Want To Reference Another Cell Dynamically

Jul 13, 2009

I basically am trying to just reference another cell (from a pivot table) from another sheet. ='SHEETNAME'!G5

But I Need the G to change... I basically need
='SHEETNAME'! + E29 + 5 to equal

='SHEETNAME'!G5 assuming G is in E29 but am not sure how to do this.

The other option is to use =GETPIVOTDATA("Sum of Amount_19",'SHEETNAME'!$A$3,"Label","Title") but I need "Sum of Amount_19" to change based on another cell, lets say F29.

View 3 Replies


ADVERTISEMENT

Dynamically Reference Range Of Cells?

Jun 27, 2012

I have a 'receipt' worksheet with about 500+ lines of data, here is an example of what could be in cell A166: 1.1 NET_AMOUNT 742,523,253.83

In another worksheet, is there a way to look at the whole worksheet for column A in receipt to say:
if 1.1 is true, capture text to the right of 'NET_AMOUNT' then format using =Dollar?

View 9 Replies View Related

Reference Dynamically Created Label From A Class

Apr 27, 2014

The following code dynamically creates a number of textboxes within a frame with a label right next to it. There are two classes.

[Code] ......

The two classes look like this:

[Code] .....

This works just fine to create the dynamic series of textboxes and corrosponding labels. I am having trouble with the reference between them. for example (within the class module):

[Code] .....

As shown, the reference to the corresponding lable from within the class doesn't work. How to reference the correct corresponding label.

View 13 Replies View Related

How To Define A Cell To Be A Range Dynamically

Feb 14, 2013

The way I have try to define lastcell is wrong. But I don't know how to do it.

Code:
Sub createUniqueRecordID_2()
'
' fill using CTRL + ENTER
'
Dim lastcell
Sheets("projects list").Select
[a1].Select

[Code]...

View 1 Replies View Related

Formula To Run Dynamically When A User Changes Cell F27

Jul 25, 2006

I am trying to get the following routine to work. I need this formula to run dynamically when a user changes cell F27.

Sub PotentialUnitSales()
'Dim x As Range
Set Range("J27:J200") = "R[1]C[5]-(RC[5]-RC[3])"
'Range("J27").FormulaR1C1 = "R[1]C[5]-(RC[5]-RC[3])"
rng = Range([J27], Cells(Rows.Count, "J").End(xlUp))
End Sub

View 4 Replies View Related

Dynamically Determine Cell In Which To Apply Value

Jan 12, 2007

I've searched the forumn but have found no resolution to my dilema. I'm trying to accomplish the following:

I would like to apply an Alternate number to a job that meets a certain criteria. The criteria is based on a Marker, which should be automatically determined based on the count of total jobs that are Estate or Custom. The Alternate number needs to be applied to certain % of the Jobs. What I've done is to get the count of jobs Estate or Custom then based on the count I have applied the Alternate % to determine the actual number of jobs that should have the marker applied. Here is where I need the help. The next step would be be to apply the marker to the number of jobs. I'm not sure how I can accomplish this task. Attached is an excel spreadsheet with an example of what I'm trying to achieve as well as what the end result should look like.

View 9 Replies View Related

Dynamically Link Text Box To A Cell

Apr 23, 2008

In Excel have a customer list, and notes associated with each of them. On my form, where I perform a search (by customer name), I would like to link the Text Box to the cell with notes. How can It be done dynamically?

View 2 Replies View Related

Linking Dynamically To Other Workbook In Directory Specified In Cell?

Mar 6, 2014

Using Dropbox, a lot of people will fill in formulas in personal workbooks from using data from another, central workbook. Since I cannot control where they install Dropbox or where they keep their personal workbooks, I must account for that in functions.

Now, my idea is to make them define the directory of the source in their personal workbook in a specific cell and then using that as a basis for the rest of the functions.

Example

Cell A1: C:Usersuser1Dropboxfolder (copy paste from path in Windows Explorer)

Cell B1: A1&[CentralWorkbook.xlsx]SheetName'!$H$1

Basically I want the unknowing user to copy-paste the path of the central workbook into a specific cell in their own workbook and then build my functions bsed on that. How can this be done?

View 2 Replies View Related

Dynamically Adding Row Blocks Based On Cell Value

Apr 2, 2014

I've managed to get coding that allows me to insert single rows dynamically based on a cell value. Example is if I enter a value in cell C3 the coding inserts the same number of rows below.

I've also created a simple macro that inserts a multiple row block under the active cell, complete with formatting, text and some merged cells. Example is I run the macro and it will insert a block of 3 rows, complete with formatting, borders, text and merged cells.

My challenge is to bring these two elements together. So enter a number in a single cell which will then insert the same number of row blocks, complete with formatting etc. I've added a file to sample what it is I'm trying to achieve. I can add the coding I already have as well.

Dynamic list sample.xlsx‎

View 2 Replies View Related

Dynamically Alter Macro Based On Tab Name Or Cell Value

Feb 1, 2014

I have a workbook with several tabs. One tab is named for the year eg 2014. Annually, I open the workbook, rename to the new year and rename the year tab to the next year eg 2014 to 2015. All the dynamic range names update as expected. Sheet2(2014) becomes Sheet2(2015). However, a line of macro code does not change and errors out because the year does not change.

Is there a way to dynamically modify the '2014' sheet reference to reflect the renaming of the year tab eg to 2015 or to reference a helper cell named YEAR?

The cell referenced above R332C1 is dynamic.

I have tried writing the above line many ways based on internet research but no success. I suspect I can use a LEN function to actually modify the line of code but I'm not sure its even possible to alter a macro dynamically to meet my needs here.

View 6 Replies View Related

Dynamically Refer To A Cell In A Macro Formula

Feb 17, 2009

I want to write a formula that inserts a column and then does a vlookup in that new column using the cell just to the left of it as the first variable. The problem is, this could be in any random column so I can't do a static reference to $A2 as an example. So, my question is...

Instead of using =vlookup($A2,Sheet1A1:B50,2,false)

How do I replace the $A2 part with some code that says, "the cell to the left of here..."

View 7 Replies View Related

Change External Link Dynamically With Cell

Apr 14, 2008

My Example

I have Master Book1 which has external links to Book2, Book3 and Book4.

My Formula in Cell B2 is ='D: empxl[Book2.xls]Sheet1'!$A$1

In Cells A1, A2 and A3 I have the text entries 2, 3 and 4 respectively.

Is it possible to use these Text entries to update the Formula I plan to copy down from B2 onwards?

i.e. Formula would read something like ='D: empxl[ Book"A1".xls]Sheet1'!$A$1

View 4 Replies View Related

Change Formula Cell Reference Based On Another Cell Reference

Jan 8, 2012

How do I change a formula cell reference based on another cell's reference? I'm building a schedule that looks to a task's trigger and adds days based on that relationship. All entries in column "A" will be text and all cells in "B" will be the simple formula "=A2" or "=A3". Due date is calculated by adding the value in "C" to the preceding date in column "D". In the spreadsheet below, the trigger for "Budget set" is "Specs written" with 3 days added to the previous due date.

________A________________B_____________C_________D
1 Task___________Trigger_____________Days_____Due Date
2 Design begins__Proj OK______________10____10-Jan
3 Specs written__Design begins (A2)____5____15-Jan (D2+C3)
4 Budget set_____Specs written (A3)____3____18-Jan (D3+C4)

If the trigger for A4, "Budget set", changed from A3 to A2, is there a way that the formula that determines the due date in D4 could read the trigger cell reference in B4 so that the value in the corresponding row in column "C" is added in the date column?

View 4 Replies View Related

Assign Names Dynamically Based On Cell Content

Jul 10, 2009

I do have a data set from A1:C8 as follows:-
Brand Name(A1)Sales Value(B1)Margin(C1)Levi's100002000Arrow150002500Allen Solly120001300Hanes80001000John Miller250004500Disney280003200Ray Ban180002100

The above brands are categorized as follows:-
Brand NameProposed CategoryLevi'sConsignmentArrowBrandAllen SollyBrandHanesBrandJohn MillerPrivate LabelDisneyBrandRay BanConcessionaire

I would like to put formula from D1:D8 in such a way so that the Proposed categories are extracted automatically through formulae. This will help in getting the contribution calculated from different categories.
Brand Name(A1)Sales Value(B1)Margin(C1)Category(Desired Result)(D1)Levi's100002000ConsignmentArrow150002500BrandAllen Solly120001300BrandHanes80001000BrandJohn Miller250004500Private LabelDisney280003200BrandRay Ban180002100Concessionaire

View 9 Replies View Related

Dynamic Table: Get The Formula In The Cell To Update Dynamically

Aug 21, 2006

I have a table which takes the average of the last three years. The formulas are in cells below the data. The data is set up to be first data down to the oldest data. each time data is added, a row is put in on top. how do i get the formula in the cell to update dynamically. What would the average formula look like in the cell? Do you just say =average(name of file!RANGENAME).

View 5 Replies View Related

Dynamically Create Named Ranges Based On Cell

Dec 16, 2007

I am looking for a solution to dynamically create named ranges according to the contents of cells in a particular column. The following code works for 1 word names, but in many cases the title cell contains numerous words separated by spaces. Is there a way I can adapt this code so that it will name the ranges with the spaces removed? For example, where cell C2 contains the narrative 'Sales Ledger Control', I would want the range name 'SalesLedgerControl'.

Range("R2:Z2").Name = Range("C2")

The named ranges are referred to in numerous other worksheets, where selecting a particular narrative from a listbox creates a dependant drop-down in the adjacent cell (eg if Sales Ledger Control is selected, the dependant list contains names of customers). FYI, the data validation in the other worksheets ignores the spaces in the range names, ie: =INDIRECT(SUBSTITUTE(G2," ",""))

It would not take me long to name the ranges manually, but a macro is preferable because the narratives in the title cells will often change and the range names will obvioulsy also therefore change.

View 4 Replies View Related

Dynamically Fill Range Of Columns Based On Value Of Cell In Another Sheet

Feb 24, 2014

I wanted to enter value in sheet1 on A1. Columns in sheet2 from B1 until the value entered in sheet1.A1 should be automatically filled.

E.g.

Sheet1.A1=5, then Sheet2.B1=1, Sheet2.B2=2, Sheet2.B3=3, Sheet2.B4=4, Sheet2.B5=5.

if Sheet1.A1=3, then Sheet2.B1=1, Sheet2.B2=2, Sheet2.B3=3.

if Sheet1.A1=7, then Sheet2.B1=1, Sheet2.B2=2, Sheet2.B3=3, Sheet2.B4=4, Sheet2.B5=5, Sheet2.B5=6, Sheet2.B5=7

etc.

View 2 Replies View Related

Sum A Cell Dynamically Based On Another Cell

Aug 2, 2006

I have a spreadsheet which I use a number in cell E4 which can be an integer for instance let's say E4=9.

I want to go down a column and get the sum dynamically for let's say when the cell in E4=3.

The range in column G starts at G27. I then want to return the dynamic value to cell E3.

What is the best way to accomplish this using vba code?

View 9 Replies View Related

Absolute Reference (cell Reference Behind The Table)

Mar 11, 2009

I have a table that displays data from another worksheet. This is what the cell reference behind the table look like:

View 2 Replies View Related

Cell Reference :: Formula To Reference New Cells

Feb 15, 2010

I have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.

EXAMPLE:

12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.

View 14 Replies View Related

Convert Cell Reference To Worksheet Reference

Jul 20, 2014

I have a workbook with 1000+ worksheets, all of which have 3-letter names. On a master sheet, I would like to make a query of how many non-empty cells there are on a subsidiary worksheet. This works:

Code:
=COUNTA(ABC!A:A)
What I'd like to do from time to time is input in column A a varying set of 3-letter worksheet names, say

AAB
ABC
CDE

And have a formula in column B that converts this to

=COUNTA(AAB!A:A)
=COUNTA(ABC!A:A)
=COUNTA(CDE!A:A)

I've learned that simply substituting the cell references A1, A2, A3 for AAB, ABC and CDE doesn't work. What do I need to do to achieve this?

View 2 Replies View Related

Reference To Cell Column Letter By Reference To Another Cell Value

Apr 25, 2014

Let's say I've ended up with the number 8 in Cell D4 for example. Is there a formula that can return the letter "G" (The 8th Column) so I can use it in future cell references ? If so, let's say we store that in Cell B5. How do I now refer to a cell in a chosen Row of that same Column by reference to Cell B5 ? For example if I want to refer to Cell G33 can you refer to this Cell in some form like Cell(Contents of Cell B5;33) ??? Don't want to use R1C1 type references if possible.

View 9 Replies View Related

Cell Reference- Able To Reference Two Cells To The Left Even As More Cells Are Added

Jun 11, 2008

I have 5 columns set up: A,B,C,D,E
D is the sum of A and B
E is the sum of A,B,and C

As I add in a new column to the right of C (call it C2), I need D (which has shifted over one) to sum A,B, and C.

I also need E (which has also shifted over one) to sum A,B,C, and C2.

Essentially I need a function in a cell that will be able to reference two cells to the left even as more cells are added.

View 9 Replies View Related

Circular Reference: Cell References In The Formula Refer To The Formula's Result, Creating A Circular Reference

Aug 14, 2006

I have the following formula in cell L51 of all sheets calculating the volume depending on the monthly index that is chosen from the drop down menu in a particular sheet. =If(MIndex=0, SUM(D33:L50),If(MIndex=1,SUM(D34:L50),If(MIndex=2,SUM(D35:L50), 0))). I am getting the following message and I do not understand what it is about.

Microsoft Office Excel cannot calculate a formula. Cell references in the formula refer to the formula's result, creating a circular reference. Try one of the following

View 3 Replies View Related

How To Match A Cell Data With A Range Of Cells And Return Cell Reference In Another Cell

Dec 12, 2012

i want to match a cell data with a range of cells and if matches return the cell reference in another cell

View 3 Replies View Related

Look At Data From One Cell Reference Another Cell Then Display The Results From The Cell Next To It

Jun 19, 2008

I have 2 problems relating to LOOKUP.
Not sure if Excel can perform these calculations as they could get to complex.

Problem 1
Can it be possible to have excel look at data from one cell reference another cell then display the results from the cell next to it in another cell, sort of example:

Tab 1 (Never changes)
AB
Bob1
Jon2
Fred3

Tab 2 (Dynamic, changes each week)
AB
Jon
Fred
Bob

So it would work as follows.
Tab2 column B will take Tab2 column A’s data check Tab1 column A and display Tab1 column B’s result.

Problem 2

Weekly league rank table that shows position movements week by week
Example.

Week1
1Jon
2Bob
3Fred

Week2
1FredUp 2
2BobNot Moved
3JonDown 2

Can Excel calculate/show the actual movements of league positions?

View 9 Replies View Related

Looking For A Solution On How To Convert A Returned Cell Address To A Cell Reference

Dec 2, 2009

I have a formula (AL15) to determine the address of the last column with a value greater than 1. =COUNTIF(C16:AC16,">=1")+2. I then use this column value to aquire the Absolute row "15" and the determined column=(ADDRESS(15,AL15,4)). This returns to me a Column value and row value that I need to use as a refference. How can I convert this returned value to a reference.

View 2 Replies View Related

Change A Macro To From And Absolute Cell Reference To Selected Cell.

Feb 5, 2010

i am currently using the macro below to import text files into a spreadsheet. Currently, it begins the import in cell A1 which is what I recorded it to do. how do I change the code to begin the import on the active cell?

View 2 Replies View Related

How To Automatically Update Cell Format In Cells That Reference Another Cell

Feb 22, 2012

Cell C3 has "Joe"

Cell X44 is a VLOOKUP that retrieves "Joe"

Let's say Joe goes on vacation. The workbook user goes in and puts a blue fill in C3. Cell X44 would also need to change automatically.

What's needed to make this happen?

View 1 Replies View Related

Use Text In A Cell For A Formula As Cell Reference To Create Range

Mar 10, 2013

I have a list of headings and items and I have a set of formulas that work out depending on the heading what items are listed.

Say theres 10 items and the heading starts at C4 and that heading has 10 items, so it puts "C5" as text in G1 and "C15" as text in G2 so i now know my cell range of items

How can i use the text in those cells to put in a formula to call that as a range?

If I use the indirect formula it shows me the value of the cell, but im after using it to reference the cell

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved