VBA - Cells Property Failing - Object Does Not Support This Method
Jan 5, 2010I am trying to use the Cells Property in VBA but it is not working and I cannot figure out why for the life of me. Below is my ....
View 9 Replies
ADVERTISEMENT
Error 438: Object Doesn't Support This Property Or Method
Oct 3, 2008When I run my code (which opens Excel from Access) it does everything it is supposed to but I then get the above error but I do not get the error if I open the VBA window and then run the code. (The code is password protected, not sure if this is relevenat though).
Run Time Error 438: Object Does Not Support This Property Or Method
Jan 8, 2009I'm getting a really weird error in that I can't reproduce it. It sometimes occurs when I open the document and sometimes not. HEre is the
Private Sub Workbook_Open()
Dim dic, Dn As Range, rng As Range
Set rng = Sheets("Moisture").Range("B2:B1000")
Set dic = CreateObject("Scripting.Dictionary")
With dic
For Each Dn In rng
If Not .exists(Dn.Value) Then
.Add Dn.Value, ""
End If
Next Dn
Set wksPayment = Sheet10
wksPayment.ListBox2.List = .keys
End With
End Sub
The line that hangs up is the wksPayment.Listbox2.List = .keys line. Any ideas or ways to test or further figure out what is causing the problem?
Copy/Paste Error Object Doesn't Support This Property Or Method
Oct 16, 2008The macro below is stored within worksheet "Data Lookup". When the value in B1 changes, the code is executed but fails when it comes to the paste function. I get a "Object doesn't support this property or method".
Also, it appears the copying is not occuring correctly. It is supposed to copy from the Data3 worksheet but, in fact, its copying from the Data Lookup worksheet. Does storing this macro within a worksheet prevent the macro from moving between sheets?
Sub Worksheet_Calculate()
If Range("B1").Value = Range("N1").Value Then End
Sheets("Data3").Select
Cells(13, 6).Copy
Sheets("Data Lookup").Select
Cells(23, 11).Paste
End Sub
Excel 2003 :: Runtime Error 438 - Object Doesn't Support This Property Or Method
Nov 1, 2012I am using Excel 2003. I get the above error and when I press debug, the issue highlighted is the following:
Code:
graff:
adde.TextBox6.Text = "ok"
shet = ActiveSheet.Name
Set CurrentChart = ActiveSheet.ChartObjects.Add(5, 20, 350, 200)
[Code].....
Error "Object Does Not Support This Property Or Method." When Changing The Range Of A Series On A Preexisting Graph
Nov 19, 2009I'm trying to write some code to make an existing chart display the correct series of data. However, on the ".SeriesCollection..." lines, it gives me the error "Object does not support this property or method." I'm using a Bar-Line graph, if it makes any difference.
View 5 Replies View RelatedRemove Lines In Chart (object Doesn't Support Property Error)
Dec 12, 2011I'm trying to remove lines in my line charts. I searched the internet and find the following code:
Code:
Sub RemoveLines()
Dim ser As Series
For Each ser In ActiveChart.SeriesCollection
ser.Format.Line.Visible = False
Next ser
End Sub
However, when I run the code, I got "Object doesn't support this property or method". I did select the chart. I have excel 2003 with vba 6.5.
Finding A Cell In A Row :: Object Doesn't Support This Poperty Or Method
Jan 6, 2009I have a userform listbox2 that i am trying to save info from to a worksheet.
I am getting the error "Object doesn't support this poperty or method" when I am trying to set the cell of a find ......
Add Image To Userform - Error Object Doesn't Support Method
Nov 6, 2013Following code from net and applied.
But runtime error on the highlighted line: "object doesn't support this property or method
Code:
Private Sub cbAddImage_Click() With Application.FileDialog(msoFileDialogFilePicker)
.AllowMultiSelect = False
.ButtonName = "Submit"
.Title = "Select an image file"
.Filters.Add "Image", "*.gif; *.jpg; *.jpeg", 1
[Code] .......
FileSearch Method In 2007, Run-time Error 445 Object Doesn't Support This Action
Sep 14, 2007I was using the following macro on Excel 2000, 2002 & 2003 for many years without a fuss. Recently, I upgraded to Excel 2007. When I run the macro now, I get the following error message:- Run-time error 445 Object doesn't support this action.
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "C:Documents and SettingsDesktopCommercial Database"
.SearchSubFolders = True
.Filename = "*.*"
.TextOrProperty = "BANK"
.MatchAllWordForms = True
.FileType = msoFileTypeAllFiles
If .Execute() > 0 Then
MsgBox "There were " & .FoundFiles.Count & _
" file(s) found."
End If
End With
End Sub
Additional info:- The 1st line of my code which is With Application.FileSearch is highlighted in yellow when I run this macro.
Returning Workbook/sheet Through Property Is Failing
Mar 27, 2007I made a new class to make other code less redundant, but it isn't functioning. The class has a "workbook" and "worksheet" member, and these can be accessed through properties. The problem is that the properties don't actually seem to return anything, and no data can be accessed through them.
Private mActiveWorkBook As WorkBook
Private mActiveWorkSheet As Worksheet
Property Get wSheet() As Worksheet
wSheet = mActiveWorkSheet
End Property
Property Get wBook() As WorkBook
wBook = mActiveWorkBook
End Property
'Sets active WorkBook
Sub SetActiveWorkBook(ByVal wBook As String)
Set mActiveWorkBook = Workbooks(wBook)
End Sub
'Sets the activeWorksheet in the workbook.
Sub SetActiveWorkSheet(ByVal wSheet As String)
If mActiveWorkBook Is Nothing Then
MsgBox ("Invalid WorkSheet selection - WorkBook not defined")
Return
End If
Set mActiveWorkSheet = mActiveWorkBook.Worksheets(wSheet)
End Sub
This class is used in the macro as such:
Dim uDate As Updater
Set uDate = New Updater
uDate.SetActiveWorkBook ("Book1.xls")
uDate.SetActiveWorkSheet ("TestTab")
'Below Code is not functioning
uDate.wSheet. Range("A1").Value = "foo"
' Expected result - set Cell A1 in sheet testTab = "foo"
' Actual Result - nothing
Dim st As String
st = uDate.wSheet.Range("B5").Value
MsgBox (st)
' Expected results - bring msgBox of values of cell B5, this cell is not empty
' Actual Result - Empty Message box comes up
So - its fairly obvious to me that something is wrong with the properties. The members themselves are not null, I have verified in the debugger that the class members refer to actual sheets/workbooks, but the properties don't like passing anything out and show as "variable not set" in the debugger. How can I get this to work?? It works fine when I do not use the class, like such:
Dim wB As WorkBook
Set wB = Workbooks("Book1.xls")
Dim wS As Worksheet
Set wS = Worksheets("TestTab")
Dim st As String
st = wS.Range("B5").Value
msgBox(st)
But I would like to get the class and properties to work to save clutter elsewhere.
Object Does Not Support This Action Error 445
Jul 7, 2009When I execute this, I got error run-time error 445, object does not support this action. I am using window vista, microsoft office 2007. How can i change the code to make it workable?
View 2 Replies View RelatedRun-time Erro '445' : Object Doesn't Support This Action
Nov 3, 2008While clicking a button in the excel, am getting a run-time error. Everybody's need is urgent even I understand boss. Anybody else who is in the same shoes as mine. Here goes the solution:
View 5 Replies View RelatedFilesearch ‘object Doesn’t Support This Action’ Error
Nov 29, 2006Not sure if I am having a brain fade or not but the following code gives an ‘Object doesn’t support this action’ error (at the ‘with..’ line) and I can’t figure out why.
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "D:"
.FileType = "*.*"
MsgBox (.FoundFiles.Count)
End With
End Sub
Error 'Method Range Of Object Global Failed' On FindNext Method
Dec 10, 2008I'm trying to get the Find and FindNext methods to work. Column C contains serial numbers and there's a chance that a serial number might appear more than once in the column. What I'm trying to do is get Excel to find the first occurance of the serial number, find what row it's on and then see if this matches the variable 'CurRowNo' (defined earlier in the code). If it doesn't I want it to look at the other occurances of the serial number, find what row they're on and see again if it matches CurRowNo.
The variable 'EngCount is the number of occurances of the serial number (also worked out earlier in the code). I've got the code below, but I get the error 'Method Range of Object Global Failed' on the FindNext line. I have no idea what this error means or why it's happening.
Method 'Add' Of Object 'CommandBarControls' Failed
Mar 2, 2007The following code below was very kindly created for me by someone approx 12 months ago and I have been using it without any problems at all.
The purpose of the code is to creates a new Menu/Title item named "Quality" on the main Excel menu bar at the top of Excel and place it between the "Windows" and "Help"
This new Quality menu then has further drop lists which i can add as suited.
Two days ago i started getting the following RunTime Error everytime i open Excel and i can not longer get the new menu "Quality" to show on my Excel menu bar.
run-time error '2147467259 (80004005)':
Method 'Add' of object 'CommandBarControls' failed ........
Method 'value' Of Object 'range' Failed
Jan 24, 2009I have a while loop in which I'm updated information in 2 separate worksheets. I'm using the With-block statements separately to update each, but after the 30th iteration (and it's always on the 30th), the VBA code halts and get the "method 'value' of object 'range' failed" error message pointing to a line with the code as follows:
With Sheet1
.Cells(lngRow, 9).Value = intMonths
End With
where "intMonths" is an integer variable which I'm populated properly, and "lngRow" a long variable. When I debug both variables have proper data in them, and I have no idea why this is bombing.
Method Returning Activated Object Name?
Aug 23, 2006How do I add multiple worksheets at once after opening a new workbook? I was able to go to Insert>Workbook but it only adds one sheet at a time. I I need to add 50 woorksheets, I don't want to really click 50 times.
Insert a new worksheet
To add a single worksheet, click Worksheet on the Insert menu.
To add multiple worksheets, hold down SHIFT, and then click the number of worksheet tabs you want to add in the open workbook. Then click Worksheet on the Insert menu.
When I hold down the shift button and enter 50 i get the "%" and ) sign entered on the open workbook and then I try to click worksheet from the insert tab and it is greyed out.
Object Required: Union Method
Nov 9, 2006columnA contains account numbers sorted in ascending order i need to use the union method to select all rows where the account number changes so that later i can insert rows between different account numbers in one action. i tried to use the following code but an error occurs stating 424 object required ....
View 7 Replies View RelatedMethod 'location' Of Object '_Chart' Failed
Oct 24, 2008I'm currently working on a fairly complex VBA project in Excel 2007. Basically though, I'm downloading information from a site, massaging it, creating a lot of graphs, saving them locally, deleting the chart from excel. I then save a copy of the workbook to a local file, clear the Spreadsheet, and then Do the same for information from another site.
When I had all of the code in one Module and ran it as a macro it ran flawlessly.
Now i've put the information into a Class. And am pretty much running the same process via a UserForm.
The problem I have though is that at any point after I execute the (and please assume that all variables have been declared, because they have)
Method 'Range' Of Object '_Worksheet' Failed
Jun 23, 2009I can't seem to figure out why this keeps giving me that error...
I've checked the row and column values inside and they seem to be ok. blank_ee() is an array of strings.
Method Open Of Object Workbooks Failed
Feb 9, 2010I need some help with this error. I have some VBA code in Outlook that runs whenever a task reminder goes off. The code is supposed to open a workbook, send email based on the info in the workbook, then close the workbook and quit excel.
The task reminders are set to go off every two hours. Sometimes this will work fine for days and then randomly (as far as I can tell) I get the error: "Method Open of Object Workbooks failed". If I press Debug and then Run without changing anything at all, it works fine.
I am using Outlook 2007 and Excel 2007. The workbook is a shared workbook on a network drive.
I can post code if needed, but will have to go to that computer.
Why do I occasionally get this error when the workbook definitely exists and has the same name and path?
What does entering debug mode do that then allows the macro to run without error?
Method Range Of Object Worksheet Failed
Sep 10, 2006Sub a()
z = 4
y = 7
sWork. Range(Cells(1 + nRow(z), 4), Cells(1 + nRow(z), 12)).Replace y, 0 lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False
End Sub
but when I include it in my main code
sWork.[A1:L9] = 123456789
For z = 1 To 81
y = [A1].Offset(nRow(z), nCol(z))
If y > 0 Then
sWork.Cells(1 + nRow(z), 1).Replace y, 0, lookat:=xlPart,searchorder:=xlByRows, MatchCase:=False, matchbyte:=False
sWork.Cells(1 + nCol(z), 2).Replace y, 0, lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False, matchbyte:=False
sWork.Cells(1 + nBox(z), 3).Replace y, 0, lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False, matchbyte:=False
sWork.[A1].Offset(nRow(z), nCol(z) + 3).Value = 0
sWork.Range(Cells(1 + nRow(z), 4), Cells(1 + nRow(z), 12)).Replace y, 0, lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False
sWork.Range(Cells(1, 4 + nCol(z)), Cells(9, 4 + nCol(z))).Replace y, 0, lookat:=xlPart, searchorder:=xlByColumns, MatchCase:=False
sWork.Range(Cells(1 + Int(nRow(z) / 3) * 3, 4 + Int(nCol(z) / 3) * 3), Cells(3 + Int(nRow(z) / 3) * 3, 6 + Int(nCol(z) / 3) * 3)).Replace y, 0, lookat:=xlPart, searchorder:=xlByRows, MatchCase:=False
End If
Next
I get a "Method 'Range' of object '_Worksheet' failed" error at line 9,
when z = 4, y = 7, and nRow(z) is a UDF which = 0.
Method 'Range' Of Object 'Global' Failed
Nov 8, 2006I have a button on my spreadsheet which activates some code, it has worked perfectly for over a year but now for some reason I cannot get it to work.
When I click on the button now I get the message: Run-time error '1004' Method ' Range' of object '_Global' failed.
the file is far too large to attach here but here is the relevant ...
Method 'goto' Of Object Application Failed
Dec 16, 2006why i'm getting this run time error :"Method 'goto' Of Object 'Application' Failed"?
Sub SynchSheets()
Dim wSheet As Worksheet
Dim rRange As Range
Dim dZoom As Double
Dim wSheetStart As Worksheet
Set wSheetStart = ActiveSheet
Application. ScreenUpdating = False
With ActiveWindow
Set rRange = .VisibleRange.Cells(1, 1)
dZoom = .Zoom
End With
Method 'copy' Of Object '_worksheet' Failed
Feb 15, 2007From the current open book, I'm opening a 2nd book, then copying all worksheets from the 2nd book that meet criteria, into 1st book, (in the same order), but am getting Method 'Copy' of object '_Worksheet' failed error. What am I doing wrong?
How to OVERWRITE worksheets?We'll be running the same process with new data, so also need to overwrite worksheets in 1st book.
Sub Build_Branch_File()
Dim FileName As String
Dim Wkb As Workbook
Dim Ws As Worksheet
Dim WNum As String
Dim Tnum As String
Dim RegionNo As Integer
Dim Original_Wb As Workbook
With Application
. ScreenUpdating = False
.EnableEvents = False
.DisplayAlerts = False
End With
Set Original_Wb = ThisWorkbook .........................
Method 'range' Of Object 'worksheet' Fails
Apr 26, 2007I'm trying to accomplish the following: on "LogSheet" sheet, click on the DailyCloseButton and have various lists on the "lists" sheet automatically sorted before I save and end. The code below gives an error: "Method ' Range' of object '_Worksheet' failed". I have no idea why it failed.
Private Sub DailyCloseButton_Click()
' DailyClose and sort routine
'Sort lists
Sheets("Lists").Activate
Range("Products").Select
Range("Products").Sort Key1:=Range("Products").Cells(2, 1), _
Order1:=xlAscending, Header:=xlYes, OrderCustom:=1, MatchCase:=False, _
Orientation:=xlTopToBottom, DataOption1:=xlSortNormal.............
Method 'intersect' Of Object '_global' Failed
May 19, 2007item = InputBox("Please Select Row Number of Child to be Removed")
myString1 = Range("$a" & item & ":$c" & item, "$e" & item & ":$j" & item).Select
I copied this code from a prior worksheet and the range was not split (i.e. just "$a" & item & ":$c" & item). When I try to make the range selection grab two separate areas, I get the above listed error. Do I not have the quotations right? I have tried them several different ways. Not sure what else to try.
Method 'Route Object'_workbook' Failed
Jun 27, 2007Sub Approve()
Calculate
If IsEmpty( Range("D67")) Then
Range("D67").Value = Application.UserName
ElseIf IsEmpty(Range("E67")) Then
Range("E67").Value = Application.UserName
Else:
Range("F67").Value = Application.UserName
End If
ActiveWorkbook.Route
End Sub
I am clicking on a an approve button which executes this code. But when I click the button the error reads: Run-Time error 1004, Method 'route'object'_workbook'failed.
Method Range Of Object Worksheet Failed ..
Jul 6, 2007I am having a problem with this bit of code. When I try to run it it shows Method Range of object Worksheet Failed.
The original code I adapted this from works just fine, and the only thing I have changed is the ranges and the sheet.
The code is:
Sub Filter()
With Sheet18
'
.Range("DisbData").AdvancedFilter Action:=xlFilterInPlace, _
CriteriaRange:=.Range("Criteria"), Unique:=False
.Range("DisbData").SpecialCells(xlCellTypeVisible).Copy Destination:="DisbPaste"
.ShowAllData
End With
End Sub
The line that the debugger is showing has issues is:
.Range("DisbData").AdvancedFilter Action:=xlFilterInPlace, _
CriteriaRange:=.Range("Criteria"), Unique:=False