Dynamic Ranges (tables) Not Working On Protected Sheet?
Sep 10, 2013
I have a data set that is defined as a table (Ctrl + T). There are formulas so I locked those cells and Protected the sheet. If I am at the bottom right cell, and press Tab to add a new row, I get an error message: "Cannot use this table functionality on a protected sheet"
I really need to protect the cells with formulas so that the are not accidentally deleted. But I also want to retain the Table format.
Is there a way around this without using VBA?
View 1 Replies
ADVERTISEMENT
Jan 7, 2014
Worksheet A - I've set up a dynamic range to display the last 12 row entries of 2 columns
Worksheet B - pivot table of the range
The dynamic range is working perfectly, it displays the correct rows I can set up the data source once... the results on the pivot table display corectly
Problem When i press refresh, the data source "dissapears" and i have to rebuild the pivot table.
View 12 Replies
View Related
Jun 1, 2006
I did the huge macro that names a bunch of dynamic ranges, all similar to the following: Range("=OFFSET(BD!$C$32,0,1,1,COUNT(BD!$32:$32))").Name = "ChtBDLabel"
I tested it as I went along, so I know it was working. Then I worked on several other tasks (copying the range to another location on the sheet, making graphs from the ranges). Now when I go back to run this again, I get: Run-time error '1004':
method 'Range' of object '_Global' failed. I went and looked what I thought were my named ranges, and they were wrong (not dynamic, just a cell reference). I deleted them and tried again with same error.
View 3 Replies
View Related
Mar 25, 2014
I am getting a #REF error when using an INDIRECT function within a MATCH function to check against a dynamic named range. Basically, I am trying to get the row reference so that I can go back and extract other data from the row (in a table contained in another sheet) into the current worksheet.
I attach an example file for reference. The issue arises when a Dynamic Named Range is used. In the example file, if a value from a static range is chosen, the match with indirect function works, but it fails with the dynamic range.
Dynamic Ranges INDIRECT v2.xlsb
View 3 Replies
View Related
Sep 19, 2013
I have certain cells which I want the formulas hidden to the end user and protected so they can't update them.
I've locked and hidden these cells and protected the sheet however my Macro's fail to work thereafter.
Protect the sheet for the user interface only. This has to be done in VBA:
- Activate the sheet.
- Activate the Visual Basic Editor (Alt+F11).
- Activate the Immediate window (Ctrl+G).
- Type
ActiveSheet.Unprotect
- Press Enter.
- Type
ActiveSheet.Protect UserInterfaceOnly:=True
- Press Enter.
The sheet is now protected for the end user, but VBA code can freely manipulate it.This works well however when I go to another page and do the same it stops working on the original sheet.I would like to know if there is an easy way to:
protect/unprotect all sheets in one go and have the macros still work?
When I protect pages individually I want the following to be allowed:
Select unlocked/locked cells
Format
Sort
Use autofilter
use pivottable
I will first save which cells are un/locked & hidden.
View 9 Replies
View Related
Jun 1, 2009
I have a excel worksheet with hyperlink. If the sheet is protected I am unable to use the hyperlink even though I have unblocked the protected cells.
View 9 Replies
View Related
Jul 23, 2009
Me.Rows.Autofit with a Protected Sheet not working.
Basically I want to use vb code which is
View 2 Replies
View Related
Dec 20, 2012
When I either manually check the box for allowing sorting and autofiltering, or I do it through vba with:
Code:
With Sheets("Inventory")
.Protect Password:="###", AllowSorting:=True, AllowFiltering:=True, AllowUserInterface:=True
.EnableAutoFilter = True
End With
I still am unable to use the icons. The icons are clickable to filter or sort, but every time they say that the cells I am selecting are protected. I want them to be protected from editing the data, but want to allow them to be sorted or filtered.
View 1 Replies
View Related
Jan 9, 2007
I am trying to password protect some of the cells in a worksheet. However doing that starts giving errors with Macros. The Macros are no longer working and infact giving error. What can I do to stop that happening?
View 9 Replies
View Related
Jan 10, 2008
The sheet was working fine, then all of a sudden (i dont know what i have done) the up and down arrows (on my kayboard) wont work when the sheet is protected, when i unprotect the sheet they work fine, i can use left and right. i have checked the scroll lock isnt pressed/illuminated on my keyboard.
View 9 Replies
View Related
Feb 11, 2014
I have 7 sheets including the table as you can see on the attached. Now, each sheet is allocated to individual items e.g. item 10, item 20 and so on. I can't figure out how to return all the Item 10, 20, 30 ... to the corresponding sheet. It says Item 40 to all sheets.
View 8 Replies
View Related
Jul 7, 2014
I have a separate sheet that I will drop a csv file into. On another sheet, I would like to copy that data. I know how to copy a cell and drag it to collect all the cells for the first go around, and this would work great if only my csv file had the same amount of rows each time, which it doesn't.
Is there anyway to create a macro to copy a dynamic range of rows from another sheet?
View 3 Replies
View Related
Dec 22, 2009
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
View 9 Replies
View Related
Jun 21, 2009
I would like to replace the blue bit of this Dynamic Named Range (DNR) with an INDIRECT formula in order to modify the starting point for the DNR: =OFFSET(DATA!$C$60,0,0,20,1). Unfortunately, I can’t seem to get my INDIRECT formula to work in order to use it to replace the blue bit above: INDIRECT("'"DATA"'!&ADDRESS(MATCH('SHEET1'!AC8,DATA_Date,0)+22,3)"). The orange bit of the formula above returns a value of 60, therefore the ADDRESS formula should return $C$60, that can then feed into the INDIRECT and act as the equivalent of DATA!$C$60. But it doesn’t.
View 2 Replies
View Related
Sep 24, 2013
I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.
So far this is what I have but the dynamic range part is not working:
VB:
Sub Print_All_Worksheets_With_Value_In_A1()
Dim Sh As Worksheet
Dim Arr() As String
Dim N As Integer
[Code] ....
View 3 Replies
View Related
May 20, 2012
I have the following code which works fine when Sheet1 is unprotected (The code is placed in Sheet3)
however if I protect sheet1 then the code does not work
I have tried it with
Code:
ActiveSheet.Unprotect
Code:
ActiveSheet.Protect
it still will not work on Sheet1
here is the code
Private Sub Worksheet_Change(ByVal Target As Range)
Application.ScreenUpdating = False
On Error GoTo Handler
With Sheet1.Range("B6:B10045")
[Code] ....
View 2 Replies
View Related
Apr 23, 2008
I wish I could have been more specific with my Title. This is what I am encountering. I used the McGimpsey code for generating a unique sequential number every time a workbook opens. I tailored the code to fit my needs and stuck it into my invoice sheet. For the longest time I was unable to make it work until I moved the code from a template to a standard workbook. Then I was able to make it work as long as the sheet was unprotected. I realized that to get the code to work I had to then unprotect the cells that the code was writing to. Now that I've done that I am getting errors in the code that weren't there before, rendering the macro useless. The code I am using is:
View 14 Replies
View Related
May 4, 2008
Have a file that I have been coding and find when I open to a worksheet with limited access cells, the Up and Down arrows will not move vertically though Lrft and Right arrows OK though not raping arround. This problem may have been on for sometime and I haven't been back to it. Other Excel files all OK.
View 4 Replies
View Related
May 2, 2006
I am working with VBA to create a pivot table, and have done just fine so far. However, I need to create a two buttons that will run the following macros: 1. A macro that will remove the selected header (either row or column) from the pivot table.
2. A macro that will put the removed header back into the pivot table.
I need to be able to click on the header (whether its the row or column header) and then press the button to remove it from the table. The second button should then add that header back into the table. My code for creating the table is fine, I just need to work out the buttons. Below is what I have so far. I was think that if I had variable for the header name it would be able to tell which header to remove (so I used Set iField = ActiveCell.Value), I also tried ActiveCell.Text. All I need to do is put the text in the selected field into the PivotFields range to make it hidden. However, I keep getting an error (Compile Error: Object Required) on the line Set iField = ActiveCell.Value. Below is my current code.
Sub PivotTable()
ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:= _
"'Pivot Table Data'!R1C1:R1892C7").CreatePivotTable TableDestination:="", _
TableName:="PivotTable1", DefaultVersion:=xlPivotTableVersion10
ActiveSheet.PivotTableWizard TableDestination:=ActiveSheet.Cells(3, 1)
ActiveSheet.Cells(3, 1).Select
ActiveSheet.PivotTables("PivotTable1").AddFields RowFields:="Product", _
ColumnFields:="Location"
ActiveSheet.PivotTables("PivotTable1").PivotFields("Sales").Orientation = _
xlDataField
ActiveWorkbook.ShowPivotTableFieldList = False
End Sub..................................
View 4 Replies
View Related
Feb 26, 2010
definitions for static ranges and dynamic ranges?
View 9 Replies
View Related
Sep 23, 2013
I have a spreadsheet that records the date, specific sporting activities and cash award for participation in a round robin sporting event that was held over 52 weekends. I'm trying to lookup the cash award value of each event the person participated in by using a date range within the vlookup formula.
Each participant has their own spreadsheet which they are able to access via server, and each spreadsheet looks a bit like this:
-Column A contains the date of an event in which the person participated
-Column B contains a category number related to the type of event eg marathon = 12, hurdles = 15, relay = 18 etc. This info is manual input
-Column C contains the amount the person will be awarded by simply participating in the event. This is a lookup value and varies depending on the date the person participated, so I'm trying to incorporate date ranges and 'if' formulas into the vlookup
I'm from Australia so my dates might be backwards...
Spreadsheet:
A B C
1 02/01/13 15 (supposed to be $10)
The formula should read a bit like this:
if (date at A1 is within date range 1st Jan 2013 and 31st March 2013, lookup B1 in table 1 column 2), if (date at A1 is within 1st Apr 2013 and 30th Jun 2013, lookup B1 in table 2 column 2)...etc for each quarter
I don't know if the following is right
=IF(AND(A1>='01/01/2013'+0,A1='04/01/2013'+0,A1
View 5 Replies
View Related
Oct 29, 2013
I am trying to solve in VBA how to create pivot tables in new sheets using objects instead of relying on the sheetcounter, which errors out.
I found an old Tip on Mr. Excel: Excel Create and name a new worksheet with VBA
But I can't figure out how to apply the object to the rest of the script. Here is what I have so far:
Sub Macro2()
'
' Macro2 Macro
'
Dim WS As Worksheet
Set WS = Sheets.Add
'
[Code]....
View 1 Replies
View Related
Mar 13, 2014
I have done all the computation and final output was in the form of tables with different solution sets in one worksheet in an excel.
From the dropdown list (List of solution models), when I select one solution set it should pick that particular workout and populate the final output table in the new worksheet in the same excel. Firstly, I need to establish dynamic linkage between the drop down list and final output tables and then push the final table to new worksheet based on the option selected.
View 1 Replies
View Related
Mar 23, 2014
This example workbook contains a datatable, which is inputted via a userform. The datatable has 4 columns: Date, Invoice no., Loads, Tonnage. This table is dynamic, as a new row gets entered each time data is entered in the userform. A different userform (the one in the example) has comboboxes which refer to the data in the table. This userform asks the user for the Date, Invoice no., Loads and Tonnage. I want to use comboboxes so that they will advise the input based on the users previous input.
The first combobox asks the user for a data, and should contain a list of all the unique dates that are stored in the table. When the first combobox is inputted, the list for the second combobox will change. The list of the second combobox should be a list of unique invoice numbers, based on the date that has already been entered. The 3rd and the 4th combobox should also show a list of unique values, based on the previously entered date and invoice no.
Example: The first combobox should advise the dates: 4-Nov-14 and 15-Nov-14. User chooses 4-Nov --> second combobox should advise unique invoice numbers based on chosen date: 1252 and 1311. User chooses 1152 --> 3rd combobox should advise unique values based on previous values: 3, 8 and 7. 4th combobox: 57, 23 and 47.
View 3 Replies
View Related
Jun 20, 2014
I created a simply macro that will adjust the headings of a group of cells as follows.
But if I add a row/column to the sheet, it will then of course attempt to place the headings in the wrong cells.
I have now given that group of cells/range a Name of "AR_Buckets". But I'm not certain how to modify the macro to ensure it always places the information in the correct place.
[Code] ....
View 1 Replies
View Related
Feb 24, 2011
I am using Excel 2010 and I have a password protected workbook with password protected sheets that uses several macros. Most of them, in order to run, have to un-protect the sheet and then re-protect it again. This has been accomplished easily enough by adding ActiveSheet.Unprotect Password:= "mypassword" and ActiveSheet.Protect Password:= "mypassword" to the appropriate places in the script. All of my macros, which do various things like sorting and moving data, deleting blank rows, displaying dialog boxes containing warning messages etc. run fine.
My problem is this: when I password protect the sheets manually, I have checked the following options in the "Protect Sheet" dialog box. Under "Allow users of this worksheet to" I have checked 1)Select unlocked cells and 2)Format cells. After entering my password and closing the dialog box my sheet is protected, but I can edit cells in the manner my allowances permit. However, once I run any of the macros that un-protect and re-protect the sheet, I remain able to select and edit unlocked cells (practically, for my purposes, this means that I can input data which will appear in the default font size and color of the sheet) but I cannot format cells (which, practically, for my purposes would allow me to occasionally change the font color and size of the data). Naturally, after running a macro, the other cell-formatting options are unavailable to me as well. Is there any way to get my manual selections to remain in place after running a macro that functions as mine do? Or is there any way to make my manual selections the default settings for a protected sheet?
View 4 Replies
View Related
Dec 27, 2012
In the example I have attached there are two sheets, Details and DataTables. There are also a number of named ranges, both static and dynamic, that refer to data on the DataTables sheet. Most of the static ranges were added for debugging purposes. The tables have been shortened for this example.
On the Details sheet column A has a drop down that allows you to select the make of a device. Column B builds its drop down list based on what is selected in column A. The data validation in B2 uses a named dynamic range and the drop down does not work. The data validation in C2 used a named static range and the drop down works.
Column C will fill in the RU value based on what is selected in column B. Cell C3 uses named dynamic range and it does not work. Cell C4 uses named static range and it works.
I would like to used named dynamic ranges if possible so when data is added to the tables the named dynamic ranges will self adjust. Can what I want to do be done?
Dynamic Range.xlsx
View 8 Replies
View Related
Oct 28, 2008
I want to create dependent lists using data validation. The lists need to be created from ranges that will be growing as users add more data. I think the best way to create the list is a VLOOKUP. However, I am not sure how to use the VLOOKUP when the range is changing.
I have attached an example. I have a list on sheet "Vlookup" called "FRUIT" with "apple", "orange", "banana". Then to make the depedent lists I have created three other lists called: "APPLE", "ORANGE", "BANANA". I want to pull the COST from sheet "VALUES" into the lists "APPLE", "ORANGE", "BANANA". Users will be adding costs next to the FRUIT they purchase.
View 5 Replies
View Related
Nov 18, 2009
I have a particular issue - i am trying to create a rolling correlation.
lets say you have two variables for 3 different months:
Month1 a x
Month2 b y
Month3 c z
correlation will correlate a-c with t-v
however, come next month - i have to manually drag the ranges for a rolling three month correlation:
Month1 a t
Month2 b u
Month3 c v
Month4 d w
correlation will now correlate b-d with u-w for a the last three months.
I want to automate this as I know what the month is, I can't seem to return the last three months and correlate the data.
I have tried to do this with the database functions, but I think that they break the array relationship of b-d and u-w in the correlation function.
View 9 Replies
View Related
Jan 20, 2007
In the example I have attached, I need 4 named, dynamic ranges to build a chart with:
1) Dates for the chart
always starting from A2 ... to whenever the LAST sum of B, C, D =0
(right now that would be A2:A30)
2) The Amounts
I need the amounts as 3 individual dynamic ranges, with no 0 values
(example - B2:B21, or c10:c14, etc)
3)The date column
same as #2, but just a single cell reference to show as a marker on the chart.
(example e21:e21)
I know someone here will think 'so what's the big deal' and pop it out in 30 seconds.
View 10 Replies
View Related
