Transfer Data From One Worksheet To The Next By Matching Column Headings
Feb 25, 2012
I have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):
Date Amount Title
I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".
with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.
1) I have a Master worksheet that combines/appends data from 5 worksheets. The data in the 5 worksheets is cleared on a daily basis once data has been transferred (using a macro) to the Maser sheet.
2) I use the Match and Index formula for the 5 sheets. Column A "Symbol" being the primary value
Problem:
I have Matching column headings " Date" in 2 worksheets, I can only use date data from one of the sheets that contain the date column data. Here is the formula I use in the master to accept data from the worksheet
=If(Sheet1!C2=0,"",Sheet1!C2)
Sheet1 has the column heading "Date" that is linked to Master Worksheet column Heading "Date". Is there a possible way to re-write the formula where It can accept data from either sheets instead of only 1 sheet?
Going back to the fact that I have 2 date columns in 2 worksheets Lets say for example;
I have Symbol AAA in Sheet1 I have Symbol ZZZ in Sheet2 I have Symbol GGG in both sheets......................
I have some specific requirement and it would be great if I could do it through macro. Also attached a sample excel file for the requirement. I have raw data in a worksheet (WS1) that I receive daily from factory. There is another sheet in a different workbook (WS2) that has format specified on how to display this raw data. The order of raw data on WS1 remains same. The question is that how do I replace the format titles with raw data?
For example, in the attached excel sheet, sheet "data" has list of values. Sheet "format" says how to display data. Sheet "output" is output that I finally want to generate. The sheet "data" will always have data in the same order. I need to read values and replace the format title ( name, age etc) with corresponding values on "data" sheet.
1) I have 2 worksheets that contain 2 matching name columns; " Date" and the primary column A "Symbol". The rest of the column headings in each of the worksheets are different. Data (from internet sources) is inserted into the worksheets in table format on daily basis
Sheet 1 name = Data 1 Sheet 2 name = Data 2 Master worksheet name = MERGED DATA
2) I use the Match and Index formula for both sheets
the following formula is inserted in row 2 of Data 1 and Data 2 sheets (other than Col A "Symbol")
I have an array of data with multiple codes stored in text...
I want to set a formula in a cell to look for all instances of specific text in an array. Then compare the value of all of the column headings, which are numbered across the top of the array, which contain a match in that column and return the highest value.
Example: 10x10 array, columns 1,3, and 5 contain "text" somewhere in those columns. Formula would return 5.
I want to filter the data and next. I want to copy the data from sheet1 to sheet2; below code working fine, but.
Sub CopyFilter() Dim rng As Range Dim rng2 As Range With ActiveSheet.AutoFilter.Range On Error Resume Next Set rng2 = .Offset(1, 0).Resize(.Rows.Count - 1, 1) _ .SpecialCells(xlCellTypeVisible) On Error Goto 0 End With If rng2 Is Nothing Then MsgBox "No data to copy" Else.............................
transferring data from a worksheet (Passdown Report) to another worksheet (Data Base) located in the same workbook. In the source worksheet (Passdown Report) there are 2 cells (B2 and D2) in which I would like the data to be transferred along with the data from B4 to AQ33. All the cells contain a formula which I want to stay after the information is transferred to the target worksheet (Data Base). This will be a daily transfer to the target worksheet (Data Base), so the macros should also identify the next available open row to transfer the data to.
I receive a monthly download of individuals call-logs in one "Master File." For internal reasons, I need to separate every person's monthly call-log into individual worksheets. Unfortunately, the file is very large and copy/paste is very time consuming. I am operating on MS Excel 2007.
Is there a way I can return a column heading(s) if text is present in a row?
Refer the attachment... ozgrid.xls
Names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'???
Simple macro formula. I want to have my function to insert a column and copy over some data headings here is what I have...
Sub Macro17() ' ' Macro17 Macro ' ' Selection.End(xlToLeft).Select range("D5").Select
[Code] .........
The issue I am having is that is it inserts the column AA (end of the original data) and I want it to insert at the end of all the data. For example if I run the macro once it posts in column AA, I want the next result to post in AB but it posts in AA.
is there a way I can return a column heading(s) if text is present in a row?
refer the attachment...
names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'?
I have a workbook with 2 worksheets, Sheet1 and Sheet2 have the same column headings in Row 1 but they are not in the same positions.
What I need to do is read the column header in Sheet2 Column A (Cell A1) and copy the data from A2 to last row and paste it in Sheet1 in the first empty cell under the same column heading, which may be the Column D position instead of Column A like in Sheet2.
It needs to loop through all the columns in Sheet2, copying the relevant data to under the correct header in Sheet1.
I have a table of data with column headings. I'd like to be able to filter the table based on the column headings, however I have a 'spare row' between the column headings and the data which I use to add new entries to the table using a macro (the macro copies the row and pastes it in one of the empty rows at the bottom of the table, then sorts the data which places it with the rest of the data).
The problem is, Excel won't let me apply a filter to the table if the column headings are separated from the data that I would like filtered.
i need a macro that will copy data based on the column headings, i have two worksheets, the first worksheet is the raw data and second worksheet will be the results sheet, the issue is the headings i have in raw data is different to the headings i have in the results sheet and the heading will not always be in same column in the results sheet, so for example in Raw data i have heading Quantity and in destination sheet i have heading Units, so the macro should copy the data for quantity in sheet raw data and paste to sheet "Results' under heading "Units". The header row on both sheets is row 3. I do have more headers but if I know how to do one then i can apply the same method for the others.
I have 3 worksheets- Sheet 1 and Sheet 2 will have data from the customer that I need to transfer in Sheet 3 as a summary. So if 5 rows are filled in Sheet 1 and 6 rows in sheet 2, VBA code that can transfer data from sheet 1 and sheet 2 to sheet 3 all one after other (i.e. have 11 rows total). The current code formula i have just replaces data that was filled in from sheet 1 to sheet 2.
How can I move every row data to another sheet, when the print(moving) button will shown i every row. Problem is that i need write a code and insert button for every row, how to automate this proces. So the main key is that, i can chouse wich row i want to transfer to another sheet.
but it is not doing what i want and think i need some vba coding which i am not up to speed with. Basically i have an excel workbook containing a number of worksheets and what i want to do is enter data on the 1st worksheet which then populates the summed data into a second worksheet into a specific column dependant on the week no. that appears in a cell on the 1st worksheet. eg. the week number will appear in cell H53 the details in the sum of H12:L12 would then appear in cell I4 under the column heading Week 1 in the second worksheet, the sum of H13:L13 would then appear in cell I5 and so on. Where my "if" statement falls down is when the week number changes to "2" all the data under the column heading week 1 disappears but i need it to remain and the data for week 2 to be placed under the column heading week 2 in the second worksheet.
I Currently have some VBA sourced through here which adds to the end of the first instance of a value in column A the values in column's B and C and repeats adding values in new cells for B and C until the value in column A changes.
Now I need to transfer this sorted data to another worksheet (destination.xls) and add it by the reference number in column A to the end of the row with the same reference number.
I have experimented with vlookup with limited success and am looking for a more robust solution.
The data from the spreadsheet called source.xls appears starting in column EE. This will be the same starting position for all rows I have coloured the data for ease of recognition purposes only.
I have attached 2 sheets as examples of what I am trying to achieve.
My goal is to create a tracker for my work. This tracker would have the data collection in a seperate excel worksheet using forms (embedded), where all of the information initially goes, then with the click of an "Add" button, it formats the information in the cells in the appropriate worksheet (ie: good data goes to the worksheet called "Good" and vice versa for "Bad"), clearing the data from the forms, and preparing for the next bit of information.
Date Time Name Notes Type (2 radio buttons that categorize the ) Completed tasks (checkboxes stating "Did I do this", "Did I do that", etc.)
I need a temporary database. What I need to do is to transfer data from each tab to a Masterfile tab. For example. I have Jan 1, Jan 2, Jan 3 tabs I need this to automatic transfer to Masterfile tab. I know I can copy/paste this BUT I have a LOT of data's like way back to June 2013 to present so I really need a way to do this easier.
I have a table with 150 or so Job Titles down the first column. Across the top row, I have 25 or so courses listed. There are Xs in the table indicating which courses are required for each job title.
This worksheet is intended to be used by individuals who will look up their job title to see which courses they must take. My goal is to simplify this process. I would like to create a worksheet in this workbook which has a drop down list of job titles. When the title is selected the data will transfer to a table on this new worksheet.
I've attached the spreadsheet I have and it's pretty self explanatory.
I already transfer my data from database (excel.xlsm) to an old worksheet (excel.xlsx) with a table by using VBA. Now I want to make this old worksheet become a new file with new file name like yyyy/mm/dd/where. Is that possible?
I have a large data ... my problem is that I want the data is segregated automatically without manual filtering. in my data there are approximately 1000 individual name data, i need information about one person automatically segregated in one worksheet
A B C D
[Code]....
for example; in the table we can see the red colour font in column D, that is the name person, what i want is data for one person automatically transfer to another sheet..example : Annamalai data to Sheet2, Koh Che Kuan to Sheet 3, Rashidah to Sheet 4..etc
I am making a userform that is activated once the user highlights a bit of spreadsheet and clicks a button on the command bar, here is what I want it to do:
1. (copy data from the spreadsheet this is tricky because I am trying to have it be a conditional situation where the user highlights a place on the spreadsheet and whatever that place is at the moment, it will get copied to a variable on the form. There are 8 fields to highlight and copy, two with info that wont be copied onto the new spreadsheet but will be used to update fields and make the filename.)
2. make a new spreadsheet: a. the filename is made from cell values in the 'from' and 'to' columns and the date.
b. new spreadsheet needs to have a template section from a7:f7 that has 4 fields that will be filled in from the fields on the form.
c. copied data is to be moved from old spreadsheet to new spreadsheet to cell a8. There should be 6 columns that will be filled with data.
3. on the form there will be a browse button to save the file in a location specified by user and 'last saved location' name should be saved to a textbox.
I read about a browse button here that I would like to use, but I have to adapt it so it can be used in the 'browse' button. [url]
I dont even know if it is possible to copy a user-specified range. It seems that it should be, because when a user highlights an area, that area is being held in memory as a position... I tried passing these values to another sheet but it wasnt successful. I tried to dim 'selection' as string and pass it into a variable, but I am new to variables and this project is a big experience for me in vb.
I also am still learning about how to make values in a field pass to another field on a spreadsheet.
I try to transfer a data from multiple worksheet in a same 2 identical workbook. One I keep for me and the other one will be update by the user. So I need the data update by the user can be transfer to my workbook and only the new data not the one that already in my workbook. I try with the code below but it seem not working. The code run but nothing being transfer.
