UserForm - Only One Button Toggled At A Time
Dec 31, 2008
I have made a UserForm with 12 buttons on it to switch between 12 different Worksheets and I am attempting to have the button pressed down only when the sheet is active. The buttons all work fine and go to the right sheet, but will stay toggled when I click on a button for another sheet.
I have tried to create a seperate macro that makes all the ToggleButton.Value = False, but this just activates the ToggleButton_Click() macro each time and loops on and on. Is there a way to change the value of the toggle without initiating the click subroutine? Do I even want to use ToggleButton?
View 4 Replies
ADVERTISEMENT
Jul 16, 2012
I have created a userform and a command button to bring up the user form but when I click on the command button and the user form pops up I am not able to enter any data, the entire page freezes
This is the code
Private Sub CommandButtoncancel_Click()
unloadme
End Sub
Private Sub CommandButtonOK_Click()
With Workbooks("RETS results version 2.xlsm")
[Code] ......
View 1 Replies
View Related
Mar 7, 2014
I have a workbook with macro button to run some vba, if i want the button to disable when the user make copies of the workbook (date created is later than original wb saved time) what codes to add in the VBA?
what i assume is to add the time to a cell when the wb is saved, when the wb opens, it check for that cell if the same with the date created, if different, then disable the macro button.
View 9 Replies
View Related
Dec 24, 2008
I have a userform that has a time field on it and then the userform displays the time as a number.
Ex. I entered 11:00 AM in the Time of Contact field and the form displays it as 0.458333333333333.
View 10 Replies
View Related
Jun 19, 2014
I have a userform that time stamps on my userform as soon as i open the form, is there a way that when I submit, that the amount of time that I was on the call to be put in my column on my worksheet as minutes?
View 2 Replies
View Related
Dec 15, 2008
I have created a userform for users to enter data and can not seem to make it work correctly.
I am having a issue on the Row Number Textbox. I am trying to get this textbox to reflect the current row number that I am viewing with the Userform.
I am also having a issue with the Last and Add New button.
I have formulas in Column A and Column H and when I try to go to the last Row or Add a new record it recognizes the formulas and it takes me to the row below where the formulas are. (Example Row 601 instead of Row 3)
View 7 Replies
View Related
Jan 1, 2013
It would be really good if I could not have the "close" (X) button in the top bar of my userform, I'm using it as a splashscreen, so I control when to shut it down, for that matter do I need to put up with the top ( blue ) bar at all?
View 2 Replies
View Related
Jun 28, 2014
Im have a userform with a listbox and a textbox and a commandbuttton
When i click the command button it adds the values from the listbox and textbox to the first empty row, that works fine but also want to add a new button on every row i add.
Something like this:
Column A, B, C
Listbox value, Textbox value, new button
Listbox value, Textbox value, new button
Listbox value, Textbox value, new button
Listbox value, Textbox value, new button
Etc
I have tried this code but the add button line seems to be wrong:
[Code] ,........
The whole code i use is:
[Code] .........
How to add a button togheter with the values from the listbox and textbox ?
View 1 Replies
View Related
Sep 30, 2008
I have a spreadsheet with a userform for inputing and deleting vehicles onto a spreadsheet, these are working fine,,,,
Before I try and figure it out, can 1 button be used to open a msg box and the userform at the same time
View 2 Replies
View Related
Mar 29, 2012
how to disable X button in the Userform?
View 2 Replies
View Related
Apr 19, 2012
See my file: [URL]
I've made a quick example file ( not as complete as my original file ) But they have the same code.
What i wat is the OrderNr. textbox in the userform to be filled in automatically. When customer 1 orders something new the OrderNr. needs to be 3.
So i've i click on the userform launch button ( command button 1 ) I get my userform with 2 textboxes and 2 command buttons What i press command button 1, i get a new form to select a customer.
Now the part that's missing:
If i press command button 2 i want the textbox of OrderNr. to be filled in automatically with a 3.But it has to be changeable. So if i hit backspace its empty again and i can type 4 ( or what ever ).
View 3 Replies
View Related
Sep 13, 2009
I'm using a form to display records based on a value YSNumber using this
Set tbl = Sheet1.Range("A:A")
Set fnd = tbl.Find(What:=cbo_YSNumber.Value, After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False)
fnd.Activate
Then I display reccord data by populating labels like this:
Label_RequestInstructionID.Caption = ActiveCell.Offset(0, 3)
Label_SchemeTitle.Caption = ActiveCell.Offset(0, 4)
Label_PMO.Caption = ActiveCell.Offset(0, 5)
I'd like to use the spin button to allow the user to cycle up or down the records.
View 9 Replies
View Related
May 13, 2006
can i remove the exit button from a userform
View 2 Replies
View Related
May 13, 2006
i have a userform on sheet 1, is it possible to have a command button to take me to sheet 2 and leave the userform open in sheet 1, so when i go back to sheet 1 the userform is still open
View 4 Replies
View Related
Apr 10, 2007
I have a CLEAR FORM command button
What codes can I use so that when I click CLEAR FORM, all the data that I encoded in the textboxes of my current userform will be erased as if I have a fresh new form?
View 4 Replies
View Related
Jun 17, 2006
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
View 3 Replies
View Related
Aug 15, 2013
How to retrieve the option button value from outside the userform (not inside the userform).
I mean from the main module i want to retrieve the value selected.
E.g.: Optionbutton1 Optionbutton2 Optionbutton3
If i select Optionbutton1 then i want to retrieve this value from outside the userform.
For reference i have attached the excel file wherein I have created the three userforms that is:
1. password (to mask the password
2. ChaseRecons (to use the option buttons)
3. Userform (to display the logo and selet folder option).
In userform Named ChaseRecons i have created three option buttons & want to retrieve the value of these from outside the userform not from the inside.
If i use (If ChaseRecons.optionbutton1.value=true then) its working fine inside the userform but not outside the userform.
View 9 Replies
View Related
Jan 26, 2014
I have two option buttons on a user form, one for a temperature of <250 & one for a temperature >250. I want the option button >250 to be greyed out or have it so that you cannot choose it & option button <250 selected if a certain criteria in a list box is selected. The list box is called Valve_Model & the criteria i want it to work on is if the valve model HPBV Soft is selected & HPBV Soft AC.
View 14 Replies
View Related
Nov 2, 2009
My excel file triggers excel to crash after clicking the only button on my worksheet. The button displays a userform.
However; this does not always happen. It actually drives me crazy as I don't find the solution to my problem. My company were I work upgraded my Excel 2003 SP2 to Excel 2003 SP3 which seemed to help but now the same problem returned...
I found a temporarily workaround though; when saving the file first (right after I opened it) it doesn�t crash when showing the userform. Very strange (to me).
Here is my file: ....
View 6 Replies
View Related
Mar 16, 2012
I have a User form which had a button which redirects me to a certain sheet, e.g. If I wanted to go to stock sheet I would click cmdViewStock and it would open the stock worksheet meaning it works, but the userform still stays open. Is there a way in which once I click the cmdViewStock it opens the Stock worksheet but closes the userform automatically straight after?
Here is the current code I have for the button:
Code:
Private Sub cmdViewStock_Click()
Sheets("Stock").Select
Sheets("Stock").Range("B4").Select
End Sub
View 2 Replies
View Related
Jun 23, 2012
How can I assign 2 different functions on one command button. For example, I want my save button on the form to save the data from the text into a worksheet as well as open a new form.
View 5 Replies
View Related
May 19, 2013
When my worksheet is activated, code is executed which defaults the values in my userform controls. The users enter the appropriate data, and with the clicking of a command button, the data is entered into the worksheet. When that is complete, the idea is to return the user to same form, in a default value so they can enter in new data for submission. This will continue until the user selects the Exit button onthe userform.
Code:
...
With wshairport
.Range("A" & llastrow).Value = uf2.ident
.Range("B" & llastrow).Value = uf2.freq
.Range("C" & llastrow).Value = slocation
.Range("D" & llastrow).Value = slat
.Range("E" & llastrow).Value = slong
End With
Application.EnableEvents = False
uf2.Activate
This is resulting in an 'Object doesn't support this property or method.'
I'm not sure about the appropriateness here of the 'Application.Enableevents=False" here. Since the fields of the userform have change events associated with them, I need to disable that what the userform activation code defaults them.
View 2 Replies
View Related
Apr 3, 2014
Any way to make a button to blink if by the user form?
What I mean: I got a "UserForm", it got 9 buttons and each of them have a macro (everything works perfectly), but is there a way without affecting the current macro for each button, somehow when pressed chosen me button, it flashes while delivering its intended macro?
Sample:
UserForm:
in there
Button
in this button have a macro
Sub blqh_blqh
hfhglhgd
vfdbdfbd
End sub
..........follows another macro to the button flashes................
View 1 Replies
View Related
Feb 6, 2007
most of the users always like to click the close (x) button on the top right of the userform ... and when that happens the application that was set hidden will remains hidden and other users in the network cannot access it ... eventhough i've placed an exit button inside the userform, users still prefer to click the x button.
View 5 Replies
View Related
Nov 8, 2002
I have a User Form that I am trying to open with a button click. I made a copy of one workbook with a new name. The Buttons and Macros were all copied as well. I modified the old Userform so that I can release Version 2 of the Userform, and now when I click on the button in Excel, I get the following error : Object doesn't support this property or method. Run-Time error '438'.
The code assigned to that button is as follows:
Sub Button121_Click()
'
' Button121_Click Macro
' Macro recorded 8/11/2002 by Kale Mayfield
'
UserForm1.Show
End Sub
What am I doing wrong? HELP! Once you have the Userform populated with ComboBoxes,Textboxes, etc., is there now way of making changes to that Userform? If you make changes and rearrange the locations of the buttons and boxes and labels... does that mess up the button in Excel that opens the form to begin with?
View 9 Replies
View Related
Nov 7, 2008
I have a button on my userform that I would like to clear all entries in column B in a sheet called "6 Entries" when pressed
Is there a code for this ?
View 9 Replies
View Related
Nov 21, 2009
I can't find anything direct via the web and here so I will ask what will hopefully be an easy question.
I have a form called FIELD_MX and on this form I have a Command Button called Enter ONT Demand Requirements.
When I click the Enter ONT Demand Requirements, I want to display a form called ONT_Demand_Requirements.
I know the UserForm needs to be initialized, but where should it be or am I wrong?
View 9 Replies
View Related
Dec 26, 2009
I have a userform with two buttons : O.K. and Cancel
When I use the O.K. Button, all is correct, but when I use the Cancel Button, it doesn't work.
What line I have to add, to leave that userform ? (Cancel : CommandButton2_Click()
Sub CommandButton1_Click()
Me.Hide
End Sub
Public Function userChosen()
Me.Show
userChosen = Format(DateSerial(cmbJaar, cmbMaand, cmbDag), "dd.mm.yyyy")
Unload Me
End Function
View 9 Replies
View Related
Dec 4, 2007
Function FindNth(Table As Range, Val1 As Variant,Val1Occrnce As Integer, _
Val2 As Variant,Val2Col As Integer, ResultCol As Integer)
Dim i As Integer
Dim iCount As Integer
Dim rCol As Range
For i = 1 To Table.Rows.Count
If Table.Cells(i, 1) = Val1 And _
Table.Cells(i, Val2Col) = Val2 Then
iCount = iCount + 1
End If
If iCount = Val1Occrnce Then
FindNth = Table.Cells(i, ResultCol)
Exit For
End If
Next i
End Function
To use this function, push Alt+F11 and go to Insert>Module. Paste in the code, push Alt+Q and save. Use the function as shown in graphic example. You can access it under "User Defined" in the Paste Function (Shift+F3).
Type Amount Sex Cost Purchased
Cat 1 Male $ 5.00 22/05/01
Cat 2 Male $ 5.00 15/00/00
Dog 3 Male $ 20.00 25/04/00
Rat 5 Female $ 1.00 15/08/01..................
View 6 Replies
View Related
Feb 13, 2009
Is it possible to add a button to a spreadsheet that "self-destructs" after it is run for the first time? We have several files that compile the results of our testing and analysis that get sent off to various departments for their responses. I want the button to lock/protect the sheets/workbook, add several formulas and perform those calculations, and then delete itself upon completion so we can send the file off the respective department head for their response.
We already have the code for the formulas and to protect the workbook, just wondering about the self-delete part.
View 9 Replies
View Related
