Arrange Dates, Asc Order -/- Double Entry
Apr 2, 2009
In Column B I have dates and in column C I have values correponding to the dates in B.
In Column J I have dates and in column L I have values correponding to the dates in J.
The first date entry in column B and J are equal but after that it is different based on a workday formula adding months, years, days etc. etc.
B31 = 06-apr-09 and J31 = 06-apr-09
B32 = 06-apr-10 and J32 = 06-Oct-09
B33 = 06-apr-11 and J33 = 06-apr-10
B34 = 10-apr-12 and J34 = 06-Oct-10
B35 = 08-apr-13 and J35 = 06-apr-11
B36 = 07-apr-14 and J36 = 06-Oct-11
J37 = 10-apr-12
J38 = 08-Oct-12
J39 = 08-apr-13
J40 = 07-Oct-13
J41 = 07-apr-14
As may notice column B adds 1 year to the previous date while column J adds 6 months to the previous date. (This is changing and B can add 1 month while J adds 3 months etc. etc.
I need a formula in column N that will look at the dates in column B and in column J and list them in column N in ascending order while not taking into account double entries.
View 9 Replies
ADVERTISEMENT
Sep 11, 2013
I am having a sheet where I keep track of when online surveys have been sent to users. The users enail address (column K) may be on the list for several times, but I need to make sure that there is at least a 7 days pause between sending the first mail and the second, depending on the visit date (column G).If there are less than 7 days between two entries with the same email address, the user is not qualified for taking another survey.
I was thinking to write an IF formula which returns either 1 or 0 and then let conditional formatting highlight and HIDE the row via a VBA loop.
View 3 Replies
View Related
Feb 1, 2012
i have a huge data in excel some rows has been shifted down ...e.g. from column.AY3200 data shifted down :-in column B3201 & i want arranged that B3201 in AY3200,so .it;s seem like below ..
sssssssssssssssss
ddddddddddsssssssssssssssssss
View 2 Replies
View Related
May 26, 2014
i got data something like this...
m4-1
m4-10
m4-100
m4-2
m4-3
m4-30
i try to arrange it in ascending order...
m4-1
m4-2
m4-3
m4-10
m4-30
m4-100
View 7 Replies
View Related
Dec 25, 2013
This is for a race track. Drivers sign in on one sheet. On that sheet there is 4 different columns. Column 1 lists the division that they race in. Column 2 is the name of the driver. Column 3 is his car #. Column 4 is the number that he draws that decides his starting position. Typically there is 2 heat races per division with the odd number that is drawn being in the first heat and the even number being in the second heat. I created a second sheet called heat races. I am using an index function with a small function with a row. I have my divisions listed separately with 2 heats per division. I want to display the car number per division but lined up by the position that they draw. I have figured out how to display all of the cars per division, but I can't figure out how to separate them by what they draw (odd and even and in order from lowest to highest).
View 1 Replies
View Related
Dec 24, 2008
Here I have some samples of data from row A1:V1 that I want to arrange in ascending order through A4:V4.
For that I’m using the formula below in cell A4 across V4
=SMALL($B$2:$W$2,COUNTA(B2:$W2)-(COUNTA(B2:$W2)-COLUMN(A2)))
Sample data
ABCDEFGHIJKLMNOPQRSTUV11230507801011121314150170192002523400000012357810111213141517192025
But I want to arrange them leaving zeros as shown below in A4:V4
ABCDEFGHIJKLMNOPQRSTUV11230507801011121314150170192002523412357810111213141517192025
View 9 Replies
View Related
Nov 23, 2007
I have built a reporting dashboard to track emplyee efficiency .Within this dashboard i have produced a point scoring league table . I am lookinf for a forula that will automatically work out who my top performers are and arrange them in them in the form of 1st , 2nd ,3rd etc . I believe the answer to lie in the form of a pivot table , perhaps with a macro to populate the data , but would be grateful for come direction
View 3 Replies
View Related
Feb 19, 2010
I have so many part codes in column A with their Group in Column B.I want to arrange in ascending orders only those part codes which have almost matching in Column A with other part codes with different group.Please see the attached file and expected result.
View 4 Replies
View Related
Jun 19, 2014
Trying to arrange numerical values in order from lowest to highest in a column i have a code to do that but i need it to be able to but to a range in the column so it only sorts the values in rows 3 - 60 not all of the rows in the column
Sub Testsort()
Range("A3").CurrentRegion.Select
Selection.Sort Key1:=Range("A3"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
End Sub
View 9 Replies
View Related
Dec 16, 2008
First post here and I hope to find a solution
I have 2 columns with data. The first one has 16000 data (6 digit numbers), which are 2 or 3 or 4 times the same (duplication). The second column has a list with name folders.
Question: How can I delete the duplicate/triplicate entries, and leave only the one I want, according to a priority list I have of name folders?
View 9 Replies
View Related
Mar 12, 2013
i am trying to make a double entry bookeeping system in excel just like VT cashbook and VT transaction
View 3 Replies
View Related
Mar 8, 2013
In cells B4-K28, I would like the cell fill color to turn red if there are more than one entry of the smae persons name.
Example: If I type David in B4 and David in K28, I want both cells to fill in red. Any duplication of names needs to turn red in both cells.
View 6 Replies
View Related
Apr 30, 2013
I have a pivot table and and struggling to group these by month as well as to sort thee in escending order.
Pivot Table  ABC3Row LabelsSum of DebitSum of Credit
413/02/201334367.1822844.19513/03/201326475.492219.66613/08/201230307.613541.2713/09/2012
18898.0318065.4813/10/2012Â 7210.52913/11/201241969.041767.821013/12/201232844.7724041.26
View 3 Replies
View Related
Oct 4, 2013
I have a user form and in my code I am using the Erow function
EROW = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
the form works fine and is loading the data to the spreadsheet and inserting it into the first empty row. I need to reverse the order of entry into the spreadsheet. So instead of the data from the form going into the first empty row down the spreadsheet, I need to insert the data in a common fixed row at the top of the sheet, every time and then shift the older data out of the row and down the sheet. Essentially putting the oldest data at the bottom and the newest at the top, which is reverse of the EROW entry process, Last row command would essentially do the same thing and I don't know what command would do what I want.
View 6 Replies
View Related
Sep 23, 2009
I am building Food Stand Orders Record Table, which I would like to automate and reduce the data entry process as much as possible so that it will take as long to enter all 400 orders into the spreadsheet and mitigate errors and calculate totals. I am looking for ideas as to how to make this easier to update. Also, I am not set on the concept of the spreadsheet, if there is a better way to capture this data.
Below is a list of columns in my Order Record Spreadsheet: My spreadsheet start on A5. The Header row is A5:N5
No. = record input number
Order # = The number of the order taken (i.e. 35306 – 11, 35306 – 12)
Item = The Items sold from each order #
Item Category = Was the item sold a special order or standard order
Date = The date the items and orders were sold
Time = The time the order was taken
Quantity = how many of the item was sold for that order #
Order Taker = record of who (order taker) took the order #
Item Price = What is the price of one unit x the quantity of the item sold
Total Order = What is the total cost of each item price associated with the same order #
Cash Received = We only accept cash, what was the cash tendered with the order#
Change = What is the change amount given to back to the customer associated with the order #
Donation Received = Is the change amount, When customer associated with order# did not accept the Change.
Notes = special notes related to the order#
View 15 Replies
View Related
Sep 16, 2009
B2: =SUMPRODUCT(--(INT('Order Entry'!$B$2:$B$37)=Summary!$A2) )
C2: =SUMPRODUCT( (INT('Order Entry'!$B$2:$B$37)=Summary!$A2) * 'Order Entry'!$A$2:$A$37) / Summary!B2
D2: =MIN(IF(INT('Order Entry'!$B$2:$B$37)=Summary!$A2, 'Order Entry'!$A$2:$A$37))
E2: =MAX(IF(INT('Order Entry'!$B$2:$B$37)=Summary!$A2, 'Order Entry'!$A$2:$A$37))
The overall picture is an order tracking sheet that has start times in column B, end times in column C, number of jobs in an order number in column D and the processing time in column A. On the Summary sheet I have dates listed for each workday.
Next to these dates I am wanting a formula that will traverse through column B of the Custom and Order Entry sheets and provide the number of orders and average processing time that match this. There can be multiple jobs per order number so it needs to order the Sumproduct by column D for each.
View 4 Replies
View Related
Dec 30, 2007
I found the following code which works fine until I start to select multiple cells in cell B for deletion etc. At this point it throws up a run-time error 13 type mismatch, which will cause problems when other people start to use the spreadsheet.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column <> 2 Then Exit Sub
If Target.Offset(0, -1) = "" Then
Target.Select
Application.EnableEvents = False
Target = ""
Application.EnableEvents = True
MsgBox ("You must enter Atlas Part No. first")
End If
End Sub
View 2 Replies
View Related
Apr 30, 2014
I have a double-reference formula, that refers to an assumptions table. The table would be referenced based on a) the product name, and b) the year of the month that is being evaluated. For example, If I want the formula to reference the assumption for Product B in January 2015, then I would like to pull the Product B assumptions from the 2015 assumption list.
View 2 Replies
View Related
Jun 17, 2009
I have a table that shows a row of dates, a row of campaigns, and then a row of values I need to reference. I need to pull the values for a specific date and corresponding campaign.
For example, I need to pull the value for campaign 'notset' on 6/16/09.
I tried the following, but it would only work on the first and last campaign: ...
View 9 Replies
View Related
Jul 16, 2014
Let's say I have a column A with a list of dates like this:
02/01/14
02/08/14
01/01/14
06/15/14
04/13/14
05/12/14
01/13/14
04/01/14
06/01/14
I'd like to then write a formula in column B that tells me what number order the corresponding date in column A would be if column A were sorted in chronological order, broken out by month.
So the results would look like this:
02/01/14 0201
02/08/14 0202
01/01/14 0101
06/15/14 0602
04/13/14 0402
05/12/14 0501
01/13/14 0102
04/01/14 0401
06/01/14 0601
So the first two numbers of column B are simply the month, and the last two are telling you whether it's the first, second, third etc chronological date of that month, that is found in the entire list.
If column B needs to be a concatenation of a couple columns of formulas to get to that result, that's fine.
The whole idea behind this is to assume that the data in column A can not/will not be sorted by Excel.
View 7 Replies
View Related
May 1, 2013
My dates are sorting as per the image below.How do I get them to sort in chronological order (e.g. 01 January, 02 January etc)
Excel Forum.PNG
View 10 Replies
View Related
Jun 16, 2012
I'm trying to enter dates in order in excel 2010. But alot faster than manually entering each date. I've tried the date funtions only to be met with errors.
6/9
6/10
6/11
6/12
etc.
where each date is in a new cell.
View 3 Replies
View Related
Oct 19, 2013
i have two date lists
list 1 dates a1:a100
list 2 dates b2:b100
i want to extract the date from the two lists mentioned above in on list start from c2 taking in consideration the dates to be in sorting from A-Z when it extracted in the one list
i need formula not a macro
View 4 Replies
View Related
Jan 12, 2014
I am trying to do a column full of Month,Year dates in consecutive order (i.e. Jan 14, Feb 14, Mar 14, Apr 14, May 14.)
View 1 Replies
View Related
Mar 20, 2014
I have a bit of code (See below) which basically looks at a list of data in rows 10:99 and then finds a date that is between cells c1 and b1. If there is one the it puts that date in if not it leaves cell blank.
[Code] .....
The problem I have now found is that is the dates in the sheet TR rows 10:99 and one of the dates is outside the range so for instance if the range set by c1 and b1 is 10/3/14 - 20/3/14 and in TR there are dates:
12/3/14
08/3/14
it wont return anything but if the dates are
12/3/14
08/3/14
15/3/14
it will return 15/3/14.
Is there anyway that I can change it so it wont return 0 if the last one is outside the range.
View 14 Replies
View Related
Feb 10, 2010
i have tried: =VLOOKUP(TODAY()-7,A2:M2000,3) to return data that corresponds to a date 1 week ago. Unfortunatley, it does not work because my dates in the array are in descending order. The order cannot be changed... is there another function I can use to return the value I am looking for?
View 4 Replies
View Related
Oct 25, 2011
Find the sorting method of dates in excel 2010. I have dates in one column and i want to sort it, but I am not able to sort in ascending or descending order.
View 1 Replies
View Related
May 30, 2007
I want to create a monthly timesheet which contains 9 columns for
(Date, Day, Project no., Activity, Time In, Time Out, Total Hours, OT Hours, Remarks)
I have used IF Function to calculate Total Hours & OT hours automatically. Time IN & Time OUT, Project No., will be entered manually on daily basis.
Weekday function is used in the Day column to return the corresponding day of the date in the Date column.
Name of the Month and Year will be manually entered in the designated cells I3 and I4 respectively.
Now the solution I am looking for is, the dates should be automatically entered in the Date column (in cells A8 to A38) based on the Month & Year entered in cells I3 & I4. Dates of the corresponding month of the year should only be filled in. (If a month is not having 29, 30 or 31st day, the corresponding cells should be left blank. i.e. nothing should be displayed in the corresponding cells). I am looking for some sort of formula to enter in the cells of Date column (A8 to A38) achieve this. I have searched the forum and could not find anything which could at least give me an idea about the kind of function or formula to be used.
Attached here is the time sheet I am trying to create.
View 8 Replies
View Related
Mar 20, 2014
I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
View 4 Replies
View Related
Nov 29, 2008
I looked at threads realted to printing but wasn ot able to find something similar to what I need. So here is my problem:
I have a file with more than 100 worksheets (each sheet contains the invoice for one store). I would like to create a macro that would enable me to determine the order in which worksheets would be printed. How to do it?
Idea #1: the printing order would be based on the value in cell L1 that would contain the route number for each store. Stores belonging to the same delivery route will have the same value in L1. So, the macro should first print all sheets with 1 in cell L1, then print all sheets with 2 in cell L1 and so on...
Idea #2: Creating a separate data sheet with the list of all stores and their corresponding route number. Let's say info is contained in range A1:B150, where Column A contains the name of the stores and column B contains the route numbers. The macro then should look at that list to determine the printing order of the subsequent worksheets (the name of the store in column A would be the same as the name of the worksheet corresponding to that store).
Idea #3: sorting my 150 worksheets manually. It does not solve my problem fully, though, because stores do not always belong to the same route. So the manual sorting should be carried out daily and would not save time at all.
View 9 Replies
View Related
