Transfer & Update Data From Column With Conditions
Jul 25, 2007
I have a lot of data broken up into numeric decimal form in one column. I need all this data to be transferred to different worksheets based on the amount of decimals. Attached is some of the data I need sorted. The first sheet is my main sheet, then the next sheets need to be ascending in numeric order by sorting the data with two decimals under the column Tear number system.
For example I need the next tab to be the data with 0.21 with 2 decimal places, then the next tab would be the data under 0.28 with 2 decimal places, then the data under 0.29 with 2 decimal places. So the 0.21 worksheet would be 0.21 and have all the data for 0.21.1, 0.21.2 all the way through 0.21.6.
I also need this to be compatible with new inserts to the main table. Meaning if a new number is entered in, the number and data would automatically be entered and sorted to the tab that the number pertains to. I have tried a vlookup function but have not had much success. I have also tried recording a macro but am having problems with that as well.
I have a spreadsheet (XL2003) that calculates some price data based on a specific algorithm. The program then determines which price data meets a certain criteria and if met, will place the value in a column ( Column C in the example WS attached.) If criteria not met the cell is returned empty. Under certain settings, this column could have values in all rows (C9 to C27 in the example) but is usually just a specific consecutive list as in the example.
I have to transfer the calculated values to another spreadsheet so I want just these values to be initially transferred to a separate column (Col. H in the example WS.) from which they can easily be transferred later to the other spreadsheet. I need to figure a way for a macro to check in col. C (ie C9) and if there is a value in the cell, to transfer it to the next available cell in Col H (Starting with H9). The macro would then look at the next cell down in Col C (C10) and do the same routine until the last cell is reached. The transferred data would then end up in consecutive cells in Col. H. I have shown in the example attached how I would want the data to look after the macro is run. I figured this is some type of loop but could not see any examples in the forum that would do what I need.
I have some numbers arround 1 lac nos in column 'A'and I want to make a group 200 numbers and transfer it in to next next column .i.e 1-200 numbers in column 'B', 201-400 numbers in column 'C' etc.
I've run into an issue working on a small project.
The project:
A workbook in which sheet 1 is a form for people to input into 2 adjacent columns time spent on different tasks at the end of each work week. Sheet 2 is identical to sheet 1, but has the intended purpose of storing the data input into the form in sheet 1.
There is a button at the bottom of the form in sheet 1 with an assigned macro that effectively transfers all the data to sheet 2 and then clears sheet 1 for another entry.
The issue:
I cannot get the data to transfer to the next available set of 2 adjacent columns in sheet 2. It keeps repopulating the first 2 columns.
modifying the macro to transfer data to the next available set of 2 columns on sheet 2
I have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):
Date Amount Title
I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".
with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.
1) I have a Master worksheet that combines/appends data from 5 worksheets. The data in the 5 worksheets is cleared on a daily basis once data has been transferred (using a macro) to the Maser sheet.
2) I use the Match and Index formula for the 5 sheets. Column A "Symbol" being the primary value
Problem:
I have Matching column headings " Date" in 2 worksheets, I can only use date data from one of the sheets that contain the date column data. Here is the formula I use in the master to accept data from the worksheet
=If(Sheet1!C2=0,"",Sheet1!C2)
Sheet1 has the column heading "Date" that is linked to Master Worksheet column Heading "Date". Is there a possible way to re-write the formula where It can accept data from either sheets instead of only 1 sheet?
Going back to the fact that I have 2 date columns in 2 worksheets Lets say for example;
I have Symbol AAA in Sheet1 I have Symbol ZZZ in Sheet2 I have Symbol GGG in both sheets......................
I am wanting to count the number of records (excluding cells with no value) based on criteria in a corrosponding column. In column "AS" I have a number of records that are not sorted showing values "7", "13" and "2".
In column "AL" there are values attached to some of these records based on certain IF statement conditions. I am wanting to count and sum the number of records in column "AL" that meet the conditions of "7" in column "AS" and so forth.
If the result of the above formula is less than the value in cell BK2, then look if the number in B2 is available in sheet2 (another sheet) column B.
If the number in B2 is available in sheet2 coloumn B,then the result should be BK2. If the number in B2 is not available in sheet2 coloumn B,then the result should be above mentioned formula which is =IF(NETWORKDAYS(MAX(BI2,DATE(2014,6,1)),MIN(BJ2,DATE(2014,6,30)))<0,0,NETWORKDAYS(MAX(BI2,DATE(2014,6,1)),MIN(BJ2,DATE(2014,6,30))))
I have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem ... .Fields.Item(1).value = activecell 'activecell value = "Joseph" If Not isempty(activecell.offset(0,1)) Then .Fields.Item(2).value = activecell.offset(0,1).value Else .Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works End If ... End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty ' or .Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
I have a list of employees who's job status may change at the end of a given month. If the status changes, they have a supplemental payment that is tied to their job status and may change as well. But that depends upon certain conditions like their years of service and their union.
I'm trying to write a formula that will update that supplemental payment based upon certain conditions, but I can't quite seem to get it right. A challenge is the table I'm looking values up in has 8 columns and the value could be in any of the columns depending on years of service.
These are the conditions for the lookup: 1. If their union local is the same, they would keep the supplemental payment so long as it is not more than allowed for the title. If it is more, they get the supplemental that corresponds to the new title and the years of service.
2. If the new title is PAA and they have 10 or more years of service, the new supplmental is $600.00
3. If the new title is Clerical Associate II and they have a 6 or more years of service, they get a supplemental that corresponds to their years of service.
A colleague recorded this macro to insert a row into a column of data which a graph is plotted from to automatically update the graph each time more data is added. I can't figure out how to simplify the VBA and stop it adding a row on row 57 rather than the bottom of the graph.
I have a basic formula =C17+'Asset Depreciation 2008 Onwards'!C24, and I want to copy it down just using the drag function. Problem is that the second reference range of cells are in rows and hence when I copy it down it doesn’t automatically update the cell references because it want to update them by column number instead of row number. IE I want it to display =C17+'Asset Depreciation 2008 Onwards'! D24, instead of C25. Do you know if there is any way of telling Excel that I want it to increase the column number by 1 every time, instead of the row number for this part of the formula?
I am trying to get information from 1 sheet to another. What i need to do is take the information from sheet 2 column H2:H26 and put it in sheet 1 cell I4. i already have the vlookup information in the other cells that i need but for what i need this for is different than a vlookup. basically i want to be able to type in a name (from sheet 2) in cell I4 (sheet1) and all the information that i need auto populates for me like i already have. I was able to do this with a drop down menu but that wont work as the information will change weekly,
I use excel and would like to know how to copy a large volume of address data but at the same time filtering out irrelevant data placed under each other in a row, in this case, air compressors air conditioning web address etc ( see below for example). I need the first 5 lines only. The rows of unwanted data are irregular i.e some have 10 lines, others 5 , and others 2 or one line which makes using a formula difficult as there is no consistency. The data eventually need to be placed horizontally in columns to be compared to other address lists. To make matters worse, the text data has been merged and wrapped.
I have a workbook that has multiple functions. One of these function is that when the user select a key word from a drop down validation list, a VB code transfer all information from that row from Column A to column W to the next available row on another tab.
VB: If Not Intersect(Target, Range("X:X")) Is Nothing And Target.Cells.Count = 1 Then Application.EnableEvents = False
If LCase(Trim(Target.Value)) = "yes" Then
[Code] ....
Is there a possibility to transfer this information into another workbook. Instead of transferring the info to a tab name "Archives" to transfer in another workbook. This workbook will only have one tab called "Archives".
This will minimize the information within my Initial workbook in project.
The path in the new workbook where the information should be transfer should be in:
"C:Documents and Settings"username"My DocumentsMy Data Sources" to an excel workbook that will be named Archives.
I know that the "Archives" workbook need to open then close after the information has been inserted...
I am trying to sum up cells from a column based on conditions in another column (see attached file). I know this could be done using a formula but for various reasons I want to use code. I am not sure if what I am doing is the right approach.
I have a spread with five tabs. Each tab is a person's job responsibilties for numerous properties. Each person works with a property called Orange Avenue. I want to create a tab for JUST Orange Avenue items but want it to automatically pull any and all info from each tab where that person's Ornage Avenue duties are.
I'm trying to convert this code so it transfers the data without the input box being needed.
Dim response As Long Dim strLastRow As String Dim rngC As Range Dim strToFind As Variant, FirstAddress As String Dim wSht As Worksheet Dim rngtest As String Application.ScreenUpdating = False
Set wSht = Worksheets("Transfer Sheet") strToFind = Application.InputBox("Enter Your Initials") If strToFind = False Or strToFind = "" Then Exit Sub
With ActiveSheet.Range("H2:H5000") Set rngC = .Find(what:=strToFind, LookAt:=xlWhole) If Not rngC Is Nothing Then FirstAddress = rngC.Address
Do strLastRow = Worksheets("Transfer Sheet").Range("A" & Rows.Count).End(xlUp).Row + 1 rngC.EntireRow.Copy wSht.Cells(strLastRow, 1) Set rngC = .FindNext(rngC) Loop While Not rngC Is Nothing And rngC.Address <> FirstAddress
I have to workbooks and I want to populate one of them with data from the other. The receiving document has the fields Account and SubAccount which I need to match up with the account and subaccounts in the other workbook.
However, in the other workbook, the line looks like "1000 Wages 000001" (which is account, name, subaccount). I can't find out how to have my receiving document scanning the providing document and when it finds an account and subaccount (in the above string) that matches the account and subaccount in the receiving document, to bring over the data.
From the attached spreadsheet I need to transfer all the rows where the issue status in column T is either ongoing or open. Now I know how to transfer them over if row 1,2,3 etc was going into row 1,2,3 etc into the new spreadsheet but as not all rows from this sheet is going over I need to now how to transfer data so in the new spreadsheet it just follows down rather than have spaces in it. i.e. if on this sheet I need to transfer data from rows 1, 5, 10, 15 on the new one they go into row 1,2,3,etc
There’s one “master table”. Two columns in master table are titled “Name-1” and “Name-2”, and all columns in front of it carry “Properties” corresponding to these names.
In a “second” table, when we choose/type the Name-1 and Name-2, corresponding properties should automatically be picked up from the master table. Is that possible?
