I want to refer to columns by column order (i.e. A=1, B=2, etc.)
I want to sum a range for dynamic columns and fixed widths (i.e. B2:B5 or F2:F5, etc).
i have C_N as variant and i am trying to write the formula but desperately getting syntax error.
Code:
Range("M5") = WorksheetFunction.Sum(Range(C_N& "2" : C_N&"5")))
i tried before to make another easier formula like
Code:
=Range("N5:N" & LastRow)
and it worked.
I need a way to re-order an excel worksheets columns based on another worksheet.
Data is extracted from a database into excel however users can configure the columns in the initial system. to how they like This causes problems when the data is copied into an excel spreadsheet I have created as the data copied will not be in the same column order as is required.
How can i reorder the columns without physically having to cut and paste the columns to match?
I have attached a sample spreadsheet.
You will see on the spreadsheet that 'fixed columns' is the order that i require the data however 'variable columns' is not in the same order.
I want to define a dynamic named range based on the last date in a range (AE4 down). Unfortunately there are gaps in this range where no date is in a cell.
View 5 Replies View RelatedLooking for a dynamic macro to reorder columns in a worksheet from a list of column headings Column A in another worksheet.
View 3 Replies View RelatedI'm trying to make an order form that is based off of a price list. Basically there will be 200 items or so someone can just enter the quantity they want into a column. I would then like another sheet on the workbook to auto-populate all of the fields available. The thing I'm having trouble with is I don't want the finished form to be as long as the price list with blank rows in-between. I've been reading up to make a macro work for this, but have had no success.
View 3 Replies View RelatedI have data in a spreadsheet similar to the below.
[Code] ....
What I need to do is created a named dynamic range based on the current month which will contain all rows/columns within that range. Ideally I need it to create the range for the current month so I can then use this as the data source for a pivot table.
I believe it is something to do with index and match functions?
I would like to create a dynamic range based on a cell value. However, the cell reference may vary because the numbers of entries in the workbook can vary.
In addition to that, after the first range (eg. A1:A10), I would like to create a second range after the first (eg. A11:A20).
I have a question that I am not able to answer.
Basically I have a worksheet with the following:
C4 -a cell where a user can input a number
the rest of the worksheet is data in a normal fashion.
I am seeking a macro that will select & copy cell G6 through whatever the value of C4 is. This selection would be a variable range with the offset being whatever is typed into C4.
Ex:
If the value of C4 is 5 then I would like G6:G11 to be selected and copied.
I am aware of offset, but don't know how to implement it in such a dynamic way.
Of course you can make a Range like this
View 3 Replies View RelatedI have a column (B) of randomly generated numbers 1-14, and am using this formula range to sort in descending order and return the relevant value from column (c).
=VLOOKUP(LARGE(B3:B20,1),B3:C20,2,) to =VLOOKUP(LARGE(B3:B20,14),B3:C20,2,)
Works great, except when a number is duplicated, (E.G. 14,13,13,12,11,10,10,9,8 etc). It then returns the first value from(C) repeated, and not the value from the second and subsequent duplicated reference numbers.
I need to do stats for each month within a set of data. Ie take the min for all data in the month of Jan only and repeat for all other months etc. Is there some way I can set up a Min function to only consider the data belonging to jan for example and have it change and only consider Feb, then march.. etc Seems like it would be easy to just do this manually but there is a large timeframe over which data was collected so would take forever.
Have attached sample of data. rainfall.xlsx
I need a Text to Column VBA code that will find a dynamic range. Example: I will be sorting range B1:X20. After it has been sorted, I need a VBA Text to Columns code to be applied to dynamic range H1:H20. I can write VBA language that will identify H1 as Range1 and H20 as Range2. How do I get the VBA to identify Range1:Range2 for Text to Column to be applied? Can "Dim" languace assist in locating the dynamic range?
View 5 Replies View RelatedI am using the below code to sum from "L2" to LastRow2
Code:
LastRow2 = ActiveSheet.Range("L6500").End(xlUp).row
LastRow3 = ActiveSheet.Range("L6500").End(xlUp).End(xlUp).row
Cells(LastRow2 + 3, 16).Formula = "=SUM(L2:L" & LastRow2 & ")"
How can I replace “L2” with “LastRow3” which is a dynamic starting point for the range sum?
I'm trying to define a dynamic column range call 'Cost'
If it starts in Column C, row 4 [C4]. I want the range that to go down to the Row I have defined as 'subtotal'
The user will be able to insert new rows above 'subtotal'
How can I define Column C4 so that any new row added will be including in the defined row range 'Cost'?
I need to create a validated list of month choices, and the list needs to be filled with the names (Month and year, I.E. Feb-07) of the last 13 months for which we have data.
(We get our data about 8 weeks late, so being that it is mid april now I only have data now up to the end of Feb-08. I have created a chart in which the viewer can change the month to view but up to now it has only been for the current year, now they want to see the past 13 months, obviously I don't want to go in and change this every time the next months' data is entered.
So, what offset formula do I use to reference the month-year names which are spread across Row 1, presently in columns C thru N, and the next months data (March) will go in column O, then April's in column, P, etc
I have tried several variations of this; =OFFSET(C1,0,0,0, COUNTA($1:$!)) but how do I get only the last 13 months?
I'm trying to calculate a figure in a report tab that reads off the data tab and looks for a specific column based on the header of that column. My explanation is admittedly poor but I've attached a sample file with an outline of what I'm trying to do which I hope makes things clearer.
Sample File.xlsx
Every thread I see on Google search for creating check boxes on a user form based on worksheet data says to use a list box, but I really want check boxes. Any code that will create, on initialize of the user form, a check box for each item in Import!B2:B (last row), regardless of the number of items? I am only worried about having about 20 max. Usually, it will only be 5 to 10.
I did try the list box, but it doesn't populate the list box.
Code:
Private Sub UserForm2_Initialize()
Dim lbtarget As MSForms.ListBox
Dim rngSource As Range
'Set reference to the range of data to be filled
[Code] ..........
I have a column with random values that are generated my my machinery.I should not sort them, because they provide me with the performance graph. Lets say i have column "A"
0
2
9
9.5
30
90
22
15
9
0
As the max value of this is 90, and its 10% of MAX is 9, which occurs at 3rd and 9 th positions.I need to find the average of its adjacent range, with zeros not considered.It has to calculate the max value in the column, find 10% of max and do average of adjacent column from the sl. no of first occurrence of 10% value in first column to the sl no of last occurrence of 10% value in first column.
the exact 10% value may not always exist. 10% of 90 is 9, but if the max value is 94, the 10% would be 9.4 which doesn't exist. then it has to take the nearest available predecessor in that case.i get values in decimals mostly and only some of them are perfect integers, thus this consideration goes with it,and also, my range actually is B14:B10013
i would most probably have the 10% value within the first 50 "non zero" entries and reoccurring somewhere probably within the last 50 "non zero" entries.
I require code to identify the last row in column 'A' that contains data, and then to select every row up to that one, and each column up to 'H'. My data begins on row 3, and the rows with data varies from row 7 through 120. The columns with data is constant so there is no need to test in that direction.
View 2 Replies View RelatedI need to name a dynamic range of cells. The only constant is the column - H, and the heading "MRC".
MRC column in a table represents an array formula. Unknown is the row where it is going to show up and the number of rows that this array formula will take. I need to name this range (active cells based on the array formula) but do not know what row does it start with and how many rows will it take.
It is not the last table in column H either but there are 2 empty rows before the next table.
Trying something like that...
=========================
Set aCell = Range("H:H").Find(What:="MRC", LookIn:=xlValues, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False)
If Not aCell Is Nothing Then
aCell.Offset(1, 0).Select
========================================
That's how I select the first cell in the range. Not sure how to select the whole range and name it ..
ActiveCell.End(1xDown) ?
I was wondering if there was a way to create a two cell dynamic range that doesn't expand, but instead shifts.
The cells that I'm interested in are always at the bottom of the column of data. For example, the first two cells I want as my range are C13 and D13. Then, for my next use of the range, I would like it to include C14 and D14.
I have a spread sheet that has three sheets, PROJECTS - TIMES - LISTS Time sheet.xlsx PROJECTS contains a list of 'In Progress' and 'completed' projects for work, with relevant other data, I.e. PROJECT No. / STATUS etc This will grow to 1,000's of rows TIMES will contain the amount of time a person spends on a PROJECT on a daily basis. This will grow to 10,000's of rows LISTS contain basic validation list for the first 2 sheets.
Part A
I would like to have a validation drop down list for the PROJECT NO column in the TIMES sheet that only lists the PROJECT NO from the PROJECTS sheet where STATUS <> COMPLETED. I.e. I only want to display the PROJECT NO's for current projects.
Part B
Even though I only want the PROJECT NO used, can the drop down list also contain other column's data for reference information only before one is selected.
I have data that resembles (I have also attached an example workbook as well if that is easier)
Column A.................Column B................Column C..................Column D.............Column E................Column F
Year.......................Quarter...................Month..................Product-Code...........[data A]................[data B]
2013.........................Q1.........................Jan........................SD-21...................13%......................0.05%
2013.........................Q2..........................Apr........................NV-12...................7%.......................6%
etc
I am hoping to have, on another sheet, a series of dependent drop boxes- Year, Quarter, Month, SKU- which after selecting then displays 'dataA' & 'dataB'.
So you could select- List 1: 2013 ----> List 2: Q1 ----> List 3: Jan ----> SD-21.................and then 13% and 0.05% are displayed.
The data will be continuously added to and so needs to be based on a dynamic data range.
I know that a pivot table is the perfect way to do this, however my bosses have requested that I do not use that format so it is easy for all staff to access.
So I think I need to construct some sort of dashboard sheet, I have experimented with OFFSET from other posts, but so far have had no joy.
Can you use Row & Column numbers in a Formula the way you can in VBA?
I want to do the same as Range(Cells(5,2)) in VBA EXCEPT in a Formula
because I want to use named ranges for the Row & column entries. (And I don't want to have to run a macro every time a change is made. The spreadsheet is huge enough already. It's slow on my machine & I have the biggets baddest PC in the company!)
Using Formulas only, (not VBA) I would like to create a Dynamic Named Range, LastUsedRow, which is the ROW NUMBER of the Last Used Cell in Column C
(it would = 470)
Also I have an existing Named Range HeaderRowNum (it = 16)
Currently I have a LOT of formulas like:
=SUMPRODUCT(($E17:$E470)*(--(CO17:CO470>0)))
problem is any new data must be added between Rows 17 & 470
So I would like to create dynamic new forumlas to read like:
SUMPRODUCT( (Cells(HeaderRowNum+1,5) : (LastUsed Row,5)) * (--(Cells(HeaderRowNum+1,93) : (LastUsed Row,93))>0) )...............
I have a long (~42,000) list of dates and times (some including zeros). I would like to name these ranges and use a formula to find the last entry in each column. I know the lists will never go over 45,000.
The data is in this format:
1/31/14
23:58:00
1/30/14
[Code]....
The data will not always be consecutive, so I imagine the criteria would be something like (if there were such a thing) "ISDATE" or something of the sort.
How would I write a formula to dynamically calculate the row number of the last date or time in the column? (In this case, it would be 6.)
I've got two pivot table reports working off one dataset.
I've named the range Recharge with the formula as below..
=OFFSET('Recharge'!$A$1,0,0,COUNTA('ABC Recharge'!$A:$A),16)
But this uses column A as the longest column... but sometimes it will be column I - how can the formula be adapted ? or can it be ? i've been looking at the Max function and trying to incorporate that but my limited brainpower has gone to mush.
How would I select a dynamic range in VBA without using name a range in Excel. I have searched for possible answers, however they use xldown, or xlup which works great for non-empty cells. My problem need to select the area where there are empty cells. Here is a snap shot of the data looks like:
Trade Date A B C D E
2008-Feb-11 450,432
2008-Feb-13
2008-Feb-15
The cell with number is where I got the formulas. Now i wish to fill that formula with the rest of the area. However, the problem is the number of rows and number of columns may change in the future. So I need to select those empty areas in a dynamic way.
Selecting the range from Multiple Column data.
Currently, it is:
[Code]....
I have data from columns A:E
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.