Transfer A Matching Column Headings' Data In 2 Worksheets To 1
Sep 18, 2006
1) I have a Master worksheet that combines/appends data from 5 worksheets. The data in the 5 worksheets is cleared on a daily basis once data has been transferred (using a macro) to the Maser sheet.
2) I use the Match and Index formula for the 5 sheets. Column A "Symbol" being the primary value
Problem:
I have Matching column headings " Date" in 2 worksheets, I can only use date data from one of the sheets that contain the date column data. Here is the formula I use in the master to accept data from the worksheet
=If(Sheet1!C2=0,"",Sheet1!C2)
Sheet1 has the column heading "Date" that is linked to Master Worksheet column Heading "Date". Is there a possible way to re-write the formula where It can accept data from either sheets instead of only 1 sheet?
Going back to the fact that I have 2 date columns in 2 worksheets
Lets say for example;
I have Symbol AAA in Sheet1
I have Symbol ZZZ in Sheet2
I have Symbol GGG in both sheets......................
View 3 Replies
ADVERTISEMENT
Feb 25, 2012
I have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):
Date Amount Title
I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".
with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.
View 4 Replies
View Related
Sep 15, 2006
1) I have 2 worksheets that contain 2 matching name columns; " Date" and the primary column A "Symbol". The rest of the column headings in each of the worksheets are different. Data (from internet sources) is inserted into the worksheets in table format on daily basis
Sheet 1 name = Data 1
Sheet 2 name = Data 2
Master worksheet name = MERGED DATA
2) I use the Match and Index formula for both sheets
the following formula is inserted in row 2 of Data 1 and Data 2 sheets (other than Col A "Symbol")
for column B in sheet 1
=If(Or(ISERROR(MATCH(sheet1_DataLookup,$A5:$A65536,0)),sheet1_DataLookup=""),"",INDEX(B5:B65536,MATCH(sheet1_DataLookup,$A5:$A65536,0),1))................
View 2 Replies
View Related
Mar 7, 2013
I have an array of data with multiple codes stored in text...
I want to set a formula in a cell to look for all instances of specific text in an array. Then compare the value of all of the column headings, which are numbered across the top of the array, which contain a match in that column and return the highest value.
Example: 10x10 array, columns 1,3, and 5 contain "text" somewhere in those columns. Formula would return 5.
View 2 Replies
View Related
May 18, 2006
I've got 2 worksheets SH1 & SH2( Two different workbooks) Col A is NAME in each Sheet. Need to Match Col A Sheet 2 to Col A Sh1 if they are identical. If identical copy info from Col B, and Col E- G to Sheet 1 Col B and Col H-J. If a Name is in Sh2 but not in Sh1, Copy (using same Column positions: copy info from Col B, and Col E- G to Sheet 1 Col B and Col H-J ) to NEXT AVAILABLE ROW in Sh1 COL A, and highlight it in Some bright color ; Then open a MSG Box telling me how many new names were added.
View 8 Replies
View Related
May 21, 2008
I have some specific requirement and it would be great if I could do it through macro. Also attached a sample excel file for the requirement. I have raw data in a worksheet (WS1) that I receive daily from factory. There is another sheet in a different workbook (WS2) that has format specified on how to display this raw data. The order of raw data on WS1 remains same. The question is that how do I replace the format titles with raw data?
For example, in the attached excel sheet, sheet "data" has list of values. Sheet "format" says how to display data. Sheet "output" is output that I finally want to generate. The sheet "data" will always have data in the same order. I need to read values and replace the format title ( name, age etc) with corresponding values on "data" sheet.
View 5 Replies
View Related
Mar 30, 2014
I have a excel workbook, which sheet2 (vehicle arrangement) is master data sheet. which column headings are match with other worksheets. whenever I put the cell value of any multiple rows or column, the cell value (number) and rows (text) are copy or show in the particular sheet which name match with column head.
Sample:
Customer Name
ORDER
MMT
TIL
VBG
JKL
SSL
RDF
ERG
RFG
ERRT
WC
ARS
YUH
TOTAL
M/S XYZ
50
[Code] .......
Worksheets are names as column names is here.. "MMT","TIL", "VBG"........"YUH". So whenever I give the cell value under the column head the same value and corresponding row (customer name) should be show in the particular column head worksheet.
View 9 Replies
View Related
Aug 5, 2014
Having trouble consolidating 3 worksheets into one worksheet, on these 3 worksheets they all have the same headings which go from A-R. I simply need to be able to run a formula or use some sort of method to incorporate all 3 lists into 1 master list. The only way i currently can do this is to create a vba script which simply copies say 500 rows from the first worksheet paste onto master spreadsheet then copy 500 rows in second worksheet and find next blank row and paste etc.
Is that the best way to do this or is there a better way?
View 1 Replies
View Related
Jan 5, 2007
We want to transfer row data based on criteria in that row to another sheet. We only want to transfer certain cells in the row. We have a column that is named status that we want to trigger and identify the row for transfer and then its location in the new sheet. We tried vlookup but it would only take the first instance of a specific status in the column and not take subsequent instances. We then tried the index function but could not get it to work correctly. I hope this makes sense. There will be a high volume of data being inputted continuously so I don't think that copy and pasting is a viable solution....
View 9 Replies
View Related
Mar 22, 2007
I am having an issue with automatically transferring data from several worksheets into a single summary and analysis worksheet. I receive single worksheet Excel files with data from a hundred people and need to move it to a summary sheet to produce totals, averages, etc., without manually selecting the data and doing copy/paste a hundred times.
View 9 Replies
View Related
Feb 26, 2013
how to Transfer data between worksheets using multiple criteria?
View 1 Replies
View Related
Mar 25, 2007
I want to transfer the data of one worksheet (to be added everyday) to multiple sheets.
View 4 Replies
View Related
May 28, 2008
Is there a way I can return a column heading(s) if text is present in a row?
Refer the attachment... ozgrid.xls
Names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'???
View 5 Replies
View Related
May 13, 2013
Simple macro formula. I want to have my function to insert a column and copy over some data headings here is what I have...
Sub Macro17()
'
' Macro17 Macro
'
'
Selection.End(xlToLeft).Select
range("D5").Select
[Code] .........
The issue I am having is that is it inserts the column AA (end of the original data) and I want it to insert at the end of all the data. For example if I run the macro once it posts in column AA, I want the next result to post in AB but it posts in AA.
View 6 Replies
View Related
May 28, 2008
is there a way I can return a column heading(s) if text is present in a row?
refer the attachment...
names are listed down the left, headings along the top, with data in the corresponding cells. For each unique name i.e 'Steven' is there a way to list each heading data is found i.e 'Shop2, Shop4'?
View 4 Replies
View Related
Jan 23, 2014
I have a workbook with 2 worksheets, Sheet1 and Sheet2 have the same column headings in Row 1 but they are not in the same positions.
What I need to do is read the column header in Sheet2 Column A (Cell A1) and copy the data from A2 to last row and paste it in Sheet1 in the first empty cell under the same column heading, which may be the Column D position instead of Column A like in Sheet2.
It needs to loop through all the columns in Sheet2, copying the relevant data to under the correct header in Sheet1.
View 2 Replies
View Related
May 2, 2014
I have a table of data with column headings. I'd like to be able to filter the table based on the column headings, however I have a 'spare row' between the column headings and the data which I use to add new entries to the table using a macro (the macro copies the row and pastes it in one of the empty rows at the bottom of the table, then sorts the data which places it with the rest of the data).
The problem is, Excel won't let me apply a filter to the table if the column headings are separated from the data that I would like filtered.
View 8 Replies
View Related
Apr 8, 2009
i need a macro that will copy data based on the column headings, i have two worksheets, the first worksheet is the raw data and second worksheet will be the results sheet, the issue is the headings i have in raw data is different to the headings i have in the results sheet and the heading will not always be in same column in the results sheet, so for example in Raw data i have heading Quantity and in destination sheet i have heading Units, so the macro should copy the data for quantity in sheet raw data and paste to sheet "Results' under heading "Units". The header row on both sheets is row 3. I do have more headers but if I know how to do one then i can apply the same method for the others.
Sheer raw data
Quantity 820,655.00 177,015.00 6,652,041.00 1,517,267.00
Sheet results
Units 820,655.00 177,015.00 6,652,041.00 1,517,267.00
View 9 Replies
View Related
Jun 5, 2014
I am trying to compare deductions from two different pay periods. I have the Data from check 1 & check 2 on different worksheets, in no order, and would like the data to auto populate on a third worksheet into a side-by-side comparison of the data. The problem comes when there is a deduction missed or a new deduction that only shows up on one of the two checks. I am having to manually insert lines to make my side-by-side comparison match. Is there a macro or something that can pull the data from these two soures and display them in a side-by-side comparison even if there is no match?
View 1 Replies
View Related
Jul 25, 2007
I have a workbook with 3 sheets. AP, Move, Match. AP & Move will be about 40,000 lines.
I need a macro that will take the data from those two sheets and match them up on the match sheet by column A Line by line with all data moving over. An example is attached.
I'm not sure if this is possible, but please let me know if you need more info because I really don't want to do this manually. Anything that doesn't match I just need a blank line. I can add the true-false formula, but if it would fit in the macro that would be cool to.
View 7 Replies
View Related
Dec 12, 2013
I need a formula to automatically transfer data in a column into another column, omitting cells in the 1st column that do not have data in them.
So, for example, transfer the data in column "A" below to column "C" below omitting any blanks when the formula automatically copies data over:
Example Spreadsheet.xlsx
View 3 Replies
View Related
Feb 24, 2010
I have rankings from several different sources all with different rankings for different people with a different number of people in each set of rankings.
I would like to match the names from each ranking set and place the corresponding ranking into one worksheet. I have done this without the code but over the course of the next couple of months the rankings will be changing.
I have them importing from the web so when they update I would also like for my rankings to update. Attached is the rankings each in their own worksheet.
The final sheet is what the end product looks like.
View 4 Replies
View Related
Sep 14, 2006
I'm trying to compare 3 different worksheet in the same workbook and copying the unmatched values into a new worksheet. find the attached file. In the sample file, am comparing sheet1, sheet2 and sheet 3 with sheet1 as the base. the columns mite differ in their location but the column headers are same.. The difference, bolded cell, should be copied along with the header and the code, into a new file and has to be saved...
View 2 Replies
View Related
Mar 11, 2008
I have to write a macro that will copy the values of 'Items' in 'worksheet 2' to 'Items' in 'worksheet 1' ONLY when the 'Title' value is matching in both worksheets AND the value of ' Heading' in worksheet 2 is 'Entry1'.
Example:
Worksheet 1:
Title |Items
David
Bill
John
Worksheet 2:
Title |Items |Heading
David |A, B, C |Entry1
David |A, B |Entry2
Bill |A, B, C |Entry1
Bill |A, B, D |Entry2
John |G, H, J |Entry1
Gerry |G, H, R |Entry1
From the above data, I want the macro to compare 'Worksheet 1' with 'Worksheet 2' and only copy the 'Items' that have a matching 'Title' AND a 'Heading 1' value of 'Entry1'
So the final result should be:
Worksheet 1:
Title |Items
David |A, B, C
Bill |A, B, C
John |G, H, J
I have seen examples of compare used but not sure how to apply it to my case.
View 8 Replies
View Related
Dec 11, 2006
I have 2 sheets in an excel folder and in fact I would like to create a macro to tranfer a row of the chart present in Sheet 1 if a cell is matching a condition so that the macro identifies each row of the chart in the Sheet 1 and transfer the row in the other sheet if the value in the column A (Chart Sheet 1) is equal to 1 :
sheets("Global Sheet").Select
Range("A1").Select
If activecell = 1 Then Transfer A1:J1 in the other excel sheet ( anywhere)
View 12 Replies
View Related
Sep 2, 2007
I have a spreadsheet (XL2003) that calculates some price data based on a specific algorithm. The program then determines which price data meets a certain criteria and if met, will place the value in a column ( Column C in the example WS attached.) If criteria not met the cell is returned empty. Under certain settings, this column could have values in all rows (C9 to C27 in the example) but is usually just a specific consecutive list as in the example.
I have to transfer the calculated values to another spreadsheet so I want just these values to be initially transferred to a separate column (Col. H in the example WS.) from which they can easily be transferred later to the other spreadsheet. I need to figure a way for a macro to check in col. C (ie C9) and if there is a value in the cell, to transfer it to the next available cell in Col H (Starting with H9). The macro would then look at the next cell down in Col C (C10) and do the same routine until the last cell is reached. The transferred data would then end up in consecutive cells in Col. H. I have shown in the example attached how I would want the data to look after the macro is run. I figured this is some type of loop but could not see any examples in the forum that would do what I need.
View 2 Replies
View Related
Aug 4, 2014
I have some numbers arround 1 lac nos in column 'A'and I want to make a group 200 numbers and transfer it in to next next column .i.e 1-200 numbers in column 'B', 201-400 numbers in column 'C' etc.
View 5 Replies
View Related
Mar 6, 2014
I have a form to fill out and I would like a macro to input the data on the form (column) to another sheet in the next open row.
See attached. DATA_EXAMPLE.xlsm
View 4 Replies
View Related
Jul 3, 2013
I worked on a workbook which has multiple worksheets( mine has 6). The data doesn't start from A1. I want to copy the data from each worksheet into a sheet called summary. I want to create the macro that would only copy the heading row once.
WB test.xlsxWB test.xlsx
View 5 Replies
View Related
May 5, 2014
I've run into an issue working on a small project.
The project:
A workbook in which sheet 1 is a form for people to input into 2 adjacent columns time spent on different tasks at the end of each work week. Sheet 2 is identical to sheet 1, but has the intended purpose of storing the data input into the form in sheet 1.
There is a button at the bottom of the form in sheet 1 with an assigned macro that effectively transfers all the data to sheet 2 and then clears sheet 1 for another entry.
The issue:
I cannot get the data to transfer to the next available set of 2 adjacent columns in sheet 2. It keeps repopulating the first 2 columns.
modifying the macro to transfer data to the next available set of 2 columns on sheet 2
View 7 Replies
View Related
