have an excel document that contains two columns and ithe columns there are more than 50000 rows of data. The first column contains numbers and the second column contains text filled from only three values for example work, work 1 and work 2.
I want to see only the three identical same values from column A where the values from column B are diferent.Example of how to look the result criteria:
Column A Column B
123456 work
123456 work 1
123456 work 2
Trying to set up a dynamic data validation, where each of the subsequent data validation boxes change based on the selection in the first data validation box (while maintaining 4 parameters within a cell, except for the last one).
I have used the IF-statements to determine the "Week's SUM" in H5.
What I'd like to do next is to determine a formula in the "Week's SUM" cells (H6,H7,H8) based on the choices in data validation boxes "Week #" (G6,G7,G8) with the following rules in place:
1. If I made a choice in G5 to be "1" which caused data validation in cell G6 to update, then in G6 I choose "2", the output in H6 should be just week 2's value of 20 (not the sum of week 1 and 2).
2. However, if I choose "3" in G6 (after I chose "1" in G5, as above) then I'd like the output in H6 to be the SUM of week's 2 AND 3, if that makes sense and so on. (e.g. If I chose "5" in G6, then output in H6 should be the SUM of week's 2 AND 3 AND 4 AND 5).
Same rules apply for H7 and H8. I have a feeling this may involve MATCH function and INDIRECT or SUMIFS but how to approach this.
I've attached a file : Dynamic DV and Dynamic SUMS.xlsx
The database is for a Prison, and an obvious item to search for on a userform is Prison number. I have a serach option that generates an array listing in a listbox, selecting that item then populates the userform - no problem.
The problem occurs when an individual has more than once instance that has been recorded, is it possible to have more than one row generated in a listbox that can be selected, I only want indiviudal rows selected. The coding I am using for one of the single instance listbox is etc etc etc has been used to demonstrate that the coding continues to the length of the array requied
Private Sub FindAll()
Dim FirstAddress As String
Dim strFind As String 'what to find
Dim rSearch As Range 'range to search
Dim fndA, fndB, fndC, fndD, fndE, 'etc etc etc' As String
Dim i As Integer
i = 1
Set rSearch = Sheet1.Range("ChargeNo.")
strFind = Me.CbAdjFind.Value 'find Charge No
With rSearch
Set c = .Find(strFind, LookIn:=xlValues)..............
So the problem is that I have two workbooks: one has a set of identifying values which are a subset of one of the sets of values in the second and I need to match them up. In addition I need to take the values two columns to the right of the matched values in the second workbook and put them in the first.
Here is what my formula looks like now.
=IF(A5=VLOOKUP(A5,'[WBOOK2]Sheet1'!$A:$A,1,TRUE),INDEX('[WBOOK2]Sheet1'!,MATCH(A5,'[WBOOK2]Sheet1'!$A:$A,0),3),"NF")
Whenever I try to run it an error message comes up and highlights the match function name.
I have a spreadsheet with my Periods along row 10. e.g. C10: "1", D10: "2", E10 "3", F10: "4", G10: "5" etc. (green on the attached sheet). I have my departments along column B, e.g. B11: "Baked" B12: "Fresh" B13: "Frozen" (yellow on the attached sheet)
what I need and cannot work out is some VBA code that will populate two variables (lets call them Period & Department) when I click on one of the figures. For example if I click on cell: if I click E14: Period would have the contents of cell E10, and Department the contents of cell B14.
if i click G14: Period would have the contents of G10, and Department the contents of cell B14 again. I know how to get the click on the cell to work properly etc, and I have code to slot these variables into that works very nicely, I just can't get this bit to work!!!!
Im going to try to make this as clear as possible. I cant use my actual data because it wouldnt make any sense to anyone so Ive made up an example problem. Here goes...
Lets say in Sheet 1 I have two descending columns of data. Column A is MODEL of Vehicle (Civic for example). Column B is vehicle identification number (xxx for example). Sheet two has 4 columns of data, but only one is really required for this example. Cell A1 is the MAKE of vehicle (Honda for example). Directly below that in Cell A2 is the MODEL of the vehicle (Civic). There are then a few rows of empty space until it gets to the next vehicle MAKE and MODEL.
So in Sheet1 there is a long list of MAKE's in ColumnA and VIN's in ColumnB. Sheet2 Has a long list of MAKE's and MODEL's in ColumnA and random data in other columns.
What I want to do is assemble a Macro to start in Sheet1-A2, read the MODEL then copy the corresponding Vehicle Identification Number in B2. I then want it to go to Sheet2-A2 and start searching downward until it comes across a matching MODEL. Once it finds the match I want it to step downward 2 cells and paste the Vehicle Identification Number. Then return to Sheet1-A3, and repeat the process until EOF.
I have an Excel file with two different visible sheets (dashboards), each with different types of charts, which are pulling from the same data tables on a hidden sheet. I have a data validation drop down list on one of the dashboard sheets, which lists 7 items. Once one of the 7 item is selected, both dashboards update, which is what I want. However, I'd like to be able to have duplicated, related validation drop down lists. So if someone is looking at the first dashboard sheet and they select a new item, when they go to the second dashboard and see that same item, they could on that second dashboard select a new item without having to go back to the first dashboard.
I'd provide an example if I could, but cannot. I've tried searching on the forum for something similar, but most often the topic of dependent data validation is on two different types of drop downs with the second being dependent on the first, whereas I'm looking for two drop downs that are interconnected and can update in sync.
Please see attached the Workbook. I need to check the policy Numbers in Column A to be present in Access Table. If yes then write the corresponding ScanDate and BatchNo in columns I and J.
Sun Project.xls
I need to look up the name in E2 in the list in column A and if it matches then lookup name in F2 in list column b, if it matches then the corresponding number in column C is displayed in column G. If neither names are in the 2 columns the words"Not on lists" is displayed in cell in column G.
The other problem is one name is spelled two different ways I want it to look for both spelling before moving on to looking up the second name.
I started with this formula but I'm getting #N/A or "not on list" when they are on the list. I'm using ranges prod_sum is columns AthruC, Last_name is range BthruC. =IF(AND(VLOOKUP(F4,prod_sum,3,0),VLOOKUP(I4,last_name,2,0)),"not on list")
Can I create data validation list of the names created in the name box or of the sheet tab names?
View 5 Replies View RelatedI want to return a value based on once off time related data which is captured at 4 time periods throughout a day. I have another set of data which does not line up with this data but I want it to return the value closest earliest value.
Given this data:
27-6-14 3:00 12
27-6-14 7:00 18
27-6-14 11:00 19
If I have a time like 27-6-14 5:00 I want to return a value of 12 (Previous time). How would this be possible?
I have a column of numbers each have a 0. infront of them (example 0.2346
0.5698). I want to pull the number from the right until it hits the decimal sign. So for the two above the result would be 2346 and 5698
I have a spreadsheet that is updated weekly -- but every week new info is added that needs a user to input corresponding info. I use a vlookup function to link to another spreadsheet that populates the info from previous weeks and the info that is missing shows up as #N/A...
First I was using a msgbox function to get the info:
HTML Code:
For Each b In myrange
If Application.IsNA(b.Value) Then
Employee = b.Offset(0, -2).Value
SSID = InputBox("Please enter ID# for " & Employee & " :", "New Employee Found")
b.Value = SSID
End If
Next b
But it can be up to 30 different new employees... and that is time consuming.
I would like to make it more user friendly by creating ONE userform that displays all of the employees as labels -- has a text box in which to put the ID # -- and then has a drop down box to choose the type of employee (2 options). I want all of that info to go back to the reference spreadsheet so it will be saved for following weeks, and then redo the vlookup to get the info into the new weekly spreadsheet (I can do that part)....
HTML Code:
Private Sub CloseButton_Click()
Unload UserForm1
End Sub
Private Sub ComboBox1_Change()
[Code] ......
Looking for a formula to accomplish the following:
I'm trying to populate cell A31 on a worksheet titled "VolumeTotals" with the data in Cell E23 from a worksheet titled "CurrentCustomers" if the merged cells F3-F22 on worksheet "CurrentCustomers" are equal to the word "Contract".
I have an excel workbook with 2 worksheets. One worksheet shows the MASTER LIST of COMPLETE Customer Names (e.g. ABB Supplies Incorporated). The other worksheet has information on customers but the customer names typed in are incomplete (e.g. ABC Supplies). I need a macro that would look do a comparison of the customer names in the 2nd worksheet to the Master List worksheet and pull the data (complete name, address, etc.) for those that would match (partial match since company name is 2nd worksheet is usually incomplete).
View 2 Replies View RelatedI have one excel 2010 workbook with 5 work sheets, each work sheet contains a list with first/last name(one column) and the company name, some have a 3rd column with their email address in each sheet represents each year starting at 2008 thru to 2013 i have to find out if the people that attended an event in 2008 also attended it in 2009/10/11/12/13 and if they didnt, put their name and company name onto a blank worksheet within the same workbook without using a macro, how can i do this?
View 2 Replies View RelatedI want to pull data from another sheet, however there are multiple listings of each and I want to pull the data to another sheet for each line. I maybe easier if I try and show below:
Col. ACol. BCol. C
Smith101
Jones512
Green65
Black1214
Smith 3612
Jones1512
Dual25
Green1225
I want to pull this data for each name in Col. A in to another sheet. I've tried "IF", "Vlookup" and a couple of others, it just seems to be hitting the first option and pulling the data but not the ones below.
So if I selected Green on the second tab it brings through the "6" and "5", but not informtion from the listing from Green below. So I wiould like to list all the Green's, and the applicable data.
Is there a way to use Data Validation that will pull data from a source list and also be able to type in additional data or just new data in same cell?
View 3 Replies View RelatedI have a Pivot Table, with lots of data in, what I want to be able to do is on a separate sheet pull out the data from the first column(A), and then average out the figures from Columns(B-E).
When this has been done on the sheet (with the average data) in the next column, I then want to use Column(F) (from Pivot Table), and do a simple sum to work out 5% of the difference if it is greater than ZERO between Average Column and Column(F) (from pivot Table) Column(F) must be higher than the average in order to work out the 5%.
Is there a way to pull out all of the data from a row and place it into a cell out to the right of the range?
Some of the data is text and some of it is dates.
My problem is that it is a big spread sheet and the data is scattered in the sheet. Not uniform at all.