exclude the duplicate row in the macro. The macro is checking for blank or "NA" in column N and copying the row to a new destination file. It is not repeating the row if either one of the conditions is met. [that is wat I want to do] however if the rows have duplicate data i dont want to copy them.
Sub SRSCheck_Data()
Dim Rg_Src As Range
Dim LastRow As Long
[Code].....
I have a table of data like this:
A , 1 , 1
B , 2 , 1
C , 3 , 4
D , 1 , 3
E , 3 , 3
I need to eliminate duplicate entries WITHIN a row. So, I need the table to become:
A , 1
B , 2 , 1
C , 3 , 4
D , 1 , 3
E , 3
Is there an easy way to do this for a large sample? Also, there are actually more like 8 columns of this data, if thats important.
I have a spreadsheet that has account numbers listed multiple times. I need to eliminate all of the duplicate entries...Is there a formula for this...?
View 9 Replies View RelatedI have a spreadsheet with 2 columns of about 2900 records. about half of the records are duplicates. How can I eliminate the duplicate records?
Example
ID / ID#
2 3456789
2 3456789
3 5678987
3 5678987
4 1122334
4 1122334
I got a formula from this forum to eliminate duplicate records in a array from 1 column in database. Now I would like to take it one step further and filter out records in the array that do not meet the criteria of being in a particular "Zone" selected by the user by clicking on a ComboBox from cell "AA18".
The first formula is copied to cell "C7":
Excel Version : 2010
Attached File name : <Eliminating duplicates.xlsx>
I want to eliminate the duplicates and plot without duplicate in the yellow cells.
I have the code below that clears colums B-J and L-N in whatever row you activate a cell in. When a row gets cleared, how do I shift all the other rows up to eliminate blank rows in between the data real-time? I've deactivated the cut function already since this messes up references in the worksheet, so it would have to only use copy, paste, and clearcontents functions. Also, I don't want to DELETE any rows, just essentially shift the blank rows to the bottom. So when a row is cleared, all others shift up and the blank one goes to the end of the data that is available for data entry, so rows 17 to 116 are always available. But it must check to make sure that B-J and L-N are ALL blank, otherwise some wanted rows with one piece of information might get cleared. So at any given time, my range will always go from row 17 to 116. This is Excel 2007. Here is the code I have to clear rows that can be built upon.
View 14 Replies View RelatedIs it possible to eliminate gridlines from only certain rows, columns and or cells? Specifically, I would like to eliminate the gridlines from the frozen columns and rows.
View 5 Replies View RelatedI'm trying to write a macro that will loop to the end of each row, if the last cell is a number it will cut and paste that whole row into another sheet, if the last cell is a word then it will leave it as it is.
View 3 Replies View RelatedI have a long list of days and the flight hours of a helicopter in each day. The first two columns are the Date and Flight Hours, at the end of each month there is a space and a cell that says "Total" and may contain other words.
I want to delete every row in which the Flight Hours column contains a 0, a word, or anything that is not a number. This way only the days in which the helicopter has been active will show.
So far I have written a code that deletes every row where there is a 0 in the Flight Hours column, but i would like to delete everything that is not a number, such as a string value, a blank cell, etc...
On some occasions the part number has several to collect but the output from the system we use will output this as a sinle line and a quantity of 2 for instance. I would like a macro to indentify all of the parts with a quantity more than 1 and insert a duplicate line with that quantity.
On the attachement sheet 1 is an example of how the data may look, sheet 2 is how I would like it to be after the macro has been run (but within the same sheet)
I have a VBA Macro that loops through about 100,000 rows in an Excel file and removes rows that have a duplicate cell value. The macro takes about an hour and a half to run. Are there any ways to make the Macro run faster? Any ways in general to make VBA macros run faster?
View 9 Replies View RelatedI am using Excel 2007 on Windows 7 Home Premium 64bit.
My Workbook contains 2 Worksheets, both with the same headings in row 1. Sheet2 is initially empty, except for the headings in row 1.
The following is a sample of the data in Sheet1:
[Code] ......
I want to create a Macro to operate as follows:
In the above sample data, rows 2, 4, and 8 are identical, so I want to copy rows 4 and 8 to Sheet2, and delete them from Sheet1.
Similarly:
Rows 3 and 9 are identical, so row 9 should move to Sheet2;
Rows 5 and 11 are identical, so row 11 should move to Sheet2.
Rows 6, 7, 10, and 12 are all unique, so should be unaffected by the Macro.
New records will be added to Sheet1 periodically, so the Macro will be used each time to move any newly discovered duplicates to Sheet2.
The Macro should make no assumption about how the rows are ordered, and should not change their order.
I have uploaded two Workbooks, such that Workbook1 shows the original data, and Workbook2 shows the result I want to obtain.
Attached Files :
Workbook1.xlsm
Workbook2.xlsm
I have a spreadsheet that lists employees and their certifications. If an employee has multiple, then they will show up on as many rows as they have certifications.
The macro I have merges them into one row with a line break, but only the first column's unique value has been merged while the other columns containing their own unique values are duplicated when I want them to show up only once. Example: Jane Doe shows up 2 times on the report. Her name should only show up once on the row, not 2 times with a line break.
Here is the code. I have also attached an example of what I need. Because the attachment is a simpler version of the actual report, is it possible to specify which rows have the unique values and which ones don't?
I just finished a great macro and right at the end of deleting a sheet, I got a message box saying
"Data may exist in the sheet(s) selected for deletion. To permanently delete the data, press Delete"
How can I eliminate this from popping up in the middle of code?
I have a spreadsheet with 3300 rows. In column A there is a list of company names and in column H there is a corresponding Sales Rep name.Column A has many duplicate company names. I would like to run a macro that will find the a company name and then delete all the rest of the rows that contain that same company name.
Attached is a sample of that spreadsheet.
I feel as though I have spent enough time searching the previous posts to ask this question.
I have a 4 column sheet, column B has many cells with identical data. I want to delete all the rows that that have duplicate data in column B.
COLUMN A= Car Makers
COLUMN B= Models of cars
COLUMN C= color
COLUMN D= owner
I want to end up with rows that each contain unique info in COLUMN B.
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100
101
102
105
Col D
6
6
5
5
I have some code but I still need to do a considerable amount of tweaking to it. Currently my code is only deleting the duplicate values in Col A. I am having difficulty summing the values in Col D as well as deleting the entire row.
Here is my code thus far....
-------
Public Sub FindDuplicates()
For RwCnt = 1 To (Worksheets(1).Cells(65536, 1).End(xlUp).Row)
SrchValue = Worksheets(1).Cells(RwCnt, 1).Value
If Len(Trim(SrchValue)) > 0 Then
With Worksheets(1).Range("a1:a" & Cells(65536, 1).End(xlUp).Row)
[Code]....
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100.........................
I have data on 400 rows. Each row has a maximum of 10 cells with data, but many have empty cells with no data. I would like to sort each row to show values of cells in sequence and eliminate empty cells. I can use the sort row function but its a long process for 400 individual rows. Is there an easier way?
View 1 Replies View RelatedI am new to macro and just trying to learn. I have a spreadsheet with 20000 rows and 8 columns. I am trying to identify equal rows based on the values of columns C, D, E and F. then I need to separate equal bunches with a blank row. Then I need to copy the ID number from the first cell of column B of each bunch and paste it for the rest of the rows in that bunch. I have written the following code but this does not put the ID of the first cell in a bunch for the rest of the rows in that bunch.
[Code] .........
I have a spread sheet with values in the area of A1:H834
In column H, I have number values from 1-7.
Essentially that number value means that the values in the row are duplicate.
So, for example, if H2 has a value of 4, that means that $A$2:$G$2, really should have an additional 3 rows underneath with the EXACT same data in each cell, however, the way the sheet was created, was to remove the duplicate values and just indicate in column H, the number value of how many duplicates $A$2:$G$2 really is.
I need to unpackage this and create what it was originally. What type of formula can I use, to look at the value in H2, and then insert underneath that number of rowes with the exact same data as A2:G2 and do the same for the remainder of the table all the way down to A834:G834
The below code compares the Data in a Field that must be set and collect the duplicate Values in a second Worksheet.
The thing I want it to copy the rows, when a duplicate is found in Col A. editing the code below:
Original Sheet:
"A" "B" "C" "D"
Teil1A11000
Teil1B21001
[Code]....
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another.
My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows.
So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
[Code]....
My problem is I don't think I have approached this the right way but am unsure of where to go with it. The code as is does sort of work but I still get some duplicate and zero lines in my results.
I am working with timesheet data (name, project code, task code, date, hours etc...) in one spreadsheet and rate card data (name, role, day rate etc...) in another. My task is to pull together some of the information in each of these two source spreadsheets and compile a report. This I have done no problem. However, where a person works on a particular project and task on the same day and records multiple entries (which could be negative) I need to consolidate the hours in all these matching rows and have just one row reflect the total hours worked and delete the other duplicate rows. So an example would be:
Project | Task | Name | Role | Date | Hours
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | -2.5
123456 | 1.001 | Paul Jones | Project Manager | 20/02/2008 | 3.5
123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | 7.5
123456 | 1.001 | Jo Brown | Developer | 20/02/2008 | -7.5
123456 | 1.001 | Sam Smith | Architect | 20/02/2008 | 7.5
Should be processed and come out like this:.......................
Everyone always want to get rid of duplicate rows.
Is it possible to create duplicate rows of all the existing rows?
I will be both apologetic and happy, though, if you can suggest a solution that does not require programming. If a programming solution IS required, I'd be grateful if you could give me a note or two on how to run the code if it is necessary. I'm competent with computers and I could program what I need in C++ if I had to, but I haven't used VBA before.
Here's my excel problem:
I have two long sets of data:
One is pressure from a transducer under water (in the river) recorded every 30 minutes. The other is pressure from a transducer above the water recording every hour.
I need to find the pressure due to water for each point (meaning I need to subtract the atmospheric pressure from each point of total pressure). From that, the height of water can be calculated, which will allow me to calculate discharge, or flow, of water at this spot in the river.
Because the atmospheric pressure is only recorded hourly, I need to duplicate each row of the atmospheric data worksheet so I can copy it over and make it the 'subtract' column.
Since I am working with years of data, there are thousands of rows, and the idea of duplicating each row manually is lame.
I tried to figure out a way for my calculation formula to use each row of the 'subtract' column twice (by making the first two subtract the value in E5, the second two use E6, the third pair use E7, and then dragging the auto-fill formula thingy down through the whole data set, but it doesn't work because the first one that gets auto-filled subtracts the value right next to it {..., D9-E7, D10-E7, D11-E11, D12-E11, ...} and so on).
So, like I said, I think i'll probably need to program it. If there was a way get the auto-formula-fill thingy to stop skipping back to the cell directly next to it as soon as it starts over the loop of copying, then that would be great.
Thank you for your help, and I apologize if this has been posted before, but all I could find were like a billion threads on deleting duplicate data.
Is there way, short of creating a macro, to have duplicate rows deleted in a spreadsheet?
View 3 Replies View RelatedI want to delete rows that are a subset of any other row. Not manually, as there are thousands of rows. For example, in the attached file, row 4 is a subset of row 5 (also row 12 of row 13, row 14 of row 15, and both rows 21 and 22 of row 23).
View 2 Replies View RelatedI'm treating a set of data in excel in wich I have three long columns of values. I need to find all sets of three equal values in these columns (for instance, I need to find all lines with 1,1,1 or 2,2,2 and so on). How can I make a programe to do this?
View 12 Replies View Related