I need a formula to automatically transfer data in a column into another column, omitting cells in the 1st column that do not have data in them.
So, for example, transfer the data in column "A" below to column "C" below omitting any blanks when the formula automatically copies data over:
Example Spreadsheet.xlsx
im trying to count all the cells with data in sheet 1 column g but it must omit any cells that have "vs" in it. all cells have scores in like 1-1 2-2 2-1 etc but a few have vs in them and i dont want them counted
View 5 Replies View RelatedI have a spreadsheet (XL2003) that calculates some price data based on a specific algorithm. The program then determines which price data meets a certain criteria and if met, will place the value in a column ( Column C in the example WS attached.) If criteria not met the cell is returned empty. Under certain settings, this column could have values in all rows (C9 to C27 in the example) but is usually just a specific consecutive list as in the example.
I have to transfer the calculated values to another spreadsheet so I want just these values to be initially transferred to a separate column (Col. H in the example WS.) from which they can easily be transferred later to the other spreadsheet. I need to figure a way for a macro to check in col. C (ie C9) and if there is a value in the cell, to transfer it to the next available cell in Col H (Starting with H9). The macro would then look at the next cell down in Col C (C10) and do the same routine until the last cell is reached. The transferred data would then end up in consecutive cells in Col. H. I have shown in the example attached how I would want the data to look after the macro is run. I figured this is some type of loop but could not see any examples in the forum that would do what I need.
I have a column that contains labels that are entered down to row 400. Below row 400 in the same column are formulas. If I do a filter on that column I get formula results in the filter list from the formula cells. Is there a way to omit the formula cells on the column that's being filtered? In other words, only list data in rows down to 400 in the filter list.
View 2 Replies View RelatedI have some numbers arround 1 lac nos in column 'A'and I want to make a group 200 numbers and transfer it in to next next column .i.e 1-200 numbers in column 'B', 201-400 numbers in column 'C' etc.
View 5 Replies View RelatedI have a form to fill out and I would like a macro to input the data on the form (column) to another sheet in the next open row.
See attached. DATA_EXAMPLE.xlsm
I've run into an issue working on a small project.
The project:
A workbook in which sheet 1 is a form for people to input into 2 adjacent columns time spent on different tasks at the end of each work week. Sheet 2 is identical to sheet 1, but has the intended purpose of storing the data input into the form in sheet 1.
There is a button at the bottom of the form in sheet 1 with an assigned macro that effectively transfers all the data to sheet 2 and then clears sheet 1 for another entry.
The issue:
I cannot get the data to transfer to the next available set of 2 adjacent columns in sheet 2. It keeps repopulating the first 2 columns.
modifying the macro to transfer data to the next available set of 2 columns on sheet 2
I have a lot of data broken up into numeric decimal form in one column. I need all this data to be transferred to different worksheets based on the amount of decimals. Attached is some of the data I need sorted. The first sheet is my main sheet, then the next sheets need to be ascending in numeric order by sorting the data with two decimals under the column Tear number system.
For example I need the next tab to be the data with 0.21 with 2 decimal places, then the next tab would be the data under 0.28 with 2 decimal places, then the data under 0.29 with 2 decimal places. So the 0.21 worksheet would be 0.21 and have all the data for 0.21.1, 0.21.2 all the way through 0.21.6.
I also need this to be compatible with new inserts to the main table. Meaning if a new number is entered in, the number and data would automatically be entered and sorted to the tab that the number pertains to. I have tried a vlookup function but have not had much success. I have also tried recording a macro but am having problems with that as well.
On 18 worksheets I intend to use variations of the formula below to read ColsD:G and ColsK:N to ascertain whether the values are less then or equal (
View 9 Replies View RelatedI have a few row headings on a fresh worksheet (called "New" like so for A1, B1 and C1 for example):
Date Amount Title
I then have raw data on another worksheet. This data has many column headings (more than on the "New" sheet) and the data for that heading in the column underneath heading. So the Date column will have say 50 rows of dates in the column. What I want to do in VBA is match the headings from the "New" worksheet to the raw data worksheet ("Data") and then copy and paste the data into the column under the row heading in "New" from "Data".
with the code for this? I have tried using MATCH and I can't get it to work. I'm also looking for an efficient way to do this I'm sure I am doing it a very inefficient way.
1) I have a Master worksheet that combines/appends data from 5 worksheets. The data in the 5 worksheets is cleared on a daily basis once data has been transferred (using a macro) to the Maser sheet.
2) I use the Match and Index formula for the 5 sheets. Column A "Symbol" being the primary value
Problem:
I have Matching column headings " Date" in 2 worksheets, I can only use date data from one of the sheets that contain the date column data. Here is the formula I use in the master to accept data from the worksheet
=If(Sheet1!C2=0,"",Sheet1!C2)
Sheet1 has the column heading "Date" that is linked to Master Worksheet column Heading "Date". Is there a possible way to re-write the formula where It can accept data from either sheets instead of only 1 sheet?
Going back to the fact that I have 2 date columns in 2 worksheets
Lets say for example;
I have Symbol AAA in Sheet1
I have Symbol ZZZ in Sheet2
I have Symbol GGG in both sheets......................
Is there a way to filter column A but ensure it includes multiple lines of data in a different column.
I have attached an example of what I am looking for:
I need to filter by community but keep all the information listed in columns, B, C, & D.
So when I filter to Thunder Bay I would still see the 5 members listed in column D.
I realize the easy solution is to fill all the empty cells in column A to pick up the data in the other columns, but I do not want to Fill all the empty cells to include the name "Thunder Bay" (not the look I want for this spreadsheet).
I am trying to Count (or counta?) cells in one column if they have data but only if within a date range in another column.
So, in the example below, I would want to count how many cells in column E have data in them, but only if the date in column A falls between Jan 1 2014 and Jan 5 2014. (In this case, result should be 4).
A
B
C
D
E
01/01/2014
[Code].....
I need a formula to return column header if there is data in the column, any data.But I also need to return the second, third, fourth header with data too
In column A row 2, I have =IF(M8"",$M$1,IF(N8"",$N$1,IF(O8"",$O$1,IF(P8"",$P$1,IF(Q8"",$Q$1,IF(R8"",$R$1,IF(S8"",$S$1,IF(T8"",$T$1,""))))))))
This returns the row 1 header for the first instance of data in row 2 columns M thru T But in B2, I need the second header with data in the column.
I need the results in yellow (1st, 2nd, 3rd, 4th) from the array to it's left
1St match2nd 3rd 4thColumn MColumn NColumn OColumn PColumn QColumn R
Column MColumn PColumn QData data2Data3
Column NColumn OColumn PColumn R Data Data2 data3 data4
Would use match/index but can't increment it to the second or 3rd match
I have a statement from an account (which happens to be the government) in which they list every invoice they are paying and each item on that invoice. But they don't have an invoice total. I'd like a way to add up the item totals for each invoice and put the total in column D. Each invoice could have 1 to 10 different items on it.
A(invoice#) B(Item) C(total) D(invoice total)
111 widget 1 $5
111 widget 2 $10
111 widget 3 $8 XXXXX
222 widget 1 $5
222 widget 5 $15 XXXXX
333 widget 2 $10 XXXXX
444 widget 5 $15 XXXXX
I had thought an IF formula would be the way to go.
Table 1
January-12
February-12
March-12
Table 2
Sr. No
Name
Dep
Lates
CL / SL
AL
Lates
CL / SL
AL
Lates
CL / SL
AL
[Code].....
Id like to apply a formula, any formula to an entire column if it contains data, and incorporate the original data in the calculation and then replace the original data with the result. I don't want to have to create new columns.
I'm using this to fix up database results; a common problem is dates in dot format e.g. 14.11.2008
All I have so far is an autofill formula that overwrites everything. Can someone help me with the rest? I'm using the SUBSTITUTE function to replace the dots '.' with slashes '/'
Sub Create_formula_result()
Dim Limit As Long
Dim r As range
Set r = range("A1")
r.FormulaR1C1 = _
"=IF(RC[0]"""",(SUBSTITUTE(RC[0],""."",""/"")+0) ,"""")"
Limit = ActiveSheet.UsedRange.Rows.Count
r.AutoFill Destination:=range(r, Cells(Limit, r.Column))
End Sub
I am looking to average a range of cells which won't always be the same size. How do I create a formula array that will omit empty cells in my formula.
View 9 Replies View RelatedI have a excelsheet that looks like this:
Column A | Column B | Column C
Los Angeles | Fire Dept | 3
Los Angeles | Health Services | 12
New York | Fire Dept | 8
New York | Health Services | 22
New York | Internal Services | 100
New York | Public Works | 7
Chicago | Health Services | 15
Chicago | Public Works | 56
Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept
Health Services
Internal Services
Public Works
Social Services
Los Angeles
3
12
New York
8
22
100
7
Chicago
15
56
4
I am trying to write a formula that shows the best grade for each each student and the subject in which
that grade was achieved.
In a previous post i was shown how to identify the highest grade
MAX(IF(A$3:A$34=A7,C$3:C$34))
I hit CTRL, SHIFT & ENTER to activate the formula - Result in column E
However, I also want to identify the subject in which they scored their highest grade in column F
I have two problems
1. I don't know how to write a formula that brings in the subject based on the grade for each student
2. I don't know how to write a formula in case there is a tie (see DAVID L)
What I'd like to do is; If column C contains data then insert a blank column and shift column C to the right.
View 4 Replies View RelatedI have two columns of data and what I would like to do is have excel look over one column ( I5-I379) and for each cell that has say 30 in it I want it to return the value from a corresponding column (G5-G379), to form a separate column.......is this possible?
View 9 Replies View RelatedI have a new spreadsheet that I made to give us the break down of each invoice we create. what we want is to see each job that is done (by code), the amount we charge per each, the cost of goods per each, and the profit margin. In this spreadsheet I have two tabs. in tab one it has the form I made that has a place to input the data that will change with each invoice as well as a section that is broken down into columns. In these columns I have it listed this way. CA=Job code, CB=Job Description, CC=how many, CD=Charge ea., CE=rate total, CF=COGS ea., CG= COGS total, CH=profit
I have the formula done for all of the math the get the totals. My idea was to make a second tab. In tab 2 I have everything listed in columns that will go into tab one. It is broken down like this. CA=Job Code list, CB=Job Description list, CC= charge ea. CD= COGS ea.
What I want to be able to do is when I type in the job code in the first cell under the column A on tab one, it will bring over all of the info from tab 2 and put it in the right spot for that code. So if I typed in say TT001 in that cell it would bring over the description matching that code and put it in the cell under B, along with the charge in column D, and the COGS under column F. And I want it to be that way for each code I type in and it will be different each time I fill this out. How do I explain this part? Ok so I a new invoice made its # 22. I take this spread sheet and do what I want and get all the totals so I print it out. I then want to be able to clear all the info and or just type in a new set of codes that will be on invoice # 23 and then #24 etc.
So what I am saying is the codes will be different each time I fill it out. that's why I have them listed on a different tab and will just put them in tab one long enough to get the total and print it out. Is that clear as mud? I will stop here and wait and see what questions I get back.
I have 2 different sheets one is my check book register and the other is a summary page. Both have different categories for example [sheet 1 "register" (gasoline = A) (food = F)] [sheet 2 "summary" (Auto = A)
I think this is how I want it but I need this to work no matter what category my debit or credit falls in. If date is "January" and category is "A" then copy "debit" to sheet 2 under January Auto. then sub total all as designated on second sheet.
If date is January and category is "m" then copy debit to sheet 2 under January mortgage, then subtotal as designated on second sheet. I have attached an example of my spreed-sheet so far as you can see I am struggling getting the amounts to go into the correct categories. Also sometimes there may be more than one of the same type of transaction in the same month they need to be able to go into the same cell and be totaled as well.
I have set of data Pasted in 4th row, in the top row 44 columns values assigned i want move data from set of data to different column among these 44 columns
Like "Service Order ID" is 1 column in set of data ,it move to second column of top row
Some of column need to delete. (Service Order Type,Service Order Description,Created By,Status,Contact,Expected Delivery Date,
Creation Date,Priority,Net Value,Currency,External Reference,Reference Date)
I want Get output result in same sheet (Actual).
I created UserForm for people to enter there details into this form. I designed it ok, but i need it to, once it is filled in to copy what is entered onto a page in the spreadsheet.
So someone enters there details into a form that appears but then i need their details to appear on the spreadsheet at the click of a button.
I am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
I would like to transfer data from one sheet to another with the following caiteria.
Sheet 1
Id Item
1 a
1 b
2 c
3 d
1 e
2 f
Out put sheet want:
1 a b e
2 c f
3 d
What is the way to do this. What formula I can use here.
I need a temporary database. What I need to do is to transfer data from each tab to a Masterfile tab. For example. I have Jan 1, Jan 2, Jan 3 tabs I need this to automatic transfer to Masterfile tab. I know I can copy/paste this BUT I have a LOT of data's like way back to June 2013 to present so I really need a way to do this easier.
View 6 Replies View RelatedI have lots of data.What is the best way (formula) to add I10+M10+Q10+.....DY10, (Every 4th column)
View 9 Replies View Related