' Select the range of cells on the active worksheet.
ActiveSheet.Range("A1:B5").Select
' Show the envelope on the ActiveWorkbook.
ActiveWorkbook.EnvelopeVisible = True
It works...sometimes. It opens the mail address/subject bar at the top of the page, and it gives me the typical warning that Outlook is being asked to send an email from an external source. I click "Allow" and it sends. Well, it sends sometimes. Other times, when I don't receive the email after a few minutes, I open Outlook and there it is sitting in the Outbox. I have to hit send in order to make it actually send out.
Is there something that I am not noticing that I am doing incorrectly? I would think that if it doesn't work, its the code, but without changing any of the code, it'll end up working another time that I run it, so I would think the code is correct.
I want the range to stay as i put it without it +1 when i drag the formula down my spreadsheet, below is the formula im using (for a creche in case your wondering)
=IF(G5<A8,"Baby",IF(G5<A16,"Wobbler", IF(G5<A24,"Toddler",IF(G5<A30,"Playschool","Please use DD/MM/YYYY FORMAT"))))
G5, A16, is taken from a list of dates down the side so i need these to remain constant otherwise my formula goes out.
I'm using an old CP code to display a list of all worksheets when a button (from control toolbox, not forms) is clicked:
Sub SheetList_CP() 'Chip Pearson, 2002-10-29, misc., %23ByZYZ3fCHA.1308%40tkmsftngp11 'Dave Peterson, same date/thread, 3DBF0BA8.4DAE9DA0%40msn.com On Error Resume Next Application.CommandBars("Workbook Tabs").Controls("More Sheets...").Execute If Err.Number > 0 Then Err.Clear Application.CommandBars("Workbook Tabs").ShowPopup End If On Error GoTo 0 End Sub
If I click the button and decide I don't want to go to another worksheet and click a cell to get out, the button stays depressed. Any ideas as to why?
I have been setting up some pivot tables. Down the left side of the pivot table is the values from a column labelled TRACKS. There are about eight different TRACKS. Say Track1, Track2, Track3, etc. I have set the data range up as a dynamic named range so that if more rows or columns are added to the data then the pivot table will automatically incorporate these.
Today I wanted to test that the pivot was working as expected. One of the things I did was stick a few extra values into the TRACKS column on the data source. These were TEST1 and TEST2. These appeared in the TRACKS down the left side of the pivot table as expected.
When I deleted these two test values, however, they would not disappear from the pivot table. There seemed to be nothing I could do to make them go away, except to rebuild the pivot table from scratch.
I am working in excel and for some reason when I hit the enter key it stays in the same cell. I never had this problem before, what did I do and how do I fix it?
Is it possible to use a date formula eg Today() to enter that days date when a blank cell say a1 gets data entered, then not change date the following day?
I would like to search an outlook folder for a variable in the subject line and return the date when that email was received. Here is the code i have so far...
Code: Sub Get_pos()
Set olApp = CreateObject("Outlook.Application")
Dim olNs As Outlook.Namespace Dim Fldr As Outlook.MAPIFolder Dim olMail As Variant
I have specified the email addresses in the code to whom the email will be sent when the user presses "Send Email" button but now I want to add all the addresses in the Access table and write down the code that will send an email to those people whose addresses are in the Access table.
I have a macro to send emails to a group people that based on various criteria, it will attach a number of files to a recipient's particular email. This is a small portion of the code that does the attachment adding:
Code: If Range("B" & a) = "Y" Then If citChev "" Then .Attachments.Add citChev End If If Range("C" & a) = "Y" Then If citMits "" Then .Attachments.Add citMits End If If Range("D" & a) = "Y" Then If citToyo "" Then .Attachments.Add citToyo End If If Range("E" & a) = "Y" Then
[code].....
Most people get several of the files attached to their email and all works fine. But, there are certain conditions when all the IF() stmts fail where a recipient will not get any files attached. I do not want to send the email if this is the case, but it currently is sending it.
Is there a way after all the IF() stmts have processed to check to see if this current email has any attachments assigned to it? (IF .Attachments "" Then...) does not work.
I am using Excel 2010. I have been given a task at work that can save my team a lot of time if I can solve the problem. Every month, we have a spreadsheet with about 5000 rows that we have to email. In each row, there is a range that we have to email to a specific email. For example, I would have to copy and paste Range A2-R2 in the body of the email, and then email it to whatever email is in cell S2. I would then continue this for the next 5000 lines, making it a possibility that i will be sending 5000 emails manually.
I have been trying to come up with a solution through VBA that would automatically send these emails. My goal is to automatically send the Range A2-R2 to outlook email, then cell S2 into the "To" email address box, and then automatically send it. So far, i have successfully been able to send one row, but cannot figure out how to loop it for the remainder of the rows.
A couple other key points are that I have column headings as well (Range A1-R1). If possible, I want to be able to include the column headings in the email body as well. Example - first email would be range A1-R2. second email would be range A1-R1 and A3-R3, and so forth. The body of the email would also contain a standard script, such as "Please review the information below."
The goal here is to save everyone from having to send 5000+ manual emails. This would be a big boost for my team.
I have the below code to email a specific sheet to an email address, however the email stays in the outbox and isn't sent. Is there something missing from the code or is it a setting issue with my email? I'm using Outlook 2010.
When I test the email link on my computer, the 'Outlook Express setup' wizard initiates. However, I don't use Outlook Express (Yahoo and Zimbra). I am wondering of it is possible to automatically ensure that in cases where a user doesn't use Outlook Express by default that Excel will open the users default email client- which could be a web browser or another application? Is this something determined by each users (Control Panel?Registry?) settings for handling email hyperlinks? Is there a piece of VBA code I could include in the workbook which identifies the relevant email client to open?
I know I can simply provide my email address on the workbook and allow a user to copy/paste it into their email application but I feel that by minimising the amount of effort required by a user to provide a rating that I'll be more likely to receive user rating feedback.
I have a spreadsheet which contains 30,000 lines Column A contains an email address. This spreadsheet was merged from several and so I know that there are duplicates in it.
How can I look up column A and if an identical value (email address) is found further down the sheet on another row. Delete that duplicate row?
I'm not concerned that the data may not be identical in other columns. If the email is a duplicate delete the next and all other rows that contain that email address.
I am trying to send an automated email by use of a "email" button. What I want it to do is to pop up a input box that will ask me who I want to send the email to, and once I hit ok it will send open up outlook and send the email. I have the code to work if I want it to be sent to a specific email address, but I can't seem to get the email address entry part to work. I will attach my code as it lays right now.
Private Sub CommandButton2_Click()'Need to reference: Microsoft Forms 2.0 Object LibrarySet OutApp = CreateObject("Outlook.Application")OutApp.Session.LogonSet OutMail = OutApp.CreateItem(0)strbody = "This is the most up to date copy of EAS Tracking 2.0 as well as the Resource Planning Sheet."attachmnt2 = "C:My DocumentsResource Planning Sheet_External.xls"On Error Resume Next'?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|? BELOW IS WHERE I CAN'T GET TO WORK!!!With OutMailDim range As Longrange = Application.InputBox("How many copies do you want?", "Number of Copies").To = range.Subject = "This Weeks Reports".Body = strbody.Attachments.Add (attachmnt2).Display.SaveEnd With'__________________________________________________attachmnt3 = "C:My DocumentsReport DataWork Request Tracking Data FolderEAS Request 2.0.xls"On Error Resume NextWith OutMail.Subject = "This Weeks Reports".Body = strbody.Attachments.Add (attachmnt3).Display.SaveEnd .........
I'm creating an excel file that can email itself inside the body of a HTML in Outlook. I have found some code from the web and have re-fitted it so that I may use it for my purpose. My main issue is this: I cannot keep my default Outlook signature on the email when it gets sent.
I am using the following code and it works great the only problem is that when I have more then one email address in the same cell it will not send the email. Even if I seperate it with a semicolon. It work fine if I have just one email address in the email field. How can I get it to send the same info to different email addresses.
I have created a user Form where a user can enter all the details like (First name, last name, Email ID etc...). the entered data is submitted on Sheet1 and it is working for me.
Now which I want is the is it possible to pick up the last email id (Column D) and send an automatic email where email will be sent the last recipient?
Actually I want is that when a user will fill up the form I want to send him/her an email.
We know that professional emails have a fixed format. I have a list of people with their names and emails and there are some people for which emails are missing. I am pasting my sample data below. But first let me explain the meaning of columns.
Column A: Means full name of the person for which we have email id Column B & C: just split of Available full name into first name and last name Column D: Email id of the person with full name in column A Column E: For the names in this column, we need to get email ids Column H: Sample result
Now basis on the Full Name(Column A) and Email Id(Column D) can we get the email id for person in Column E.
Sheet4 A B C D E F G H
1 Available Full Name Available FirstName Available LastName Email for available full name Actual Full name Actual firstname Actual lastname Sample result
I need to email a page from a worksheet to a series of people and am currently using the following
Worksheets("Report").Activate ActiveWorkbook.Save
Dim wb As Workbook Dim strdate As String strdate = Format(Now, "dd-mm-yy h-mm-ss") Application. ScreenUpdating = False ActiveSheet.Copy Set wb = ActiveWorkbook With wb
however, I also need the worksheet to be email to the person currently running the macro (i.e. when they email it to the others, a copy is sent to thier own inbox too), is there any way in which this can be done?
The user's email address could be formed from data in the spreadsheet, if there is an easier way to do this (i.e. email address is based on a cell in the spreadsheet).
I have search on this forum regarding sending email on excel using outlook email application. I would like to ask if is it possible to use other email applications like AOL when sending email thru excel? I have attached a sample workbook.
What in the world did I do now? When I click on any cell, the cursor turns into a thick "+" . Then, when I move my mouse up and down the spreadsheet, all the cells the "+" touches become highlighted.
I need to send out an order form (spreadsheet) to 100's of people that need to complete the form and email back to me as an attachment. If I was completing the order form myself I would use the "email" icon that I have pinned to my Quick Access Toolbar (QAT). However, most of the recipients don't even know the Toolbar exists.
Is there a way I can insert an icon / hyperlink in the spreadsheet that does the same thing as the QAT icon. I can insert text to say "click here to email your order" (or similar).
I need to keep it in an excel format and an icon is so much better that asking them to save to their hard-drive and attach to an email, etc.
The QAT icon is exactly what is needed but I need to provide a spreadsheet that works for folk who haven't got the icon.
I have a problem sending email thru excel, if i use this =HYPERLINK(CONCATENATE("mailto:",B2,"?subject=",C3,"&body=",D4),"Send e-mail") <-- this is working, but i want my body to also include not just d4, i tried to put name d4:g7 as body so the code would be: =HYPERLINK(CONCATENATE("mailto:",B2,"?subject=",C3,"&body=",body),"Send e-mail") <<-- the problem is this is not working ,
