I'm trying to enter dates in order in excel 2010. But alot faster than manually entering each date. I've tried the date funtions only to be met with errors.
6/9
6/10
6/11
6/12
etc.
where each date is in a new cell.
how to leaved blank cells for missing dates in a series of sequential dates. For example, If my series is (in (m/d/y) format):
1/10/1999
1/12/1999
1/13/1999
1/14/1999
1/17/1999
1/18/1999
But I want it to be:
1/10/1999
(blank cell)
1/12/1999
1/13/1999
1/14/1999
(blank cell)
(blank cell)
1/17/1999
1/18/1999
How do I do this?
I have a pivot table and and struggling to group these by month as well as to sort thee in escending order.
Pivot Table ABC3Row LabelsSum of DebitSum of Credit
413/02/201334367.1822844.19513/03/201326475.492219.66613/08/201230307.613541.2713/09/2012
18898.0318065.4813/10/2012 7210.52913/11/201241969.041767.821013/12/201232844.7724041.26
I need a VBA code for entering dates. The start date cell is A15.When I select cell A15 and hit macro button it inserts todays date and fills in 1-month of dates in column A excluding the weekends...
View 3 Replies View RelatedI have tried many different ways of coming up with a solution of this problem without writing a VBA program, however, Excel's date and time formatting scheme seem to be tripping me up. As a result, I am trying to figure out what direction to go.
I have seached the board up and down looking for a solution and I have found one problem that is midly similar but I do not fully understand the code. I have tried to modify it but to no avail.
Here is my problem:
I have 9 columns of data that are reported in 15 minute intervals for a little over 3 years. There are missing data in the data set and it would be infeasable for me to manually find and replace the missing data. (Over 110000 rows of data)
Example of data (Where "/" delienates column seperation):
Date / Temp 2m / Temp 10 m / Radiation / RH / WindAve / WindMax / WindMin / Rain
6-1-06 12:15 am / 45 / 35 / .0001 / 95 / 5 / 7 / 3 / 0
6-1-06 12:30 am / 45 / 35 / .0001 / 95 / 5 / 7 / 3 / 0
6-1-06 12:45 am / 45 / 35 / .0001/ 95 / 5 / 7 / 3 / 0
6-2-06 6:00 pm / 45 / 35 / .0001 / 95 / 5 / 7 / 3 / 0
6-2-06 6:15 pm / 45 / 35 / .0001 / 95 / 5 / 7 / 3 / 0
So what I need to do is this:
1) Find which data times are missing
2) Add the appropriate amount of rows in between where the missing data would be
3) Add the correct dates to the new rows
4) Add "N/A" to the columns that have no data
You can see that my date and time are formatted in mm/dd/yy hh:mm
I found this on the website and was trying to modify it to my needs:
Sub InsRow()
Dim c
I have a form made that needs to copy a value from another sheet. The Form is 10 rows 5 columns and and in format for easy print. On sheet2 I have a column where each row is filled with a name.
I need to put this name into sheet1, so in the the appropriate cell I put =Sheet2!B2 and it gives me the value (name) from the other sheet.
Then I want to copy the form bellow the 1st one so that I have the same form but with the next name, which means I want =Sheet2!B3 to appear when I copy, but since my form is 10 rows when I copy it the formula copies to =Sheet2!B12 instead of B3.
I need to make close to a thousand of this forms ready for printing and I would like to avoid having to manually set the formula for the next cell.
Let's say I have a column A with a list of dates like this:
02/01/14
02/08/14
01/01/14
06/15/14
04/13/14
05/12/14
01/13/14
04/01/14
06/01/14
I'd like to then write a formula in column B that tells me what number order the corresponding date in column A would be if column A were sorted in chronological order, broken out by month.
So the results would look like this:
02/01/14 0201
02/08/14 0202
01/01/14 0101
06/15/14 0602
04/13/14 0402
05/12/14 0501
01/13/14 0102
04/01/14 0401
06/01/14 0601
So the first two numbers of column B are simply the month, and the last two are telling you whether it's the first, second, third etc chronological date of that month, that is found in the entire list.
If column B needs to be a concatenation of a couple columns of formulas to get to that result, that's fine.
The whole idea behind this is to assume that the data in column A can not/will not be sorted by Excel.
My dates are sorting as per the image below.How do I get them to sort in chronological order (e.g. 01 January, 02 January etc)
Excel Forum.PNG
i have two date lists
list 1 dates a1:a100
list 2 dates b2:b100
i want to extract the date from the two lists mentioned above in on list start from c2 taking in consideration the dates to be in sorting from A-Z when it extracted in the one list
i need formula not a macro
I am trying to do a column full of Month,Year dates in consecutive order (i.e. Jan 14, Feb 14, Mar 14, Apr 14, May 14.)
View 1 Replies View RelatedI have a bit of code (See below) which basically looks at a list of data in rows 10:99 and then finds a date that is between cells c1 and b1. If there is one the it puts that date in if not it leaves cell blank.
[Code] .....
The problem I have now found is that is the dates in the sheet TR rows 10:99 and one of the dates is outside the range so for instance if the range set by c1 and b1 is 10/3/14 - 20/3/14 and in TR there are dates:
12/3/14
08/3/14
it wont return anything but if the dates are
12/3/14
08/3/14
15/3/14
it will return 15/3/14.
Is there anyway that I can change it so it wont return 0 if the last one is outside the range.
i have tried: =VLOOKUP(TODAY()-7,A2:M2000,3) to return data that corresponds to a date 1 week ago. Unfortunatley, it does not work because my dates in the array are in descending order. The order cannot be changed... is there another function I can use to return the value I am looking for?
View 4 Replies View RelatedIn Column B I have dates and in column C I have values correponding to the dates in B.
In Column J I have dates and in column L I have values correponding to the dates in J.
The first date entry in column B and J are equal but after that it is different based on a workday formula adding months, years, days etc. etc.
B31 = 06-apr-09 and J31 = 06-apr-09
B32 = 06-apr-10 and J32 = 06-Oct-09
B33 = 06-apr-11 and J33 = 06-apr-10
B34 = 10-apr-12 and J34 = 06-Oct-10
B35 = 08-apr-13 and J35 = 06-apr-11
B36 = 07-apr-14 and J36 = 06-Oct-11
J37 = 10-apr-12
J38 = 08-Oct-12
J39 = 08-apr-13
J40 = 07-Oct-13
J41 = 07-apr-14
As may notice column B adds 1 year to the previous date while column J adds 6 months to the previous date. (This is changing and B can add 1 month while J adds 3 months etc. etc.
I need a formula in column N that will look at the dates in column B and in column J and list them in column N in ascending order while not taking into account double entries.
In a sheet I enter the following:
... in A1 a year (say 2012)
... in A2 a month, formatting as "MMM" (JAN, FEB, MAR etc.)
How to automatically get in column A (say from A3) all the dates of the month entered, formatting as "D/M/YYYY" (e.g. 1/1/2012, 2/1/2012/ 3/1/2012, etc.)?
Find the sorting method of dates in excel 2010. I have dates in one column and i want to sort it, but I am not able to sort in ascending or descending order.
View 1 Replies View RelatedI looked at threads realted to printing but wasn ot able to find something similar to what I need. So here is my problem:
I have a file with more than 100 worksheets (each sheet contains the invoice for one store). I would like to create a macro that would enable me to determine the order in which worksheets would be printed. How to do it?
Idea #1: the printing order would be based on the value in cell L1 that would contain the route number for each store. Stores belonging to the same delivery route will have the same value in L1. So, the macro should first print all sheets with 1 in cell L1, then print all sheets with 2 in cell L1 and so on...
Idea #2: Creating a separate data sheet with the list of all stores and their corresponding route number. Let's say info is contained in range A1:B150, where Column A contains the name of the stores and column B contains the route numbers. The macro then should look at that list to determine the printing order of the subsequent worksheets (the name of the store in column A would be the same as the name of the worksheet corresponding to that store).
Idea #3: sorting my 150 worksheets manually. It does not solve my problem fully, though, because stores do not always belong to the same route. So the manual sorting should be carried out daily and would not save time at all.
I need a way to re-order an excel worksheets columns based on another worksheet.
Data is extracted from a database into excel however users can configure the columns in the initial system. to how they like This causes problems when the data is copied into an excel spreadsheet I have created as the data copied will not be in the same column order as is required.
How can i reorder the columns without physically having to cut and paste the columns to match?
I have attached a sample spreadsheet.
You will see on the spreadsheet that 'fixed columns' is the order that i require the data however 'variable columns' is not in the same order.
I need a formula to add data in it's respective column, only if the month and year match.
The columns of data will be very long, thousands of lines possibly.
So, basically, in this example.
in O1, if the the data in the columns below match the month(M1) and year (N1), then sum those variables.
I'm just looking to step through some variables using for/next
variable1 = 2
variable2 = 7
Variable3 = 9
Variable4 = 15
For xxx = variable1 to variable4
'all sorts of fun code here
Next xxx
-obviously this doesn't work, it steps from variable1 right to variable 4....need a way so the code includes variable 2 and 3.
I am creating a budget worksheet for non-technical users. They choose a starting month from a drop down menu (already created). I want the remaining 11 months to automatically fill in to the right (in a row). I have created a macro (initiating autofill) that requires them to click the button after they choose the starting month but this copies the drop down menu & Input message from the Data Validation I used to guide them initially.
View 9 Replies View RelatedI have a workbook with two worksheets. Worksheet #1 is a form that will be populated with data and saved as a new worksheet, then cleared and used repeatedly as a master form. Worksheet #2 is a log / register of the unique forms completed and saved from the master each time. I need to assign a unique sequential # to each form when it is saved and record this number in a column on Worksheet #2 (the Log). I am using some macros for the copy work but struggling with the auto-numbering of the forms when completed and saved.
View 3 Replies View RelatedIs it possible in Excel to automatically rename all the tabs of a workbook in one move in a sequential format - eg renamimg 52 weekly tabs Week 1, Week 2, Week 3 etc.
View 2 Replies View RelatedI'm trying to create a single column of stock bin codes for eventual conversion to barcodes. The bin codes run like this:
A1A
A1B
A1C - etc. to A1H, then the sequence starts again with:
A2A
A2B
A2C etc. up to A6H, when the 1st character changes to B and the sequence starts again
This needs to continue until the sequence reaches Z6H
How to do this without having to enter each code manually?
I have a column in which I enter a date, and an adjacent column which automatically enters a sequential number, using ...
View 10 Replies View RelatedI'm making a Purchase Order generator for work. Essentially, the main screen has buttons and the user selects the company, job number, their name etc. They click 'Generate' and it will great a brand new excel file for them with all the correct codes, ready to populate and send to a client. In the main sheet, we also have a master list showing every purchase order made to date. This is where I am currently stuck. I will have many more questions on the way. This is my first program so very new!
Lets say we have the following in cells A1 and A2. The rest is blank:
REQ0001
REQ0002
[Code] .......
I have written some code for a friend of mine, but I cannot test it because I currently don't have a printer attached to this computer. I am confident that it will work, but I would like a second set of eyes to confirm that I havent missed anything.
I have a userform with two textboxes. One of them asks how many copies of the invoice to print out, and the second one asks what invoice number to start with. THe invoice numbers are recorded in Cell I1.
[Code]......
Also, for the future, in a situation like this, is there anyway to test if the code would work without a printer? I tried substituting printpreview, but my computer locked up.
I have a large sheet (currently some 5,000 rows and growing) where each row is allocated a Unique Reference, however that unique reference is based on two criteria, 'Region' and 'Type'.
There are four 'Regions' and three 'Types' across the whole sheet (see attched sample).
Because of the ever increasing number of entries and the fact that the sheet may be sorted so the unique references won't always appear in sequential order, I am looking to try and find a way for the unique refrence for 'new entires' to the sheet to be generated automatically, based on entires in other columns. The sheet structure is relatively simple, with 'Region' shown in one column and 'Type' in another (again, see attached sample).
The unique references adopt this structure - 1st letter of the region (N, S, E or W for North, South, East or West), followed by 1415, followed by the first 4 characters from the 'Type', (REGI, NATI or COUN for Regional, National or County) followed by a sequential 5 digit number 00001, 00002, 00003 etc.
resulting in for example N1415REGI00001 or W1415COUN00012 and so on.
Because there are thousands of entries, I need an automatic way for the unique reference to be generated, ideally once both the 'Region' and 'Type' fields are populated, so the macro (or whatever method works best) will automatically determine the previous highest number for the relevant series and automatically add the next number for the new entry, based on the above criteria.
I don't know if this is possible with a macro or whether there is an easier formulaic way to achieve this?
I have written some code for a friend of mine, but I cannot test it because I currently don't have a printer attached to this computer. I am confident that it will work, but I would like a second set of eyes to confirm that I havent missed anything.
I have a userform with two textboxes. One of them asks how many copies of the invoice to print out, and the second one asks what invoice number to start with. THe invoice numbers are recorded in Cell I1.
In the formula (range, criteria, sum_range), I have a fixed range and a fixed summary range for each column, i.e.: ($F$3:$F$805, "criteria", O$3:O$805).
HoweverI am trying to sum up units by income level (columns D, E, and F) using information from elsewhere on the sheet. I am doing this for each city, which entails changing the criteria for all of the cities I am using three times (once per column).
Is there a simple way to autofill the criteria? They are just names of cities, all in the same column, COLUMN B. Or do I have to type each individual change?
I have four cells that I want to sum: =SUM(D3,H3,L3,P3)
I want to EXCLUDE the cell from the sum if the preceeding cell (C3,I3,K3,O3) has a value of "0".
