Eliminate Rows Where Cell Contains Something That Is Not A Number

Jan 25, 2013

I have a long list of days and the flight hours of a helicopter in each day. The first two columns are the Date and Flight Hours, at the end of each month there is a space and a cell that says "Total" and may contain other words.

I want to delete every row in which the Flight Hours column contains a 0, a word, or anything that is not a number. This way only the days in which the helicopter has been active will show.

So far I have written a code that deletes every row where there is a 0 in the Flight Hours column, but i would like to delete everything that is not a number, such as a string value, a blank cell, etc...

View 4 Replies

Eliminate Blank Rows By Shifting Rows Up

Nov 4, 2008

I have the code below that clears colums B-J and L-N in whatever row you activate a cell in. When a row gets cleared, how do I shift all the other rows up to eliminate blank rows in between the data real-time? I've deactivated the cut function already since this messes up references in the worksheet, so it would have to only use copy, paste, and clearcontents functions. Also, I don't want to DELETE any rows, just essentially shift the blank rows to the bottom. So when a row is cleared, all others shift up and the blank one goes to the end of the data that is available for data entry, so rows 17 to 116 are always available. But it must check to make sure that B-J and L-N are ALL blank, otherwise some wanted rows with one piece of information might get cleared. So at any given time, my range will always go from row 17 to 116. This is Excel 2007. Here is the code I have to clear rows that can be built upon.

View 14 Replies View Related

Eliminate Gridlines From Only Certain Rows

Jan 28, 2010

Is it possible to eliminate gridlines from only certain rows, columns and or cells? Specifically, I would like to eliminate the gridlines from the frozen columns and rows.

View 5 Replies View Related

Eliminate Rows (loop To The End Of Each Row)

Jul 13, 2009

I'm trying to write a macro that will loop to the end of each row, if the last cell is a number it will cut and paste that whole row into another sheet, if the last cell is a word then it will leave it as it is.

View 3 Replies View Related

Eliminate Duplicate Rows In The Macro?

Mar 29, 2012

exclude the duplicate row in the macro. The macro is checking for blank or "NA" in column N and copying the row to a new destination file. It is not repeating the row if either one of the conditions is met. [that is wat I want to do] however if the rows have duplicate data i dont want to copy them.

Sub SRSCheck_Data()
Dim Rg_Src As Range
Dim LastRow As Long

[Code].....

View 1 Replies View Related

Sorting Within One Cell + Eliminate Repeats

Jul 12, 2007

Cell 1 has 1,2,3,4,5
Cell 2 has 2,4,5,7,9

While combing them into one cell, there will be no repeat of the same number. So the outcome would be

1,2,3,4,5,7,9

The main point here is to merge the two cells together and eliminate the repeated numbers and sorting the numbers in a cell. Or if anyone knows series of steps not just one function to get to this.

View 9 Replies View Related

Eliminate Duplicates And Alphabetize The Rest Within A Cell

Aug 31, 2009

****** http-equiv="Content-Type" content="text/html; charset=utf-8">****** name="ProgId" content="Word.Document">****** name="Generator" content="Microsoft Word 11">****** name="Originator" content="Microsoft Word 11"> Hello good people.

I tried to search back through old threads and could not find the answer, so this is what I am trying to do.

I would like to eliminate the duplicate items within a particular cell and alphabetize the remaining items.

For example,
Currently:
South Atlantic, East South Central, South Atlantic, Pacific, Mountain, New England, East South Central,

Wanted result:
East South Central, Mountain, New England, Pacific, South Atlantic,

I�d do it manually, but at current rate, it looks like it will take me about 86 hours

View 9 Replies View Related

Sort Rows To Show Values Of Cells In Sequence And Eliminate Empty Cells

Nov 11, 2013

I have data on 400 rows. Each row has a maximum of 10 cells with data, but many have empty cells with no data. I would like to sort each row to show values of cells in sequence and eliminate empty cells. I can use the sort row function but its a long process for 400 individual rows. Is there an easier way?

View 1 Replies View Related

Delete All Rows Where Cell Value Is Number

Jul 6, 2014

I have the code below which is doing all I need it to do, except I would like to add a line that deletes all rows where the cell value in column "F" is a number:

The main thing is I can delete all rows if the value in column "F" is a number.

Idea Being, it:
-Deletes all rows where value in column F is blank.
-Then Deletes all rows where value in column "F" is numeric.
-Then deleted all rows where value in column "F" is any value specified in Column A is sheet 2.

[Code] .....

View 3 Replies View Related

Insert Number Of Rows Specified In Cell

Feb 7, 2008

I found lots of threads for inserting rows but not the one I need. I'm trying to insert rows with a macro on the position as specified in a cell f.e. in cell D4 I type the number 80 then the macro has to insert three rows at row 80

View 2 Replies View Related

Code To Check Number Of Rows Between Last Data Cell In G And F

Mar 12, 2014

The following code displays the message box and loads a userform if the Active cell offset 1, -1 when within G column equals "LAST ROW".

[Code] .....

How can I change it so instead it performs those same actions (displaying the message box, and loads the userform) if the number of rows between the last data entry in G and the last data entry in F is equal to 0?

View 3 Replies View Related

Insert Number Of Rows Based On Cell Values?

Feb 20, 2009

Column B contains geographical Areas. Column C contains a list of business departments.

North Env
North Env
North Ops
North Sales
North Sales
North Sales
South Env
South Maint
South Ops
South Sales
South Sales
South Sales

Etc.

The values and number of these departments will vary. I want to insert lines to sum the totals at the bottom of each geographic area based on the number of different departments. So, for this example, for the North three lines would be inserted. For the South, 4 lines would be inserted.

View 4 Replies View Related

To Find A Total Number Of Rows To A Blank Cell

Mar 14, 2007

I need to find the total number of rows down to the next blank cell (and then perform a function based on that number).

I'm using:

CountA(A1,xlDown)
Situation: I have a raw data import - each record is anywhere from 2 to 9 rows, and I need to move each row in that group into a column.

I would like to use something like:

totalRows = Application.WorksheetFunctions.CountA(Range("A1, xlDown"))
If totalRows = 4 Then
ActiveCell.Offset(1, 0).Range("A1").Select
Selection.Cut
ActiveCell.Offset(-1, 1).Range("A1").Select
ActiveSheet.Paste
etc.

View 9 Replies View Related

Calculate X Number Of Rows In Range Based On Cell Value

Oct 2, 2006

I can't seem to make SumIF or Vlookup do what I want here.

I have a table like that below. I also have a cell on the same sheet called CurrentPeriod in which a user can enter a period number corresponding with one of the values in the first column.

If someone enters 3 in "CurrentPeriod" I want to sum the first three values in the "Actual" column and then divide the result by the sum of the first three values in the "Target" column (effectively giving a percentage of target at the end of period 3)

Period Target Actual %Target
1 74 68 91.9%
2 81 71 87.7%
3 76 87 114.5%
4 76 68 89.5%
5 71 89 125.4%
6 69 81 117.4%

View 3 Replies View Related

Count Number Of Rows In Specific Column Up To Empty Cell

Feb 13, 2013

I want to count the number of rows in a specific column up to an empty cell and assign this value to a cell. I don't want to count the total number of rows but instead I want the number of the first group of rows.

For example, column A may have cells ranging from row 2 to 10 and then from row 12 to 20, so I only want to count the first group.

The below code counts the total which is not what i need.

Code:
Sub test()
Dim Mycount As Single
Mycount = Application.Count(Range("A:A"))
Cells(1, 4) = Mycount
End Sub

View 2 Replies View Related

Number Rows In Numeric Order IF Adjacent Cell Not Empty

Sep 22, 2007

I am looking for a formula to number rows in A1:A500
I would like to skip a row when B1:B500 cells are empty
then skip that row and start renumbering from 1
This is what I tried so far
=If(b9>"", countif($B$9:$B9,">"""),"")

View 8 Replies View Related

Fill Conditional Cell Values Based On Unknown Number Of Rows

Dec 15, 2009

I have a set of data in column R, with an unknown number of rows that looks like this

Days Late
-28
150
3
16
41
.
.
.

and I have written a script to add an adjacent column "S". I want to fill column S with conditional values based on the value of column R, sorted into categories such as "On Time", "Less than One Month Late", etc. Here is what I have so far, it doesn't work:

View 4 Replies View Related

Cannot Eliminate Value Error

Nov 12, 2008

Hello, I am trying to update a person's finances for this past year. She sent me a workbook that has two sheets with macros. The first sheet is linked to the 2nd. When a name and number is typed into the first sheet it automatically shows up on the 2nd.

My problem is, no matter what number I change on the first sheet under amount, the Total cell on the 2nd sheet gives me the #Value error. I have not changed anything, have not deleted any formulas but no matter what I do, that value error always shows up. I know very little about excel but I thought I knew enough to be able to update this book for her. Is there a special way I should be inputting the numbers on the first sheet so that the value error will show the running total instead of an error?

View 8 Replies View Related

Eliminate Loops

Oct 9, 2009

One of the multitude of areas where I still need drastic improvement is with efficiency. Specifically, avoiding loops.

Are any of you aware of any good, basic level sites, blogs, posts, etc., about better methods or processes? I'm not particularly experienced with programming (I've been a software TESTER for 13 years and just started some programming in recent months), so the more basic the better.

View 2 Replies View Related

Eliminate , And N/A From The Worksheet

Nov 10, 2008

I d like to use a macro where I will put in my personal.xls in order to check and delete , and N/As from any given worksheet

View 9 Replies View Related

Eliminate (0) Zero In Column

Oct 12, 2006

after i use some formula, when it is not found, it will display 0 or #NA or #REF!.

How i can hide it from printing?

View 6 Replies View Related

Eliminate Blank Cells

Jun 18, 2009

I have a spreadsheet with data in all different rows.
I'm trying to delete all the blank cells in between.
I tried go to special, blank, and delete cells,
but for some reason, the excel doesn't select all the blank cells.
It only selects a few blank cells, which is really strange.

View 14 Replies View Related

Eliminate Duplicate Entries WITHIN A Row

Feb 8, 2010

I have a table of data like this:

A , 1 , 1
B , 2 , 1
C , 3 , 4
D , 1 , 3
E , 3 , 3

I need to eliminate duplicate entries WITHIN a row. So, I need the table to become:

A , 1
B , 2 , 1
C , 3 , 4
D , 1 , 3
E , 3

Is there an easy way to do this for a large sample? Also, there are actually more like 8 columns of this data, if thats important.

View 9 Replies View Related

Eliminate Select & Activate

Jun 3, 2009

What is the quickest way to eliminate .Select, .Selection and .Activate from code to increase efficiency?

How do I refer to the range and workbook without selecting them first?

View 14 Replies View Related

Cond Formatting Eliminate N/A

Feb 11, 2008

Is there a way to eliminate N/As using conditional formattting...i am thinking of changing the cells color to white if it's value is N/A...

View 9 Replies View Related

Sum If Frequency But Eliminate Header Row

Dec 27, 2008

I am using the formula below to count the unique items in column M. Two questions, how can I use the whole range M:M, but then also ignore the header because that would return 3. I tried repacing M2:M6 with M:M but I get #NUM!. I'm using 2003 but when I take this back to work I will be on 2007. If using the whole range M:M is not possible then I could just extend out to M2:M7000 which should cover the range.
PAS Sheet

LM1Count of PASPAS22FD093 FD094 FD645 FD646 FD64
Spreadsheet FormulasCellFormulaL2=SUM(IF(FREQUENCY(MATCH(M2:M6,M2:M6,0),MATCH(M2:M6,M2:M6,0))>0,1))

Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4

View 9 Replies View Related

Eliminate All Of The Duplicate Entries

Feb 5, 2009

I have a spreadsheet that has account numbers listed multiple times. I need to eliminate all of the duplicate entries...Is there a formula for this...?

View 9 Replies View Related

Eliminate Duplicates On A 1 For 1 Basis

Feb 20, 2009

I have a huge list of accruals and payments. Accruals (positive) are entered, and at a later date are offset by the payments (negative). Im trying to make a schedule so i can determine which are left over.

This is easy to do manually for a small amount of rows. However im dealing with 5000 rows and i do not want to manually match it would take many days to do.

Ive tried a duplicate remover. To get it to work i made an absolute value column for the negatives, and compared it to the positives column to find the duplicates. This works to a point. However, If i have three accruals for 100, and one payment for 100, all are identified as duplicates which obviously is not what im looking for.

I need to get it where one accrual is matched to one payment. if there are 3 accruals, 2 payments, 1 is not a duplicate. if there is 3 accruals, 1 payment, 2 are not duplicates.

View 9 Replies View Related

Eliminate Save As Possibilities

Apr 27, 2006

I want to eliminate the possibilities of numerous copies of a file being SavedAs something else, 'cos that just turns into a mess.

I've set my Options/Security to Read Only & I've disabled modification with (password protected).

This workbook contains many formulae & users are welcome to go into it to perform whatever calculations they may require, but I wish to eliminate to possibility of users Saving As, thereby creating numerous copies of the same workbook.

I'll admit now, I don't really understand the "Option Explicit" feature, and does it pertain to this.

View 5 Replies View Related

Eliminate Apostrophe From Formatting

Jul 28, 2006

I have a list of data that is 23K rows deep and need to match to eliminate duplicates. I know how to match but have been unable to format a key column to eliminate the leading apostrophe (e.g. 'KJM03390) from a mixed alpha-numeric field.

View 5 Replies View Related