Whenever a particular file is saved, and then reopened it says "Error Data Lost" and the entire column that used to have the formulas now has =#NA.
Its only happening in 1 particular column. Anyone know a specific reason this might happen or is something in my code just jacked up?
how do I apply a formula I entered into one cell to all the cells in that column, without going through the tedious process of typing the formula in again in each cell ? I've done it before but don't remember how.
View 2 Replies View RelatedThis is probably a simple one but I can't figure it out. I am building a workbook from scratch. It has about twelve of thirteen tabs at the bottom. On one of the tabs I would like to copy and paste a stand alone worksheet. The worksheet functions properly when it is stand alone. However when I copy and paste the worksheet into this new workbook none of the formulas transfer with it. I do get the cells filled in, but I would like to get the formulas.
I have done this before and it worked fine. In fact I can open a new workbook and copy / paste the worksheet into it and everything works fine. Again when I copy / paste it to this new workbook the formulas do not transfer.
Is there a way to clear the contents of each cell in a range without losing formulas?
View 9 Replies View RelatedThe problem is when I highlight a row with some color the original color of the row is gone, so I tried this code, and again, it's removing the original format and color for the row This is the code from McGimpsey & Associates : Excel : Highlight row with background colors
Code:
PrivateSub Worksheet_SelectionChange(ByVal Target As Excel.Range)
Const cnNUMCOLS AsLong=256
Const cnHIGHLIGHTCOLOR AsLong=36'default lt. yellow
Static rOld As Range
Static nColorIndices(1To cnNUMCOLS)AsLong
Dim i AsLong
IfNot rOld IsNothingThen'Restore color indices
[code].....
How can I retain the range's historical color so that when I deselect the row it reverts properly?
I am running Excel 2007 on Windows Vista Business 32 bit. Recently I have noticed that if I enter a formula into an empty, unsused cell, it is recognized as a formula. If I modify that formula, it is then recognized as text and does not work as a formula. The only way I can get the cell to recognize a formula is to delete the cell and start over. This same scenario does not occur on previously stored workbooks. I have checked all of the flags that I know about, including the Options function.
View 3 Replies View Relatedsample merging file.xlsx
I have a data array of 7 col and 256 rows. I want to focus only on the first 2 columns though. Here is what is going on. In the first column I have numbers from 1-256, these numbers are merged to the appropriate size to accommodate the data in column 2. However, the data in column 2 is not merged, it consists of 1,2, or 3 lines of text. Excel deletes the text in the rows below 1 if I try to merge, excel does not allow multiple row merge selections. What I am looking for is a formula that looks at column 1, finds how many rows are being merged in column 1, then looks at column 2 and identifies the number of rows needed for merging and displays that text in only one row. Basically, it's a formula that merges multiple rows of text in col 2 depending on the number of merged rows in col 1.
No.Customer/Operator
1Fairbanks Morse /
Beloit, WI
2H+H Umwelttechnik /
[Code]....
I would like to remove formulas for an entire workbook at once instead of copying and pasting values sheet by sheet.
View 2 Replies View RelatedSomeone Im working with says she used to change Excel to work on it on some vertical monitor. Is there a way to do that in Excel 2010 or even 2007?
Obviously I'm not talking about print layout, but viewing the whole application in portrait view, as if she turned a monitor sideways and altered the Aps view.
I have a excel 2007 workbook that has 5 sheets "MASTER" , "RED" , "WHITE", "GOLD" & "BLUE". There are 7 columns in each sheet and the master has about 8,000 rows . In column D of each sheet there is a unique number (approx. 8 - 10 digits ) that I would like to at the press of a command button search through sheets "RED" "WHITE" "GOLD" & "BLUE" against the unique numbers in the "MASTER" sheet and if there any duplicates numbers delete the entire row but leave all the data in the master sheet.
View 2 Replies View RelatedI have column A and it has 1000 rows, every row has a number in it, from 5000 to 5200, meaning that some numbers are presented multiple times in column A.
I need to lose repetitions, so every number is in the the table only one time and then I need to convert this one long column into, for example, 9 columns, so there's no wasting of space and have only one column in every page, if printed out.
I'm trying to create a very simple order form. It's been a while since I've done this in Excel, and I couldn't find an answer when I searched. (I may be a lousy searcher, though.)
I want the user to enter a quantity in Column E of the "Common Items" worksheet, and have all the rows with quantities copied to the "Order" worksheet. (On the "Order" copy below, I just did a copy/paste to show the desired effect.)
Excel 2007
A
B
C
D
E
F
1
Item Number
Description
Unit
Price
Qty
Total
2
BX-2B1324X
0.9% NaCL 1000ml Bags
CS
$23.52
5
$117.60
[Code] ....
I'm pretty sure this can be accomplished with an If/Then, but I'm lost! Optimally, they'd enter their quantities, click on the Order sheet and hit print.
I have the attached file that I need in a user form format. Basically the vlookups and calculations (on tab form) should be calculated once users enter A and B into form.
View 2 Replies View RelatedBackground info: I have developed a Hired Equipment Time Sheet with numerous formulas to auto populate and calculate various cells to minimize user impute requirements.
Can cell formulas be toggled on and off to allow manual impute of data rather than the formula automatically populating information in the cell if the need arises? If so, can this be done via a drop down pick? Also can or will the formula still be protected?
I am running Excel 2007.
I have set up a table and for ease of explanantion Column C has a formulas in it to add together the values found in Column A and B.
EG C3 foumula = "=sum(A3+B3)"
Now in cols d & e I have manually entered figures and in colum F I want to add up those figures so F3 should read "=sum(D3+E3)"
In the past I have always been able to just copy the cell C3 and paste it into F3 and the formula would automatically copy and offset the various cells to the correct cells for the new posiitoning.
However, for some reason when I copy the cell, it now pastes the value only into the pasted cell and does not copy the formula, if I click on paste special to try to just copy the formula I now get a pop up asking me if I want to paste as Unicode Text or Text.
I have no recollection of changing any settings.
Is there any Site which is providing the Complete Details with Example of Formulas in Excel 2007.
View 9 Replies View RelatedI often see array formulas written with "extra zeroes", like this: {=SUM(IF(let=1,IF(cost>5,cost,0),0)). Yet I was taught to write the same formula without the zeros, like this: {=SUM(IF(let=1,IF(cost>5,cost))).
My question are:
1) what do the zeroes mean or do?
2) what happens if I replace one or both of the zeros with a different value, like the number one?
Using Microsoft Excel 2007 and all of a sudden, my spreadsheets are not automatically calculating the formulas. It does not matter if I have other workbooks open or not. I still get the problem. It does not happen 100% of the time to make it even more complicated.
- Calulation set to auto in Excel Options.
- No VBA functions being used. I can the worksheet summing 1 + 1 and get the error periodically. It does not have to do with the spreadsheet being too complicated.
- Even if I can hit Ctrl-Alt-F9 to force the formulas to calculate, it won't work.
Suddenly realized that I can't paste formulas. When I copy/paste, it only pastes as values. When I copy and Paste Special, the only option is "Unicode Text". No option for formulas, formatting, or anything else. Excel 2007.
View 4 Replies View RelatedIs it possible to conditional format cells with formulas in Excel 2007. It used to be possible in Excel 2003 but I'm struggling to find this in the new version.
View 6 Replies View RelatedI have a lot of formulas that I don't want to be changed or deleted, but I still want the user to be able to enter data into the cells.
If I use "Protect sheet" I can't select a cell or enter something into it. I sure there is some setting I have to change, but I'm not sure what to select.
I'm using excel 2007
I am running Microsoft Excel 2007 on Windows XP. Right now, I have the standard macro set up that will replace formulas with their values. It's the standard macro that does this for the entire sheet:
Code:
Sub All_Cells_In_Active_WorkSheet_1()
With ActiveSheet.UsedRange
.Cells.Copy
.Cells.PasteSpecial xlPasteValues
.Cells(1).Select
End With
Application.CutCopyMode = False
End Sub
However, with this being a daily task, the issue is that this wipes the formulas out for future dates, which is obviously problematic. To be more specific:
I have one tab (HISTORICAL) with over 200 rows with each business day this year. Columns B through H will pull data from two other tabs (ENTRY1 and ENTRY2) that is entered daily, using a formula that tells Excel to only pull the data for the current date:
Code:
=IF(A224=ENTRY1!B1,ENTRY1!B2,0)
So each day, someone will open this sheet and input their data on the ENTRY1 and ENTRY2 tabs. These numbers will auto populate over to the HISTORICAL tab for that specific day.
Also on each day, someone else will open the sheet and go to the HISTORICAL tab and run the macro that converts the formulas on that sheet to the value.
I want to be able to run the macro only for the row with the current date (and any date before will be fine since those will already be converted anyway).
So, taking today for example, when I run the macro, I want it to convert the data only in the 11/8/2011 and previous rows, but NOT for the 11/9/2011 and later rows.
I am working with Excel 2007 and have an occurring problem when I resize a table. Some of my forumlas copy to the new rows, while others do not. How can I ensure all my formulas copy to the newly created rows. Also sometime when they do copy to the new row an #REF! in the formula where the range should be , yet if I copy and paste the formula from the above row it works.
Here is an example of one of my Formulas Note Sheet1!$J$3:$J$500 is also a table Called Data
=SUMPRODUCT((Sheet1!$J$3:$J$500)*(Sheet1!$A$3:$A$500=$A14&DP$4)) and this is how it is inserted into a new row
=SUMPRODUCT((Sheet1!#REF!)*(Sheet1!#REF!=$A15&DP$4))
Excel 2007 copy/paste is bringing over formula results and not the formula (e.g. Ctrl-c "=A1+B1", Ctrl-v "3").
I've validated my calculation options are set to automatic and that the sheet format is "general", which I saw on older posts.
Perhaps related, when I paste special, I get a different box which only allows me to paste as Unicode Text or Text.
What I have attached is spreadsheet I've built to quickly generate an army list for a tabletop game. Anyone can click on the Force Organization Slot (FOS) and choose the type of unit and from there, select the specific unit name attached to that FOS. Each individual unit has a list of options/upgrades currently attached to the sheet from cells AD through AX and the points cost listed next to each upgrade.
For example, when selecting the Rhino unit from the Dedicated_Transport FOS, there should be 4 drop down lists of selectable upgrades (Storm Bolter, Hunter-Killer Missile, Dozer Blade, and Extra Armor). Currently, I have only named the ranges for the Rhino and Razorback units in order to get this working properly without having to go through the entire list of units and change names/create ranges/ect.
What I'm aiming to do is to create an individual drop down list that is directly related to the Unit Name cell in order to populate a complete and selectable upgrade list for each unit. I have played around with some functions that work in the spreadsheet (see cells X10:X12) but do not work properly with Data Validation.
Oddly enough, when I enter this formula under Data Validation:
=IF($A$3<>$AD$1:$AD$182,VLOOKUP(A3,Options,2,FALSE),"")
I do not get an error, yet the drop down list does not allow me to select anything as I thought it would.
I've got a main workbook (excel 2007) with a main spreadsheet where i group all the information (text and values) about brands and models linked to 10 workbooks (brands) with several spreadsheets (one spreadsheet=one model).
On the main spreadsheet I've got 16 lines for each model which they have the follow formulas, wich are linked to other workbook / spreadsheet (Mar/Gato)
1)
IF(ISERROR(VLOOKUP(V844;[Mar.xlsx]Gato!$A$3:$CE$78;3;FALSE));"";VLOOKUP(V844;[Mar.xlsx]Gato!$A$3:$CE$78;3;FALSE))
and will return text values
2)
IF(ISERROR(VLOOKUP(V844;[Mar.xlsx]Gato!$A$3:$CE$78;82;FALSE));"";VLOOKUP(V844;[Mar.xlsx]G!$A$3:$CE$78;82;FALSE))
And will return number values
3)
IF(M844<>"";HLOOKUP($V$3;[Mar.xlsx]Gato!$A$2:$CE$78;2;FALSE);"")
And will return number values. The return value (;2 goes from 2 to 16.
This process repeats to all the 10 workbooks e and 250 spreadsheets
4) Table Array of the model spreadsheet
With regard to formula 1) and 2)
The problem is that the table array (on the model spreadsheet) could have diferent dimensions (becouse the launch year of the model) like this:
A$3:$CE$78 (2009 - Launch year)
A$3:$BR$78 (2010 - Launch year)
A$3:$BE$78 (2011 - Launch year)
A$3:$AR$78 (2012 - Launch year)
A$3:$AE$78 (2013 - Launch year)
And the return column (value) for formula 1) is always ;3;
And the return column (value) for formula 2) are like this:
;82; (2009 - Launch year)
;69; (2010 - Launch year)
;56; (2011 - Launch year)
;43; (2012 - Launch year)
;30; (2013 - Launch year)
;17; (2014 - Launch year)
The difference between above values is 13, it corresponds 12 months and the total column (12+1)
For the formula 3) the table array its the same, the only difference is instead of starting A$3, starts in A$2
5) The update of the formulas 1) 2) 3) for 2014
I'm doing this manually... The formulas are updated like this,for 2013, I've got table array A$3:$AE$78 and the return value (;17, then for 2014 i will have a table array A$3:$AR$78 and the return value will be (;30, and so on
5) Change the network drive
For other reasons I've to change my files to another network drive, something like this:
Q:KPI2014Main File
6) Main Goal
I was thinking using Excel's regular Find and Replace feature to change:
- The network drive designation
- the table array area
- The return value
But I don't know if this process ( Find and Replace) is safe and clean. I'm doing this manually and I've got on the main worbook/sheet 4000 lines with 3 formulas its 12000 operations!I'm on the 350 line....!
The main goal is to update the all formulas (links) to "brand" workbooks and inside "model" spreadsheets automatically with a macro.
I am using excel 2007 and when I change cells my formulas do not automatically refresh. I have set it to automatic and the calculations will not refresh. How I can force a calculation. I did the control alt f9 and nothing seems to work. Any macro that can force all calculations.
View 4 Replies View RelatedI'm using Excel 2007 and I'm a VBA novice.
Problem: The macro will be assigned to a command button and will be used by laypersons when they finish filling in data on a worksheet in Workbook 1. The sheet contains maybe 30 columns and 50 rows with a mix of fixed values and values generated by Vlookup and Indirect formulas. I need to copy the sheet from Workbook 1 to Workbook 2. Workbook 2 will be for archival purposes so I want to convert all formulas to fixed values. The catch is dealing with some cells that contain hyperlinks to PDF files...
Current Solution: I currently do this with a macro that moves/copies the sheet from Workbook 1 to Workbook 2, it then selects all cells in the new sheet in Workbook 2, copies all cells, then pastes-special "as values" to the exact same cell locations. This works great for me since the cell formatting and data in the sheet are VERY irregular and I have merged cells all over the place. This method keeps the exact formatting I need maintain:
ActiveSheet.Copy After:=Workbooks("Workbook2.xlsx").Sheets(1)
ActiveSheet.Cells.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.CutCopyMode = False
The problem is that a few of the cells have hyperlinks with "friendly names" and I lose the hyperlinks when I convert to values. The hyperlinks are not inserted directly, they are created by a formula, =HYPERLINK("N:Filepath"&C16&".PDF", "Click_For_PDF"), and the row and column that contains the hyper link will vary for each sheet I want to migrate from Workbook 1 to Workbook 2 using this macro. I want to keep the hyperlink active with the clickable friendly name in Workbook 2.
Possible Solution: I'm open to all types of solutions, but is there a way to essentially use my existing macro but AFTER converting to values with paste-special, go back to the original sheet in Workbook 1 that still contains formulas (or maybe a temporary duplicate sheet I migrate to Workbook 2?), search for all cells with a "value" of "Click_For_PDF", copy ONLY those cells and paste (normal) into the corresponding cell locations in the sheet in Workbook 2 that now contains fixed values? ALL of my hyperlinks have the friendly name "Click_For_PDF" so it should be an easy way to identify the hyperlink cells. The cell location of the hyperlink copied in Workbook 1 needs to carry over to Workbook 2 and I said before, the row and col vary with every sheet I want to archive with this macro.
Does anyone have a macro that will delete entire row if column a matches column d
View 6 Replies View RelatedI am working on word documents that has financial numbers on them. I am copying word pages to excel to calculate the numbers by using formulas and etc. I will cut to the chase; is there a way or a macro to insert into an excel template workbook(.xltx) when we open the template there will be a command button to select the word document (which we want to copy its pages) to excel sheets. When a new page begins a new sheet will be created and the page will be pasted on the new sheet.
It is not important if it has to have a command button to select the word document it is ok to run the macro and select the word document and it does not has to populate sheets according to length of word document (I can create lost of free sheets on the template)
The main idea is to gain the time I spend on copying the word document to excel sheets. Some documents can be very long (100 pages). I am using MS Office 2007.
I triend to export data but excel does not allow me to select word documents.