From this forum I've borrowed code and reused in my own CapEx approval form. The form is originated and goes through three people for approval. Everything seems to work ok on the form but it always forwards to the first approver rather than the next in sequence. I cannot see where the code is wrong.
View 2 RepliesI am trying to get a form sent as an email by pressing he control button without having to cut and paste into an email sheet. I have tried with
[Code] .....
but the code I put in only opens a new email form, which requires cut and paste.
I have a workbook that has several macros. When the workbook is saved, it cycles through and kicks off several of them.
This works fine, no errors. I have another macro that saves and then emails the workbook. When this macro runs, the same set of macros is launched due to the save method however it errors during one of the macros.
Basically what's happening is that the one macro (derivecountry) unprotects a sheet and inputs a data value. This macro works fine when run independantly but when it runs as a result of the email macr, the sheet does not get unprotected and the error results.
Here is the code line that runs to unprotect but doesn't always work
ThisWorkbook.Sheets(strShtName).Activate
ActiveSheet.Unprotect (strPassword)
I've also tried
ActiveSheet.Unprotect password:=strPassword
i run this macro but it fails
Can anbody tell me why please?
And how can i correct it? .....
This macro should copy all data from all worksheets and past them into the sheet named "Consol" however It is not looping and only pastes the one sheet.
Sub LoopThroughSheets()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
Formula
FinalRow = Range("A65536").End(xlUp).Row
Range("A2:U" & FinalRow).Copy
[code]....
I am unable to create a macro and later go back and assign a shortcut key and run the macro.
View 9 Replies View RelatedI have an Excel 2007 workbook with over a dozen user forms and plenty of code that I have mainly obtained from the web and tweaked to suit my needs. I am a novice with VBA, so not really up to writing anything but quite simple code.
My issue is I have some code set to fire on Workbook_Open that will save a versioned copy of the workbook, to the same network folder that the original resides in, with an incrementally increasing file name. the file is stored on a network, but access should not be an issue as I have full access and have no problem saving to this folder, also the event works fine up until I shut down Excel. I have also tried saving to My Documents to avoid the network issue, same result, worked fine as long as Excel is not closed, fails if I do.
It all works fine until I close down excel completely and re-open, where it then fails to work. There are other events happening in the same Workbook_Open sub that still work fine each time, so the sub is firing on open, but this one event fails. I get no error message at all, just no new file copy created.
The workbook is essentially doing the job of an Access database (I know even less about Access), I have a user form as a main menu and various other forms for various data entry and reporting tasks. I am exiting the w/book via a cmd button on the main menu (I've deliberately restricted users control, as many are not very pc literate). I have conducted numerous trials consisting of running the code from the VBA window, closing w/book via cmd button WITHOUT accepting the std save option and re-opening from Explorer window, closing w/book via cmd button WITH accepting the std save option and re-opening via Explorer and all worked perfectly over many sample runs. But when I closed Excel totally (Not just the w/book), created a desktop shortcut and opened from there, that line of code just doesn't seem to do anything, no error or hang or anything. The only way I can get it to function again, is to re-save the w/book (As either a new file with code edited to suit, or overwrite the original), and keep Excel open whilst only closing this w/book. It then functions perfectly again on opening.
I have enclosed below the Workbook_Open sub and some other subs that append to a user log on opening, these work fine all the time. I enclose the others in case they may have some bearing, as they are also fired from the Workbook_Open sub and show no issues at all.
Any suggestions gratefully accepted as I am struggling. As mentioned above, the ONLY part of the Workbook_Open sub that fails is the line "ThisWorkbook.SaveCopyAs newFileName". I have even added "MsgBox "The new FileName is: " & newFileName" immediately after it, and that displays new filename correctly. It seems to me to be hingeing around the SaveCopyAs event, but I don't want to assume that, being the novice I am.
I'm finding that my add-ins that worked perfectly on Excel 2003 are not functioning on Excel 2007. One of the main issues seems to be loading any UserForms that use the RefEdit control. I get a message saying:
--------------------------------------------------
Run-time error '459':
Object or class does not support the set of events
--------------------------------------------------
I have the the need to show the sum of the product of sheet 2 on sheet 1 if several conditions are met.
The formula is working except for the first array:
=SUMPRODUCT(--(Bid_Circuits=$A2),--(Bid_Week_End=MONTH(D2)),--(Bid_Week_End=YEAR(D2)),--(Bid_Completed))
When I use XL's evaluate feature, XL seems to find the proper data yet returns #VALUE!
The below code works well if it is on the proper sheet, if the active sheet is not active then it errors- Why? I think I have properly qualified the path to the desired sheet I wish to search on.
Error msg: Activate method of Range class failed
And how do I handle this?
Set Ws = Workbooks("ViewRenameDeleteFiles.xls").Sheets("Item Record List")
What = InputBox("Enter the Name You are Searching for its Record#", "Item Name Searching On")
Ws.Cells.Find(What:=What, After:=ActiveCell, LookAt:=xlPart, _
SearchOrder:=xlByRows, SearchDirection:=xlNext).Activate
I have written the following code that is supposed to be running on opening a work book. The macro is being called via Application.Run "CreatePT" which is in the this workbook code in a Sub workbook_open().
The code run on its own is fine with no errors... It only bombs out when its called via application.run then its a run time error 1004? ...
I have the following code which works successfully on my Excel 2002 PC and my Excel 2003 PC.
However when I take it to a clients machine it fails...
I made a new class to make other code less redundant, but it isn't functioning. The class has a "workbook" and "worksheet" member, and these can be accessed through properties. The problem is that the properties don't actually seem to return anything, and no data can be accessed through them.
Private mActiveWorkBook As WorkBook
Private mActiveWorkSheet As Worksheet
Property Get wSheet() As Worksheet
wSheet = mActiveWorkSheet
End Property
Property Get wBook() As WorkBook
wBook = mActiveWorkBook
End Property
'Sets active WorkBook
Sub SetActiveWorkBook(ByVal wBook As String)
Set mActiveWorkBook = Workbooks(wBook)
End Sub
'Sets the activeWorksheet in the workbook.
Sub SetActiveWorkSheet(ByVal wSheet As String)
If mActiveWorkBook Is Nothing Then
MsgBox ("Invalid WorkSheet selection - WorkBook not defined")
Return
End If
Set mActiveWorkSheet = mActiveWorkBook.Worksheets(wSheet)
End Sub
This class is used in the macro as such:
Dim uDate As Updater
Set uDate = New Updater
uDate.SetActiveWorkBook ("Book1.xls")
uDate.SetActiveWorkSheet ("TestTab")
'Below Code is not functioning
uDate.wSheet. Range("A1").Value = "foo"
' Expected result - set Cell A1 in sheet testTab = "foo"
' Actual Result - nothing
Dim st As String
st = uDate.wSheet.Range("B5").Value
MsgBox (st)
' Expected results - bring msgBox of values of cell B5, this cell is not empty
' Actual Result - Empty Message box comes up
So - its fairly obvious to me that something is wrong with the properties. The members themselves are not null, I have verified in the debugger that the class members refer to actual sheets/workbooks, but the properties don't like passing anything out and show as "variable not set" in the debugger. How can I get this to work?? It works fine when I do not use the class, like such:
Dim wB As WorkBook
Set wB = Workbooks("Book1.xls")
Dim wS As Worksheet
Set wS = Worksheets("TestTab")
Dim st As String
st = wS.Range("B5").Value
msgBox(st)
But I would like to get the class and properties to work to save clutter elsewhere.
I have a dynamic named range in my worksheet:
Range Name = AssignDt
RefersTo: =OFFSET('Raw Data'!$W$2,0,0, COUNTA('Raw Data'!$A:$A)-1,1)
I perform a routine in VBA which deletes unwanted rows of data from my worksheet. The problem occurs if row 2 happens to be one of those rows. It not only deletes Row 2, but it also deletes my Named Range.
I am trying to compare to values that a user inputs in a user form. It's ok if they are not the same I just want the user to know it. I am only including the part where the if statement is failing:
VB:
If Me.VSLongQuant.Value <> Me.VSShortQuant.Value Then
MsgBox VerUnBal
If VerUnBal = vbNo Then
Exit Sub
End If
End If
I have VerUnBal as Long and defined as:
VB:
VerUnBal = MsgBox("The Long and Short option Qunatities are not equal." & Chr(13) & _
"Is this intended to be an unbalanced vertical spread?", vbYesNo, _
"Unbalanced Spread Alert")
I can provide more info as necessary. There are two problems 1) the message box is appearing whether the numbers are equal or not, and 2) clicking No in the message box does not cause the Sub to exit.
I am trying to use the Cells Property in VBA but it is not working and I cannot figure out why for the life of me. Below is my ....
View 9 Replies View RelatedI have a protected worksheet with some macros running on it, and I have been requested to make the workbook shared. Trying to implement this, I keep getting the standard "1004 You cannot use this command on a protected sheet" error when applying an autofilter.
Here is what is making this problem a little tricky:
- As the workbook is shared, I cannot do Protect UserInterfaceOnly because you can't change the protection settings on a shared workbook without unsharing it. Needless to say, I cannot unshare the workbook.
- When I protect the sheet, I do allow the user to use autofilter. Consequently, Sheet.Protection.AllowFiltering and Sheet.EnableAutofilter both are on. Still, I keep getting the error.
The failing line of code is:
shData. Range("_filterDataBase").AutoFilter lngField, strArg
where shData is the codename of the sheet, lngField is the number of the field and strArg is the filtering criteria.
My guess is, that the error comes from the fact that (for some silly reason) in VBA the .AutoFilter method is used to create a new filter, not only to use an existing one. The members of Sheet.AutoFilter.Filters collection are read-only, and cannot be used to modify the existing filter.
I would like to search an outlook folder for a variable in the subject line and return the date when that email was received. Here is the code i have so far...
Code:
Sub Get_pos()
Set olApp = CreateObject("Outlook.Application")
Dim olNs As Outlook.Namespace
Dim Fldr As Outlook.MAPIFolder
Dim olMail As Variant
Set olApp = New Outlook.Application
[Code] ........
I have specified the email addresses in the code to whom the email will be sent when the user presses "Send Email" button but now I want to add all the addresses in the Access table and write down the code that will send an email to those people whose addresses are in the Access table.
[Code] .....
I have a macro to send emails to a group people that based on various criteria, it will attach a number of files to a recipient's particular email. This is a small portion of the code that does the attachment adding:
Code:
If Range("B" & a) = "Y" Then
If citChev "" Then .Attachments.Add citChev
End If
If Range("C" & a) = "Y" Then
If citMits "" Then .Attachments.Add citMits
End If
If Range("D" & a) = "Y" Then
If citToyo "" Then .Attachments.Add citToyo
End If
If Range("E" & a) = "Y" Then
[code].....
Most people get several of the files attached to their email and all works fine. But, there are certain conditions when all the IF() stmts fail where a recipient will not get any files attached. I do not want to send the email if this is the case, but it currently is sending it.
Is there a way after all the IF() stmts have processed to check to see if this current email has any attachments assigned to it? (IF .Attachments "" Then...) does not work.
I am using Excel 2010. I have been given a task at work that can save my team a lot of time if I can solve the problem. Every month, we have a spreadsheet with about 5000 rows that we have to email. In each row, there is a range that we have to email to a specific email. For example, I would have to copy and paste Range A2-R2 in the body of the email, and then email it to whatever email is in cell S2. I would then continue this for the next 5000 lines, making it a possibility that i will be sending 5000 emails manually.
I have been trying to come up with a solution through VBA that would automatically send these emails. My goal is to automatically send the Range A2-R2 to outlook email, then cell S2 into the "To" email address box, and then automatically send it. So far, i have successfully been able to send one row, but cannot figure out how to loop it for the remainder of the rows.
A couple other key points are that I have column headings as well (Range A1-R1). If possible, I want to be able to include the column headings in the email body as well. Example - first email would be range A1-R2. second email would be range A1-R1 and A3-R3, and so forth. The body of the email would also contain a standard script, such as "Please review the information below."
The goal here is to save everyone from having to send 5000+ manual emails. This would be a big boost for my team.
Code:
Sub Email()
Dim rng As Range
Dim OutApp As Object
[Code].....
I currently have a button then when pressed automatically sends a summary report taken from the first page of Sheet 1.
Worksheet needs to be protected all the time, but Macro only works on an unprotected worksheet.
I was wondering what additional code and where to put in so that when
protected back again after Macro has been executed?
Here’s the Macro taken from [url]
I have the below code to email a specific sheet to an email address, however the email stays in the outbox and isn't sent. Is there something missing from the code or is it a setting issue with my email? I'm using Outlook 2010.
[Code]....
When I test the email link on my computer, the 'Outlook Express setup' wizard initiates. However, I don't use Outlook Express (Yahoo and Zimbra).
I am wondering of it is possible to automatically ensure that in cases where a user doesn't use Outlook Express by default that Excel will open the users default email client- which could be a web browser or another application? Is this something determined by each users (Control Panel?Registry?) settings for handling email hyperlinks? Is there a piece of VBA code I could include in the workbook which identifies the relevant email client to open?
I know I can simply provide my email address on the workbook and allow a user to copy/paste it into their email application but I feel that by minimising the amount of effort required by a user to provide a rating that I'll be more likely to receive user rating feedback.
I have a spreadsheet which contains 30,000 lines Column A contains an email address. This spreadsheet was merged from several and so I know that there are duplicates in it.
How can I look up column A and if an identical value (email address) is found further down the sheet on another row. Delete that duplicate row?
I'm not concerned that the data may not be identical in other columns. If the email is a duplicate delete the next and all other rows that contain that email address.
I am trying to send an automated email by use of a "email" button. What I want it to do is to pop up a input box that will ask me who I want to send the email to, and once I hit ok it will send open up outlook and send the email. I have the code to work if I want it to be sent to a specific email address, but I can't seem to get the email address entry part to work. I will attach my code as it lays right now.
Private Sub CommandButton2_Click()'Need to reference: Microsoft Forms 2.0 Object LibrarySet OutApp = CreateObject("Outlook.Application")OutApp.Session.LogonSet OutMail = OutApp.CreateItem(0)strbody = "This is the most up to date copy of EAS Tracking 2.0 as well as the Resource Planning Sheet."attachmnt2 = "C:My DocumentsResource Planning Sheet_External.xls"On Error Resume Next'?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|? BELOW IS WHERE I CAN'T GET TO WORK!!!With OutMailDim range As Longrange = Application.InputBox("How many copies do you want?", "Number of Copies").To = range.Subject = "This Weeks Reports".Body = strbody.Attachments.Add (attachmnt2).Display.SaveEnd With'__________________________________________________attachmnt3 = "C:My DocumentsReport DataWork Request Tracking Data FolderEAS Request 2.0.xls"On Error Resume NextWith OutMail.Subject = "This Weeks Reports".Body = strbody.Attachments.Add (attachmnt3).Display.SaveEnd .........
I'm creating an excel file that can email itself inside the body of a HTML in Outlook. I have found some code from the web and have re-fitted it so that I may use it for my purpose. My main issue is this: I cannot keep my default Outlook signature on the email when it gets sent.
View 3 Replies View RelatedI am using the following code and it works great the only problem is that when I have more then one email address in the same cell it will not send the email. Even if I seperate it with a semicolon. It work fine if I have just one email address in the email field. How can I get it to send the same info to different email addresses.
View 4 Replies View RelatedI have created a user Form where a user can enter all the details like (First name, last name, Email ID etc...). the entered data is submitted on Sheet1 and it is working for me.
Now which I want is the is it possible to pick up the last email id (Column D) and send an automatic email where email will be sent the last recipient?
Actually I want is that when a user will fill up the form I want to send him/her an email.
We know that professional emails have a fixed format. I have a list of people with their names and emails and there are some people for which emails are missing. I am pasting my sample data below. But first let me explain the meaning of columns.
Column A: Means full name of the person for which we have email id
Column B & C: just split of Available full name into first name and last name
Column D: Email id of the person with full name in column A
Column E: For the names in this column, we need to get email ids
Column H: Sample result
Now basis on the Full Name(Column A) and Email Id(Column D) can we get the email id for person in Column E.
Sheet4
A
B
C
D
E
F
G
H
1
Available Full Name
Available FirstName
Available LastName
Email for available full name
Actual Full name
Actual firstname
Actual lastname
Sample result
[Code] .........