In the attached sample workbook I am trying to add the vendor number down the column H for each PO. I have copied a few of the numbers into the column, (in red), to show the desired result.
Basically, I will have a report daily with a variable number of suppliers, and variable PO's for each supplier. I need to add the vendor # to each row.
I have a worksheet (A) similar to the following:
Jan '12, Feb '12, Mar '12 --> Header Row
-5, 10, 2
6, -2, 3
5, -2, -1
I have another worksheet (B) with the same header Row (Jan '12, Feb '12, Mar '12). I need to create formula in cell A2 on worksheet B (right under Jan '12) that dynamically locates the Jan '12 column in worksheet A and then sums the numbers in that column only if they are < 0.
So in cell A2 on worksheet B (under Jan '12) I'd have -5 (only -5 is < 0), in cell B2 on worksheet B (under Feb '12) I'd have -4 (-2 + -2) and in cell C2 on worksheet B (under Mar '12) I'd have -1.
I've tried several variations of sumproduct, sumif, index, etc. with no luck.
In the following code, you will find a sorting function with a range is hard coded. Instead of hard coded value which is marked with red colour, i need to find that range value dynamically. How to write a code to find that ?
View 2 Replies View RelatedI have a worksheet that has a column labeled "Sort Order". It is always the farthest, right-hand column. I also have a macro that sorts and re-numbers the data in that column.
My problem is that I am constantly inserting columns, so the label/count of the actual column to be sorted changes. How do I write the VBA code to automatically determine the last column?
Data manipulation question here: how to dynamically filter and sort a multi-column data set? My end goal is to be able to (1) quickly collapse all columns into one single column, (2) remove all duplicates, and (3) sort the information in ascending order. A reference sheet is attached in case it's useful.
View 5 Replies View RelatedSo I have exported a canned report showing me payments by day and it is EXACTLY what I need EXCEPT the dates don't repeat (and it has spaces and some headings but those aren't a big issue). Anyway, I need to dynamically fill in these dates for an entire year.
To be clearer, column A starts off with 1/1/2013 and column B has payment amount, column C check number, D invoice number etc.
But the rest of the cells in Column A for 1/1/2013 after the first row are blank until you hit the payments for 1/2/2013. Then 1/2/2013 is listed once and then blank (or junk header data at a page break) until 1/3/2013 and so on. And of course there are different numbers of payments for each day.
I'm looking to dynamically fill in the dates so that I have a real data /flat file that analysis can be run on. I have some ideas ... Could probably incorporate a "do until" statement somehow...
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
This is what I need:
Columns B, C, D & E are all populated with 3 digit numbers.
I would like column F to automatically populate with any of the 3 digit numbers that share two numbers, i.e.
F2 might look like this (using 00 as the pair):
001, 040
F3 might look like this (using 01 as the pair):
701, 051, 110, 001, 120
F4 might look like this (using 12 as the pair):
123, 721, 281, 912, 112, 120
etc...
Say column A has either numbers or text in each cell, I need a macro to only get each number in each cell that is not a duplicate of a number in any previous cell and list each number found down column B.
View 5 Replies View RelatedI have a column of variances, these contain both negative numbers and positive numbers. I want to gather a sum of all the negative numbers and positive numbers separtely. Basically saying all the positive overeages = this amount And all the negative shortages = this amount. you can see the attached sample.
View 3 Replies View RelatedI want to delete rows in whole list and numbers of rows to be deleted I have in for example C column. How to do it?
View 9 Replies View RelatedIs it possible to delete a column of numbers then replace those numbers from adjacent columns and the adjacent columns are then filled with the numbers adjacent to them
View 9 Replies View RelatedI'm working on a spreadsheet with about 400 rows and 10 columns. All the numbers in the columns are formatted as text, which doesn't allow me to use AutoSum. I have selected the cells and formatted them as number with no decimals, but AutoSum still doesn't work because the formatting hasn't changed and they're still formatted as text. I know if I double click each cell, the cell changes the format from text to number, but that will take a lot of time to change 400 cells in each of the 10 columns. What can I do to quickly reformat the cells from text to number?
View 1 Replies View RelatedI'm trying to pull some numbers from another column. I want to pull the numbers that have an X separating them like 7X125, 48X192, and 27X90.
Example:
FA, VF-2000-3-7X125-18-A, AFS
FA, VF-2350-48X192-6-RGB, FC
FA, VF-2020-27X90-18-A,RFI, FEX, ACP, 2IT
These telephone numbers have changed so I want to add new numbers to the numbers in column with red color
View 3 Replies View RelatedI have taken over this spreadsheet for my work, and it is basically a statement in excel. What I want to do is find a list of invoice numbers in column B populated from a remittance, and then replace column F to say a specific thing depending on check number and date paying for that invoice. So if a check printed today I would have it replace column f to say paid 1/31/13 check # xxxxx. Currently I am searching for each invoice indivudually and then replacing with check number and date. There are about 200 invoices per month that I deal with, and it is a big waste of time!
For example from this
invoice #1 / reconciled (DATE)
invoice #2 / reconciled (DATE)
To this:
invoice #1 / paid (DATE) check # (xxxxx)
invoice #2 / paid (DATE) check # (xxxxx)
I am trying to find the median of a set of numbers on a column that correspond to dates on the left column. I want a monthly median average of the numbers on the right which correspond to the dates on the left. So for example. I want to make an equation that gives me the median of all the numbers on the right if they fall within the range of a certain month(in this case October). I've tried These:
=IF(COUNTIFS(A:A,">=10/1/12",A:A,"
I am looking for a formula that will find the lowest 5 number group in column A with a total value from column B under $100 in the below table.
1 $28.75
2 $28.00
3 $27.75
4 $24.75
5 $25.50
6 $25.25
7 $25.25
8 $16.50
9 $24.75
10 $26.50
11 $24.50
12 $27.00
13 $26.50
14 $23.50
15 $23.00
16 $19.25
17 $20.75
18 $25.00
19 $20.50
20 $20.50
21 $17.75
22 $22.50
23 $20.50
24 $19.75
25 $20.00
26 $10.75
27 $11.25
28 $5.25
29 $13.00
30 $9.00
How would you set up a macro to delete numbers in a spreadsheet in one column that appear in another column or worksheet?
In other words, if I have the numbers 1,2,3,4,5,6,7,8,9, 10 in one column and in the same column, or another column or worksheet I have the numbers 1,2,3,4,5 - I need a way to delete 1,2,3,4,5. I know how to delete duplicates via the advanced filter but I want to have the duplicate and original deleted.
In Column A I have numbers ranging from 0 to 500, I want to consolidate these in column B or C to pull through all numbers >0.
I have a formula but its pulling through everything except for the blanks:
=IFERROR(INDEX($A$2:$A$1700,SMALL(IF(ISNUMBER($A$2:$A$700),ROW($A$1:$A$699),""),ROW(A8))),"")
how i can amend my formula or create a new one?
I have a worksheet which basically tracks time. the time is reported in Column C. In that row in Column E, there is a validation list with about 6 different categories in it. On the side of this "table" I have a list of all the categories and I want a value to be next to it that reports the sum of time (C) for each category (E).
So for the "Routing" category, I would want the value to be the sum of just data on the timesheet that have "routing" in Column E.
Column A contains numbers 0, 2, 0, 0, 5, 6, 0, 8 (in cells A1 - A8 respectively)
Can I write a formula to make column B contain only the non-zero numbers (2, 5, 6, 8 in cells B1 - B4 respectively)?
I have a spreadsheet which will be completed by numerous users, with a worksheet reserved for each area. The spreadsheet is to record the number of days lost to training etc on a weekly basis.
Each worksheet has 3 columns – column A DESCRIPTION, column B WEEK COMMENCING DATE and column C DAYS LOST.
The table will be completed by the manager’s as the info becomes available to them.
I will be collating the data on another worksheet and need a formula that will look in column B for all instances of 01/10/07 and then sum the corresponding cells in column C, then do the same for 08/10/07 and so on.
I have attached an example of a page.
I thought it may be VLookup or Sumif, but I don’t know how to go about it.
I am using the following array equation to return the value in column 1 for the smallest 5 numbers. It works for small 1 and 3 but i get a #NUM! for 2 , 4 , and 5. The smallest 5 numbers are:
0
3.196408441
4.491972091
4.491972091
4.491972091
Equation:
=INDIRECT(ADDRESS(SMALL(IF((NumRange)=SMALL(NumRange,1),ROW(NumRange),""),1),1))
I have a link
='S:2014DomesticATL[ATL-BP Eval-2014-04.xls]Business Partner Evaluation'!F$13
Now i have to compile 3 years of data for 200 airports so changing the month and year for every airport would be a challenge. I can do Replace all and change the year and month but instead of that i was thinking if i could have the year and month on one row and connect the links to that cell so that whenever i drag the cell my link changes
im looking at
2014DomesticATL[ATL-BP Eval-",D2",.xls]Business Partner Evaluation'!F$13
where in D2 i will have 2014-04 . But this formula doesnt seem to work. Is there anyway i can do this ?
I have a list of about 3,000 names and places of work, in two columns. What I want is to have the place of work in the first column, and then all the employees along that row.
There must be a simple solution to this, but I have been banging my head on my desk all morning trying to work it out. All the places of work are sorted, if that makes any difference.
I have a cell range of L3:N3 on Sheet 1 and on Sheet 2 in A1 i have the value of N3 of Sheet 1.
Now, if I move L3:N3 to eg. R10:T10 I want the value A1 ( Sheet 2 ) to be updated to T10 ( Sheet 1 )
Right now, it wont update dynamically, value of A1 stays at N3...
I basically am trying to just reference another cell (from a pivot table) from another sheet. ='SHEETNAME'!G5
But I Need the G to change... I basically need
='SHEETNAME'! + E29 + 5 to equal
='SHEETNAME'!G5 assuming G is in E29 but am not sure how to do this.
The other option is to use =GETPIVOTDATA("Sum of Amount_19",'SHEETNAME'!$A$3,"Label","Title") but I need "Sum of Amount_19" to change based on another cell, lets say F29.
Is it possible to access other tabs on my spreedsheet dynamically? =COUNTIF(July!$F$4:$F$200,$H7) not dynamic
A1 = July. =COUNTIF(A1!$F$4:$F$200,$H7) dynamic. but how is this done in Excel?? Is it possible?
I'm pulling data into some graphs from multiple sheets. The data I'm after is in the same place in each of the sheets, and the sheet name is varying only in that they refer to different dates, such as "01-11-13", 02-11-13 etc...
How would I go about dynamically picking up the sheet name. and referring to it?
For example if I have a column with all the different sheet names in it:
Col AA:
31-10-13
01-11-13
04-11-13
etc!