I have a timesheet, with a custom format of [h].mm. In my userform, I have a textbox which I would like to use to enter a time in, but when I run the macro, the time shows up correctly (such as 0.12 for 12 minutes), but it is still calculating as text. I've tried all the various codes I have found throughout the board but nothing has worked so far. I can get as far as making 0.12 minutes show as 12.12.00 AM, but then it shows the whole time instead of the 0.12 which the cell is formatted to do and does not calculate it at the bottom where I grab all the times from that column.
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize() If Not Range("dDate").Value = "" Then TextBox2.Value = Range("dDate").Value TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM") Else TextBox2.Value = "" TextBox2.SetFocus End If End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
I have a user form on which I need to create a textbox every time the user clicks a button. There are too many to create them all in advance and make them visible when needed. The sample attached, from this forum, is good, except, the numbers in the text box just scroll along and I need to see all the text typed into my textboxes. I would like the textboxes to be multiline, wordwrap and have them resize according to the amount of text.
having a different calculations performed within a Textbox on a Userform depending on the selection made in a Combo Box. This was answered here.
Perform Calculation In Textbox On Userform
I have another question regarding this problem, however the thread is closed so I have posted a new thread.
The original question was answered and the solution works very well,however I now need to be able to use the selection from two (2) comboboxes to initiate the various calculations in a similar vain.
have a look at the original thread to get an idea of what I am looking for here.
I have tried many configurations of various code, all of which works to an extent buts which falls over in certain circumstances.
I am making a time sheet for work. It should be very simple but cant get it to work. I want time in, time out, lunch column, and Total. I don't want a lunch in and a lunch out though just a section where I can put my time in :30 minuets :45 or what ever. I also want it to work. on a 12 hour clock AM/PM .
Here are my column's B2 Is Time In C2 is Time out D2 is Lunch time ( decimal ? ) E2 is the TOTAL with lunch deducted.
im in the process of designing a userform but it needs to have some calculations in it, and im lost on how to do it if anyone can help
ie
in textbox1 there is a value of 5 and in textbox2 there is a valuve of 10 and in text box 3 i want to appear textbox1 multiplied by textbox2 so 50 should appear
this is a basic example but as soon i have mastered that i can adapt everything else to my userfom
will the above be done automatically as soon as i enter values or would i have to "make the calculation" via a button or something
and also i want to have a enter button or something like that that copies the data that i have put in the various text boxes to the excel spreadsheet and clear the userform cells
phew thats best i can explain any questions just reply to this post as per the norm
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
I am creating a userform that has multiple calculations in it. I understand how to do this in Excel but I have no idea what the order of operations would be with a user form. (UoM Cost) will = Unit Price / Quantity). The (Ext Cost) field would equal [Quantity x Waste% x UoM Cost (that needs to be calculated before) + Unit Price. (Cost Per Each) would = the "Ext Cost"....that needs to be calculated before / Quantity - Waste%.
Once I have these calculations, then need to click a button to either reset the user for for another record (or if I mess up) and a button to save the record to the excel spreadsheet in the background.
if you look at attachment, in Cell J2, if cell I2 is greater than 2 minutes but less than two minutes, the I need the value of I2 in Cell J2 otherwise 0:00:00 then K2 between 3 & 4 Mins and so on.
I'm currently working on the database for use at work and i would like to improve the code below with couple more functions in my userform.
This code is triggered after i put any value in the textbox then it looks for part number in the "Update" tab and counts how many times this part number appears in column ("Q2:Q") and then depending on count result it shows nothing or "No Sample" in the "Skip" label.
I would like to add some improvements to this code and here comes complicated part:
After i will input any value into the textbox the code should:
1. go to "Database" tab and sum all majors and minors for this part number; Part numbers are listed in the "Database" tab column "F2:F", Majors in column "P2:P", Minors in column "O2:O". Majors and minors are numbers.
2. if this part number has no majors or minors (basically if all cells in column P and O are blank for this part number) proceed with the code below otherwise substract (-) the sum of majors and minors from the count result in the "Update" tab.
For example part number "PN1234567" has been booked 10 times(counts in the Update tab column Q) and we summed 3 majors and no minors for this part number (summing in Database tab columns P and O) it should look like this : 10-3=7, basically we need to do this simple calculation. Of course if we will find more majors and minors then the bookings it should look like that: for example 15bookings-10majors-10minors = -5
3. and finally knowing the final result we can select the case as in the code below.
Code: Private Sub cmdSearchButton_Click() Dim txtbox As String 'stores lookup value Dim x As Variant 'value for wwid txt box Dim ForeName As String Dim SurName As String Dim wwid As Variant Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
I am compiling a simple worksheet that will keep an ongoing track of labour costs in a production environment. The objective is to end up with a labor cost "per unit" for packing punnets of soft fruit.
The source data I have is;
1 - Start time and end time of the job
2 - Any breaks taken during the job
3 - The number of staff it took to do it
4 - The status of the staff (Supervisor, temp, etc) and their hourly pay rates
5 - The number of punnets packed.
With all of the above it should be a relatively simple exercise to calculate the cost per unit (and with a calculator is!). My problem appears to be that I am not formatting something correctly, because when I try to calculate the costs for the employees' my costs are obviously wrong. I have attached my early draft for reference, in the example shown I am showing that a supervisor earning £7.50 an hour worked for 1 hour 15 mins at a cost of £0.39
I have a start time and a stop time, then a difference is calculated in cell L53. I want to subtract the time value of a break but it only works if the entered value is greater than 1:00. I tried K2-I2-L55 and It works but It wont work for times less than 1:00. I need to be able to subtract :15, :30 or any other value in cell L53.
1st problem concerns entering data as text and it being converted to time. I have found the formula 00:00 which does an excellant job of converting. However, when I want to subtract, (=a2-a1) for example, it treats the time as a number. Sometimes it works, but if the hours are different, say 23:30- 22:10, it will subtract 2330-2210! Is there a way to make this work?
2nd problem, related to the first is when I try to avg a column of times, I get a similar effect.
I am trying to track the time the various activities take. I need this in hours:minutes - Monday through Friday. Attached is the spreadsheet that does NOT work. An "x" in the column creates the timestamp in the adjacent column. Some of my formulas are not correct as the calculations do not create the correct data.
i have a tab on the bottom that is labeled "Man hours 2013" i need to pull the information from this sheet and create a new tab that will pull the property name, how many weeks of service, and the total man hours for each property. i will then be adding a column were i enter the monthly price for this contract divided by the number of weeks we serviced to figure out our percentage of gain/loss.
That leaves the cell null if there is no time in the day... If there is time, checks to see if more than 6 hours... If so, deducts 1/2 hour, else does the difference calculation This does work, but is it the elegant or simple way? recommend?
3) At the bottom of each day totals are calculated by this :
=Text((SUM(E5:E36)),"[H]:mm")
This also works to sum the individual totals to the bottom But is this the best way to work with the times?
4) the individual then inputs the Actual Hours worked by the team... And the sheet does a variance calculation between actual hours Worked vs. Scheduled hours...
=TEXT((D38-D39),"[H]:mm")
Now this is a problem...cannot do negative times....need help!
5) Am having a problem with totaling the individuals weekly total using ...
I need to calculate the total hours worked for a series of 22 locations. Each Location has weekly allocated hours ranging form 0 to 80.
For example: User1 worked 4 Hours on Monday at Location1 and 4 Hours at Location2. User2 worked 4 Hours on Monday at Location1 and 4 Hours at Location3.
I am assuming I will need to use VBA for this calculation.
I am currently working on a rota for my work. What I would like to code is that if a shift begins before 8am and finishes after 2pm it automatically deducts an hour for a lunch break. The spreadsheet currently calculates how long a shift is excluding any calculations for breaks, then checks whether that shift is a normal working day for the staff member, and returns the additional hours the staff member worked on that day. Separately, if possible I would like the spreadsheet to colour code each cell. So if a shift starts before 9am the cell fill color to be red, and if a shift begins after 1:30pm for the cell fill color to be dark red.
how to calculate averages and standard deviations based on different time periods without having to manually change the cells?
example: 1st average output at z3, 1st std dev output at z4 data to calculate from c3:c50
2nd average output at z5, 2nd std dev output at z6 data to calculate from c51:c98
3rd average output at z7, 3rd std dev output at z8 data to calculate from c99:c148
and it goes on based on this sequence. i would like to know how to do this without having to change the cells each time i want to calculate. basically what is the quickest way to calculate following this sequence?
I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
I Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is
[Code] ......
But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...
